Answer:
The building is 176.4 meters high.
Explanation:
We use the formula for kinematics of an accelerated object (in this case acceleration of gravity):
Distance travelled = 1/2 g t^2
Distance travelled = 1/2 9.8 (6)^2 = 176.4 meters
A 0.41kg football that is initially at rest acquires a velocity of 35m/s when it is kicked. If the kicker's boot remains in contact with the ball for 0.08s, what is the average force of the kick?
Answer:
F = 318.88[N]
Explanation:
This problem can be solved by the principle of momentum conservation, which tells us that momentum is preserved before and after kicking the ball.
In this way, we can construct the following equation.
[tex]F*t=m*v[/tex]
where:
F = force [N]
t = time = 0.08 [s]
m = mass = 0.41 [kg]
v = velocity [m/s]
[tex]F*0.045=0.41*35\\F=318.88[N][/tex]
4. A disobedient student dropped his Physics textbook (mass 0.1kg) from the window (15m above the ground). How fast was it going when it hit the ground?
Answer:
v= 17.15 m/s
Explanation:
mass of the book=0.1 Kg
height above ground, h= 15 m
Using conservation of energy
Potential energy is converted into kinetic energy
[tex]mgh = \frac{1}{2}mv^2[/tex]
[tex]v=\sqrt{2gh}[/tex]
[tex]v=\sqrt{2\times 9.8\times 15}[/tex]
[tex]v=\sqrt{294}[/tex]
v= 17.15 m/s
Hence, the book will hit the ground at the speed of 17.15 m/s.
Do you know how to do this clever ones hmmm?? Describe and explain the motion of a small ball floating on a pond when waves travel across the pond.
Answer:
Ball moves up and down repeatedly on surface because waves consist of successive crests and troughs moving across surface, each crest pushes ball up and each trough allows it to move down.
Explanation:
A rectangular block weighs 240 N. the area of the block in contact with the floor is 20 cm2.calculate the pressure on the floor(give your answer in N/cm2
Help me Fast as you can,,
Answer:
12 N/cm²
Explanation:
From the question given above, the following data were obtained:
Weight (W) of block = 240 N
Area (A) = 20 cm²
Pressure (P) =?
Next, we shall determine the force exerted by the block. This can be obtained as follow:
Weight (W) of block = 240 N
Force (F) =.?
Weight and force has the same unit of measurement. Thus, we force applied is equivalent to the weight of the block. Thus,
Force (F) = Weight (W) of block = 240 N
Force (F) = 240 N
Finally, we shall determine the pressure on the floor as follow:
Force (F) = 240 N
Area (A) = 20 cm²
Pressure (P) =?
P = F/A
P = 240 / 20
P = 12 N/cm²
Therefore, the pressure on the floor is 12 N/cm².
3. A coil of 100 turns encloses an area of 100 cm2. It is placed at an angle of 700 with a
magnetic field of 0.1 Wbm-2. What is the magnetic flux through the coil? If the magnetic
field is reduced to zero in 10-3s, what emf is induced in the coil?
Explanation:
Given that,
Number of turns in the coil, N = 100
Area of the coil, A = 100 cm² = 0.01 m²
It is placed at an angle of 70°.
Magnetic field, B = 0.1 Wb/m²
We need to find the magnetic flux through the coil and the emf is induced in the coil after 10⁻³ s.
Magnetic flux is given by :
[tex]\phi =BA\cos\theta\\\\\text{For N turns},\\\phi =NBA\cos\theta \\\\\phi=100\times 0.1\times 0.01\times \cos(70)\\\\=0.034\ Wb[/tex]
So, the magnetic flux through the coil is 0.1 Wb.
Emf induced in the coil is :
[tex]\epsilon=\dfrac{-d\phi}{dt}\\\\=\dfrac{0.034}{10^{-3}}\\\\=34\ V[/tex]
So, 34V of emf is induced in the coil.
Q3) Salman walks to the mosque with speed 2.4 m/s. If it takes him 3 min to
reach the mosque. Find the distance.
Answer: 432m
Explanation:
Convert 3 min to seconds
1 min = 60 sec
3 min = 180 sec
Multiply the speed times time to get distance.
2.4 x 180 = 432m
Determine the absolute pressure on the bottom of a swimming pool 30.0 mm by 8.4 mm whose uniform depth is 1.9 mm .
Answer:
=101343.62N/m^2
Explanation:
absolute pressure on the bottom of a swimming pool= atmospheric pressure +( 2 ×ρ ×g)
( 2 ×ρ ×g)= guage pressure
atmospheric pressure= 101325pa
h= height= 1.9 mm = 1.9×10^-3m
ρ = density of water
= 1000kg/m^3
g= acceleration due to gravity= 9.8m/s^2
Then substitute, we have
absolute pressure on the bottom of a swimming pool= 101325+ [0.0019 ×1000 × 9.8)]
=101343.62N/m^2
Hence, the absolute pressure on the bottom of a swimming pool is =101343.62N/m^2
A horizontal force of 90.7 N is applied to a 40.5 kg crate on a rough, level surface. If the crate accelerates at 1.08 m/s, what is the magnitude of the force of kinetic friction (in N) acting on the crate?
Why is 1/2kx^2=gym not a linear equation
Rogue waves in the ocean were considered a myth for a very long time, fanciful and fabricated tales of fishermen too long in the sun and on the sea. What basic physics mechanism provides an explanation of their existence
Answer:
D. Constructive Interference of waves
Explanation:
Rogue waves occur when wave forms arrive suddenly in oceans, thus causing ships to sink within a very short time. The explanation scientists have for this is constructive interference magnified by second-order bound non-linearities. Waves are meant to arrive in a particular direction. During constructive interference, these waves arrive from different directions and in an organized way thus increasing the height of the wave.
This increased height is as a result of the waves not being in a linear form and having sharp peaks. There is also a significant difference between the crests and troughs. Scientists arrived at this explanation for the rogue waves though three experiments conducted in 1997, 2007, and 2015.
A force can change an object's direction and cause friction
True or False
Answer:
This is very true
Explanation:
The force from impact can easily change it to expanse in a different direction.
I hope this helped you very much :)
PLz help I will give you brainliest for real
How you feel on days when you do exercise compared to days when you don't exercise
Answer:
When i do exercise i feel great and happy afterwards ( there is a proven fact that after you go on a run, play a sport, or exercise you are proven to be more upbeat )
When i don't exercise i feel kinda lazy and tired mostly bored.
Hurry need an answer
Answer:
i think b
Explanation:
how are hydrosphere, atmosphere, Biosphere, and Biosphere connected to one another
Explanation:
Such spheres are intimately connected. Many animals (biosphere), for example, migrate through to the sky, while groundwater (hydrosphere) also flows through the ground (lithosphere). The domains are actually so closely related that a shift in one globe always results in a shift in one or both of some other spheres.
Optimus Prime is flying straight up at 24 m/s when he accidentally drops his mega-ray blaster and it falls 94 m to the ground below. Calculate how long it takes for his mega-ray blaster to hit the ground.
Answer:
The time it will take the mega-ray blaster to hit the ground is 2.57 s.
Explanation:
Given;
initial velocity of Optimus Prime, u = 24 m/s
height of fall of the mega-ray blaster, h = 94 m
The time of fall of the mega-ray blaster is calculated using the following kinematic equation;
[tex]h = ut + \frac{1}{2}gt^2\\\\94 = 24t + \frac{1}{2}(9.8)t^2\\\\94 = 24t + 4.9t^2\\\\4.9t^2 +24t -94 = 0\\\\Use \ formula \ method \ to \ solve \ for \ "t"\\\\a = 4.9 , b = 24, c = -94\\\\t = \frac{-b \ +/- \ \sqrt{b^2 -4ac} }{2a} \\\\t = \frac{-24 \ +/- \ \sqrt{(24)^2 -4(-94 \times4.9)} }{2(4.9)} \\\\t = \frac{-24 \ +/- \ \sqrt{2418.4} }{9.8}\\\\t = \frac{-24 \ +/- \ 49.177 }{9.8}\\\\t = \frac{-24 \ +\ 49.177 }{9.8} \ \ or \ \ t = \frac{-24 \ -\ 49.177 }{9.8} \\\\[/tex]
[tex]t = 2.57 \ s \ \ or \ \ t = -7.47 \ s[/tex]
t = 2.57 s
Therefore, the time it will take the mega-ray blaster to hit the ground is 2.57 s.
please help thank you
which of the following statements BEST describes the difference between an atom and an ion ?
Answer:
well the correct answer is
d. An atom contains equal numbers of protons and electrons whereas an ion contains unequal numbers of protons and electrons .Explanation:
A charged atom is known as an ion, well it can be negative as well as positive charge.
if atom has more protons than electrons then it get positively charged and known as cationif the atom has more electrons that the number of protons then the atom get negatively charged and known as anionThe football team is selling mulch as a fundraiser. Which two options are
advantages of putting the order form online?
A. This information is transmitted using analog signals, so more
information can be sent.
B. This information is transmitted digitally, making it more reliable.
C. Any noise affecting the analog signal can be easily interpreted
correctly.
O D. Noise does not affect the digital signal, making it more reliable.
Answer:
Noise does not affect the digital signal, making it more reliable. This information is transmitted digitally, making it more reliable
Explanation:
Just did it on Ape.x
This information is transmitted digitally, making it more reliable. Noise does not affect the digital signal, making it more reliable. The correct options are B and D.
What is digital transmission?The transfer and reception of data in the form of a digital bitstream or a digitized analogue signal transmitted through a point-to-point or point-to-multipoint communication channel is known as data transmission and reception, or, more broadly, data communication or digital communications.
Because digital switching systems are substantially less expensive than analogue switching systems, digital transmission is used to achieve high reliability.
However, the analogue signals that make up the majority of speech, radio, and television must be used for digital transmission.
This information is more dependable because it is conveyed digitally. The digital signal is unaffected by noise, increasing its dependability.
Thus, B and D are the correct options.
For more details regarding digital transmission, visit:
https://brainly.com/question/29393615
#SPJ5
What are your thoughts about Russia getting banned from the 2020 Olympics and 2022 World cup?
Two skaters, each of mass 51.2 kg, approach each other along parallel paths separated by 2.92 m. They have equal and op- posite velocities of 1.38 m/s. The first skater carries a long light pole 2.92 m long, and the second skater grabs the end of it as he passes; see Fig. 10-30. Assume frictionless ice. (a) Describe quantitatively the motion of the skaters after they are connected by the pole. (b) By pulling on the pole, the skaters reduce their separation to 0.940 m. Find their angular speed then.
Answer:
a) w = 0.4726 rad / s, b) w_{f} = 4.56 rad / s
Explanation:
a) the two skaters have an angular momentum, for which we will form a system formed by the two of them, in this case when they collide the forces are internal and the moment is conserved.
Initial instant. When the skaters approach, just before touching
L₀ = r p = r m v
in this case the result is the same if we take the reference system at the midpoint or on one of the skaters. We place the reference system on one of the skaters
Final moment. After being joined by the pole
[tex]L_{f}[/tex] = I w
as the forces are internal, the ngualr moment is conserved
L₀ = L_{f}
r m v = I w
suppose we approximate the skaters as particles
I = m r²
we substitute
r m v = m r² w
w = v /r
we calculate
w = 1.38 /2.92
w = 0.4726 rad / s
What happens is that when the two skaters lower the pole, their velocity acts as a torque, creating a rotational movement with angular velocity w.
b) When the skaters who are at r₀ = 2.92 m approach [tex]r_{f}[/tex] = 0.940 m as the system is isolated, the angular momentum is conserved
initial instant. r₀ = 2.92
L₀ = I w
final instant r_{f} = 0.940 m
L_{f} = I_{f} w_{f}
L₀ = L_{f}
I w = I_{f} w_{f}
let's approximate skaters as particles
I = m r²
we substitute
m r² w = m r_{f}² wf
[tex]w_{f}[/tex] = [tex]\frac{r^{2} }{r_{f}^{2} } w[/tex]
we calculate
w_{f} = [tex]\frac{2.92^{2} }{ 0.940^{2} }[/tex] 0.4726
w_{f} = 4.56 rad / s
we see that the angular velocity increases
A local FM radio station broadcasts at a frequency of 97.3 MHz. Calculate the energy of the frequency at which they are broadcasting. Energy
Answer:
6.45×10¯²⁶ J
Explanation:
From the question given above, the following data were obtained:
Frequency (f) = 97.3 MHz
Energy (E) =?
Next, we shall convert 97.3 MHz to Hz. This can be obtained as follow:
1 MHz = 1×10⁶ Hz
Therefore,
97.3 MHz = 97.3 MHz × 1×10⁶ Hz / 1 MHz
97.3 MHz = 9.73×10⁷ Hz
Thus, 97.3 MHz is equivalent to 9.73×10⁷ Hz.
Finally, we shall determine the energy at which the frequency is broadcasting. This can be obtained as follow:
Frequency (f) = 9.73×10⁷ Hz
Planck's constant (h) = 6.63×10¯³⁴ Js
Energy (E) =?
E = hf
E = 6.63×10¯³⁴ × 9.73×10⁷
E = 6.45×10¯²⁶ J
Therefore, the energy at which the frequency is broadcasting is 6.45×10¯²⁶ J
A 3.8kw elective motor powers an inclined conveyer belt. It is designed to lift heavy boxes from the warehouse floor to loading bay. Answer the following:
a)State the energy conversion performed by the motor
b) Calculate the work done by the motor in 14 s
c) If the conveyer belt takes 14 to lift its load vertically by 5.3m, calculate the maximum mass that can carried by the conveyer belt maximum mass that can be carried by the conveyer belt
d) If a small box were to fall off the conveyer belt and hit the floor, calculate the speed at which it would hit the ground if falls from a vertical height of 4.7m
Answer:
See the answer below
Explanation:
To solve this problem we must use the definition of power and work in physics.
a)
The function of the conveyor belt is to carry the boxes from an initial point that is at low altitude to an end point that is at high altitude. In this way the conveyor belt prints a speed to the box to be able to raise it to the required vertical distance.
Since we have a velocity at the beginning and then we place the box at a high position, where then the box remains at rest, we can say that it converts kinetic energy to potential energy.
b)
Power is defined as the relationship of work over time. Therefore we have:
[tex]P=W/t[/tex]
where:
P = power = 3.8 [kW] = 3800 [W]
W = work [J]
t = time = 14 [s]
[tex]W=P*t\\W=3800*14\\W= 53200[J] = 53.2[kJ][/tex]
c)
Since the given time is equal to the given time at Point b, we can use the same work calculated.
We know that work is defined as the product of force by the distance traveled.
[tex]W =F*d[/tex]
So, the force is equal to:
[tex]F=W/d\\F=53200/5.3\\F=10037.73[N][/tex]
Now we know that force is defined as the product of mass by gravitation acceleration.
[tex]F =m*g[/tex]
where:
F = force or weight = 10037.73 [N]
g = gravity acceleration = 9.81 [m/s²]
m = mass [kg]
[tex]m=F/g\\m = 10037.73/9.81\\m = 1023.2 [kg][/tex]
d)
This part can be solved by means of the energy conservation theorem, where the potential energy is transformed into kinetic energy or vice versa.
[tex]E_{pot}=m*g*h = E_{kin}=0.5*m*v^{2}[/tex]
where:
h = elevation = 4.7 [m]
v = velocity [m/s]
[tex]m*g*h=0.5*m*v^{2}\\g*h=0.5*v^{2} \\v=\sqrt{\frac{g*h}{0.5} } \\v=\sqrt{\frac{9.81*4.7}{0.5} } \\v = 9.6 [m/s][/tex]
A woman does 236 J of work
dragging her trash can 24.4 m to
the curb, using a force of 18.9 N.
At what angle was her force
directed?
Answer:
Explanation:
Step one:
Given data
work-done in dragging the trash= 236J
applied force= 18.9N
distance moved= 24.4m
Required
The angle of the applied force
Step two:
We know that work done is
WD= F * distance
The work is the product of the horizontal component of the force and the distance.
Horizontal force = 236 ÷ 24.4
= 9.67 N
Cos θ = Horizontal force ÷ Actual force
Cos θ = (236 ÷ 24.4) ÷ 18.9 = 236 ÷ 461.16
The angle is approximately 59˚
1. What is the significance of the slopes of the two graphs?
2. Using the graphs, calculate the acceleration for each scenario?
3. What is the relationship between force, mass, and acceleration? Explain using data
Answer:
1. The velocity of the wagon decreases when Tradi is in the wagon because the mass increases while the external force stays constant.
2. The basic formula for calculating acceleration is a=F/a
Tommy along, acceleration: it will be 2.5 m/s^2. a=100/40
Tommy + Tradi = it will be about 1.66 m/s^2 since a=100/60
3. Well, you see, F=ma, when mass increases, the force decreases.
The relationship between mass and force is inversely proportional.
According to the graphs, velocity increases when there's less mass, which you could say that they are also inversely proportional.
Another comparison,
As the force applied on an object increases, when the mass stays constant, the acceleration also increases. Which means that they are directly proportional.
A bicycle has a momentum of 36 kg•m/s and a velocity of 4 m/s. What is the mass of the bicycle?
Answer:
45kw45_32+675&453try to get it done
Answer:
A: 9 kg
Explanation:
on edge! hope this helps!!~ ∩(︶▽︶)∩
in 1-2 complete sentences define "opportunity cost " in your own words
Answer:
Here you go, hope this helps! :)
Explanation:
Opportunity cost is the value of the next best thing you give up whenever you make a decision. It is "the loss of potential gain from other alternatives when one alternative is chosen". ... For example, opportunity cost is how much leisure time we give up to work.
Using a pulley, you apply a force of 10 Newtons to life an object that weighs 100 Newtons. What is the mechanical advantage of that pulley?
Answer: 10
Explanation:
The mechanical advantage of that pulley is 10.
What is mechanical advantage?The force amplified by utilizing a tool, mechanical device, or machine system is known as mechanical advantage. To achieve the desired output force amplification, the gadget trades off input forces against movement. The law of the lever serves as a paradigm for this.
Mechanisms are machine parts made to control forces and motion in this way.
Given that: the weighs of the object: W = 100 Newton.
Applied force: F = 10 N.
For using a pulley, you have to apply a force of 10 Newtons to lift an object that weighs 100 Newtons.
Hence, the mechanical advantage of the pulley is
= Weighs of the object/applied force
= 100 Newton / 10 Newton.
= 10.
The mechanical advantage of it is 10.
Learn more about mechanical advantage here:
https://brainly.com/question/16617083
#SPJ5
arrangement in which a light ball hangs from a thread and oscillates freely
Answer:
pendulum
hope it helps! please mark me brainliest..
Thank you! have a good day ahead
The plate area is doubled, and the plate separation is reduced to half its initial separation. What is the new charge on the negative plate
Answer:
Q = 4 Q₀
Explanation:
This is an exercise on capacitors, where the capacitance is
C = [tex]\epsilon_{o} \ \frac{A}{d}[/tex]
if we apply the given conditions
C = \epsilon_{o} \ \frac{2A}{0.5d}
C = 4 \epsilon_{o} \ \frac{A}{d}
let's call the capacitance Co with the initial values
C₀ = \epsilon_{o} \ \frac{A}{d}
C = 4 C₀
The charge on each plate of a capacitor is
Q = C ΔV
If the potential difference is maintained, the new charge is
Q = 4 C₀ ΔV
let's call
Q₀ = C₀ ΔV
we substitute
Q = 4 Q₀
A 755 N box rests on a floor with a coefficient of kinetic friction of 0.600 and a coefficient of static friction of 0.800. What horizontal force is required to start the box moving
Answer:
fr = R× co-efficient
= 755 × 0.80
= 604N
Explanation:
A different bullet has a mass of 0.09 kg. Starting from rest, after its gun's trigger is pulled, a constant force acts on the bullet for the next 0.025 seconds until the bullet leaves the barrel of the gun with a speed of 1,346 m/s.
What force acts on this bullet?
The force acts on this bullet : 4.8456 N
Further explanationGiven
m=0.09 kg
Δt=0.025 s
vo=0(from rest)
vt=1.346 m/s
Required
Force
Solution
Impulse is a change in momentum
I=ΔP
F.Δt=m(vt-vo)
Input the value
F x 0.025 = 0.09(1.346-0)
F=4.8456 N
