Answer:
It affects the bones
Explanation:
Many inorganic elements are very useful in the body. Many of them carry out diverse important functions and play key roles in parts of the body.
Calcium is essential for strong bones. Hence, any disorder that results from not consuming enough calcium must be connected to the bone.
Therefore, osteoporosis affects the bone.
You are walking from your math class to your science class. You are carrying books
that weigh 20 N. You walk 45 m down the hall, climb 15 m up the stairs, and then
walk another 30 m to your science class. What is the total work performed on your
books?
Answer:
1800J
Explanation:
Given parameters:
Weight of the book = 20N
Total distance covered = 45m + 15m + 30m = 90m
Unknown:
Total work performed on the books = ?
Solution:
To solve this problem we must understand that work done is the force applied to move a body through a certain distance.
So;
Work done = Force x distance
Work done = 20 x 90 = 1800J
Which of the following would reduce wind erosion
Limiting irrigation
Cutting down trees
Planting vegetation
Clearing away dead leaves
A slingshot is fired with an initial velocity of 100 m/s at an angle of 55° follows a parabolic trajectory and hits a stationary balloon at the top of its path. With what horizontal speed does the slingshot pebble hit the balloon?
Answer:
The horizontal speed with which the slingshot hits the balloon is approximately 57.358 m/s
Explanation:
The given parameters of the slingshot motion are;
The initial velocity of the slingshot, v = 100 m/s
The angle (to the horizontal) at which the slingshot is fired makes, θ = 55°
The path of the slingshot which hits the stationary balloon at the top of its flight = Parabolic trajectory
The horizontal component of the velocity = vₓ = v·cos(θ) = Constant
vₓ = 100 × cos(55°) ≈ 57.358
The horizontal speed with which the slingshot hits the balloon = vₓ ≈ 57.358 m/s.
An object with a mass of 5kg is accelerated at
10 m/s^2. Determine the net force on the object.
Answer:
The net force is 50 Newton
Explanation:
Mechanical Force
According to Newton's second law, the net force exerted by an external agent on an object of mass m is:
F=m.a
Where a is the acceleration produced on the object.
We are given the mass of the object m=5 kg and its acceleration [tex]a=10\ m/s^2[/tex].
The net force is:
F = 5 * 10
F = 50 N
The net force is 50 Newton
A 40 kg dog is sitting on top of a hillside and has a potential energy of 1,568 J. What is the height of the hillside? (Formula: PE = mgh)
3.9 m
4.0 m
39.2 m
40.0 m
Answer:
B
Explanation:
A bicyclist moves at a constant speed of 6 m/s. How long it will take for the point bicyclist to move 36 m?
Answer:
6 seconds
Explanation:
make me brainliest
Answer:
Somuchcringe answered correctly you mark him brainliest
Explanation:
At divergent boundaries, hot mantle rock rises and
occurs.
PLEASE HELP!! A 2.0 kg moving cart hits a spring with a spring constant 50.0 N/m. Assume the system is frictionless. When the cart has come to rest, how far has the spring compressed?
Explanation:
A spring has a spring constant, (k), of 3 N/m. It is stretched until it is extended by 50 cm. Calculate the elastic potential energy stored by the spring, assuming it is not stretched beyond the limit of proportionality.
First convert centimetres to metres:
50 cm = 50 ÷ 100 = 0.5 m
Then calculate using the values in the question:
Ee=12 k e2
Ee=12×3×0.52
Ee=1.5×0.25
Ee=0.375 J
describe the importance of measurements in brief.
Answer:
importance of measurement is it gives proper required amount of anything if it will not exist then alot of work be disrupted .In many work measurement is very necessary like in scientific works
How long does it take an object to travel 375 m at a rate of 25 m/s?
Answer:
15s
Explanation:
Given parameters:
Distance traveled = 375m
Speed = 25m/s
Unknown:
Time taken = ?
Solution:
To solve this problem, we make time the subject of the speed equation.
Speed = [tex]\frac{distance}{time}[/tex]
Time = [tex]\frac{distance}{speed}[/tex]
Now insert the parameters and solve;
Time = [tex]\frac{375}{25}[/tex] = 15s
If a steel block has a mass of 25.6 kg and is pushed with a force of 674 N, what is its acceleration after the force is applied?
26.3 m/s^2
17300 m/s^2
26.33 m/s^2
52.3 kg m/s
Answer: 26.3 m/s²
Explanation:
F = mass x acceleration
674 N = (25.6 kg)(a)
674/25.6 = 26.3
a = 26.3 m/s²
Un atleta de helterofilia necesita levantar una barra de pesas, si necesita aplicar una fuerza para levantarla ¿cuales son los variables que intervienen para poder hacerlo?
Answer:
Se necesita la información de las siguientes variables:
(i) Fuerza normal entre los pies y la superficie.
(ii) Masa del atleta de halterofilia.
(iii) Masa de la barra de pesas.
(iv) Aceleración gravitacional.
(v) Fuerza normal entre la barra de pesas y la superficie.
(vi) Aceleración neta del centro de gravedad del sistema.
Explanation:
Sea el conjunto del atleta de halterofilia y la barra de pesas el sistema físico a estudiar. El fenómeno de levantamiento puede modelarse como traslación pura. Por las leyes de Newton tenemos que se necesita las siguientes variables para determinar la magnitud de la fuerza para levantarla (fuerza normal entre la mano y la barra de pesas) se requiere las siguientes variables:
(i) Fuerza normal entre los pies y la superficie.
(ii) Masa del atleta de halterofilia.
(iii) Masa de la barra de pesas.
(iv) Aceleración gravitacional.
(v) Fuerza normal entre la barra de pesas y la superficie.
(vi) Aceleración neta del centro de gravedad del sistema.
Which of these is a result of gravitational lensing?
O the formation of multiple images of the same object
O the bending of light in an accelerating reference frame
O the curvature of space-time
Answer:
Answer is the formation of multiple images of the same object .
Explanation:
I hope it's helpful!
What do u know about how the earths land is formed hint it’s made of rocks
Answer:
it's made of land, rocks, water and many more
Explanation:
if you think about it, mountains are just giant rocks. and the ocean is water and land is... well land
Answer:
Well all Ik is that when the earth was formed it was a big hot rock then the water came in and settled it and the animals kinda became land creatures the yea
Explanation:
Jermaine runs exactly 2 laps around a 400 meter track. At the beginning of her run the clock read 3:02:00 PM. At the end her clock read 3:04:45 PM. Find the distance (d) the person traveled. calculate the speed using distance and total time. find the displacement. calculate the velocity. HELP
Explanation:
Given parameters:
Jermaine runs exactly 2 laps around a 400m track
Start time = 3:02:00PM
End time = 3:04:45PM
Unknown:
Distance traveled = ?
Speed = ?
Displacement = ?
Velocity = ?
Solution:
To solve this problem, we need to find the distance and time first;
Distance = 2 x 400 = 800m
Time taken = 3:04:45PM - 3:02:00PM = 165s
Speed = [tex]\frac{distance}{time}[/tex] = [tex]\frac{800}{165 }[/tex] = 4.85m/s
The velocity of the body is 0m/s and so is the displacement.
This is because the starting and finishing position of the Jermaine is the same.
Luke stands on the edge of a roof throws a ball downward. It strikes the ground with 100J of kinetic energy. Luke now throws another identical ball upward with the same initial speed, and this too falls to the ground. Neglecting air resistance, the second ball hits the ground with kinetic energy of____J
A) Less than 100
B) 100
C) 200
D) More than 200
An object on Earth (g = 9.8 m/s^2) has a weight of 62 N.
1) What is the mass of the object on Earth?
2) What is the mass of the object on Mars?
3) What is the weight of the object on Mars?
(g = 3.7 m/s^2)
Answer:
See the answer below
Explanation:
The weight of a body is defined as the product of mass by the acceleration gravitation of space or place.
1)
[tex]W=m*g[/tex]
where:
m = mass [kg]
g = gravity acceleration = 9.8 [m/s²]
Therefore:
[tex]m=W/g\\m=62/9.8\\m=6.32[kg][/tex]
2)
The mass remains the same regardless of where the object or body is located. That is, the mass will be equal on Mars and on Earth.
3)
We used the same equation to determine the weight, using the Mars gravity constant.
[tex]W=6.32*3.7\\W=23.4[N][/tex]
Why do hot spots form a “chain of volcanoes?
because earth has lava underneath us all and it makes earthquakes and etc things like that
How does a a magnet and paper clips relate to magnetic forces?
Answer:
they relate because one may be metal but they are both metal and they can be strong together if they are connected
Explanation:
they just are
the air flowing over a roof top has a high velocity compared to that flowing underneath. EXPLAIN.
please help me
Answer:
When a fluid flows into a narrower channel, its speed increases. That means its kinetic energy also increases. Where does that change in kinetic energy come from? The increased kinetic energy comes from the net work done on the fluid to push it into the channel and the work done on the fluid by the gravitational force, if the fluid changes vertical position. Recall the work-energy theorem,
There is a pressure difference when the channel narrows. This pressure difference results in a net force on the fluid: recall that pressure times area equals force. The net work done increases the fluid’s kinetic energy. As a result, the pressure will drop in a rapidly-moving fluid, whether or not the fluid is confined to a tube.
There are a number of common examples of pressure dropping in rapidly-moving fluids. Shower curtains have a disagreeable habit of bulging into the shower stall when the shower is on. The high-velocity stream of water and air creates a region of lower pressure inside the shower, and standard atmospheric pressure on the other side. The pressure difference results in a net force inward pushing the curtain in. You may also have noticed that when passing a truck on the highway, your car tends to veer toward it. The reason is the same—the high velocity of the air between the car and the truck creates a region of lower pressure, and the vehicles are pushed together by greater pressure on the outside. This effect was observed as far back as the mid-1800s, when it was found that trains passing in opposite directions tipped precariously toward one another.
Explanation:
I Hope it help mark as Brainlist ↘The air flowing over a roof top which has a high velocity as compared to that flowing underneath. This is because of the increase in the kinetic energy of the air.
What is Kinetic energy?Kinetic energy is the energy which is due to the motion of an object. It is the energy which is present inside the body of an object which is in motion. Kinetic energy undergoes transformation to potential energy when the object comes at rest. The SI unit of Kinetic energy is Joule (J). Kinetic energy is a vector quantity as it has both the magnitude and direction.
When a fluid or other substances such as air flows into a narrower channel, the speed or velocity of the compound increases. This means that the kinetic energy of the substance also increases. This is because, kinetic energy is directly proportional to the velocity of the object.
Learn more about Kinetic energy here:
https://brainly.com/question/26472013
#SPJ2
Describe the disadvantages of using uranium-238 for dating.
Explanation:
Mostly in metamorphic or lava materials is uranium-238 contained. Then no fossil could be estimated utilizing U 238 specifically. They should never be used combined due to the huge variations in the half-life of Carbon 14 with Uranium-238. It is only possible to be using carbon 14 to classify fossil from a very current generation.
As frequency increases ______ decreases
A. Wavelength
B. Amplitude
C. Pitch
D. Volume
Answer:
a
Explanation:
wavelength and frequency are inversely related
Which air mass would form over warm water?(1 point)
maritime tropical
continental tropical
continental polar
maritime polar
Answer:
A.) Maritime Tropical (mT)
Explanation:
Continental tropical is the air mass that forms over warm land.
Maritime Polar is the air mass that forms over cold water.
Continental polar is the air mass that forms over cold land.
So therefore A or Maritime Tropical is the correct answer
PLEASE ANSWER MY QUESTION
Answer:
a) 4
b) 5
c) 2s
d) 10 m/s
e) 5-10m/s^2
want to zøom?
URGENT!!! TIMED!!!
A 130-kg football player runs at a speed of 8.0 m/s toward a 110-kg player who is standing still. After the big player tackles the smaller player, they fall together. With what speed do they fall?
Answer:
v₃ = 4.33 [m/s]
Explanation:
This problem can be solved by the conservation of linear momentum, where momentum is preserved before and after the crash or collision.
For this case, the following equation will be constructed. With values before the collision to the left of the equal sign and after the collision to the right of the equal sign.
[tex](m_{1}*v_{1})+(m_{2}*v_{2})=(m_{1}+m_{2})*v_{3}[/tex]
where:
m₁ = mass of the big football player = 130 [kg]
m₂ = mass of the second football player = 110 [kg]
v₁ = velocity of the big football player before the collision = 8 [m/s]
v₂ = velocity of the second football player before the collision = 0 (who is standing still).
v₃ = velocity of the two players after the collision [m/s]
Now replacing:
[tex](130*8)+(110*0)=(130+110)*v_{3}\\1040 = 240*v_{3}\\v_{3}=4.33[m/s][/tex]
Im struggling on my physics work about velocity
Answer:
53.8
Explanation:
Knowns:
Distance - 1,400
Speed - 52
Unknowns:
Velocity - ?
V = 2([tex]\frac{Distance}{Time}[/tex])
V = 2([tex]\frac{1,400}{52}[/tex])
V = 2(26.9)
V = 53.8
A football is thrown due north across a 40 meter river and it takes 2 seconds to cover that distance.
10. What is the speed of the football in meters per second?
11. What is the velocity of the football in meters per second?
HELP DUE TODAY!!
Answer:
I. Speed = 20m/s
II. Velocity = 20m/s due North.
Explanation:
Given the following data;
Distance = 40m
Time = 2secs
To find the speed;
Mathematically, speed is given by the formula;
[tex]Speed = \frac{distance}{time}[/tex]
Substituting into the equation, we have;
[tex]Speed = \frac{40}{2}[/tex]
Speed = 20m/s.
In physics, we use the same formula for calculating speed and velocity. The only difference is that speed is a scalar quantity and as such has magnitude but no direction while velocity is a vector quantity and as such it has both magnitude and direction.
[tex]Velocity = \frac{distance}{time}[/tex]
Therefore, the velocity is 20m/s due North.
A car travels for 50mph for 5 hours, then for 30mph for another 3 hours in the same direction. What is the average speed the motorcycle traveled?
Answer:
42.5mph
Explanation:
The computation of the average speed is shown below:
As we know that
Speed = Distance ÷ Time
ANd, distance = Speed × time
So, the distance would be
= (50 × 5 hours) + (30 × 3)
= 250 + 90
= 340 miles
And, the total time taken is 8 hours
So, the average speed is
= 340 miles ÷ 8 hours
= 42.5mph
A roller coaster has a velocity of 25 m/s at the bottom of the first hill. How high was the hill?
PLEASE HELP
Answer:
The height of the hill is "31.85 m".
Explanation:
The given value is:
Velocity,
v = 25 m/s
As we know,
⇒ [tex]Kinetic \ energy =Potential \ energy[/tex]
i.e,
⇒ [tex]mgh=\frac{1}{2} mv^2[/tex]
⇒ [tex]gh=\frac{1}{2} v^2[/tex]
⇒ [tex]h=\frac{v^2}{2g}[/tex]
On substituting the given value, we get
⇒ [tex]h=\frac{(25)^2}{2\times 9.81}[/tex]
⇒ [tex]=\frac{625}{19.62}[/tex]
⇒ [tex]=31.85 \ m[/tex]
Given;
Velocity, v = 25 m/sWe know the relation,
→ [tex]Kinetic \ energy (K.E) = Potential \ energy (P.E)[/tex]
or,
→ [tex]mgh = \frac{1}{2}mv^2[/tex]
or,
→ [tex]gh = \frac{1}{2}v^2[/tex]
[tex]h = \frac{v^2}{2g}[/tex]
By putting the values, we get
[tex]= \frac{(25)^2}{2\times 9.81}[/tex]
[tex]= \frac{625}{19.62}[/tex]
[tex]= 31.85 \ m[/tex]
Thus the response above is right.
Learn more about velocity here:
https://brainly.com/question/15447166
PLEASEEE HEPPP!!!!!
Which material would result in the greatest amount of energy transfer?
An absorber that is dark in color and rough.
A reflector that is dark in color and smooth.
An absorber that is light in color and rough.
A reflector that is light in color and smooth.
Answer:
A. The first option: An absorber that is dark in color and rough.
Explanation:
a material absorbs - or transfers the most thermal energy when it is dark in color and rough in texture.
The material that would result in the greatest amount of energy transfer will be an absorber that is dark in color and rough.
What is an absorber?A piece of a substance called an absorber is used to absorb a few of the energy of an incoming particle.
Depending on the application, absorbers can be manufactured of a range of materials, including lead, tungsten, and liquid hydrogen.
The majority of absorbers are found in particle detectors, but they are also utilized in particle accelerators to protect their components from radiation damage.
The material that would result in the greatest amount of energy transfer will be an absorber that is dark in color and rough.
Hence option A is correct.
To learn more about the absorber refer to the link;
https://brainly.com/question/23461193
