Answer:
.
Explanation:
Explanation:
Given parameters:
Number of cycles = 10cycles
Time taken = 50s
Unknown:
Period of its rotation = ?
Frequency of its rotation = ?
Solution:
The period of rotation is the time taken time taken for a body to complete a number of rotation;
Period = [tex]\frac{t}{n}[/tex]
t is the time
n is the number of cycles
Period = [tex]\frac{50}{10}[/tex] = 5s
The period is 5s
Now, frequency is the inverse of period;
F = [tex]\frac{1}{period}[/tex] = [tex]\frac{1}{5}[/tex] = 0.2Hz
Problems - Show all work.
1. A carnival ride has a radius of 10.00 m and rotates at a speed of 3.00 m/s. Find the period of one complete revolution.
Given:
r=
v=
Unknown:
T=?
Equation:
v=2*pi*r/T
Answer:
21s
Explanation:
Given parameters;
Radius = 10m
Speed or velocity = 3m/s
Unknown:
Period = ?
Solution:
To solve this problem, use the expression:
v = [tex]\frac{2\pi r}{T}[/tex]
r is the radius
T is the unknown
Input the parameters and solve for T;
3 = [tex]\frac{2 x \pi x 10}{T}[/tex]
62.84 = 3T
T = 21s
What current passes through a 1 kW heater with 25 V across it?
Answer:The voltage V in volts (V) is equal to the current I in amps (A) times the resistance R in ohms (Ω): V (V) = I (A) × R (Ω) The power P in watts (W) is equal to the voltage V in volts (V) times the current I in amps (A): P (W) = V (V) × I (A) AC Ohm's law calculator.
Explanation:
40 ampere current passes through a 1 kW heater with 25 Voltage across it.
What is voltage?The difference in electric potential between two places is known as voltage, often referred to as electric pressure, electric tension, or potential difference. It relates to the amount of labor required to transfer a test charge between two places in a static electric field.
Given that power of the source is 1 kW and voltage is 25 V
current is given as,
Power = Voltage*Current
1kW = 25*Current
Current = 1000/25 = 40 ampere.
40 ampere current passes through a 1 kW heater with 25 Voltage across it.
To learn more about voltage refer to the link:
brainly.com/question/13521443
#SPJ5
Based on details in The Riddle of the Rosetta Stone, which statement best describes Jean-Baptiste Fourier's influence on Jean-François Champollion?
Answer:
hello your question is incomplete below is the missing part of the complete question
which statement best describes Jean-Baptiste Fourier’s influence on Jean-François Champollion? Fourier shared his research about mathematics with Champollion, which aided him in his research. Fourier was the first to introduce Champollion to the hieroglyphs on the Rosetta Stone, which fascinated him. Fourier shared his findings about the Rosetta Stone with Champollion, which helped him in his research. Fourier was the first to introduce Champollion to a variety of languages, which prompted his love of languages.
answer : Fourier was the first to introduce Champollion to a variety of languages, which prompted his love of languages.
Explanation:
Jean-Baptiste Fourier's influence on Jean-Francois Champollion is that Fourier was the first to introduce Champollion to a variety of languages, which prompted his love of languages. also Fourier was a mathematician who pleaded on the behalf of Champollion when he was about to be adopted into the military.
What conclusion can you draw from the information shown in the graph?
O A. Global temperatures are increasing due to human activity.
B. Earth is currently experiencing a period of global warming.
O C. Temperature is the only aspect of climate that is changing.
O D. Global temperatures are increasing due to natural causes.
Answer:
The correct option is;
B. Earth is currently experiencing a period of global warming
Explanation:
From the graph, we have;
1) From 1880 to 1900 the temperature anomaly (°C) averages a few degrees below the average surface temperature
2) The decrease below the average surface temperature is larger from 1900 to 1920
3) The surface temperature rises more steadily from below average to a little above average from 1920 to 1940
4) Between 1940 to 1980, the temperature hovers around the average surface temperature
5) The Earth's surface temperature is more or less steadily increasing from 1960 to present
Therefore, the Earth is experiencing a period of global warming
Which best explains why trees are considered a renewable resource? O They are useful to humans. O They can be replanted. 0 They provide a source of food. They are used to produce heat.
Answer:
They can be replanted.
Explanation:
Renewable sources can be found again and again, similar to how you can plant a tree again to receive food sources and heat production, which in turn is useful to humans.
When The trees are considered a renewable resource because They can be replanted. The correct option is 'B'.
What is a Renewable Resource?
When Renewable sources can be found, again and again, similar to how you can plant a tree again to receive food sources and also heat production, they are in turn useful to humans.
When the renewable resources are resources, generally naturally happening, they can replenish to the rate that they can return the used volume and also be swallowed.
A renewable resource will either produce itself naturally through automatic approaches to that resource or through human interaction and guidance.
Therefore, The correct option is 'B'.
Find more information about Renewable Resource here:
https://brainly.com/question/25389846
Which statement accurately compares the trends in atomic number and atomic mass in the periodic table?
O The atomic number increases from left to right, while the atomic mass increases from right to left.
O The atomic mass increases from left to right, while the atomic number increases from right to left.
O Both the atomic mass and the atomic number increase from left to right.
O Both the atomic mass and the atomic number increase from right to left.
Answer:
C.
That is your answer
When materials absorb heat, the kinetic energy of the particles _________?
a. increases
b. decreases
c. remains the same
Answer:
A
Explanation:
The atoms started to get "overly excited" and started to move faster than they usually do. When this happens, energy is released in the form of heat, light or etc. Because of this, kinetic energy increases and atoms colliding with each other happens more often.
why water molecules are closer together in the liquid state than in the solid state.
Answer:
because of the hydrogen bonds, as water molecules come together they stick to one another for a small, but significant amount of time. This slows them down, and holds them closer to one another. They become a liquid; a different state of matter where the molecules are closer and slower than in a gas.
Answer:
When water is in its solid-state, the water molecules are packed close together preventing it from changing shape.
Explanation:
In general, when considering the states of matter, solids are denser than liquids, and normally liquids are denser than gases.
Hope this helps!
Brain-List?
4. The electric force between electric charges is much larger than the
gravitational forces between charges. Why, then, is the gravitational force
between the Earth and the Moon much larger than the electric force between
them?*
A. The electric force is small in comparison because charges are VERY small but the
gravitational force has to do with the mass of the Earth and Moon.
B. The electric charge is actually greater and the question is false.
C. The phases of the Moon determine the amount of electric and gravitational force.
The electric force is small in comparison because charges are VERY small but the
gravitational force has to do with the mass of the Earth and Moon.
what do you understand by the term current state and define its SI unit.........
Answer:
Explanation:
Current refer to the rate at which electric charge flow or run or move in an electric circuit . It is measured in Ampere or coulumb per second.
The SI unit is Ampere and it is represented by A. It is a scalar quantity.
1 Ampere is the current that will produce an attractive force of 2 × 10^-7 Newton per meter of length between two parallel conductors.
When a cricket ball is thrown vertically upwards, it reaches a maximum height of 15 metres. (a) What was the initial speed of the ball ? (b) How much time is taken by the ball to reach the highest point ? (g=10 ms -2
Answer:
The velocity of the cricket ball is 17.32 m/s
Time is taken by the ball to reach the highest point = 0.8660 seconds
Explanation:
The cricket ball can be seen and treated as a projectile in this case
The maximum height attained by a projectile in motion can be calculated using the formula:
[tex]h = \frac{v^2 sin^2 \theta }{2g}[/tex]
In any projectile problem, once we know see that the object was released vertically upwards, we need to know that this means that the angle of projection is 90 degrees, and sin 90 is = 1
hence, h will be modified to become
[tex]h = \frac{v^2 }{2g}[/tex]
[tex]v = \sqrt{2gh}[/tex]
We are given that h = 15m and g = 10m/s2
[tex]v = \sqrt{2 \times 10 \times 15} = 17.32m/s[/tex]
The velocity of the cricket ball is 17.32 m/s
B. We can get the time it took to reach the highest point by dividing
time = distance/speed
Time = 15/17.32 = 0.8660 seconds
what happens to homeostasis as we get older?
Explanation:
Mark above as brainliest answerWhat causes the electrons to move in the “Electromagnetic Induction” animation?
a.
Current
c.
Changes in magnetic field
b.
Voltage
d.
Kinetic energy
Please select the best answer from the choices provided
A
B
C
D
Answer:
Change in the magnetic field
4. A chandelier brightens a ballroom after a waiter moves a switch
Answer:
because switch moves after a waiter
Explanation:
in physics, the use of force to move an object is called
Answer:
In physics, work means the use of force to move an object. ... Not all force that is used to move an object does work. For work to be done, the force must be applied in the same direction that the object moves
The use of force to move an object is called Work.
A force can change the motion of an object. A force causes an object with mass to change its velocity (acceleration).
[tex]\bold{Force = Mass\times acceleration}[/tex]
while work is the result of the action when a force causes an object to move in the direction of the force.
[tex]\bold{Work= Force\times Displacement}[/tex]
Therefore, the use of force to move an object is called Work.
To know more visit:
https://brainly.com/question/4095205
Write down the factors on which moment depends upon ?
Answer:
The size of a forceThe perpendicular distance from the pivot the line of action of forceExplanation:
Factors that affect the moment of a force are;
The size of a forceThe perpendicular distance from the pivot the line of action of forceThe magnitude of force applied is directly proportional to the moment of force in that for a perpendicular distance d, increased in force applied will result to a higher moment of force. When the perpendicular distance from the pivot is decreased while the force applied remains constant, the moment of force decreases.
Transfer of charge by touching is called... induction or conduction?
Answer:
Transfer of charge by touching is called conduction.
Which of the following is not a shared similarity between warm-up and cool-
down routines?
A. Stretches performed can be the same.
B. Consist of a modified version of the exercise performed, such as a
slow jog before or after a strenuous run.
C. Restore muscles to their resting length.
D. Help prevent injury.
C. Restore muscles to their resting length
Hope this helps:)
What is the average speed of this car over the entire journey ?
Answer: 0.83333333333 km/h
Explanation: give brainliest
Which type of force is a noncontact force?
Answer:The answer is C: any fundamental force
Explanation:
A P E X
Suppose that two objects attract each other with a gravitational force of 16 units. If the mass of both objects was tripled, and if the distance between the objects was doubled, then what would be the new force of attraction between the two objects?
Answer:
The new force of attraction would be 36 units
Explanation:
Law of Universal Gravitation
Objects attract each other with a force that is proportional to their masses and inversely proportional to the square of the distance.
This statement can be expressed with the formula:
[tex]\displaystyle F=G{\frac {m_{1}m_{2}}{r^{2}}}[/tex]
Where:
m1 = mass of object 1
m2 = mass of object 2
r = distance between the objects' center of masses
G = gravitational constant: [tex]6.67\cdot 10^{-11}~Nw*m^2/Kg^2[/tex]
Now suppose two given objects attract with a force of F=16 units, thus:
[tex]\displaystyle G{\frac {m_{1}m_{2}}{r^{2}}}=16[/tex]
And now the masses of both objects is tripled, i.e., m1'=3m1, m2'=3m2, and the distance between them is doubled, r'=2r. The new force is:
[tex]\displaystyle F'=G{\frac {3m_{1}3m_{2}}{(2r)^{2}}}[/tex]
Operating:
[tex]\displaystyle F'=G{\frac {9m_{1}m_{2}}{4r^{2}}}[/tex]
[tex]\displaystyle F'=\frac{9}{4}G{\frac {m_{1}m_{2}}{r^{2}}}[/tex]
Substituting the value of the initial force:
[tex]\displaystyle F'=\frac{9}{4}\cdot 16[/tex]
[tex]F'=36\ units[/tex]
The new force of attraction would be 36 units
PLEASE HELP
OPTIONS:
Bar one:
Constant acceleration
Constant velocity
Positive acceleration
Bar two:
Remains stationary
Slows down
Speeds up
Bar three:
Constant acceleration
Constant velocity
Positive acceleration
Answer:
bar one:constant acceleration
bar two:remains stationary
bar three:constant acceleration
Visible light is the _______ that our eyes can see.
Answer:
Spectrum because it could respond to a specific color based upon how you humans typically perceive Lights of the wavelength
Answer:
spectrum
Explanation:
Energy that depends upon object mass and object height.
Answer:
That is Gravitational potential energy.
What is the speed of a wave that has a frequency of 220 Hz and a wavelength of 0.39 m
Answer:
85.8 m/s
Explanation:
speed=wavelength multiply by frequency
[tex]0.39 \times 220 [/tex]
[tex]85.8[/tex]
You shine light on a material. 50% of it is reflected by the surface. A further 10% of the original light is absorbed by the material. What is the transmittance of the material?
Answer: T = 40%
Explanation: The definition of Transmittance is a part of the incident light that passes through a surface or material moves through the other side of the surface. It is represented as T and is defined as the ratio of the intensity of incident light to the intensity of light that passes through the surface:
[tex]T=\frac{I}{I_{0}}[/tex]
where
I is intensity that passes through
I₀ is incident intensity
When you shine a light on a material and 50% of it is reflected, the remaining 50% will try to pass through. However, 10% is absorbed leaving 40% of the light to move through the other side of the surface.
So, Transmittance of this surface is 40%.
What element has conductivity,shiney luster,magnitic
-science
Answer:
The answer to this question is given below in this explanation section.
Explanation:
"What element has conductivity,shiney luster,magnetic
-science"
silicon has a shiny luster,But it is brittle and conducts electricity poorly.Some metalloids change their characteristics when they react with different elements.Luster conductivity and malleability are physical properties can be observed be observed without attempting to change the identity of the substance.The term physical property is an observable characteristics of a substance. in this case the luster conductivity and malleability of metals are the properties, which can be observed by our senses.It differs from chemical properties which can only be observed when the substance change its chemical identity.
Metal are solid at room temperature with the exception of mercury which is liquid at room temperature.Luster metal have the quality of reflection light from its surface and can be polished e.g gold,silver and copper.
If you and your friend are playing tug of war and both are you are pulling with the same amount of force. What will happen?
Answer:
Nothin will move, it will stay the same since no force is greater than the other. it's "the same amount of force" which also means an equal amount of force
Explanation:
The forces are only equal if there is no acceleration (which in the game of tug of war, accelerating yourself and your opponent is the idea). If the force on the rope and the ground are both equal either nothing moves or some other force is being applied in the system.
Hope this helped!
A Force that does not change an object velocity
Answer:
I think ur wrong to say force doesn't change an object velocity
Explanation:
Force affects how objects move. They change the direction of motion of an object that is already moving. Since force causes a change in the speed or direction of an object, we may say that force causes changes in an object velocity.
In an open circuit ____________.
Question 34 options:
a light bulb would produce light
current will flow
current will not flow
more than one resistor is in the circuit
a resistor controls the flow of current
Answer:
The current will not flow
Explanation:
An open circuit is a circuit that is not complete it has an opening Therfor the current can not flow.
