Answers
If a ray of light travels from air into a liquid, as shown in figure below. The ray is incident upon the liquid at an angle of 30.0°. The angle of refraction is 22°, and the refractive index of the liquid would be 1.334.
What is refraction?It is the phenomenon of bending of light when it travels from one medium to another medium. The bending towards or away from the normal depends upon the medium of travel as well as the refractive index of the material.
By using Snell's law,
Refractive index of the liquid = sin(i) /sin(r)
=sin(30) /sin(22)
= 1.334
Thus, the refractive index of the liquid would be 1.334.
To learn more about refraction, refer to the link given below ;
brainly.com/question/13088981
#SPJ1
Related Questions
When an object falls through air, there is a drag force that depends on the product
of the surface area of the object, and the square of its velocity, i.e. F=CAv2
, where C
is a constant, determine the dimension of C and its SI unit
Answers
The dimensions and unit of C from the expression above is [ML^-3] and kgm^-3
What is dimension and units ?
Despite the fact that the solution to any engineering problem must incorporate units, dimensions and units are frequently misunderstood. While units are arbitrary names that are correlated to certain dimensions to make it relative, dimensions are tangible quantities that can be measured (e.g., a dimension is length, whereas a metre is a relative unit that describes length). Through a conversion factor, all units for the same dimension are related to one another.
given in question drag force depends upon the product of the cross sectional area of the object and the square of its velocity
and drag force can be given by
F = CAv^2 ----------- (1)
It is given that
Dimension of mass = [M]
Dimension of length = [L]
Dimension of time = [T]
So, by using above dimension we can write
the dimension of force,
F = [ MLT^-2]
dimension of cross-section area,
A = [L^2]
and dimension of velocity
v = [LT^-1]
now, by putting these values in equation (1), we will get
F = CAv^2
[ MLT^-2] = C[L^2][LT^-1]^2
C = [ML^-3T^0]
C = [ML^-3]
The dimensions and unit of C from the expression above is [ML^-3] and kgm^-3
Learn more on Units and Dimension from the given link
brainly.com/question/28464
#SPJ9
Hence, the dimension of constant C will be,
The idea that our solar system formed from an interstellar cloud of dust, hydrogen,helium and other ionized gases is known as what theory?A. Big Bang TheoryB. Geocentric TheoryC. Nebular Hypothesis Theory
Answers
Given:
The solar system formed from an interstellar cloud of dust, hydrogen,
helium and other ionized gases.
To find:
The name of the theory tells us the fact
Explanation:
The Sun and all the planets of our Solar System began as a giant cloud of molecular gas and dust. The nebular hypothesis tells us about this theory.
Hence, the correct answer is 'The nebular hypothesis theory'.
A heart defibrillator passes 10.3 A through a patient's torso for 5.00 ms in an attempt to restore normal beating.(a) How much charge passed?(b) What voltage was applied if 492 J of energy was dissipated?KV(c) What was the path's resistance?ΚΩ(d) Find the temperature increase caused in the 8.00 kg of affected tissue. The specific heat of tissue is 3500 J/(kg. °C).°C
Answers
a) The formula for calculating the quantity of charge is expressed as
Q = IT
where
Q is the quantity of charge
I is the current
T is the time
From the information given,
I = 10.3
T = 5 ms = 5 x 10^-3 s
Q = 10.3 x 5 x 10^-3
Q = 51.5 x 10^- 5 C
The quantity of charge passed is 51.5 x 10^- 5 C
b) The formula for calculating the energy is expressed as
E = I^2RT
where
R is the resistance
E is the energy
From the information given,
E = 492 J
Thus,
492 = 10.3^2 x R x 5 x 10^-3
R = 492/(5 x 10^-3 x 10.3^2)
R = 927.514 ohms
Voltage, V = IR
Voltage = 10.3 x 927.514
Voltage = 9553.398 V
We would divide by 1000. It becomes
Voltage = 9.553 KV
c) From the calculations,
Resistance = 927.514 ohms
We would divide by 1000. It becomes
Resistance = 0.93 ΚΩ
d) Let the temperature increase be t
mass of tissue, m = 8 kg
Specific heat of tissue = 3500 J/(kg. °C).
°C
The formula for calculating the quantity of heat is
H = mcθ
where
H is the quantity of heat
From the informtaion given,
H = 492
θ = t
Thus,
492 = 8 x 3500 x t
t = 492/(8 x 3500)
t = 0.018
The temperature increase is 0.018 degrees
A person pushes a 500 kg crate with a force of 1200 N and the crate accelerates at .5 m/s^2. What is the force of friction acting on the crate?
Answers
The force of friction acting on the crate is 950 N.
What is force of friction?Force of friction is defined as the force that opposes the motion of an object when two surfaces are in contact.
The frictional force on the object is determined by applying Newton's second law of motion as shown below.
F - Ff = ma
where;
F is the applied force = 1200 NFf is the frictional forcem is the mass of the crate = 500 kga is the acceleration of the crate = 0.5 m/s²1200 - Ff = 500(0.5)
1200 - Ff = 250
Ff = 1200 - 250
Ff = 950 N
Thus, the force of friction acting on the crate preventing the motion of the crate is determined by applying Newton's second law of motion.
Learn more about force of friction here: https://brainly.com/question/4618599
#SPJ1
A traffic light hangs from a pole as shown in (Figure 1). The uniform aluminum pole AB is 7.20 m long and has a mass of 11.0 kg . The mass of the traffic light is 22.0 kg .
-Determine the tension in the horizontal massless cable CD.
-Determine the vertical component of the force exerted by the pivot A on the aluminum pole.
-Determine the horizontal component of the force exerted by the pivot A on the aluminum pole.
Answers
There is a 409.30 N force in the horizontal massless cable CD.
The vertical component of the pivot A's force on the aluminum pole, which is 323.73N.
The force that the pivot A applies to the aluminum pole has a horizontal component of 409.30 N.
Force is any influence to the motion of the body .
Basically the product of mass and acceleration.Length of the pole = 7.20 m
Mass of the pole = m = 11.0 kg
Mass of the traffic light = M = 22.0 kg
Let the length of the rod AD be L
Also [tex]Lsin\alpha = 3.8[/tex]
[tex]\alpha = 37[/tex]°
[tex]Sin\alpha = 0.602[/tex]
L = [tex]\frac{3.8}{0.602}[/tex]
L = 6.312 m
In order to determine the tension (T) in the cable, the free body diagram will give the detailed information.
On balancing all the forces in both the 'x' and 'y' direction, i.e. summation of all the forces in 'x' and 'y' direction must equal to zero.∑[tex]F_{x}[/tex] = 0
[tex]R_{x}[/tex] - T = 0
[tex]R_{x}[/tex] = T
∑[tex]F_{y}[/tex] = 0
[tex]R_y- W_p - W_l = 0[/tex]
[tex]W_p[/tex] = 9.81 * 11 = 107.91 kg
[tex]W_l\\[/tex] = 9.81 * 22 = 215.82 kg
[tex]R_y\\[/tex] = [tex]W_p + W_l[/tex]
[tex]R_y\\[/tex] = 107.91 + 215.82
[tex]R_y\\[/tex] = 323.73 N
The vertical component of the force exerted by the pivot A on the aluminum pole is 323.73 N
Taking moment along x-axis
M = 0
[tex]Th-mgCos\alpha* \frac{1}{2} - mglCos\alpha[/tex] = 0
T = [tex]\frac{glCos\alpha }{h} *\frac{m}{2}*M[/tex]
T = 409.30 N
The tension in the horizontal massless cable CD is 409.30 N
[tex]R_{x}[/tex] = T = 409.30 N
The horizontal component of the force exerted by the pivot A on the aluminum pole is 409.30 N.
To know more about Force,
https://brainly.com/question/28106997
#SPJ1
Can you tell me the types of thermal processes and there meanings
Answers
Isothermal process: Temperature remains constant
Adiabatic process: No heat is exchanged to or from the system.
Isochoric process : Change in volume is zero.
ISobaric process : Pressure remains constant .
Sean and Greg are on a job site standing on two beams 11.0 ft apart. they need to lift their crate of tools midway between them with ropes up 33.5 ft to where they are working. (a) What is the angle between the ropes when the crate is on the ground? (b) How much force do Sean and Greg need to exert on the ropes when lifting the 115-lb crate off the ground? (c) How much force do both Sean and Greg need to exert when the crate is 5.75 ft below them? (d) Explain why the force to lift the crate changes as it moves closer to them crate is 5.75 ft below them? (d) Explain why the force to lift the
crate changes as it moves closer to them.
Answers
a ) The angle between the ropes when the crate is on the ground = 18.4°
b ) Force exerted by Sean and Greg = 260.8 N
c ) Force exerted when the crate is 5.75 ft below them = 354.9 N
a ) The angle between the ropes,
Distance between crate and a person = 33.5 ft
Distance between Sean and Greg = 11 ft
Consider only one person side of the rope and the midway point between Sean and Greg. This forms a right angled triangle.
sin θ = 5.5 / 33.5
θ = [tex]sin^{-1}[/tex] ( 0.16 )
θ = 9.2°
Angle between the ropes = 2 θ
Angle between the ropes = 2 * 9.2
Angle between the ropes = 18.4°
b ) Force exerted,
Since both ropes pull the same amount of weight for the same amount of distance, their tensions will be equal,
T = T1 = T2
Resolving the tension into its horizontal and vertical component.
[tex]T_{y}[/tex] = T cos θ
[tex]T_{x}[/tex] = T sin θ
Since there is not time component mentioned assuming the crate is pulled at a constant velocity. Therefore acceleration will be zero and hence net force in vertical direction will be zero.
m = 115 lb = 52.16 kg
∑ [tex]F_{y}[/tex] = 0
T cos θ + T cos θ - m g = 0
2 T cos 9.2° = 52.16 * 9.8
T = 511.17 / 1.96
T = 260.8 N
c ) When the crate is 5.75 ft below them,
tan θ = 5.5 / 5.75
θ = [tex]tan^{-1}[/tex] ( 0.96 )
θ = 43.8°
∑ [tex]F_{y}[/tex] = 0
T cos θ + T cos θ - m g = 0
2 T cos 43.8° = 52.16 * 9.8
T = 511.17 / 1.44
T = 354.9 N
d ) The force to lift the crate changes as it moves closer to them is because in a shorter cable the horizontal force increases and the vertical force decreases. So it becomes harder to pull as it gets closer to the destination.
Therefore,
a ) The angle between the ropes when the crate is on the ground = 18.4°
b ) Force exerted by Sean and Greg on the ropes when lifting the 115-lb crate off the ground = 260.8 N
c ) Force exerted by Sean and Greg when the crate is 5.75 ft below them = 354.9 N
To know more about tension
https://brainly.com/question/17073019
#SPJ1
choose the 200 kg refrigerator. set the applied force to 400 n (to the right). be sure friction is turned off. what is the net force acting on the refrigerator?
Answers
Answer:
Explanation:
Ginen:
m₁ = 200 kg
F₂ = 400 N
g ≈ 10 m/s²
__________
R - ?
F₁ = m₁·g = 200· 10 = 2000 N
R = √ (F₁² + F₂²) = √ ( 2000² + 400²) ≈ 2040 N
The net force acting on the refrigerator having a mass of 200 kg and the applied force to 400 n (to the right) is 2040 Newtons.
What is force?Force is the influence of either pull or pushes in the body. Basically, gravitation forces, nuclear forces, and friction forces are the types of forces. For e.g. when the wall is hit by a hand then a force is exerted by the hand on the wall as well as the wall also exerts a force on the hand. There are different laws given to Newton to understand force.
Newton is a unit of force used by physicists that is part of the International System (SI). The force required to move a body weighing one kilogram one meter per second is known as a newton.
Given:
The mass of the refrigerator, m = 200 kg,
The force, F = 400 N,
Calculate the net force by the formula given below,
F = m × g
here, g is the gravitational acceleration.
Substitute the values,
F= 200 × 10 = 2000 N
[tex]R = \sqrt{F_1^2 +F_2^2}[/tex]
where R is the net force
[tex]R = \sqrt{2000^2 +400^2}[/tex]
R = 2040 Newton
Therefore, the net force acting on the refrigerator having a mass of 200 kg and the applied force to 400 n (to the right) is 2040 Newtons.
To know more about Force:
https://brainly.com/question/13191643
#SPJ12
Can all rocks be dated with radiometer methods? Explain
Answers
Answer: No.
Explanation:
Radiometer dating is used on igneous rocks.
Unlike the other two rock types, sedimentary annd metamorphisis, all igneous rocks possess one specific age/ time of origin.
What is absolute zero?0k0c273-100
Answers
The absolute zero is measured in Kelvin scale
Thus absolute zero is 0K.
An air compressor has a volume of 100.L What volume of gas is pumped into the tank if the pressure goes from 750 torr to a pressure of 145 psi?Remember to convert pressure to atm. Refer to picture for conversions if needed.
Answers
ANSWER:
1000 L
STEP-BY-STEP EXPLANATION:
The first thing is to convert the unit of both pressures to atm, with the help of the conversion equivalences shown, just like this:
[tex]\begin{gathered} P_1=750\text{ torr }\cdot\frac{1\text{ atm}}{760\text{ torr}}=0.987\text{ atm} \\ P_2=145\text{ psi }\cdot\frac{1\text{ atm}}{14.7\text{ psi}}=9.87\text{ atm} \end{gathered}[/tex]Now, applying Boyle's Law, we calculate the value of the volume, like this:
[tex]\begin{gathered} P_1\cdot V_1=P_2\cdot V_2 \\ V_1=\frac{P_2\cdot V_2}{P_1} \\ \text{ replacing} \\ V_1=\frac{9.87\cdot100}{0.987}_{} \\ V_1=1000\text{ L} \end{gathered}[/tex]The volume of gas is 1000 L
An Alaskan rescue plane traveling 37 m/s
drops a package of emergency rations from
a height of 153 m to a stranded party of
explorers.
The acceleration of gravity is 9.8 m/s².
Where does the package strike the ground
relative to the point directly below where it
was released?
Answers
Throught the given statement, the package strike the ground at the vilocity = -57.04 m/s
What is the meaning of velocity?The direction of the movement of the body or the object is defined by its velocity. Most of the time, speed is a scalar quantity. In its purest form, velocity is a vector quantity. It measures how quickly a distance changes. It is the rate at which displacement is changing.
we get,
y = 0m
y0 = 166m
v0y = 0 m/s
g = 9.8 m/s^2
t = ?
Now, solving for t,
y = y0 + v0y×t - (0.5)gt²
0 = 166 - (0.5)(9.8)t²
t = 5.82 s
Now that we have time, we can use the equation to solve for the range.
x = vx(t)
x = (40)(5.82)
x = 232.8 m
v = v0y - gt
v = 0 - (9.8)(5.82)
v = -57.04 m/s
To know more about velocity visit:-
brainly.com/question/18084516
#SPJ13
Fill in the blank: 66 in. = yd
Answers
Answer: 1.833
Explanation:
Multiply the value in inches by 0.027777777777727 (the conversion factor)
So 66 inches*.027777777777727=1.833 yards
Answer:
66inches = 1.833 yards
Explanation:
carts, bricks, and bands
Which one of the following changes would increase the amount of mass?
a. Increase the number of bricks resting upon the cart.
b. Increase the number of bands that are used to pull the cart.
c. Decrease the number of bands that are used to pull the cart.
d. Use a cart that is identical in every way, except for the color that it is painted.
Answers
The change that would increase the amount of mass is Increase in the number of bricks resting upon the cart. That is option A.
What is mass?Mass is defined as the amount or quantity of matter that makes up an object which can be measured in grams and Kilograms.
The mass of an object is dependent on the change of its weight, that is, an increase in the weight of an object increases its mass.
Since the bricks had the same mass as the cart, adding one brick to the cart would double the mass of the object. Adding two bricks to the cart would triple the mass of the object.
That is to say, when more bricks are being laid on the cart, it's weight increase leading to an increase in its mass also.
Therefore, it can be concluded that increase the amount of mass is Increase the number of bricks resting upon the cart.
Learn more about weight here:
https://brainly.com/question/25973294
#SPJ1
carts, bricks, and bands
8. What acceleration results when 2 rubber bands stretched to 20 cm are used to pull a cart with three bricks?
a. About 0.25 m/s2
b. About 0.33 m/s2
c. About 0.50 m/s2
d. About 1.00 m/s2
Answers
A. The acceleration results when 2 rubber bands stretched to 20 cm are used pull a cart with three bricks is 0.25 m/s².
What is the applied force on an object?The force applied on object is obtained by multiplying the mass and acceleration of the object.
According to Newton's second law of motion, the force exerted on an object is directly proportional to the product of mass and acceleration of the object.
Also, the applied force is directly proportional to the change in the momentum of the object.
Mathematically, the force acting on object is given as;
F = ma
a = F/m
where;
a is the acceleration of the objectm is the mass of the objectF is the applied forceFrom the trials, the acceleration results when 2 rubber bands stretched to 20 cm are used pull a cart with three bricks is 0.25 m/s².
Learn more about acceleration here: https://brainly.com/question/14344386
#SPJ1
Can you please tell me the definition and give a example/formula of the first law of thermodynamics
Answers
We will have the following:
The first law of Thermodynamics:
Energy cannot be created or destroyed, it can only be transformed.
An example is when a car suddenly breaks in order to avoid hitting a person, here the velocity of the car, all the energy that is acumulated is transformed into thermal energy and it disipated by the friction of the breaks and the tires. The total energy of the system will remain the same, but it will change the way the energy is present. This as per our understanding of the universe so far.
The acceleration of gravity depends on (click all that apply)
Answers
The expression for the acceleration due to gravity can be given as,
[tex]g=\frac{GM}{R^2}[/tex]Here, g is the acceleration due to gravity, G is the gravitational constant, M is the mass of planet and R is the distance from the center of planet.
Therefore, the acceleration due to gravity depends upon the distance from center of planet and the mass of planet.
Convert the following number from scientific notation to standard notation1.9300 x 10^-30.000 193 000.001 93000.001931930
Answers
The number converted to the standard notation as
[tex]1.93\times10^{-3}=0.00193[/tex]Hence, the correct answer is 0.00193
Changes of state occur at segment _____________ and segment_______________.1st blankA-BB-CC-D2nd blank C-DD-EE-F
Answers
The change of phase takes place when the amount of heat added is changing the state and the temperature of the system remains constant.
In the given graph, the ice is changed into the water state through segment B-C.
Then the water is changed into a water vapor state in the segment D-E.
Hence, changes of state occur at segment B-C and segment D-E.
A force of 10 Newtons is the only force exerted on a block, and the acceleration of the block is measured. When the same force is the only force exerted on a second block, the acceleration is three times as large. What can you conclude about the masses of the two blocks?
Answers
When the acceleration is three times as large, the mass of the new block will be one-third the initial mass.
What is the acceleration of the block?
The acceleration of the block is the rate of change of velocity of the block with time.
The magnitude of the acceleration of each block can be obtained by applying Newton's second law of motion as follows;
F = ma
m = F/a
where;
m is the mass of each blockF is the applied force = 10 Na is the acceleration of each block.When the acceleration is three times as large, the mass of the new block is calculated as;
m = F/3a
m = 1/3 (F/a)
new mass = one-third the initial mass
Thus, we can conclude that when the acceleration is three times as large, the mass of the new block will be one-third the initial mass.
Learn more about acceleration here: https://brainly.com/question/14344386
#SPJ1
A worker pushes horizontally on a large crate with a force of 245 N, and the crate is moved 3.5 m. How much work was done? answer in : ___J
Answers
The amount of work done by a force can be written as the following:
[tex]W=F.\Delta x[/tex]For our case, we can replace our values and we'll get:
[tex]W=245*3.5=857.5J[/tex]Thus, the amount of work done is 857.5J
You and some friends are duck pin bowling. You’re up and you roll your bowling ball (m = 1.6kg) down the lane. It collided with one pin (0.68kg) on the end in a perfectly elastic one dimensional collision. If the ball was moving at a velocity of 6 m/s just before it hits the pin, what is the velocity of the bowling pin after the collision?
Answers
Given:
The mass of the bowling ball is m1 = 1.6 kg
The mass of the pin is m2 = 0.68 kg
The initial velocity of the ball is
[tex]v_i=\text{ 6 m/s}[/tex]Required: Velocity of the bowling pin after the collision.
Explanation:
According to the conservation of momentum, the velocity after the collision will be
[tex]\begin{gathered} m1v_i+m2\times0\text{ =\lparen m1+m2\rparen v}_f \\ v_f=\frac{m1v_i}{m1+m2} \\ =\frac{1.6\times6}{1.6+0.68} \\ =4.21\text{ m/s} \end{gathered}[/tex]Final Answer: The velocity of the bowling pin after the collision is 4.21 m/s
A baseball of mass 1.23 kg is thrown at a speed of 65.8 mi/h. What is its kinetic energy?
Answers
Given:
The mass of the ball is
[tex]m=1.23\text{ kg}[/tex]The speed of the ball is
[tex]\begin{gathered} v=65.8\text{ mi/h} \\ \end{gathered}[/tex]Required: calculate the kinetic energy of the baseball
Explanation: to calculate the kinetic energy of a body we will use the formula as
[tex]K.E=\frac{1}{2}mv^2[/tex]first, we convert velocity from mi/h into m/s.
we know that
[tex]1\text{ mi=1609.34 m}[/tex]and
[tex]1\text{ h=3600 sec}[/tex]then the velocity is
[tex]\begin{gathered} v=\frac{65.8\times1602.34\text{ m}}{3600\text{ s}} \\ v=29.29\text{ m/s} \end{gathered}[/tex]now plugging all the values in the above formula, we get
[tex]\begin{gathered} K.E=\frac{1}{2}mv^2 \\ K.E=\frac{1}{2}\times1.23\text{ kg}\times(29.29\text{ m/s})^2 \\ K.E=527.61\text{ J} \end{gathered}[/tex]Thus, the kinetic energy of the baseball is
[tex]527.61\text{ J}[/tex]You exert a force of 5.3 N on a book to slide it across a table. If you do 2.5 J of work in the process, how far did the book move?
Answers
We will have the following:
[tex]2.5J=5.3N\cdot x\Rightarrow x=\frac{2.5J}{5.3N}[/tex][tex]\Rightarrow x=\frac{25}{53}m\Rightarrow x\approx0.47m[/tex]So, the book moved 25/53 meters, that is approximately 0.47 meters.
Why isn't geothermal energy used more often?Question 12 options:It's hard to find geothermal energy sources that are close to the surface.It produces too much pollution.It adds a large amount of water into the water cycle through evaporation.It is not a renewable energy source.
Answers
Geothermal energy can be used only if an energy source is present.
Mining is required to use geothermal energy.
The depth of mining increases earthquake risk.
Thus, it is difficult to find geothermal energy sources that are close to the surface.
Marc is sitting at his desk with good posture. What MOST likely is Marc doing?
Answers
It is most likely that Marc is studying while assuming a good sitting posture.
What is posture?Posture is defined as the the various ways an individual carry their body in order to assume a particular position which may be while sitting of standing up.
There different types of postures which are classified under good or bad posture. They include the following:
Healthy Posture.Kyphosis Posture.Flat Back Posture.Swayback Posture.Forward Head Posture.To sit correctly at a dest with a good posture is an example of a healthy posture which was assumed by Marc.
Learn more about posture here:
https://brainly.com/question/28723608
#SPJ1
A 60.0 kg skier with an initial speed of 14 m/s coasts up a 2.50 m high rise
Find her final speed right at the top, in meters per second, given that the coefficient of friction between her skis and the snow is 0.38?
Answers
The final speed (in meters per second), given that the coefficient of friction between her skis and the snow is 0.38 is 14.65 m/s
How do I determine the final velocity?First, we shall obtain the force. This can be obatined as follow:
Mass (m) = 60 KgAcceleration due to gravity (g) = 9.8 m/s²Normal reaction (N) = mg = 60 × 9.8 = 588 NCoefficient of kinetic friction (μK) = 0.38Force (F) = ?F = μKN
F = 0.38 × 588
F = 223.44 N
Next, we shall obtain the acceleration of the skier. This can be obtained as follow:
Mass (m) = 60Force (F) = 223.44 NAcceleration (a) = ?a = F / m
a = 223.44 / 61
a = 3.724 m/s²
Finally, we shall determine the final velocity. This can be obtained as follow:
Initial speed (u) = 14 m/sDistance (s) = 2.5 mDeceleration (a) = 3.724 m/s²Final speed (v) =?v² = u² + 2as
v² = 14² + (2 × 3.724 × 50)
v² = 196 + 18.62
v² = 214.62
Take the square root of both sides
v = √214.62
v = 14.65 m/s
Thus, the the final speed is 14.65 m/s
Learn more about velocity:
https://brainly.com/question/26392384
#SPJ1
The final speed right at the top will be 14.65 m/s and the coefficient of friction between her skis and the snow is 0.38.
What is velocity?The ratio between displacement to time is referred to as the velocity of the object. It is a vector quantity with SI unit meter per second (m/s).
According to the question, the given information is :
Skier's mass, m = 60 kg
The acceleration due to gravity, g = 9.8 m/s²
Initial Speed, u = 14 m/s
Distance, s = 2.5 m
Deceleration is given as, a = 3.724 m/s².
Normal reaction force (N) will be equal to mg.
N = 60 × 9.8
N = 588 N
The coefficient of kinetic friction is given as, μ = 0.38
By using the formula,
F = μKN
F = 0.38 × 588
F = 223.44 N
Now, let's calculate the acceleration of the skier :
f = ma
a = f/m
a = 223.44/60
a = 3.724 m/s².
Now, calculate the velocity,
v² = u² + 2as
v² = 14² + 2 (3.724) (50)
v² = 196 + 18.62
v² = 214.62
v = 14.65 m/s.
Hence, the final speed right at the top will be 14.65 m/s.
To get more information about velocity :
https://brainly.com/question/28738284
#SPJ1
Calculate the kinetic energy of a roller coaster that has a mass of 1,778.6 kg and is traveling with a velocity to 24.5 m/s at the bottom of the first hill.
Answers
Given:
The mass of the roller coaster is m = 1778.6 kg
The velocity of the roller coaster is v = 24.5 m/s
To find the kinetic energy of the roller coaster.
Explanation:
The formula to calculate the kinetic energy is
[tex]K\mathrm{}E\text{. =}\frac{1}{2}mv^2[/tex]Substituting the values, the kinetic energy will be
[tex]\begin{gathered} K\mathrm{}E\text{. =}\frac{1}{2}\times1778.6\times(24.5)^2 \\ =533802.325\text{ J} \end{gathered}[/tex]Final Answer: The kinetic energy of the roller coaster is 533802.325 J.
Which of the following is needed for an electric circuit to work?A. Fusion sourceB. Nuclear sourceC. Chemical sourceD. Energy sourceVoltage is a measure of the ________ it gives to the current.A. AccelerationB. SpeedC. PullD. Push
Answers
We will have the following:
The "part" needed for an electric circuit is an energy source.
Voltage is the measure of the acceleration it gives to the current.
Sodium has a density of 1.95 g/cm3. What is the volume of 56.2 g of sodium?
Answers
Answer: couldn't type in that little 3 haha
Explanation:
