Magnetic property of iron will help in seperating iron from rest of the materials.
Iron is a metal and have magnetic property. Magnetic property is property of metal in which metal has the attraction power to attract other metal. Iron is ferromagnetic but it requires certain temperature and certain conditions. It occurs below 770°C, which is curie temperature.
There are 5 magnetic properties
Property 1: Intensity of magnetisationProperty 2: Magnetic Field (H) or Magnetic intensity. Property 3: Magnetic susceptibilityProperty 4: RetentivityProperty 5: Coercivitytypes of magnetic materials
Diamagnetic Material,Paramagnetic Materials,Ferromagnetic Materials,Antiferromagnetic Materials,Ferrimagnetic Materials.
To know more about magnetic property visit
https://brainly.com/question/4242549
#SPJ4
Draw a carboxylic acid that results from the hydrolysis of glyceryl tributyrate. Include only one carboxylic acid product in your answer
Glyceryl tributyrate will react with 3 mol of water and form a glycerol and 3 mol of carboxylic acid.
What element is this? I am a yellowish gas with seven valence electrons that can kill. I am often used in disinfectants but never makes me with ammonia or you will get some nasty gases that can harm you.
The element that forms a yellowish gas, often used as a disinfectant, and forms a nasty gas with ammonia would be chlorine.
Properties of chlorineChlorine is an element with a valence electron of 7. It forms a greenish-yellow gas that is 2 to 5 times denser than air. The element belongs to a group of elements on the periodic table known as halogen.
Chlorine is used as a disinfectant. It is utilized in the treatment of water for domestic use. It has the ability to kill harmful microbes off surfaces. It is also used in the manufacturing of textile products, paper bleaching, and several other industrial uses.
Chemically, chlorine is highly reactive. It reacts with ammonia to form a toxic gas known as chloramine. The gas affects the throat, lungs, and eyes of humans and in high doses, can cause outright death.
Thus, the element in question that form yellowish gas, is used as a disinfectant, and forms nasty gas with ammonia would be chlorine.
More on chlorine can be found here: https://brainly.com/question/14962130
#SPJ1
Select all the correct answers. what are three reasons why nebulae contribute more to stellar formation than other regions of the universe? they are rich in hydrogen and helium. they have an unlimited supply of hydrogen. they are far away from black holes. they are dense and hot. they have a strong gravitational pull.
Answer:
1 ) They are wealthy in gases hydrogen and helium. 2 ) They are very hot and dense . 3 ) They have a solid gravitational pull.
Explanation:
Space where huge size of gaseous and dust cloud is present is called nebula. It is mainly made of hydrogen and helium. Nebula exist in the space which is between the stars and it is call as interstellar space.
Helix nebula is closest nebula which is near the earth. It’s distance from earth is about 700 light years.
Dark nebulae are very dense as well as cold. Nebula can be divided into dark nebula and bright nebula. The gas which is present between the stars is always combine with solid grains cosmic dust.
Nebulae contribute more to stellar creation than other areas of the universe for the following three reasons:
They are abundant in helium and hydrogen.They are hot and thick.They are highly gravitationally drawn.So, the correct options are A, D and E.
What is Nebulae?Huge clouds of gas and dust known as nebulae are found in space and are made up of heavier elements in the form of dust particles as well as ionized gases like hydrogen and helium.
Because the gases and dust within them have the potential to collapse under the influence of gravity and form new celestial objects, they are frequently the birthplace of stars and planetary systems. They are rich in hydrogen and helium. They have a strong gravitational pull and are hot and dense.
Hence, the correct options are A, D and E.
Learn more about Nebulae, here:
https://brainly.com/question/9497068
#SPJ5
Select all the correct answers. what are three reasons why nebulae contribute more to stellar formation than other regions of the universe?
they are rich in hydrogen and helium. they have an unlimited supply of hydrogen. they are far away from black holes. they are dense and hot. they have a strong gravitational pull.is the process of mixing ethanol and water exothermic or endothermic? how do you know (use numeric data to justify)? does this suggest presence of large clusters or small clusters in the mixture?
The reaction is exothermic as it involves a bond-forming process
when the liquids are mixed temperature of the reaction between the mixture increases.
There are small and large clusters in the mixture
The exothermic reaction involves the formation of new bonds which involves a combination of the bonds to form a new compound in our case water has hydroxy ions that bond with those of ethanol.
Mixing ethanol and water in volumetric glassware reduces the volume and increases the temperature.
The numerical example
Fill two 250 mL graduated cylinders to the line with water and ethanol pure temperature sensor shows both at room temperature. Next, move the temperature probe to an empty 500 mL graduated cylinder and pour the contents of the two smaller cylinders simultaneously and mix well.
The temperature of the mixture will rise by about 8 °C and the volume will decrease to 480 this indicates that the reaction is exothermic as the temperature rises and volume reduces
yes, clusters are present as ethanol falls between the spaces left by water as it has small molecules than that of water.
To learn more about ethanol and water reactions see https://brainly.com/question/1206318?referrer=searchResults:
#SJP4
QUICK QUESTION...
What is the best method to use in extracting orange sugar from a whole orange
What is it you are making exactly? It is going to be for a recipe of some sort, like a beverage or food? If you could sort of expand on what the purpose is for, I think I may be able to help you find the best method for the extraction.
a 1.0857g sample of a compound containing only carbon, hydrogen, and oxygen was burned in excess oxygen gas. 3.190g of co2 and 0.9360g of h2o were produced. find the empirical formula of the compound
The empirical formula of the compound is C3H4O as the mole ratio is 3 : 4 : 1
1) Mass of carbon (C) in 3.190 g of carbon dioxide (CO₂)
atomic mass of C: 12.0107 g/mol
molar mass of CO₂: 44.01 g/mol
Setting up proportion as:
12.0107 g of C / 44.01 g of CO₂ = x / 3.190 g of CO₂
x = 0.87057 g of C
2) Mass of hydrogen (H) in 0.9360 g of water (H₂O)
atomic mass of H: 1.00784 g/mol
molar mass of H₂O: 18.01528 g/mol
Setting up proportion as:
2 × 1.00784 g of H / 18.01528 g of H₂O = x / 0.9360 g of H₂O
x = 0.10472 g of H
3) Mass of oxygen (O) in 1.0857 g of pure sample
Mass of O = mass of pure sample - mass of C - mass of H
Mass of O = 0.38397 g O ≈ 0.3840 g
4) Mole calculations
C: 0.87057 g / 12.0107 g/mol = 0.07248 mol
H: 0.10472 g / 1.00784 g/mol = 0.10390 mol
O: 0.3840 g / 15.999 g/mol = 0.02400 mol
So, to find empirical formula the mole ratios are:
C: 3
H: 4
O: 1
Thus the mole ratio is 3 : 4 : 1, and the empirical formula is: C3 H4 O
Learn more about empirical formula here:
https://brainly.com/question/14044066
#SPJ4
5. What percent of CuCl₂ is Cu?
Answer: The mass percent of copper in copper chloride is 47.23 %.
Which list consists of elements that have the most similar chemical properties?
a) Cu, Zn, Fe
b) K, Ca, Br
c) Mg, Al, Si
d) Cs, Na, K
The list that consists of elements that have the most similar chemical properties is caesium, sodium and potassium (option D).
What is the periodic table?Periodic table is the tabular chart of the chemical elements according to their atomic numbers so that elements with similar properties are in the same group (column).
The periodic table is made up of chemical elements arranged in groups and periods. Chemical elements in the same group possess similar chemical properties.
According to this question, the following elements are in the same group 1:
Caesium is a chemical element (symbol Cs) with an atomic number of 55. It is a soft, gold-colored, highly reactive alkali metal. Sodium is a chemical element (symbol Na) with an atomic number of 11 and atomic weight of 22.98977.Pottasium is an element (symbol K) with an atomic number of 19 and atomic weight of 39.0983.Therefore, Cs, K and Na will have the most similar chemical properties because they belong to the same group.
Learn more about periodic table at: https://brainly.com/question/11155928
#SPJ1
Melting and boiling points of a pure liquid
are........ physical quantities, whereas mass
and volume are........... physical properties.
Melting and boiling points of a pure liquid are intensive physical quantities whereas mass and volume are fundamental physical quantities.
What is melting point?The typical definition of the melting point is the temperature at which a substance transforms from a solid to a liquid.
The temperature at which a liquid under atmospheric pressure changes from a solid to a liquid is known as its melting point. Here, both the liquid and solid phases coexist in equal amounts. The substance's melting point is listed under standard pressure, although it varies with pressure as well.
What is boiling point?The temperature at which a liquid's vapour pressure equals the surrounding atmosphere is known as the boiling point of the liquid. This temperature causes the liquid to become a vapour.
The boiling point of the liquid is influenced by the atmospheric pressure. When a liquid is at high pressure, its boiling point is higher than when it is at atmospheric pressure. Different liquids have variable boiling points at a specific pressure. The standard boiling point of a liquid was established by IUPAC in 1982 as the temperature at which a liquid starts to boil at a pressure of one bar.
Learn more about melting point here :
brainly.com/question/478202
#SPJ13
what is the result of applying too much sample to the tlc plate? select one: the sample leeches out into the elution solvent reduced separation between the spots some of the sample moves down instead of up the spot does not leave the origin the sample moves past the solvent front
Applying too much sample to the TLC (thin layer chromatography) plate results in reduced separation between the spots.
When performing thin layer chromatography it is necessary to not apply too much of the sample onto the plate. Once the elution solvent starts climbing up the plate, all the components of the sample will be separated along the plate according to the intensity of their interactions with the plate and the solvent (quantified as the Rf value - retention factor).
In a sample that is too concentrated or too much of it has been applied, the separation will be negatively affected because the huge spots originating from the sample components will overlap, making Rf determination difficult, if not impossible.
You can learn more about thin layer chromatography here:
brainly.com/question/13483325
#SPJ4
6. Classify the following as physical changes (PC), chemical changes (CC), physical properties (PP), and chemical properties (CP):
a. __An iron scorches a shirt when you leave it in one spot too long.
b. __ The tires on your car seem to be getting low in very cold weather.
c. __ Your grandmother's silver tea set gets black with tarnish over time.
d. __ Spray-on oven cleaner converts grease in the oven into a soapy material.
e. __ An ordinary flashlight battery begins to leak with age and can't be recharged.
f. __ Acids produced by bacteria in plaque cause teeth to decay.
g. __ Sugar chars if overheated while making homemade candy.
h. __ Hydrogen peroxide fizzes when applied to a wound.
i. __ Dry ice "evaporates" without melting as time passes.
The classification of the given processes as either physical changes (PC), chemical changes (CC), physical properties (PP), and chemical properties (CP): is as follows:
CC An iron scorches a shirt when you leave it in one spot too long.PC The tires on your car seem to be getting low in very cold weather.CC Your grandmother's silver tea set gets black with tarnish over time.CP Spray-on oven cleaner converts grease in the oven into a soapy material.CC An ordinary flashlight battery begins to leak with age and can't be recharged.CP Acids produced by bacteria in plaque cause teeth to decay.CC Sugar chars if overheated while making homemade candy.CP Hydrogen peroxide fizzes when applied to a wound.PP Dry ice "evaporates" without melting as time passes.What are physical and chemical changes?Physical changes are changes that occur in a substance that are easily reversible and only affect the physical properties of that substance.
In physical changes, no new substances are formed.
Some physical properties that may change in physical changes are color, taste, volume, mass, physical state, etc.
Chemical changes are changes that occur in a substance that are not easily reversible and which affect the chemical properties of that substance.
In chemical changes, new substances are formed.
Some chemical properties that may change in physical changes are oxidation state, combustibility, etc.
Learn more about chemical and physical changes at: https://brainly.com/question/11370755
#SPJ1
Calculate the % Composition of the following compounds, remember that the decimal has to move 2 places at the end. (NH4)2CO3
The percent composition of (NH₄)₂CO₃ is 99.999 % ≈ 100 %.
To calculate percent composition of the elements in a compound,
the molar mass of element is divided by the molar mass of the compound and then, it is multiplied by 100.
We know that,
Molar mass of (NH₄)₂CO₃ is 96.086 g/mol.
Molar mass of each element of compound is-
Nitrogen = 2 × 14.007 g/mol = 28.014 g/mol
Hydrogen = 8 × 1.008 g/mol = 8.064 g/mol
Carbon = 1 × 12.011 g/mol = 12.011 g/mol
Oxygen = 3 × 15.999 g/mol = 47.997 g/mol
Now,
We will calculate the percent composition -
% composition of nitrogen = 28.014 g/mol × 100 = 29.155%
96.086 g/mol
% composition of hydrogen = 8.064 g/mol × 100 = 8.392%
96.086 g/mol
% composition of carbon = 12.011 g/mol × 100 = 12.500%
96.086 g/mol
% composition of oxygen = 47.997 g/mol × 100 = 49.952 %
96.086 g/mol
We will add the percentage to calculate % composition of (NH₄)₂CO₃ -
29.155 % + 8.392 % + 12.500 % + 49.952 % = 99.999% ≈ 100 %
Therefore, % composition is 99.999 % ≈ 100 %
To learn more about composition,
brainly.com/question/14782870
#SPJ1
If mercury (ii) oxide is heated and decomposes, what would the product of the reaction be? 4hgo → 4 2o2
If mercury (ii) oxide is heated and decomposes, the product of the reaction be 4 Hg.
Mercury is a chemical element with the atomic number 80 and the symbol Hg. Formerly known as hydrargyrum and also known as quicksilver, In order to fragment anything into smaller pieces or to break it into smaller pieces, mercury is used in thermometers, barometers, manometers, sphygmomanometers, float valves, mercury switches, mercury relays, fluorescent lights, and other devices: Methane and carbon dioxide are produced when microbes break down organic waste. staying fresh while decomposes The process of recycling nutrients that an organism (plant or animal) has utilized to develop its body begins with decomposes. It is the process by which the decomposing dead tissues transform into more basic organic forms. For a large number of the species at the base of ecosystems, these serve as a food supply.
Learn more about mercury here :
https://brainly.com/question/4025230
#SPJ4
do eukaryotic Cells have DNA found in the nucleus. True or false
balance this equation
___ H2 + ___ O2 → ___ H2O2
Answer:
1H2+1O2—>H2O2
Explanation:
Use the integer+1
calculate the volume of concentrated nitric acid (16 m) required to react with 0.41 g of cu(s) if you use 1.86 ml (an excess) of hno3, what volume of 5.0m naoh will you need to neutralize the solution after the copper is completely dissolved?
The volume of Concentrated nitric acid (16 m) required to react with 0.41 g of cu(s) if you use 1.86 ml (an excess) of hno3, what volume of 5.0m naoh will need to neutralize completely dissolved is 0.704 ml
4 HNO3(l) + Cu(s) ==> Cu(NO3)2(s and aq) + 2 NO2(g) + 2 H2O(l)
According to net Ionic equation 4 moles of HNO3 reacts with 1 mole of Cu(s)
moles of Cu in 0.36 gm of Cu = 0.36/63.5
moles = molarity*volume(L)
moles of Cu*4 =moles of HNO3
Let volume of HNO3 be x
0.36/63.5*4 = 16*x
x = 1.42 ml
c. Volume of HNO3 added = 1.64 ml
excess of HNO3 = 1.64-1.42
= 0.22 ml
Normality of NaOH and HNO3 is same i.e. equal moles of NaOH and HNO3 neutralises itself
molarity of NaOH = 5 moles/litre
moles of NaOH = Moles Of HNO3
5*x = 16*0.22
x = 0.704 ml
Learn more about Concentrated nitric Acid here :
https://brainly.com/question/27966990
#SPJ4
4. We are driving to Las Vegas. The sign says that it is one hundred forty-five kilometers
to Las Vegas. How many meters is it to Las Vegas?
Answer:
145,000 meters
Explanation:
1 kilometer = 1000 meter
145 kilometer = 145 times 1000 meters
so:
145 × 1000 = 145,000 meters
when given the symbol Cl-37, what is the mass and charge of this symbol?mass is 37 and charge is 37mass is 17 and charge is 37mass is 0 and charge is 0mass is 37 and charge is 17
Given the symbol Cl-37, the element is Cl, but there is no information about its charge. When this is like that, it is implicit it is an atom, that is, it is neutral, its charge is 0.
The number indicates is the mass number, so its mass is 37.
So, mass is 37 and charge is 0.
suppose you performed a titration of a weak acid and you found that the equivalence point occurred at 14.81 ml of added naoh. at what volume would you use the ph to determine the pka of the acid? enter your answer numerically to three significant figures.
The volume at which the pH can be used to determine the pKa of the acid is 7.40 ml if the equivalence point occurred at 14.81 ml of added sodium hydroxide.
The weak acid and the conjugate base will have an equal number of moles at the half-equivalence point as the number of moles of sodium hydroxide will neutralize half of the number of moles of the weak acid which will then produce more conjugate base.
The chemical reaction can be given as;
HA = (H^+) + A^-
Calculation of pKa:
pH = pKa + log[A^-]/[HA]
At half equivalence point, pH = pKa
As, ka = 10^-pka
Therefore, ka = 10^-pH
Volume is given which is 14.81 ml. Therefore, the volume that is used to determine the pKa of the acid can be calculated as follows;
14.81/2 = 7.40 ml
Therefore the volume used to determine the pKa of the acid is calculated to be 7.40 ml
To learn more about equivalence point, click here:
https://brainly.com/question/24584140
#SPJ4
phenylacetic acid (c6h5ch2cooh) builds up in the blood of phenylketonurics. when left untreated, this can lead to intellectual disability, seizures, behavioral problems, and even death. a 0.12 m solution has a ph of 2.62. what is the ka of phenylacetic acid?
The [tex]K_{a}[/tex] of phenylacetic acid is 4.76008×[tex]10^{-5}[/tex], when the pH of the solution is 2.62.
As we know,
pH = -log[[tex]H^{+}[/tex]]
[[tex]H^{+}[/tex]] = [tex]10^{-pH}[/tex]
[[tex]H^{+}[/tex]] = [tex]10^{-2.62}[/tex]
[[tex]H^{+}[/tex]] = 2.39×[tex]10^{-3}[/tex]
Also to find [tex]K_{a}[/tex] of phenylacetic acid we know another relation as:
[[tex]H^{+}[/tex]] = [tex]\sqrt{K_{a} .c}[/tex]
2.39×[tex]10^{-3}[/tex] = [tex]\sqrt{K_{a} .0.12}[/tex]
[tex]K_{a}[/tex] = 4.76008×[tex]10^{-5}[/tex]
Therefore, the [tex]K_{a}[/tex] of phenylacetic acid is 4.76008×[tex]10^{-5}[/tex], when the pH of the solution is 2.62.
Learn more about phenylacetic acid here:
https://brainly.com/question/15908906
#SPJ4
suppose you are titrating an acid of unknown concentration with a standardized base. at the beginning of the titration, you read the base titrant volume as 2.75 ml. after running the titration and reaching the endpoint, you read the base titrant volume as 26.18 ml. what volume, in ml, of base was required for the titration?
The volume of the standardized base used in the titration was 23.43 mL.
When performing titration, the volume of the standardized base titrant used in the burette is read first (this value doesn't have to be 0, as it depends on the titrator filling the burette). In this case, this value is 2.75 mL.
During the titration, the titrant level in the burette goes down, and when the endpoint is reached, this level can be read. In this experiment, the final volume is 26.18 mL.
The volume used in the titration is obtained by subtracting the starting value from the final volume:
26.18 mL - 2.75 mL = 23.43 mL
You can learn more about titrations here:
brainly.com/question/2728613
#SPJ4
When a hydrogen atom is covalently bonded to either oxygen, , or fluorine there will be an attraction between that hydrogen and a lone pair of on a nitrogen, oxygen, or fluorine atom on an adjacent molecule. This attraction is called a bond.
Answer:
The attraction is a hydrogen bonding.
Explanation:
Based on the information on intermolecular forces, when a Hydrogen is specifically bonded with a Nitrogen, Oxygen or Fluorine, their bonding is called a hydrogen bond.
the volume vv of an ideal gas varies directly with the temperature tt and inversely with the pressure pp . a cylinder contains oxygen at a temperature of 310310 degrees k and a pressure of 1818 atmospheres in a volume of 120120 liters. find the pressure if the volume is decreased to 9595 liters and the temperature is increased to 320320 degrees k.
The final pressure of the ideal gas is 23.47 atm.
We need to know about the ideal gas theory to solve this problem. The ideal gas is assumed that there is no interaction between particles in a gas. It can be determined by the equation
P . V = n . R . T
where P is pressure, V is volume, n is the number of moles gas, R is the ideal gas constant (8.31 J/mol.K) and T is temperature.
From the question above, we know that
V1 = 120 L
P1 = 18 atm
T1 = 310 K
V2 = 95 L
T2 = 320 K
When the initial and final gas is the same, we can use the ratio of the ideal gas as
(P2 . V2) / (P1 . V1) = T2 / T1
(P2 . 95) / (18 . 120) = 320 / 310
P2 = 23.47 atm
Find more on ideal gas at: https://brainly.com/question/25290815
#SPJ4
Draw the electron configuration for a neutral atom of chlorine.
The electron configuration for a neutral atom of chlorine is 1s² 2s² 2p⁶ 3s² 3p⁵.
Atomic number of Chlorine is 17. to write the electronic configuration of chlorine we need to know the number of electrons in chlorine atom. the atomic number of chlorine is 17 therefore there are 17 electrons. the first two electron enter in 1s since s can hold only 2 electrons then next two electron will enter in 2s . the next six electrons will enter in 2p since p can hold six electrons . and next two electron in 3s now reaming 5 will enter in 3p. therefore the electron configuration for a neutral atom of chlorine is 1s² 2s² 2p⁶ 3s² 3p⁵.
Thus, the electron configuration for a neutral atom of chlorine is 1s² 2s² 2p⁶ 3s² 3p⁵
To learn more about electronic configuration here
https://brainly.com/question/14283892
#SPJ1
after completing the experiment, a student extracts a sample of calcium carbonate with a mass of 0.818 grams from an antacid tablet that claims to have 1000 mg of calcium carbonate. what is the percent error in this student's experiment? round your answer to two decimal places. correct! 18.2
After calculating the percent error and rounding it to two decimal places, the result obtained is 18.20%.
To calculate the percent error we need to calculate the absolute error first. This is done by subtracting the actual value (1000 mg) from the measured value (0.818 g = 818 mg):
818 mg - 1000 mg = -182 mg
We then divide the absolute value of that difference (182 mg) by the actual value (1000 mg).
182 mg / 1000 mg = 0.182
This result is then multiplied by 100 percent and rounded to two decimal places:
0.182 * 100% = 18.20%
You can learn more about percent error here:
brainly.com/question/3670306
#SPJ4
Click here to view a list of the common polyatomic ions. what is the formula for ammonium sulfate? nh4so4 na2so3 (nh4)2so4 na2so4
Option C ;(NH4)2SO4 is the formula for ammonium sulfate.
It is an inorganic salt. It appears as fine white crystals. Its molecular weight is 132.14g/mol. Its density is 1.77g/cm³.It has many commercial uses. It is mainly used as fertilizer for alkaline soils because ammonium ions forms small amounts of acid which lowers the pH of the soil.
It is acidic with pH of 5.5. Its melting point is 235 °C. it is soluble in water. It is obtained by the reaction of sulfuric acid with ammonia. Sulfuric acid will react with two equivalents of ammonia.
To know more about ammonium sulfate click here
brainly.com/question/2671989
#SPJ4
Answer:
C. (NH4)2SO4
And the second question is
A. KOH
Explanation:
How many Moles of H are in 5 moles of C2H4O?
How many atoms of H are in 5 moles of C2H4O?
Please help
1. The number of moles of H in 5 moles of C₂H₄O is 20 moles
2. The number of atoms of H in 5 moles of C₂H₄O is 1.20×10²⁵ atoms
1. How to determine the number of mole
The number of moles of H in 5 moles of C₂H₄O can be obtained as follow:
1 mole of C₂H₄O contains 4 moles of H
Therefore,
5 moles of C₂H₄O will contain = 5 × 4 = 20 moles of H
Thus, the number of moles of H is 20 moles
2. How to determine the number of atoms
We know from the calculation made above that 20 moles of H is present in 5 moles of C₂H₄O. Thus, we can obtain the number of atoms as follow:
From Avogadro's hypothesis,
1 mole of H = 6.02×10²³ atoms
Therefore,
20 moles of H = (20 moles × 6.02×10²³ atoms) / 1 mole
20 moles of H = 1.20×10²⁵ atoms
Thus, the number of atoms of H present is 1.20×10²⁵ atoms
Learn more about number of atoms:
https://brainly.com/question/20712650
#SPJ1
Write a nuclear equation for the beta decay of the following isotopes: Lead-210
In this question, we need to determine what will be the nuclear equation for the Beta decay of Lead - 210.
Beta decay is a type of radioactive decay in which we will have either a neutron becoming a proton, this will be called Beta-minus decay or a proton becoming a neutron, this will be called a Beta-plus decay
In the case of Pb-210, we will have a Beta-minus decay, and one neutron will become a proton:
210/82 Pb ---> 210/83 Bi + electron
Lead - 210 will become Bismuth - 210
PLEASE SOMEONE HELP EXPLAIN THIS IT’S DUE FIRST THING TMRW MORNING!!
Determine the empirical formula of a 28.00 gram sample containing 22.90 grams carbon and 5.10 grams hydrogen.
Answer:
CH3
Explanation:
Hope this helps :)
It is easier to separate liquids that have boiling points within a range of 5 degrees than it is liquids that have boiling points within a range of 10 degrees true or false?.
The given statement exists as false. The temperature at which a liquid's vapor pressure equals the pressure of the gas above it exists comprehended as the boiling point of the liquid.
What is meant by boiling point?The temperature at which a liquid's vapor pressure equals the pressure around it and the liquid transforms into a vapor is known as the boiling point of a substance. A liquid's boiling point varies depending on the atmospheric pressure in the area.
The temperature at which a liquid's vapor pressure equals the pressure of the gas above it exists comprehended as the boiling point of the liquid. The temperature at which a liquid's vapor pressure equals one atmosphere is considered the liquid's typical boiling point (760 torr).
The element with the lowest temperature at which an element would smolder is helium, and the element with the highest temperature is tungsten. The melting point is measured in degrees Celsius (C).
To learn more about boiling point refer to:
https://brainly.com/question/40140
#SPJ4