Answer
(a) 172.848 grams
(b) 168.584 grams
Explanation
The balanced equation for the reaction of aluminum with chlorine gas is:
[tex]2Al+3Cl_2\rightarrow2AlCl_3[/tex](a) Mass of Al = 35 g
From the Periodic Table;
Molar mass of Al = 27 g/mol
Molar mass of AlCl₃ = 133.34 g/mol
From the balanced equation above; 2 moles Al produced 2 moles AlCl₃
So in grams, 2 mol x 27 g/mol = 54 g Al produced 2 mol x 133.34 g/mol = 266.68 g AlCl₃
Therefore, 35 g Al will form:
[tex]\frac{266.68\text{ g AlCl}_{3}\text{ }\times35\text{ g Al}}{54\text{ g Al}}=172.848\text{ g AlCl}_{3}[/tex]172.848 grams of aluminum chloride will be formed.
(b) Mass of Al = 42.8 g
Also from the Periodic Table; the molar mass of Cl₂ = 70.90 g/mol
From the equation above; 2 mol of Al requires 3 mol Cl₂.
In grams, 2 mol x 27 g/mol = 54 g Al requires 3 mol x 70.90 g/mol = 212.7 g Cl₂
Hence, 42.8 g Al will react with:
[tex]\frac{42.8\text{ g Al }\times212.7\text{ g Cl}_{2}}{54\text{ g Al}}=168.584\text{ g Cl}_{2}[/tex]168.584 grams of chlorine will react completely with 42.8 g of aluminum
6.50×104 +8.70×105
[?]
? ]×10¹ ?
Answer:
9.35 × 10⁵
Explanation:
6.50x10⁴=6500
8.70×10⁵=870000
65000+ 870000= 935000=9.35 ×10 ⁵
While performing the extraction experiment, you were confused between the organic layer and the aqueous one, what is the easiest way to tell which layer is which?
The easiest way to tell which layer is wich, while performing the extraction experiment is to run a little test.
The test will consist on mixing a sample of both layers in different recipients with water.
After mixing them, the recipient with a homogeneous phase will have the aqueous layer, and the other one will be the organic layer.
Answer: The layer on top.
Explanation:
Assuming you were completing an extraction experiment and had a setup similar to the one below then the organic layer will float on top of the aqueous since most non-halogenated organic solvents have a density of less than 1.
Question 16 of 25According to the Gibbs free energy equation, AG = AH-TAS, when is areaction always spontaneous?A. When AH and AS are both positiveB. When AH is negative and AS is positiveC. When AH is positive and AS is negativeD. When AH and AS are both negativeSUBMIT
Answer
B. When ΔH is negative and ΔS is positive
Explanation
The spontaneity of a reaction can be determined by the sign of the Gibbs free energy change. For a spontaneous reaction, the change in Gibbs free energy should be negative, that is:
[tex]\Delta G=\Delta H-T\Delta S[/tex]The spontaneity of a process can depend on the temperature. Since the temperature value here corresponds to the absolute temperature, this implies that T > 0 for any T. Therefore, to have a negative difference for any temperature value, the change in enthalpy (ΔH), should be negative and the change in entropy (ΔS) should be positive so that we always subtract a positive number from a negative number. This corresponds to a negative value in ΔG.
Hence, the
what is the volume (in liters) of a 4.2 gram sample of O2 at STP
to solve this we need to use the ideal gas law:
[tex]PV=nRT[/tex]we need to calculate the number of mols of O2
[tex]n=\frac{m}{Mm}=\frac{4.2g}{32\text{ g/mol}}=0.131mol[/tex]Now we just have to solve for volume and use the number of mols just calculated and the standard pressure (1 atm) and temperature 273.15K:
[tex]V=\frac{nRT}{P}=\frac{0.131mol\cdot0.082\text{ }\frac{atm\cdot l}{K\cdot mol}273.15K}{1atm}=2.94l[/tex]A given sample of gas is held in a container with the volume of 6.02 L with a temperature of 59.5℃ at a pressure of 1.20 atm. What is the final pressure
The final pressure of a sample of gas held in a container with a volume of 6.02 L and a temperature of 59.5℃ is 0.26atm.
How to calculate pressure?The pressure of a given gas can be calculated using Boyle's law equation as follows:
P₁V₁ = P₂V₂
Where;
P₁ = initial pressureV₁ = initial volumeP₂ = final pressureV₂ = final volumeT₁ = initial temperatureT₂ = final temperatureAccording to this question, a given sample of gas is held in a container with the volume of 6.02 L with a temperature of 59.5℃ at a pressure of 1.20 atm. The final pressure can be calculated as follows;
At STP;
V = 22.4LT = 273K1.2 × 6.02/332.5 = P × 22.4/273
0.0217 = 0.082P
P = 0.26atm
Therefore, 0.26atm is the final pressure of the gas.
Learn more about pressure at: https://brainly.com/question/10175101
#SPJ1
What is the specific heat capacity of methanol (C) if it takes 7,490 joules of energy to heat 50.0 grams from 10.0 0C to 80.0 0C?
The formula for calculating the amount of heat energy absorbed is given as:
[tex]Q=mc\triangle t[/tex]Given the following
• mass m = 50.0g
,• Heat energy Q = 7490 Joules
,• change in temperature = 80 -10= 70 degrees celsius
Substitute
[tex]\begin{gathered} 7490=50\times c\times70 \\ c=\frac{7490}{3500} \\ c=2.14J\text{/}g^oC \end{gathered}[/tex]Hence the specific heat capacity of methanol is 2.14J/gC
Which is the least electronegative element?Group of answer choicescarbonnitrogenoxygenaluminum
In order to solve this question, we can use the electronegativity table (or also just a regular periodic table), which will give us the values of electronegativity for each element.
As we can see in this table, the least electronegative element will be Al, with only 1.61 of value. If you were with a regular periodic table, you could find this answer by thinking about the periodic table trend, or we can also call it a rule, that in most elements the electronegativity will grow in value from left to right and from the bottom to the top, then you would also get Al as your answer
Answer = Al, letter D
You randomly fina a brick labeled platinum! You get really excited because you look it up and find that platinum is worth $31.86 per gram.then density of platinum is 21.45 g/mL. You measure the volume and it’s 150 cm3 or 150.0mL. How much should the brick weigh if it’s is really platinum? And how much money would the brick be work
Step 1
Density is defined as:
D = mass of the platinum brick/volume of the platinum brick
D = m/V
------------------
Step 2
Information provided:
D = 21.45 g/mL
V = 150.0 mL
m = unknown
Price per grams of Pt = 31.86 $/g of Pt
Symbol for platinum = Pt (please, look at the periodic table)
-----------------
Step 3
How much should the brick weigh if it’s is really platinum?
From D = m/V
=> D x V = m
=> 21.45 g/mL x 150.0 mL = 3218 g approx.
------
And how much money?
3218 g of Pt x 31.86 $/g of Pt = $99,660 approx.
Answer:
3218 g
$99,660
A student finds a piece of metal and finds its mass to be 750 g. Through water displacement thestudent determines the volume to be 65.8 cm". Which metal does the student have?
Metals normally have different densities, so we can try to determine which metal is this by its density.
Assuming it is pure, the density of the metal is its mass divided by its volume:
[tex]\begin{gathered} \rho=\frac{m}{V} \\ \rho=\frac{750g}{65.8cm^3} \\ \rho\approx11.4g/cm^3 \end{gathered}[/tex]Now, we need to look for some table with densities of various metals and see which one has the density we found, 11.4 g/cm³.
Since we don't have one, we can look for one. In it, we can see that the only metal with this density is lead.
So, the metal in the question should be lead.
A student dissolves a white crystalline solid substance in water to form a solution. When a conductivity meter is immersed in the solution, the reading recorded was 35.80 mSiemens/cm. Which of the following compounds could be the solute in this solution?
ANSWER
STEP-BY-STEP EXPLANATION
what is the pH of a neutral solution? a.10 b. 7c. 14 d. 0
According to the pH scale, the pH can range from 0 to 14, and the lower the pH, the more acidic the solution is, the same goes if the pH is higher, the solution will be basic. These two informations are based on the neutral value of pH, which is 7. Letter B is the answer
I need help on this!! it’s due today! will mark brainliest if it’s correct
Nuclear fission causes a neutron to split the isotope U-235 when it collides with its nucleus. When a slow neutron interacts with a heavy nuclide like 235U, nuclear fission can occur (0.025 eV).
What happens when uranium-235 atoms are bombarded by slow moving neutrons?When a slow neutron interacts with a heavy nuclide like 235U, nuclear fission can occur (0.025 eV). If a fission (or splitting apart) occurs, the nuclear material splits into two (on average) about equal fragments that travel away with kinetic energy, producing heat.
Nuclear fission causes a neutron to split the isotope U-235 when it collides with its nucleus. Two or three additional neutrons as well as fission products are released during this fission process. The chain reaction is continued by some of the emitted neutrons. There is significant energy released in every fission reaction.
When a uranium atom divides, additional neutrons are also released. The process keeps repeating again as these neutrons keep crashing into more uranium atoms. This process is called a nuclear chain reaction. This reaction is controlled in nuclear power plant reactors to produce a desired amount of heat.
To learn more about nuclear fission refer to:
https://brainly.com/question/3992688
#SPJ13
i need help with chemistry
Answer:
2.04×10^25
Explanation:
multiply with 10^9
The combustion of glucose is represented by the following balanced equation:
In order to find limiting and excess reactants, we need to first, set up the equation, and it must be properly balanced:
C6H12O6 + 6 O2 -> 6 H2O + 6 CO2
1 gram of C6H12O6
1 gram of O2
From the balanced equation, we see that the molar ratio between C6H12O6 and O2 is 1:6, this means that 1 mol of C6H12O6 will react with 6 times the number of moles of O2
Now let's find the number of moles of C6H12O6, the molar mass is 180.16g/mol
180.16 g = 1 mol
1 g = x moles
x = 0.005 moles of C6H12O6, now we will need this number of moles times 6 in order to proceed with the reaction
1 C6H12O6 = 6 O2
0.005 C6H12O6 = x O2
x = 0.03 moles of O2
And this amount of moles with the molar mass of O2, which is 32g/mol
32 g = 1 mol
x grams = 0.03 moles
x = 0.96 grams of O2 in 0.03 moles
Since we have more oxygen than what we actually need, Oxygen is in excess and C6H12O6 is the limiting reactant
The half-life of phosphorus−33 is 25.0 days. How much of a 2.7−oz sample of phosphorus−33 will remain after 150 days?
If phosphorus-33 have an half-life of 25 days the amount of phosphorus-33 that will remain after 150 days is 0.042 oz.
What is half-life?Half-life is the time taken for half the sample of a radioactive substance to decay.
To calculate the amount of phosphorus-33 that will remain after 150 days, we use the formula below.
Formula:
R' = R/[tex]2^{T/t}[/tex]........ Equation 1Where:
R = Original amount of phosphorus-33R' = Amount of phosphorus-33 that will remain after 150 daysT = Total timet = half-lifeFrom the question,
Given:
R = 2.7 ozT = 150 dayst = 25 daysSubstitute these values into equation 1
R' = 2.7/([tex]2^{150/25[/tex])R' = 2.7/[tex]2^{6}[/tex]R' = 2.7/64R' = 0.042 ozHence the amount of phosphorus-33 that will remain after 150 days is 0.042 oz.
Learn more about half-life here: https://brainly.com/question/25750315
#SPJ1
A 7.94 g of solid CO2 (Dry ice) is allowed to sublime in a balloon. The final volume of the balloon is 1.00 L at 301 K. What is the pressure?
In order to find the pressure in this situation, we will be using the Ideal gas Law, which perfectly correlates these informations, the formula for this Law is:
PV = nRT
Where:
P = pressure, we want to find it
V = volume, 1.00 L
n = number of moles, we will also find it
R = is the gas constant, 0.082
T = 301 K
To find the number of moles, we need to use the mass provided in the question and also the molar mass of CO2, 44.01g/mol
44.01g = 1 mol
7.94g = x moles
x = 0.180 moles of CO2
Now we can use the ideal gas formula:
P * 1.00 = 0.180 * 0.082 * 301
P = 4.44 atm
why show you heat the sample to constant mass
Heating to constant mass is done to retain the constant mass of the sample so that its weight remains the same and does not affect the reading throughout the experiment.
Heating to constant mass is a process in which a sample usually a powder or crystal is heated until the mass of the sample remains constant or the same.This is done to remove the excess moisture or other impurities that may affect the accuracy of the readings during the experiment.In this process, the sample is heated, cooled down weighed, and again the sample is heated, cooled down, and weighed. This process is done repeatedly until the mass of the sample remains constant in two or three consecutive measurements. Thus, heating to constant mass gives a minimized error during the experiment.To learn more about how the mass number is calculated for an element click below:
https://brainly.com/question/295273
#SPJ4
______ oil drop experiment measured the size of the ____ on the____ .
Millikan's oil drop experiment measured the size of the electric charge on the electron.
What is an Experiment?This is referred to as a type of procedure which is carried out in other to accept or refute a hypothesis. Electron on the other hand, is the negatively charged subatomic particle which is present in an atom and are involved in the formation of new substances during a chemical reaction.
Millikan's oil drop experiment measured the size of the electric charge on the electron and used tiny drops of oil which helped in the calculation of the charge and the mass of an electron.
Read more about Experiment here https://brainly.com/question/17274244
#SPJ1
Calculate the energy and frequency of red light having a wavelength of 650 nm (Note => 650 nm = 6.50 * 10^7 m)
The energy and frequency of the red light would be 2.88 × 10⁻¹⁹ Joules and 4.615 × 10¹⁴ Hz respectively if the red light has a wavelength of 650
nm.
What is Wavelength?It can be understood in terms of the distance between any two similar successive points across any wave for example wavelength can be calculated by measuring the distance between any two successive crests.
C = λν
As given in the problem we have to calculate the energy of the light if the wavelength of light is 6.5 × 10⁻⁷ meters.
The frequency of the red light = 3 × 10⁸ / 6.5 × 10⁻⁷
= 4.615 × 10¹⁴ Hz
The energy of the red light = h ν
= 6.26 × 10⁻³⁴ × 4.615 × 10¹⁴
= 2.88 × 10⁻¹⁹ Joules
Thus, the energy and frequency of the red light would be 2.88 × 10⁻¹⁹ Joules and 4.615 × 10¹⁴ Hz respectively.
To learn more about wavelength, refer to the link given below ;
brainly.com/question/7143261
#SPJ1
Can I know the answer ？
According to the given statement Mass of one atom of gold in grams is 196.78 g.
What is a atom ?A chemical element is uniquely defined by its atoms, that are small bits of substance. An atom is made up of a core nucleus one and or more negatively charged electrons that orbit it. The positively charged, relatively hefty protons and neutrons that make it up the nucleus may be present.
Who discovered the atom?Up until the 1800s, this idea of tiny, indivisible pieces of matter remained. The contemporary atomic idea was really started by the eminent chemist John Dalton (1766–1844). But his atom was like a rock-solid ball.
Briefing:Molar mass is the weight in grams of one mole of an atom.
1 mole = 6.022×10²³ atoms
Molar mass of Gold (Au)
= mass of an atom × number of atoms
=3.207×10-²²×6.022×10²³
=196.78g.
To know more about Atom visit:
https://brainly.com/question/1566330
#SPJ13
An experiment was designed to test the hypothesis that peanuts have more energy than a chip. The experiment determines calorimetry of the peanut and the chip, using water to capture the energy of the samples when they were burned. A 10 g sample of chip and a 15 g sample of peanut was burned underneath a metal can that held 50 g of water. A thermometer captured how much the temperature of the water increased. The water increased by 7 degrees for the peanut and 3 degrees for the chip. What error was made?
a The temperatures were read wrong.
b Different amounts of food samples were used.
c The food samples were too similar.
d Different amounts of water were used.
Answer:
b Different amounts of food samples were used.
Explanation:
The mass of the two samples needs to be the same in order for the test to be accurate.
What functional group is found in amino acids?A) aminesB) alkanesB) cyclic hydrocarbon ringsC) alcohols
Answer:
[tex]A)\text{ Amines}[/tex]Explanation:
Here, we want to get the functional group is found in amino acids
In the amino acids, we can get amines, carboxylic acid groups, and the carbon chain
Looking at the options, we can see that the amine group is the right option here as the other two are not available
Which of the following is an element located in group 17?
a) Ne
b) Li
c) Mn
d) Br
Answer:
D- Br
Explanation:
At a pressure of 1.00atm the solubility of nitrogen in water is 23.5mg gas/100g water. Indicate whether each of the following changes would increase or decrease the solubility of nitrogen in water
Solubility of a substance changes as the pressure changes. If the pressure is high, solubility increases. When pressure is low, solubility decreases.
At 1 atm the solubility of Nitrogen in water is 23.5 mg gas/110g water.
The solution is submerged 40 m under water. Solubility increase.
The solution is carried to the top of a mountain. Solubility decrease.
The solution is placed in a chamber where the pressure is 0.50 atm. Solubility decrease.
The solution is brought into outer space. Solubility decrease.
The solution is canned at a pressure of 2.04 atm. Solubility increase.
1. Find the elements sodium, oxygen, and phosphorus on the periodic table. Describe the monoatomic ions each would form. Then, given what you know about chemical bonding, describe and give the formulas for the types of ionic compounds they would produce with each other. Use the periodic table in the Chemistry: Problems and Solutions book to help with your answers.2. Given the chemical formulas of the following compounds, name each compound and state the rules you used to determine each name.KIFe2O3(NH4)3PO4
Answer for 2:
- KI: potassium iodide
- Fe2O3: diiron trioxide
- (NH4)3PO4: ammonium phosphate
Explanation for 2:
• KI,:
The compound KI is called potassium iodide, because it is a hydracid salt that has potassium in the positive parte (that's why it keeps the name of the metal). While the negative parte of the salt comes from the non-metal iodine.
• Fe2O3,:
The compound Fe2O3 is called
, because the molecule of this oxide has 3 oxygen atoms and 2 iron atoms.
• (NH4)3PO4:
The (NH4)3PO4 is a salt called ammonium phosphate, because it is formed from phosphoric acid (that gives the negative part of the salt), and ammonia (that gives the positive part of the salt). The negative part of salt ends in "...ate" because it comes from the acid that ends with the suffix "...ic".
Calculate the total energy 2.3 * 10^11 photons of gamma radiation having a wavelength of 3.9 * 10^-12 m
According to the Planck's equation,the total energy of 2.3×10¹¹ photons of gamma radiation is 11.7208×10[tex]^-3[/tex] J.
What is Planck's equation?Max Planck discovered the theory which stated that energy is transferred in the form of discrete packs which are called quanta and thus proposed an equation called the Planck's equation which relates energy and frequency of a photon and is given as, E=hcυ or in terms of wavelength it is ,E=hc/λ.
The equation makes use of a constant which is called the Planck's constant and it's value is 6.626×10[tex]^-34[/tex] Js.
In the given problem, the energy is calculated as, E=6.626×10[tex]^-34[/tex]×3×10⁸/3.9×10[tex]^-12[/tex]=5.096×10[tex]^-14[/tex] J.
Thus,for 2.3×10¹¹ photons it is 5.096×10[tex]^-14[/tex] ×2.3×10¹¹ =11.7208×10[tex]^-3[/tex] J.
Learn more about Planck's equation,here:
https://brainly.com/question/5528489
#SPJ1
In a different titration, a solid sample containing some Fe2+ ion weighs 1.705g. It requires 36.44 mL, 0.0244 M KMnO4 to titrate the Fe2+ in the dissolved sample to a pink end point.
a. How many moles MnO4 ion are required?
b. How many moles Fe2+ are there in the sample
c. How many grams of Fe are there in the sample?
d. What is the percent Fe in the sample?
The accurate responses are;
a) Number of moles of permanganate ion = 8.89 * 10^-4 moles
b) Number of moles of iron = 4.4 * 10^-3 moles
c) Mass of iron in the sample = 0.25 g
d) Percentage of iron in the sample = 14.7 %
What is titration?The term titration refers to the kind of reaction in which the amount of substance can be obtained by the accurate determination of the volumes of the substances that have reacted in the process.
a) The number of moles of the permanganate ion that are involved is obtained from;
36.44 /1000 L * 0.0244 M = 8.89 * 10^-4 moles
b) Given that the reaction is 1:5 in the mole ratio of the permanganate ion and the iron III ion
1 mole of permanganate reacts with 5 moles of iron II
8.89 * 10^-4 moles reacts with 8.89 * 10^-4 moles* 5 moles/ 1 mole
= 4.4 * 10^-3 moles
c) Mass of the iron II ion in the sample = 4.4 * 10^-3 moles * 56 g/mol = 0.25 g
d) Percent of the iron in the sample = 0.25 g/1.705g * 100/1
= 14.7 %
Learn more about titration:https://brainly.com/question/2728613
#SPJ1
How many moles are there in 2.50 grams of ethanol, C2H6O ?
3) Water is a polar solvent; gasoline is a non-polar solvent. Which compounds are
more likely to dissolve in water? Check all that apply.
CCI4
NaCI
CH4
Oil
According to given statement NaCI compounds are more likely to dissolve in water.
What is polar solvent with example?Polar solvents, which do have "positive" and "negative" charges at different points throughout their structures, can dissolve other polar compounds. Acetone, methanol, dimethylformamide (DMF), dimethylsulfoxide (DMSO), isopropanol, and ethanol are some other polar solvents. A few of these solvents is water.
Why water is a polar solvent?Due to the uneven distribution of its electron density, water is a polar molecule. This demonstrates that water is indeed a polar molecule because hydrogen and oxygen have different electronegativities. The fact that water can dissolve more chemicals compared to any other liquid makes it known as the "universal solvent."
To know more about Polar solvent visit:
https://brainly.com/question/15185907
#SPJ13
How many Chiral centers are in coibacin B
It is to be noted that Coibacin B has three Chiral Centers. A chiral center is a molecule atom that is bound to four separate chemical species, permitting optical isomerism.
What is Coibacin B?Coibacin B is a natural substance with a substantial anti-inflammatory effect and possible utility in the treatment of leishmaniasis, a parasitic illness.
It should be noted that Leishmaniasis is a parasite infection that may be found in the tropics, subtropics, and southern Europe. It is considered a neglected tropical illness (NTD).
Infection with Leishmania parasites, which are disseminated by the bite of phlebotomine sand flies, causes leishmaniasis.
Learn more about Chiral Centers:
https://brainly.com/question/28095208
#SPJ1
