The term "drag force" refers to the resistive force that arises when a body moves through air or a fluid. The drag coefficient and drag force are intimately correlated.
Comparing drag force and air resistance?One example of the drag force, which is the force that objects experience when moving through a fluid, is air resistance (liquid or gas). Drag force, like kinetic friction, only manifests when an item is moving and is pointing in the opposite direction.
Is gravity a drag force?But as the person's speed rises, the drag force also does, until it reaches the point where it equals the gravitational force and produces a net force of zero.
To know more about drag force visit :-
https://brainly.com/question/13267336
#SPJ4
Match each term to the correct description. 1. Business continuity with a drive failure
2. A copy of the data stored in another location
3. Business continuity while restoring the copy 4. More than one disk 5. Simple copy
a. Rebuild
b. Array c. Backup
d. Degraded e. Mirror
Bill possesses the entrepreneurial traits of passion, drive, planned experimentation, and decisiveness.
Restrictive qualities: Refusal to delegate, placing blame on people and outside factors, and a lack of business education. What traits characterize entrepreneurs? A successful entrepreneur possesses a variety of traits that support both their individual success and the success of their company. A successful entrepreneur should treat business operations seriously and thoroughly consider important decisions. Invest more time and effort in your business, and be deliberate in your choices. If I were Hugo, I would have sold my company, renegotiated the terms, and agreed to a higher return that satisfies my requirement for monthly expenses. Bill possesses the entrepreneurial traits of passion, drive, planned experimentation, and decisiveness.
Learn more about Entrepreneurs here:
https://brainly.com/question/24729021
#SPJ4
A reinforced concrete column 600 mm diameter has 6 steel rods of 25 mm embedded in it and carries a load of 800 kN. Find the stresses in steel and concrete. Take E = 200GPa for steel and for concrete, E = 25 GPa. Also find the extension of column due to the load.
The stresses in steel and concrete are 1,631.29 MPa and 0.2535 MPa respectively.
The extension of column due to the load is 0.0017mm
How do we find the values of stresses?To find the stresses in the steel and concrete, we need to use the principle of stress-strain proportionality. The formula for stress is:
Stress (σ) = Load (P) / Area (A)
The area of the steel rods is:
A = (π/4) * (25 mm)^2 = 490.87 mm^2
The area of the concrete is:
A = (π/4) * (600 mm)^2 = 314,159 mm^2
The stress in the steel is:
σ_steel = P / A = 800 kN / 490.87 mm^2 = 1,631.29 MPa
The stress in the concrete is:
σ_concrete = P / A = 800 kN / 314,159 mm^2 = 0.2535 MPa
To find the extension of the column, we need to use the formula for strain:
Strain (ε) = Extension (ΔL) / Original length (L)
We can use the principle of linear elasticity to find the extension of the column due to the load, which states that:
Stress = Young's modulus * Strain
We can use the formula of stress and strain to find the extension of the column:
ΔL = (PL)/(AE)
L = 600mm, P = 800kN and A =314,159 mm^2
ΔL = (80010^310^-360010^-3)/(314,1592510^9) = 0.0017 mm
So the extension of column due to the load is 0.0017mm
learn more about stress in steel: https://brainly.com/question/13100929
#SPJ1
MySQL is an example of the _____.
a. hierarchical model
b. XML data model
c. file system data model
d. relational data model
Option (D) is correct ,MySQL is an example of the relational data model.
What is data?Data are pieces of information that have been gathered, arranged, and analysed to give them context and significance. It is utilised in many different disciplines, including business, science, technology, and policy-making, to obtain insight and guide decisions. Data can be expressed in a variety of ways, including as numbers, text, images, audio, and video. There are many different ways to gather data, including surveys, interviews, inspections, and research. To reach conclusions and form predictions, it is then arranged and subjected to analysis. Data can be utilised to create new products, boost productivity, enhance customer support, and guide choices. In order to gain new perspectives and opportunities, data can also be utilized to spot trends and patterns.
To learn more about data visit :
brainly.com/question/27267260
#SPJ4
The content of the variable result after the following is _____________. Enter the result without any spaces
int sum = 0;
for(int i = 1; i <= 10; i++)
{
sum = sum + i;
}
The content of the variable result after the following is 55. The for loop will iterate 10 times and add the value of i to the sum each time until it reaches 10, at which point the sum will be 55.
What is variable?A variable is a named storage location in a computer program’s memory that holds a value. This value can change over time as the program runs. Variables are used to store data in programs, such as numbers, text, or other types of information. Variables are declared with a type, such as an integer, double, or string, to indicate the type of data that can be stored in the variable. Variables can be given a name so that it can be used to refer to the data stored in it.
To learn more about variable
https://brainly.com/question/15877320
#SPJ4
The Antoine Equation gives the saturated vapour pressure (P) as a function of temperature (T): log_10 [P] = A - [B/(T + C)] where P is in mmHg and T is in degree C a. Determine the normal boiling point of benzene and the normal boiling point of toluene. The Antoine constants for benzene and toluene are as follows: Benzene: A = 6.91, B = 1211, C = 221 Toluene: A = 6.95. B = 1344. C = 219 b. Assuming ideal behaviour, construct a T-xy diagram for the benzene toluene system at 760 mmHg based on benzene. (NB The temperature extremes of the diagram are the boiling points of the two components.) c. A mixture containing 40 mol% benzene and 60 mol% toluene is fed to a flash tank operating at 760 mmHg. If two thirds (by moles) of the feed is vaporised, what is the operating temperature of the tank and the composition of the two phases formed? Graph paper is provided. Normal pressure is 760 mmHg.
a. The normal boiling point of benzene is 80.3°C and the normal boiling point of toluene is 110.6°C.
b. The T-xy diagram for the benzene toluene system at 760 mmHg.
c. The operating temperature of the tank should be 101.1°C.
What is tank?
A tank is an armoured, tracked, self-propelled combat vehicle designed to defeat opposing forces on the battlefield by using powerful weapons, mobility and protection. Tanks are heavily armoured and usually carry a large calibre main gun along with various machine guns, smoke launchers and other weapons. Tanks are the most heavily armed and protected vehicles on the battlefield, providing a high degree of protection against both direct and indirect fire. Tanks are capable of moving quickly across rough terrain, and are able to support infantry forces by providing fire support. Tanks are designed to be a mobile, powerful and versatile force on the battlefield, and are often used for breaking through enemy lines, seizing key positions and flanking enemies.
To learn more about tank
https://brainly.com/question/14598599
#SPJ4
how did new farming methods in the 1920s impact the great plains?
They altered landscapes and made the land more vulnerable to drought.
What occurred to farmers in the 1920s and how did that presage what transpired during the Great Depression?What occurred to farmers in the 1920s and how did that presage what transpired during the Great Depression?Due to their surplus production, the farmers began to go bankrupt as a result of their inability to sell their harvests.This demonstrated that the economy was about to collapse. Credit was easily accessible and affordable.
How did monetary policy at the federal level impact economic growth inside the 1920s?They increased credit, which made it simpler to get mortgages and grow businesses.
To know more about great plains visit:
https://brainly.com/question/20530869
#SPJ4
A current of 2 A flows for 10 h through a 100 Ω resistor. The energy consumed by the resistor is:
Answer:
4 kWh
Explanation:
When a current I flows through a resistor R, the power dissipated across the resistor is
P = I2R
For time t, the energy consumed by the resistor is,
E = Pt = I2Rt
Calculation:
Given that, current (I) = 2 A
Resistor (R) = 100 ohm
Time (t) = 10 hours
Energy consumed (E) = 22 × 100 × 10 = 4 kWh
Given a positive integer (call it ), a position in that integer (call it P), and a transition integer (call it D). Transform N as follows: • If the ph digit of N from the right is from 0 to 4, add D to it. Replace the P digit by the units digit of the sum. Then, replace all digits to the right of the pa digit by 0. If the ph digit of N from the right is from 5 to 9, subtract D from it. Replace the pa digit by the leftmost digit of the absolute value of the difference. Then, replace all digits to the right of the pa digit by 0. Example 1: N-7145032, P = 2, D = 8. The 2nd digit from the right is 3; add 8 to it (3+8=11), and replace the 3 with 1 to get 7145012. Replace the digits to the right by Os to get 7145010. Example 2: N = 1540670, P = 3, D = 54. The 3 digit from the right is 6; the absolute value of 6-54 is 48; replace with the 4 to get 1540470. Replace the digits to the right with Os to get 1540400 INPUT: There will be 5 sets of data. Each set contains 3 positive integers: N. P. and D. N will be less than 10"; P and D will be valid inputs. No input will cause an output to have a leading digit of o. OUTPUT: Print the transformed number. The printed number may not have any spaces between the digits. SAMPLE INPUT: (http://www.datafiles.acsl.org/2020/contestl/jr-sample-input.txt) 124987 2 3 540670 39 7145042 2 8 124987 2 523 4386709 1 2 SAMPLE OUTPUT: 1. 124950 2. 540300 3. 7145020 4. 124950 5. 4386707 TEST DATA TEST INPUT: 4318762 4 3 72431685 1 7 123456789 78 9876543210 10 25 314159265358 8 428 TEST OUTPUT: 1. 4315000 2. 72431682 3. 121000000 4. 1000000000 5. 314140000000
When the program prompt , you can copy paste the following lines as input 124987 2, 3 540670 3 9, 7145042 2 8, 124987 2 52,3 and 4386709 1 2
importing the Java utility scanner;
public class TransformNumbers {
public static void main(String[] args) {
int numSets = 5; //no of input sets
int P, D;
String N;
int digit;
int sum, diff, unitDigit;
char leftMost;
System.out.println("Please enter 5 sets of N P D values on separate lines");
Scanner input = new Scanner(System.in);
for(int i = 1; i <= numSets; i++)
{
N = input.next();
P = input.nextInt();
D = input.nextInt();
digit = N.charAt(N.length() - P ) - '0'; //convert from char to int
if(digit >= 0 && digit<= 4)
{
sum = digit + D;
unitDigit = sum % 10;
N = N.substring(0, N.length() - P) + unitDigit;
}
else if(digit >= 5 && digit <= 9)
{
diff = digit - D;
if(diff < 0)
diff = -diff;
leftMost = (""+diff).charAt(0);
N = N.substring(0, N.length() - P) + leftMost;
}
//set remaining on right to 0
for(int j = 1; j < P; j++)
N = N + "0";
System.out.printf("%d. %s\n",i, N);
}
}
}
To learn more about integers
https://brainly.com/question/17283992
#SPJ4
Which of the following types of auditing requires access to source code?
Question options:
1. Use Case Testing
2. Code Review
In order for a subject to be _____, the system must first ____ the subject and then record the subject's actions.
Question options:
1. accountable, identify
2. accountable, authorize
A company needs to conduct testing of technical controls as part of an IT Security Audit. Which of the following types of testing allows the auditor to have full knowledge of the internals for the system(s) under test at the time the tests are being designed or selected?
Question options:
1. White box testing
2. Gray box testing
White box testing allows the auditor to have full knowledge of the internals for the system(s) under test at the time the tests are being designed or selected.
What is auditor?
An auditor is an independent professional who reviews and assesses the accuracy and completeness of financial statements and other financial documents. Their purpose is to provide an independent opinion on the accuracy and reliability of financial records. Auditors also analyze financial data and internal controls to ensure compliance with applicable laws and regulations. They identify areas of potential risk and make recommendations on how to reduce or eliminate them. Auditors review transactions and activities to ensure they are properly authorized and accurately recorded. They also check for discrepancies and irregularities in financial documents and records.
To learn more about auditor
https://brainly.com/question/29834112
#SPJ4
Complete Question:
Which of the following types of auditing requires access to source code?
Question options:
1. Use Case Testing
2. Code Review
In order for a subject to be _____, the system must first ____ the subject and then record the subject's actions.
Question options:
1. accountable, identify
2. accountable, authorize
A company needs to conduct testing of technical controls as part of an IT Security Audit. Which of the following types of testing allows the auditor to have full knowledge of the internals for the system(s) under test at the time the tests are being designed or selected?
Question options:
1. White box testing
2. Gray box testing
3. Black box testing
For sensitive data transmission, the investigator should include a _____ in the consent process stating that every attempt will be made to protect information but cannot be guaranteed. a) separate
b) disclosure c) contract d) signature request
The investigator should include a signature request in the consent process stating that every attempt will be made to protect information but cannot be guaranteed.
What is the investigator?
An investigator is a person who is responsible for conducting investigations into a wide range of matters in order to uncover facts or evidence. Investigators may be employed by private companies, law enforcement agencies, or other organizations in order to uncover the truth behind a given circumstance. Investigators typically use a variety of methods to conduct their investigations, including interviews, surveillance, research, and analysis of documents. The goal of an investigator is to gather as much information as possible in order to determine the truth of a situation. Investigators must have strong communication and problem-solving skills in order to be successful in their role. They must also be able to remain objective and impartial in order to uncover the facts of a case.
To learn more about investigator
https://brainly.com/question/24076028
#SPJ4
Engineers should follow their professional code of ethics because. It helps them avoid legal problems, such as getting sued It provides a clear definition of what the public has a right to expect from responsible engineers It raises the image of the profession and hence gets engineers more pay The public will trust engineers more once they know engineers have a code of ethics Solution: Choice A: Avoiding legal problems is generally a good thing, but it's not the most relevant reason why the code should be followed (and in some cases, strictly following the code might make it more likely that you'd get sued, e.g., by a disgruntled contractor if you refuse to certify shoddy workmanship). Choice C: Raising the image of the profession is a good thing, but not for the reason of getting more pay; that would be to act from self-interest rather than ethical motivations. Choice D: Increased public trust is generally a good thing, but the mere knowledge that there is such a code means little unless engineers actually follow it, and for the right reasons. Choice B: The best and most relevant answer. The code of ethics is designed to promote the public welfare, and hence the public has a right to expect that responsible engineers will follow each of its provisions, as clearly defined by the code.
Answer:
B. It provides a clear definition of what the public has a right to expect from responsible engineers.
Explanation:
Similar to licensed attorneys, doctors, accountants, etc., as licensed engineers, it is our ethical responsibility to provide engineering judgement based in the best interest of the public, i.e., not your employer, partner, colleague, because we serve the public first, and they have a right to expect us to do the right thing as trained, experienced professionals, because it is our duty and a privilege.
A is incorrect because the concept of strictly following professional code of ethics won't really keep you from legal troubles, because you still have judgement calls to make, and those could be end up being a mistake that that will cost a contractor or a client money, regardless of the decisions being ethical or not.
C is incorrect because following ethics won't play a part in raising the image of the profession because you can be an ethical saint, but still be rude and arrogant which will impact your image as an engineer far greater than being ethical. You can also make honest mistakes while following an ethical code of conduct, and it won't matter to the contractor/client who was negatively impacted if you were ethical or not.
D is incorrect because trust is built over time, based on numerous factors. Yes, ethics will play a role in building trust, but ultimately the public will only trust engineers who execute successful projects, time and time again. You can make an honest mistake and still lose their trust. You can blame contractors, vendors, etc. for making mistakes, and most people will see through your intent to maintain your "perfect" image, thereby causing them to lose their trust in you as an engineer.
Which service in AWS helps in improving the security of application deployed on cloud?
An automatic, continuous security best practice check is carried out on your AWS resources by the AWS Security Hub, a cloud security posture monitoring service.
What is AWS Cloud?Amazon Web Services, Inc. (AWS), a subsidiary of Amazon, provides people, companies, and governments with metered, pay-as-you-go on-demand cloud computing platforms and APIs.
This is a common practice among clients in addition to autoscaling (a process that allows a client to use more compute in times of high application usage, and then scale down to reduce costs when there is less traffic).
These cloud computing web services include a variety of services for networking, computing, storage, middleware, IOT, and other processing resources, in addition to software tools, through AWS server farms.
This relieves clients from managing, scaling, and patching hardware and operating systems.
One of the key services that users can access is Amazon Elastic Compute Cloud (EC2).
Hence, An automatic, continuous security best practice check is carried out on your AWS resources by the AWS Security Hub, a cloud security posture monitoring service.
learn more about AWS click here:
brainly.com/question/28145530
#SPJ4
1. Which of the following engineering professional organizations provides a codes of ethic? (a) The American Society of Mechanical Engineers (b) The Institute for Electrical and Electronic Engineers (c) The American Institute of Chemical Engineers (d) All of the above 2. Engineering ethics include ideas and directives related to: (a) Urban infrastructure (b) Contracts (c) Integrity (d) Corporate business practices
An engineering professional group that offers codes of ethics is the Institute for Electrical and Electronic Engineers.
What does engineering ethics mean in terms of business ethics?A set of moral guidelines for engineers that can be used in the majority of work-related situations is known as engineering ethics. Depending on the area of application or the discipline, these criteria could change. These moral requirements are what engineers owe to the general public, employers, and the engineering community.
Why does a professional engineer need a code of ethics?A code of ethics for engineers serves as a benchmark for appropriate conduct, which is a crucial consideration. Since they share your religious convictions, you know you can depend on another PE to act in an honest and morally upright manner.
To know more about codes of ethics visit :-
https://brainly.com/question/14914455
#SPJ1
What type of promotional strategy promotes to the manufacturer?
Question 1 options:
a) Pull strategy
b) AIDA strategy
c) Push strategy
d) Market strategy
Which element of the promotional mix gives the buyer the most power to express their personal views?
Question 2 options:
a) Advertising
b) Social media
c) Public relations
d) Sales promotion
This strategy is designed to encourage manufacturers to stock and sell the product, rather than relying on customers to come to the product. This is done through direct marketing such as:
Trade showsDirect mail campaignsDirect salesThis type of strategy is usually used when there is a very specific target audience that the manufacturer would like to reach, such as a particular industry or geographic region.
2. Leveraging Social Media for Buyer EmpowermentThrough social media, buyers can post comments, reviews, and ratings about the product or service that they purchased, giving them a platform to share their opinions and experiences. This provides the company with valuable feedback that can be used to improve their products and services, as well as providing an opportunity for buyers to express their views to the company and other buyers. Social media also gives buyers the power to influence other buyers by sharing their experiences and opinions, creating a more informed and empowered consumer base.
Learn more about Social media: https://brainly.com/question/3653791
#SPJ4
6.3 Ethical situation Since May, you have been working with a recruiter to obtain a new position in HIM. Your expe- nience includes over ten years in inpatient and outpatient coding, you are an AHIMA-approved two years. Nothing the recruiter has presented to you has been a good fit, but in late September ICD-10 trainer, and you have worked with your state association on coding projects over the past the recruiter calls with positions open for coding auditor. You have never done that type of work Chapter 223 B Competency VI.Z 5 5 lack go s or this before , but are confident you could learn, and the recruiter gets you a phone interview . During the conversation, the HIM manager for the organization says that she sees you have been an auditor since May. You immediately recognize that the HIM manager has the wrong impression of your experience. Tis Determine the appropriate course of action in response to the interviewer's statement. Provide justification based on the AHIMA Code of Ethics. Resource AHIMA. 2019. AHIMA Code of Ethics. http://bok.ahima.org/doc?oid=105098#.XR-TMOK171.
In this ethical situation, the appropriate course of action in response to the interviewer's statement is to be honest and clear.
This means that you should explain that your experience does not include auditing and provide the interviewer with the correct information about your experience and qualifications. This is in line with the AHIMA Code of Ethics, which states that "Members shall provide accurate information regarding their professional qualifications, credentials, and experience". By being honest and clear, you are adhering to the code of ethics and acting responsibly.
Learn more about Ethical situation:
https://brainly.com/question/13015186
#SPJ4
Accounting practices are largely standard among developed countries.
true
false
False. Accounting practices vary from country to country and even within countries.
What is countries?Countries are sovereign states or territories that are recognized by international law and are independent of any other state. They are characterized by their own government, language, culture, laws, and customs. A country is typically defined by its borders, though these can often overlap with other countries or be disputed. Countries are divided into different categories, such as developed, developing, and least developed. Countries have a wide range of economic, social, and political structures, which can affect the way they interact with other countries. Some countries have a strong international presence, while others have more limited influence.
For example, the Generally Accepted Accounting Principles (GAAP) in the United States are different from the International Financial Reporting Standards (IFRS) used in many other countries. Additionally, some countries have their own national accounting standards and practices that differ from international standards.
To learn more about countries
https://brainly.com/question/28749965
#SPJ4
Which provides the best explanation of why Douglass used parallelism in part A?
Douglass used parallelism mainly to emphasize the points of his speech and to make it more memorable as well.
Parallelism is a rhetorical tactic that employs sentence segments that are grammatically similar or identical, employed in the same context, and read in the same meter. Its objective is to add symmetry to the composition and make it more memorable. It is also used to draw readers in and guide them to the main point.
Douglass employs parallelism throughout his discourse. As an example:
"I will, in the name of humanity, which is outraged, in the name of liberty, which is fettered, in the name of the Constitution and the Bible, which are disregarded and trampled upon, dare..."
"When the dogs in your streets, when the fowls of the air, when the cattle on your hills, when the fish of the sea, and the reptiles that crawl, shall be..."
It contributes to the accumulation of facts that supports his principal thesis or concept.
Learn more about Douglass using parallelism here: https://brainly.com/question/10517884
#SPJ4
Windows picture password belongs to which of the following?
Select one:
a. Behavioral biometrics
b. Physiological biometrics
c. Psychological biometrics
d. Emotional biometrics
e. Cognitive biometrics
The Conficker Worm is classified by Mandiant/FireEye as what of a threat against ICS networks?
Select one:
a. Cyber Crime
b. Destructive
c. Nuisance
d. Hacktivism
e. Data Theft
Which of the following are considered to be interception attacks? (Choose all that apply.)
Select one or more:
a. whaling attacks
b. amplification attack
c. replay attacks
d. denial of service
e. man-in-the-middle
Hold down the F8 key to activate Advanced Boot Options and receive password-free access to the Administrator account when Windows 7 restarts.
An administrator is someone who has the power to change a computer in a way that affects other users. Administrators have access to all data on the computer, can install software and hardware, change security settings, and edit other user accounts. Unless you are aware of the user’s name and password for another account on the computer with administrative rights, you are unable to log on as an administrator if your account type is not Administrator. If you are not an administrator, you can ask to have the type of your account changed. Users should be given access to special Administrator accounts with the proper amount of network access so they can do administrative tasks.
Learn more about An administrator here:
https://brainly.com/question/29846141
#SPJ4
11. Which type of intrusion detection system can also block attacks? a. Inline b. Preline c. Postline d. Passive
Option A. An Inline Intrusion Detection System (IDS) is a type of system that can detect and block malicious activity before it reaches its target. It works by analyzing network traffic as it passes through the system and blocking any suspicious or malicious activity that it detects.
Benefits of an Inline Intrusion Detection SystemAn Inline Intrusion Detection System (IDS) is an effective tool for detecting and blocking malicious activity before it reaches its target. It works by intercepting network traffic as it passes through the system and analyzing it for any suspicious or malicious activity. If any suspicious activity is detected, the system will block it before it reaches its intended destination. This provides an extra layer of security for networks and can help prevent attacks from succeeding. Inline IDS systems are an important tool for keeping networks secure, and they can help reduce the risk of data breaches and other malicious activity.
Learn more about antivirus: https://brainly.com/question/17209742
#SPJ4
when is antifreeze not considered hazardous waste
Answer:
Please read below:
Explanation:
Antifreeze is generally considered hazardous waste if it is no longer suitable for its intended use, or if it has been mixed with other materials that make it a hazardous waste. For example, used antifreeze that is contaminated with oil or other chemicals would be considered hazardous waste. However, if the antifreeze is still in good condition and has not been mixed with any other materials, it would not be considered hazardous waste. It is important to properly dispose of hazardous waste in order to protect the environment and human health.
Which statement best describes an emotionally intelligent leader?
a. A leader who expresses high emotions.
b. A leader who repeats tried-and-tested responses to events. c. A leader who pauses to think before responding. d. A leader who says whatever is on the leader's mind.
Which is not a benefit of EI?
a. Greater commitment. b. Reduced anxiety and stress. c. Increased optimism. d. Flexibility in responding to change.
Which statement best describes EQ?
a. Supports complex reasoning. b. Measurement of cognitive and logical intelligence.I c. Important for intellectually demanding roles. d. Essential to successful management and leadership.
High intelligence and leadership are "moderately correlated; having a leader who is smarter but not too clever works best," according to study studies.
This is so because leadership effectiveness has been found to be positively impacted by leaders with IQs above 120, according to study studies. However, once a leader's IQ rises above 120, the beneficial effects on leadership effectiveness start to steadily decline. Therefore, it can be said that option C is the correct response in this instance. "Moderate; it works best to have a leader who is smarter but not too smart." High intelligence and leadership are "moderately correlated; having a leader who is smarter but not too clever works best," according to study studies. Global leaders are those who have a broad perspective on various corporate events and have interacted with many cultures from around the world. Global leaders are those who have a broad perspective on various corporate events and have interacted with many cultures from around the world.
Learn more about Leaders here:
https://brainly.com/question/25641054
#SPJ4
expert that helps you learn core concepts.
See Answer
Branch circuits are rated according to their .....................
1) over current protection device rating
2) conductor size
3) length
4) impedance
Branch circuits are rated according to their over current protection device rating. Hence, option 1 is correct.
What is a Branch circuit?
A branch circuit is an electrical circuit in a building that branches off from the main service panel and supplies power to individual electrical loads or devices, such as lights, outlets, and appliances.
The branch circuit includes the conductors and overcurrent protection device that connect the load to the main service panel. Branch circuits are typically rated for a specific amperage, based on the capacity of the overcurrent protection device and the ampacity of the conductors.
To learn more about Branch circuit, visit: https://brainly.com/question/29667880
#SPJ4
A motor terminal housing enclosing rigidly mounted motor terminals shall have a minimum of _______ between line terminals for a 230V motor
For a 230V motor, there must be at least (A) 1/4 inch between line terminals in a motor terminal housing that houses securely mounted motor terminals.
What is a motor?An electrical device that transforms electrical energy into mechanical energy is an electric motor.
The majority of electric motors work by creating force in the form of torque imparted to the motor shaft through the interplay of the magnetic field of the motor and electric current in a wire winding.
An electric motor terminal box features a base and a lid.
The bottom of the base is bent to match the curve of the motor's cylindrical housing.
A conduit can be attached to the base's first and second parts, which are at an angle to one another.
So, in the given situarion, in a motor terminal housing that houses firmly installed motor terminals, there must be at least 1/4 inch between line terminals for 230V motors.
Therefore, for a 230V motor, there must be at least (A) 1/4 inch between line terminals in a motor terminal housing that houses securely mounted motor terminals.
Know more about a motor here:
https://brainly.com/question/18619348
#SPJ4
Complete question:
A motor terminal housing enclosing rigidly mounted motor terminals shall have a minimum of _____________ between line terminals for a 230V motor.
(a) 1/4 in.
(b) 3/8 in.
(c) 1/2 in.
(d) 5/8 in.
How would you join two separate bodies in Fusion 360? Copy and paste them on the canvas. Right-click the body in the browser > Create Component from Bodies. Modify > Combine. Where in Fusion 360 would you create a new project? a. In the file menu. b. In the data panel. c. Click File > Save As.
To join two separate bodies in Fusion 360, you can use the "Combine" command located in the "Modify" menu, which is in the data panel. You can create a new project by clicking on the "New" button located on the startup screen when you first open the program or by going to the "File menu".
How would you join two separate bodies in Fusion 360?
To join two separate bodies in Fusion 360, you can use the "Combine" command located in the "Modify" menu.
You can also use the "Create Component from Bodies" option by right-clicking the body in the browser, then use the "Assemble" command located in the "Assemble" drop-down menu to join the component to another component or an existing design.
Where in Fusion 360 would you create a new project?
In Fusion 360, you can create a new project by clicking on the "New" button located on the startup screen when you first open the program or by going to the "File" menu and selecting "New". You can also create a new project by clicking on the plus sign button on the top right corner of the data panel.
To know more about Fusion 360, visit: https://brainly.com/question/30161637
#SPJ4
what are AWS services that help you automate deployment of AWS resources in predictable, controlled ways?
Automatic rollbacks, automated state management, and resource management across accounts and regions are all made possible by AWS Cloud formation, which was created to make it posible to manage resource lifecycles in a repeatable, predicstable, and secure manner.
What is AWS Cloud?An Amazon subsidiary called Amazon Web Services, Inc. (AWS) offers metered, pay-as-you-go on-demand cloud computing platforms and APIs to people, businesses, and governments.
Clients frequently utilize this in addition to autoscaling (a process that allows a client to use more compute in times of high application usage, and then scale down to reduce costs when there is less traffic).
Through AWS server farms, these cloud computing web services offer a range of services for networking, computing, storage, middleware, IOT, and other processing resources, as well as software tools.
Clients are relieved of administering, scaling, and patching operating systems and hardware thanks to this.
Amazon Elastic Compute Cloud (EC2), one of the fundamental services, enables users to have at their disposal.
Hence, Automatic rollbacks, automated state management, and resource management across accounts and regions are all made possible by AWS Cloud formation, which was created to make it posible to manage resource lifecycles in a repeatable, predicstable, and secure manner.
learn more about AWS click here:
https://brainly.com/question/28145530
#SPJ4
Automatic rollbacks, automated state management, and resource management across accounts and regions are all made possible by AWS Cloud formation, which was created to make it posible to manage resource lifecycles in a repeatable, predicstable, and secure manner.
Amazon Web Services, Inc. (AWS) is an Amazon subsidiary that provides metered, pay-as-you-go on-demand cloud computing platforms and APIs to individuals, businesses, and governments.
Clients frequently use this in conjunction with autoscaling (a process that allows a client to use more compute in times of high application usage, and then scale down to reduce costs when there is less traffic).
These cloud computing web services provide a variety of networking, computing, storage, middleware, IOT, and other processing resources, as well as software tools, via AWS server farms.
This relieves clients of the burden of administering, scaling, and patching operating systems and hardware.Amazon Elastic Compute Cloud (EC2), one of the fundamental services, enables users to have at their disposal.
Hence, Automatic rollbacks, automated state management, and resource management across accounts and regions are all made possible by AWS Cloud formation, which was created to make it posible to manage resource lifecycles in a repeatable, predicstable, and secure manner
.To know more about AWS kindly visit
brainly.com/question/28145530
#SPJ4
When an airfoil passes through the relative wind, high-pressure air on the underside tries to spill over to fill the low pressure that has been created on the top. This creates a swirling effect known as
This creates a swirling effect known as: Vortex shedding.
When an airfoil passes through the relative wind, high-pressure air on the underside attempts to move to the top, creating a swirling effect known as vortex shedding.
Vortex Shedding: A Phenomenon Created by Airfoil Movement Through Relative WindVortex shedding is a phenomenon that occurs when an airfoil passes through the relative wind, creating a swirling effect as high-pressure air on the underside attempts to fill the low-pressure area created on the top. This is caused by the airspill over from the high-pressure air below and the formation of vortices that cause the air to swirl around the airfoil. The vortices will be generated on either side of the airfoil and will travel along its surface, creating drag and turbulence.
Learn more about Vortex: https://brainly.com/question/3184914
#SPJ4
Which of the following is a qualitative forecasting method?
A) trend projection
B) linear regression
C) exponential smoothing
D) Delphi method
The Delphi method is a qualitative forecasting method that is used to gather and combine the opinions of a panel of experts. Hence, the correct answer is D. Delphi method.
What exactly is Delphi method?It is typically used in situations where there is a lack of historical data, or when the future is uncertain and difficult to predict. The Delphi method is a structured process that involves several rounds of questionnaires, feedback, and discussion among the panel of experts.
The goal is to achieve a consensus or a group opinion on a specific topic or forecast. The Delphi method is often used in fields such as business, economics, and public policy to make predictions about future trends and developments.
To know more about economics in engineering visit: https://brainly.com/question/19629840
#SPJ4
QUESTION 16 / 18 Your manager asks you to set up a secure network connection at a remote site to move over some backups. Which protocol would you use? SELECT ONLY ONE a. SFTP b. FTP c. SSH d. IP e. DHCP
Since your manager asked you to set up a secure network connection at a remote site to move over some backups, a protocol which you should use include the following: C. SSH.
What is a protocol?In Computer technology, a protocol can be defined as a terminology which is used to describe formatted blocks of data that have been designed, developed, and established by network communication professionals to obey a set of standard rules and conventions when transmitting data on a network device and over the internet or world wide web (WWW) such as the following:
SFTP FTP SSH IPSNMPDHCPWhat is SSH?In Computer technology, SSH is an abbreviation for secure shell and it can be defined as a network protocol that gives an administrator a secure way to access data over an unsecured network.
In this context, we can reasonably infer and logically deduce that secure shell (SSH) is a protocol that can be used by a network administrator to set up a secure network connection at a remote site in order to move over some backup files.
Read more on SSH here: https://brainly.com/question/24422472
#SPJ1
Load Balancers are appropriate for which purposes? Select all that apply. a. Off-loading overhead of protocols like TLS b. Implementing Application Logic code that is hard to implement on Backends c. Providing High Availability d. Distributing Clients amongst Backends
The purpose of load balancers is off-loading overhead of protocols like TLS.
Why load balancers is used?Load balancers has been used to offload the overhead of encrypting and the decrypting traffic will be using the protocols like Transport Layer Security (TLS). This has been useful for improving the performance of a system by allowing the backend servers to focus.
The load balancer has been establishes the separate secure connection to the backend servers using a different set of keys. This has been allows the load balancer to the handle that overhead of encryption and decryption, while the backend servers can focus on processing the request and generating a response.
Therefore, The purpose of load balancers is off-loading overhead of protocols like TLS.
Learn more about balancers on:
https://brainly.com/question/28699225
#SPJ1
Which of the following is a measure of the amount of suspended material in water?
Select one:
a. Turbidity
b. pH
c. Alkalinity
d. Salinity
e. Trace-metal concentration
The measure of the amount of suspended material in water is Turbidity.
Turbidity is a measure of the amount of suspended material in water, such as clay, silt, plankton, or other particulate matter. It is typically measured in units of NTU (Nephelometric Turbidity Units) or JTU (Jackson Turbidity Units) using a turbidimeter.
pH is a measure of the acidity or basicity of a solution, with a value of 7 indicating neutral, values less than 7 indicating acidity, and values greater than 7 indicating basicity.
Alkalinity is a measure of the water's ability to neutralize acids, typically measured in ppm (parts per million) or meq/L (milliequivalents per liter).
Salinity is a measure of the concentration of dissolved salts in water, typically measured in parts per thousand (‰) or practical salinity units (PSU).
Trace-metal concentration is a measure of the amount of metal ions present in water, typically measured in parts per billion (ppb) or parts per million (ppm).
Learn more about Turbidity here: https://brainly.com/question/28022211
#SPJ4
