a form that contains the values that a user previously entered in the form is called a ____ form.

When there is no established price in the market for a good or service, auctions assist determine its price.

Buyers and sellers might meet in a market to trade goods and services. Usually, the markets determine the prices for goods and services based on supply and demand. However, auctions are routinely used to assess the market value of goods and services where there is no set price. In an auction, bidders contend with one another by raising their prices in an effort to gain the opportunity to purchase a good or service. The bid that finishes the auction with the highest bidder paying the agreed upon amount is the winning bid. This process helps establish the fair market value of the goods or services being offered for auction.

Learn more about Auctions here:

https://brainly.com/question/30279678

#SPJ4

The type of backup that ensures you capture a complete snapshot of everything that makes your computer run is a full backup. The correct option is B.

A full backup is the most fundamental and comprehensive sort of backup process. This sort of backup, as the name implies, copies all data to a storage media, such as a disk or tape.

A full backup is a complete copy of a company's or organization's data assets. This procedure necessitates the backup of all files into a single version. Because it generates a complete replica of the original data set, it is the finest data protection option in terms of speed and simplicity.

Therefore, the correct option is B. Full backup.

To learn more about full backup, refer to the link:

https://brainly.com/question/13121119

#SPJ1

Answer:

b

Explanation:

doesn't perform word processing

Program that will request a String from the user console.log(string.split(""). string.split(b).length - string.split(a).length sort((a,b))

Pass the byte array to the constructor of the String class to create an instance of it. Read the words from the String into an array using the split() technique. Create an integer variable and set its initial value to 0. Then, for each entry of the string array in the for loop, increase the count.

Establish a string. We will loop through the string and count the number of spaces to determine how many words are present because a gap always follows each word. if a space is used to begin a string.

To know more about String visit:-

https://brainly.com/question/14528583

#SPJ4

you can restrict the output from a join to include only certain columns by using the PROJECT command.

A command in computing is a request for a computer program to carry out a certain task. It could be sent using a command-line interface, such a shell, as input to a network service as part of a network protocol, as an event in a graphical user interface brought on by the user choosing an item from a menu, or as a command sent to a computer over a network.

A command is a word or phrase that instructs the computer to carry out a specific action whether typed or spoken. For instance, the user would get a listing of directories and files in the current directory after typing the "dir" command at an MS-DOS prompt and pressing Enter.

Thus, PROJECT command.

For more information about command, click here:

https://brainly.com/question/14548568

#SPJ1

The serve command is a command provided by the Angular CLI (Command Line Interface) tool, which is used to build and serve Angular projects.

As long as the Angular CLI is installed on your machine and you are able to use the command line to launch it, you can use the serve command without being within an Angular project directory. The serve command, however, won't be able to locate the required project configuration files and won't be able to serve the project if you run it outside of an Angular project directory. The serve command must be run after you have navigated to the root directory of your Angular project in order to use it.
The Angular CLI (Command Line Interface) tool, which is used to build and serve Angular projects, provides the serve command.

To know more about Serve kindly visit
https://brainly.com/question/14400610

#SPJ4

Some of the workspaces in Fusion 360 allow users to navigate tasks to specific parts of the software allowing access to specific tools is Patch, Model, Animation, and Assemble.

The Fusion 360 is a software application to aid commercial computer design, computer engineering, computer manufacturing, and printed circuit board.

The Fusion 360 have a feature called workspaces as the virtual space to view, work, and store the data items and task that have common or share the same attributes.

Since the workspaces are based on the same attributes, it allows user to navigate to task specific parts this including workspaces for Patch, Model, Animation, and Assemble.

Your question is incomplete, but most probably your full question was

workspaces in Fusion 360 allow you to navigate to task specific parts of the software allowing access to specific tools. Some of the workspaces in Fusion 360 are:

Learn more about Fusion 360 here:

brainly.com/question/28343272

#SPJ4

The answer is incorrect since current file systems do not put limitations on file path lengths, but the maximum length of any file or directory name is 255 characters or fewer. While file systems may not limit the lengths, an operating system (OS) that uses a file system normally does. There is a 4096 character in Linux.

A file system, often known as a filesystem, is the method by which files are identified and logically stored and retrieved in a computer. Without a file system, stored data would not be separated into discrete files, making it impossible to identify and retrieve.

Here,

The answer is incorrect since current file systems do not impose length limitations on file paths, however the maximum length of any file or directory name is 255 characters or fewer. While file systems may not be limited in length, an operating system (OS) that uses a file system generally is. A 4096 character is available in Linux.

To know more about file system,

https://brainly.com/question/2532502

#SPJ4

The current file systems do not put limitations on file path lengths, but the maximum length of any file or directory name is 255 characters or fewer.

While file systems may not limit the lengths, an operating system (OS) that uses a file system normally does. There is a 4096 character in Linux.

What is file system?

A file system, often known as a filesystem, is the method by which files are identified and logically stored and retrieved in a computer. Without a file system, stored data would not be separated into discrete files, making it impossible to identify and retrieve.

The answer is incorrect since current file systems do not impose length limitations on file paths, however the maximum length of any file or directory name is 255 characters or fewer. While file systems may not be limited in length, an operating system (OS) that uses a file system generally is. A 4096 character is available in Linux.

To know more about file system kindly visit
brainly.com/question/2532502

#SPJ4

IP is not an example of application layer.

IP is an abbreviation for "Internet Protocol," which is a collection of rules that governs the format of data transferred over the internet or a local network. IP addresses, in essence, are the identifiers that allow information to be exchanged between network devices: they contain location information and make equipment available for connection. An internet protocol (IP) address enables computers to send and receive data over the internet. IP addresses are classified into four types: public, private, static, and dynamic. A VPN substitutes your IP address to make it appear as though you are connecting to the internet from a different location: the physical location of the VPN server, rather than your actual location. This is only one of the numerous reasons why so many people utilize VPNs.

Here,

IP is not an application layer example.

To know more about IP,

https://brainly.com/question/16011753

#SPJ4

When you see the above message, you are barred from viewing the appointments page until 12 am EST the next day. It's best to log out and not log back in until 12 a.m. EST the next day.

Logging out means exiting a computer system or a website. Logging out communicates to the computer or website that the current user wishes to terminate the login session. Log out is also spelled log off, sign off, and sign out.

The time between logging in and logging out is the duration of the login session, which is the time during which a user can perform his or her actions. Logging out can be done in two ways: using the log-out option provided by an application or the system, shutting down the computer, or closing an application without explicitly logging out. Some websites will automatically log out a user if the login session has been inactive for an extended period of time.

Learn more about log out here:

https://brainly.com/question/29994711

#SPJ4

commands correctly set the DNS socket pool to a value of 7,000 would dnscmd /Config /SocketPoolSize 7000.

The ls command is the most fundamental and practical command. Our source code files and other important files are frequently organized in particular directories on the system. All folders in the current directory will be shown using the ls command.

A command in a programming language is a special word used to carry out a particular action. For instance, the command "print" can be used to show text on the screen. The command below must be entered and carried out to print "Hello World!" on the screen.

To know more about command visit:

https://brainly.com/question/29627815

#SPJ4

Two-dimensional tables are used in relational databases to organize data.

Entity-relationship diagrams are used by the relational database model to explain the relationships between the data and to store data in (a) two-dimensional tables. Managers need technologies that enable them to use information as a crucial resource and gain a competitive advantage.

Database relational model. The numerous software programs needed to maintain relational databases are referred to as relational database management systems (RDBMS). The information is arranged in two-dimensional tables with rows and columns in this kind of database model, and the relationship is preserved by storing a common field.

To know more about relational databases visit:-

https://brainly.com/question/13262352

#SPJ4

Answer:

The "S" in HTTPS stands for secure and indicates that the secure sockets layer protocol has been applied to the website.

Explanation:

so the answer is B. secure

Answer/conclusion-

secure

Explanation-

The letter "s" in "https" stands for secure, and https stands for hyper text transfer protocol secure.

Choice B.) is the right one

Answer:

c.

Explanation:

Unicode

You can add styles to a shape after you've added it to a slide to alter its default characteristics.

An individual page or image is referred to as a slide in a slide show or slide presentation. A single image, for instance, is regarded as a slide when viewing a slideshow of ten images.

A slide in a presentation or software program like PowerPoint is a page of text, graphics, or animations. Four slides are displayed, for instance, in the slide layout on the right.

Slides, which can also be an acronym for Slides, denotes several slides when used as a plural noun (more than one). The slide is the term used to describe 35mm slide film, which was created in the middle of the 1930s and was popular up until the early 2000s. Since then, 35mm film strips have taken the place of slides.

Learn more about slide here:

https://brainly.com/question/12014793

#SPJ4

A statement that prints "Hello, world" to the screen in Java is given below:

public class Hello

{

public static void main( String [] args )

{

System.out.println( "Hello, world" );

System.exit( 0 );

}

}

Like declaration and string statements, Java statements are directives that tell the computer language what to do.

Basic statements define variables, launch Java methods, or begin blocks of other statements from being executed. Assignment statements give variable values.

The given statement writes and gives the output "Hello World" when run on an IDE.

Read more about java here:

https://brainly.com/question/18554491

#SPJ1

Basic statements set parameters, start Java methods, or stop blocks of other statements from running. Assignment clauses produce variable values.

The Java Statement

public class Hello

{

public static void main( String [] args )

{

System.out.println( "Hello, world" );

System.exit( 0 );

}

}

Because it serves as the starting point for executing a Java program, the Java main method is typically the first method you encounter while learning to program in Java. Any class that is a part of a program may contain the main method, which can contain code to run or call other methods.

Java requires the method name to be followed by a pair of parentheses (), then a semicolon ( ; ). A class's filename must match it ( Main and Main.java).

To know more about java visit:-

brainly.com/question/18554491

#SPJ4

The output at line X will be:

CHILD: -1 0 -1 1 -1 2 -1 3 -1 4

And the output at line Y will be:

PARENT : 0 1 2 3 4

The program shown in Figure 3.35 creates a child process using the fork() function. The child process will execute the code within the if statement, while the parent process will execute the code within the else if statement.

In the child process, the for loop iterates through the array 'nums' and multiplies each element by -1 using the statement nums[i] *= -1. Then, the value of the modified array element is printed out with the printf statement, which contains the string "CHILD: " before it.

After the child process is finished, the parent process uses the wait() function to wait for the child process to finish before it continues executing the code. Then, it iterates through the same array 'nums' and prints out the unmodified values of the array elements with the printf statement, which contains the string "PARENT : " before it.

Therefore, It's worth noting that the initial value of the array is not affected by the modification made in the child process, since both the parent and the child have their own copy of the array, as a result of the memory separation in the fork() call.

Learn more about coding from

https://brainly.com/question/29330362

#SPJ1

The getResults() method produces a string containing either "Throw again," "win," or "lose," and if it returns "throw again," the loop continues, else it breaks.

When I get the "Throw again" command, this code currently leads me into an infinite loop. The loop just calls getResults() once to get the results. However, I'm not sure how to have that loop run the method again and check for the string after each 'Throw again' command. Create a loop that executes a method and returns the results at least once.

public String playCraps() {

       String results;

       do {

           getResults();

           results = getResults();

           System.out.println(results + "\n*************");

       } while (results.contains("Throw again"));

       return "\n*********";

   }

Learn more about string here-

https://brainly.com/question/14528583

#SPJ4

If the return value is "throw again," the loop continues; otherwise, it ends. The getResults() method creates a string that either says "Throw again," "win," or "lose."

What does Javascript's continue in for loop mean?

The continue statement stops the statements in the current iteration of the current or labeled loop from being executed and starts the loop's execution with the subsequent iteration.

public String playCraps() {

      String results;

      do {

          getResults();

          results = getResults();

          System.out.println(results + "\n*************");

      } while (results.contains("Throw again"));

      return "\n*********";

  }

Learn more about continue in for loop

brainly.com/question/15690925

#SPJ4

The correct symbol to use in the comparison in this case would be ">=", which stands for "greater than or equal to".

So the statement should be :

if x >= 5:

The above code tests if the value stored in the variable x is greater than or equal to 5. If the test evaluates to true (meaning x is greater than or equal to 5), the code inside the if block will be executed. If the test evaluates to false (meaning x is less than 5), the code inside the if block will not be executed.

Therefore, It's important to note that other symbols or operations such as ">" (greater than) or "==" (equal to) could be used to test for different values of x . For example, to test if x is exactly equal to 5 you would use "==" instead of ">="

Learn more about coding from

https://brainly.com/question/23275071

#SPJ1

An endless two-dimensional grid of zeros, with coordinates indexed from (1,1) in the bottom-left corner and ascending up the top and right, is the starting point. Given a set of coordinates (r,c) in which r denotes the last row and c the last column

Assume the plate has the following measurements: a b. The plate is heated in some way, and the top and bottom are then insulated. The temperature of the plate at position (x,y) and time t is given by u(x,y,t).

In the language C, a two-dimensional array can be compared to a matrix with rows and columns. A two-dimensional array can be declared using the following generic syntax: An array includes a two-dimensional array.

To know more about dimensional visit:-

https://brainly.com/question/24180383

#SPJ4

Despite the fact that WiFi extenders and mesh networks both increase wireless coverage, mesh networks are far more intelligent, functionally superior, and capable of significantly more WiFi signal expansion.

Mesh Wi-Fi networks, as you may already be aware, combine the 2.4 GHz and 5 GHz bands into a single network. Speed and range are the two main distinctions between 2.4 GHz and 5 GHz frequencies.

Using the 5Ghz spectrum and cutting-edge TDMA techniques, Mesh 4G offers on-street devices high bandwidth connections. It was created in 2003 and has since been implemented in more than 42 towns and cities around the UK.

To know more about mesh networks visit:

brainly.com/question/17648902

#SPJ4

In (x++<10) < i.e., option (B) operator is used first.

An operator is a special symbol used to tell the compiler to perform a mathematical or logical task. There are 5 basic types of operator. These +, -,*, /, ++, % are some t5ype of operators

The precedence of operators is a rule that decided which operator will be solved in an equation with more than one operator. Different operators have different precedence. The higher precedence operator is evaluated first.

The order of precedence goes from unary operators to multiplicative operators to additive operators to shift operators to relational operators to equality operators and so on.

To know more about operators visit:

https://brainly.com/question/20468080

IP is a network layer protocol, TCP and UDP are transport layer protocols, while SMTP and HTTP are application layer protocols, according to the remaining answers.

TCP/IP, or the Internet protocol suite, is a framework for arranging the variety of communication protocols used in the Internet and related computer networks based on functional requirements. TCP/IP is an abbreviation for Transmission Control Protocol/Internet Protocol, and it refers to a set of communication protocols used to link network devices on the internet. TCP/IP is also used in a private computer network as a communications protocol (an intranet or extranet).

Here,

IP is a network layer protocol, TCP and UDP are transport layer protocols, while SMTP and HTTP are application layer protocols.

To know more about TCP/IP protocols,

https://brainly.com/question/30114641

#SPJ4

The correct answer is a) IN operator could be used in place of INTERSECT if the DBMS does not support it.

You may define several values in a WHERE clause by using the IN operator. The numerous OR conditions are abbreviated as the IN operator. The IN operator makes it simple to determine whether an expression fits any of the values in the list of values. In SELECT, INSERT, UPDATE, or DELETE, it is used to do away with the requirement for numerous OR conditions. The rows in your list can also be excluded using NOT IN. In a SQL expression, an operator is a reserved word or character that is used to query our database.

To learn more about DBMS click the link below:

brainly.com/question/28813705

#SPJ4

Protecting castle walls consumes the most of an organization's it security budget.

The wall enclosing the outside ward was known as the outer curtain. The region surrounding and next to the inner curtain is referred to as the outer ward. In the absence of a permanent stone wall, a palisade is a strong timber fence that is typically built to enclose a property.

A battlement is a structure used in construction that serves as an attack deterrent on top of castle or fortress walls. In the past, battlements were often short walls that sat above a castle's outermost walls.

To know more about castle walls visit:-

https://brainly.com/question/11681798

#SPJ4

A perceptive system enables a computer to simulate how a person might see, hear, and feel certain objectives.

A knowledge base, a search or inference engine, a knowledge acquisition system, and a user interface or communication system are the four main parts of an expert system.

An expert system is a piece of computer software that mimics the decisions and actions of a person or group of individuals who have expertise and experience in a particular field. Expert systems use artificial intelligence (AI) techniques to do this. Expert systems are frequently created to complement human specialists rather than to take their place.

To know more about artificial intelligence visit:-

https://brainly.com/question/23824028

#SPJ4

Microsoft Access automatically establishes 1:1 associations between tables. In Microsoft Access, the Indexed property of the foreign key column needs to be set to Yes in order to build a 1:1 relationship (No Duplicates).

A foreign key aids in defining the connection between tables. In a relational database, this special key transmits one or more relationships between two or more tables.

The information in one table in a relational database (Access) is connected to the information in other tables. Tables can typically relate to one other in one of three ways: one-to-one, one-to-many, or many-to-many. Information between tables is cross-referenced using the relationship.

To know more about Microsoft Access visit:-

https://brainly.com/question/26695071

#SPJ4

The correct answers are as follows:

A. LDAP.

B. SQL database.

C. Flat file.

D. Active Directory.

A networking (client/server) protocol called Remote Authentication Dial-In User Service (RADIUS) was created to give its end users centralized authentication, authorization, and accounting (AAA) of remote network services via dial-up networking and a virtual private network (VPN).

RADIUS is hence often a client/server protocol that is set up to operate at the application layer of either the user datagram protocol (UDP) or the transmission control protocol (TCP).

In this example, a network administrator wants to provide remote access for five (5) user accounts to connect corporate laptops to an office access point using the RADIUS protocol.

Therefore, a SQL database would be the internal source that would be most suitable to store these five (5) user accounts in.

A domain-specific language created and developed for the management of varied data stored in a relational (structured) database is known as SQL, which stands for the structured query language.

A SQL database, then, is an internal source that consists of tables used to store a certain volume of structured data, such as the five (5) user accounts.

Therefore, the correct answers are as follows:

A. LDAP.

B. SQL database.

C. Flat file.

D. Active Directory.

Know more about Remote Authentication Dial-In User Service (RADIUS) here:

https://brainly.com/question/15397099

#SPJ4

You can run a block of code multiple times using loop control statements, looping back through to the block and tracking the progress of each iteration.

Despite having to compose the same (perhaps lengthy) instructions every time you wanted your software to carry out a task, loops let you repeatedly perform a procedure. FOR LOOPS and During LOOPS are two popular types of loops.

A loop is still a programming construct that repeatedly executes a sentence or condition within predetermined bounds. In all programming languages, the loop function employs logic and syntax that are essentially equivalent.

To know more about loop visit:

https://brainly.com/question/14913569

#SPJ4

A(n) enterprise database is designed to support a company’s day-to-day operations.

In computer and technology, An enterprise database generally can be described as a database that used by large organizations and enterprises  to manage their huge collection of data. An enterprise database is used by a company or organization to improve their efficiency. There are several types of database, such as Flat Model, Network Model. Relational Model, Hierarchical Model, Dimensional Model. There are several examples of database, there are MySQL, SQL Server,  Informix, Sybase, MongoDB, Oracle Database, PostgreSQL.

Here you can learn more about enterprise database https://brainly.com/question/4559986

#SPJ4