Answer:
When the results of a new experiment to test atomic theory do not agree with the theory, scientist will repeat the experiment to make sure that his results are reliable.
Explanation:
In the scientific context, each new experiment must be performed with precision and following the steps of the scientific method.
An experiment that does not provide reliable data to demonstrate a theory must be reviewed in detail and performed again to confirm the data obtained in the first attempt.
A theory is a postulate that tries to explain a natural phenomenon, but whose argument can be discussed or does not have the acceptance of a law. When the theory is proven and there are no arguments against it, it can be universally accepted and becomes a law.
The other options are not valid due to:
Scientists worldwide will reject atomic theory because of the new results. A theory cannot be discarded without solid arguments or evidence in order to dismiss it and establish a new one.The scientist will change his results to agree with the accepted theory. This would be an unethical procedure and unacceptable to the scientific community.Other scientists will reject the results because they do not agree with the theory. The opinion of other scientists is not enough to dismiss a theory, if it has a valid scientific basis.From the options provided for each element below, choose the properties that it may have based on its location in the periodic table. Magnesium (Mg): less reactive than sodium dull a gas Fluorine (F): highly reactive nonmetal shiny a conductor
Answer:less reactive than sodium
Explanation:
Answer:
Fluorine (F):
highly reactive nonmetal
Explanation:
are sand and water a heterogeneous or homogeneous
Answer:
Salt is soluble in water, which would give a homogeneous mixture. But, when you add sand, which is insoluble, you will have a mixture of two different phases, a solid and a liquid, therefore this is a heterogenous mixture.
Explanation:
Answer:
Sand and water heterogenous mixtures
Explanation:
Source Socratic Chmistry mixtures
What is the median of the following set: 2, 4, 6, 8, and 10?
Answer:9
Explanation:
(3+8+10+15)/4 = 36/4 = 9
Name the phase change:
Solid to liquid:
Liquid to gas:
Solid to gas:
Liquid to Solid:
Gas to liquid:
Gas to solid:
Answer:
solid to liquid = melting
liquid to gas = evaporation
solid to gas = sublimation
liquid to solid = freezing
gas to liquid = condensation
gas to solid = deposition
Explanation:
Answer: 1) melting
2) Evaporating
3) sublimation
4) Freezing
5) condensation
6) Deposition
Explanation:
. Name three types of energy that exist in a large piece of charcoal on a grill in the sunlight. Explain why the charcoal has each type of energy. (3 points)
Answer:
Chemical Energy, Heat Energy, Radiant(Solar) Energy
Explanation:
First of all, in the large piece of charcoal, there is Chemical energy is stored in it's hydrocarbon molecules. Now, when the charcoal is placed under the grill, it is combusted and then the chemical energy is transformed into heat energy.
Also since it's exposed under sunlight, the charcoal will experience the effect of radiant(solar) energy.
Clear s
Name the element: 1s2 252 2p1
Answer:
The name of this element is boron if you meant to say 1s2 2s2 2p1 instead of 1s2 252 2p1 Because there is no Electron Configuration for 1s2 252 2p1.
Explanation:
Hope this helped you!
What is the definition of a Lewis acid?
a substance that accepts electrons to form a covalent bond
a substance that donates electrons to form a covalent bond
a substance that accepts a proton
a substance that donates a proton
Lewis acid is:
A. a substance that accepts electrons to form a covalent bond
What is a Lewis acid?A Lewis acid is accordingly any substance, for example, the H+ particle, that can acknowledge a couple of nonbonding electrons. At the end of the day, a Lewis acid is an electron-pair acceptor.
Thus, option A is correct.
Find more information about Lewis acid here:
brainly.com/question/15220646
Answer:
A: a substance that accepts electrons to form a covalent bond.
Explanation:
Animal cells contain one large, central vacuole while plant cells have
many smaller vacuoles throughout the cell.
True or false?
According to the following reaction, how many moles of iron(III) chloride will be formed upon the complete reaction of 26.2 grams of iron with excess chlorine gas ?
iron(s) + chlorine(g) iron(III) chloride(s)
Answer:
0.469 mol FeCl₃
Explanation:
Your reaction as a chemical equation is:
2 Fe (s) + 3 Cl₂ (g) ⇒ 2 FeCl₃ (s)
You have 26.2 grams of iron. Convert to moles of iron.
(26.2 g)/(55.845 g/mol) = 0.4692 mol
Use the mole ratio from the chemical equation to convert moles of iron to moles of iron(III) chloride.
(0.4692 mol Fe) × (2 mol FeCl₃/2 mol Fe) = 0.469 mol FeCl₃
You will have 0.469 moles of iron(III) chloride at the end of the reaction.
0.469 moles of iron(III) chloride upon the complete reaction of 26.2 grams of iron with excess chlorine gas
What do you mean by Moles?Its a typical scientific unit used to measure vast numbers of extremely small objects, such as atoms, molecules, or other specific particles.
Iron content in you is 26.2 gram. Transform into moles of iron.
(0.4692 mole) = (26.2 g)/(55.845 g/mole)
Converting moles of iron to moles of iron(III) chloride requires using the mole ratio from the chemical equation.
(2 mole FeCl3/2 mole Fe) (0.4692 mole Fe) = 0.469 mole FeCl3
.
After the process, you will possess 0.469 moles of iron(III) chloride.
To learn more about Moles, refer to the below link:
https://brainly.com/question/15209553
# SPJ2
Which of the following is the correct measurement for the volume of liquid shown below?
A 50.1 mL
B 51 mL
C 50.2 mL
D 52.0 mL
1. The standard molar volume of a gas is 22.4L true or false
Hello! My name is Chris and I’ll be helping you with this problem.
Date: 9/28/20 Time: 9:45 am CST
Answer:
True
Explanation:
The standard occupies a volume of 22.4L
I hope this helped answer your question! Have a great rest of your day!
Furthermore,
Chris
L is the midpoint of VC
LV = 9 find VC
Answer:
VC = 18
Explanation:
Since L is the midpoint and you have LV, you know that LC is also 9.
1. Write the electron configuration for Al (aluminum). Then, write the noble gas configuration. Finally, draw
the orbital diagram. (Non-anonymous question ) (50 Points)
Answer:
[Ne] 3s² 3p¹
1s2 2s2 2p6 3s2 3p1
Explanation:
A chemistry graduate student combines 4.0 grams of potassium and 13.0 grams
of iodine to form potassium iodide. According to the law of conservation of mass,
how much potassium iodide should be formed if the reaction proceeds to
completion?
Answer:
when the reaction is complete 17 g product must be obtain.
Explanation:
Law of conservation of mass:
According to the law of conservation mass, mass can neither be created nor destroyed in a chemical equation.
Explanation:
This law was given by french chemist Antoine Lavoisier in 1789. According to this law mass of reactant and mass of product must be equal, because masses are not created or destroyed in a chemical reaction.
For example:
In given reaction,
2K + I₂ → 2KI
4 g + 13.0 g = 17 g
17 g = 17 g
So when the reaction is complete 17 g product must be obtain because the amount of reactants were 17 g and according to law of conservation of mass ,mass can neither be created nor destroyed in a chemical equation but only convert from one to another form.
Another example:
In photosynthesis reaction:
6CO₂ + 6H₂O + energy → C₆H₁₂O₆ + 6O₂
there are six carbon atoms, eighteen oxygen atoms and twelve hydrogen atoms on the both side of equation so this reaction also followed the law of conservation of mass.
1 lb = 16 oz conversion factors
Answer:
In the North, ______ were used to keep black and white people apart.
ASocial customs incorrect answer
BState laws incorrect answer
CFederal laws incorrect answer
DCourt orders:
Does nitrogen have a higher ionization energy than potassium?
Please HELPPPPP ME ASAP!
Answer:
0.1 M
Explanation:
Please see the attached picture for full solution.
Is Salt and pepper an example of a homogenous mixture?
Answer:
no it is a heterogeneous mixture because salt and pepper are not mixed uniformly.
How many atoms does Zirconium have ?
Answer:
Name Zirconium
Atomic Number 40
Atomic Mass 91.224 atomic mass units
Number of Protons 40
Number of Neutrons 51
Explanation:
PLEASE HELP ME ASAP!!
The amount of oxygen in the reactants is 4 atoms. In the products, the oxygen is distributed to water (H20) and O2 gas. Which coefficients would be placed in front of water and oxygen?
2 in front of water and 2 in front of oxygen O
1 in front of water and 2 in front of oxygen O
1 in front of water and 1 in front of oxygen O
2 in front of water and 1 in front of oxygen
Answer:
D. 2 in front of water and 1 in front of oxygen
Explanation:
This would even out the equation.
A student is studying calcium, a highly reactive element that humans need for strong bones. Which characteristic of calcium is most closely related to its chemical reactivity?
The 20 protons in each atom of calcium
The density of calcium, which is 1.54 g/cm3
The atomic mass of calcium, which is 40.078 amu
The 2 valence electrons in each atom of calcium
Answer:D
Explanation:
Took the quiz
The 2 valence electrons in each atom of calcium this is a characteristic of calcium are most closely related to its chemical reactivity. Hence, option D is correct.
What is calcium?Calcium is a chemical element with the symbol of (Ca).an atomic number of calcium is 20.it is an alkaline earth metal. The atomic mass of calcium is 40.078 unit.
When metal atoms are reacts by losing they're losing their valence electrons. So, the reactivity of a metal depends on how easily its atoms lose valence electrons.
Calcium is a major mineral in our bones.
If you don’t get the right amount of calcium, you lose more bone strength.
The chemical reactivity of an element is dependent on its valence electrons and the distance of its valence electrons from the atomic nucleus.
The 2 valence electrons in each atom of calcium this is a characteristic of calcium is most closely related to its chemical reactivity. Hence, option D is correct.
Learn more about calcium, here:
https://brainly.com/question/9584549
#SPJ6
how objects with different masses and volumes have the same density?
Answer:
mass and volume are independent. Two objects with the same volume can have different masses hence they can have different densities
Explanation:
The mass of atoms their size and how they are arranged determine the density
Which mineral is commonly found in igneous rocks?
halite
feldspar
gypsum
talc
Answer:
Feldspars
Explanation:
Hope this helps! :) x
Which formula represents a convalent compound
H2O2, CaO, MgS, NaCl
The answer is H2O2 hope u have a good day
Answer:
H2O2
Explanation:
i took the test
(02.07 MC
As you move down group one of the periodic table, what happens to the atomic radil? (4 points)
Answer:
It increases
Explanation:
The atomic radii increases because you are adding more shells/electrons
+
Convert 0.406 km into cm
Answer:
The answer is 40600 because of the formula
Answer: 40600
Explanation: You just have to times 100,000 and 0.406
It would look like this...
0.406 * 100,000
or
0.406 x 100,000
---------------------------------------------------
The formula is "multiplying the length value by 100000"
Hope this helps!
arsenic does not have any valence electrons in the 3D orbital because
Answer:
3d orbital is completely filled.
Explanation:
Waste removal is carried out in the:
chromosomes
chloroplasts
cytoplasm
nucleus
A recipe for chocolate cake calls for 236.6 mL of buttermilk.
But your measuring spoons only measure in cmº. How many
cm3 of buttermilk do you need so that the recipe is followed?
cm3
Answer:236.6
Explanation:
When a force sets an object in motion, the moving object has kinetic energy.
True or false
Answer:
I think it's true but I'm not to positive on it <3
Explanation:
Answer: True
Remember, Kinetic Energy is anything that moves and not that stops. Let’s make something up, Steve is playing Jacks.When Steve bounces the ball it has kinetic energy when he releases it from his hand, when the ball hits the ground it’s called Potential Energy because it stops.