The mass of calcium fluoride recovered at the end of the reaction is 31.14 g.
What is reaction?Reaction is the response to a stimulus, either physical or mental.
The balanced equation for the reaction between calcium silicate and hydrofluoric acid is as follows:
CaSiO3 + 2 HF → CaF2 + SiF4 + H2O
We can use the given masses of calcium silicate and hydrofluoric acid to calculate the mass of calcium fluoride formed at the end of the reaction. As we can see from the equation, 2 mol of HF are required for every 1 mol of CaSiO3. Thus, the number of moles of HF present is equal to half the number of moles of CaSiO3.
The number of moles of CaSiO3 present can be calculated by dividing the given mass of CaSiO3 (25.2 g) by the molar mass of CaSiO3 (136.14 g/mol). This gives us a value of 0.185 mol of CaSiO3.
Since the number of moles of HF present is half the number of moles of CaSiO3, the number of moles of HF present is 0.0925 mol. We can calculate the mass of HF present by multiplying the number of moles of HF (0.0925 mol) by the molar mass of HF (20.01 g/mol). This gives us a value of 1.85 g of HF.
Since the given mass of HF (16.0 g) is greater than the calculated mass of HF (1.85 g), it means that there is excess HF present in the reaction. The excess HF present will result in more calcium fluoride being formed in the reaction.
To calculate the mass of calcium fluoride formed in the reaction, we need to calculate the number of moles of calcium fluoride formed. We can do this by dividing the mass of HF present (16.0 g) by the molar mass of HF (20.01 g/mol). This gives us a value of 0.799 mol of HF. Since 2 mol of HF are required for every 1 mol of CaSiO3, the number of moles of CaF2 present is 0.799/2 = 0.3995 mol.
We can now calculate the mass of calcium fluoride formed by multiplying the number of moles of CaF2 (0.3995 mol) by the molar mass of CaF2 (78.00 g/mol). This gives us a value of 31.14 g of CaF2.
Thus, the mass of calcium fluoride recovered at the end of the reaction is 31.14 g.
To learn more about reaction
https://brainly.com/question/25769000
#SPJ4
Which of the following correctly compares the radii of Na and Na+?
Na has a smaller radius than Na+ because Na has expanded its electron cloud.
Na has a larger radius than Na+ because Na has lost its outermost energy shell.
Na has a smaller radius than Na+ because Na+ has expanded its electron cloud.
Na has a larger radius than Na+ because Na+ has lost its outermost energy shell.
The statement that correctly compares the radii of Na and Na+ is as follows: Na has a larger radius than Na+ because Na+ has lost its outermost energy shell (option D).
What is atomic and ionic radius?The ionic radius is the distance from the nucleus to the outermost electrons in an ion while the atomic radius is the distance from the center of the nucleus to the outermost shell of an atom.
In a neutral atom, the atomic and ionic radius are the same, however, if the atom loses its outermost electron (positively charged or cation), the ionic radius is smaller than the atomic radius because the atom loses an electron energy shell.
Considering Na and Na+, it can be said that Na+ has lost its outermost energy shell because it is positively charged, hence, will possess a smaller radius than Na atom.
Learn more about atomic radius at: https://brainly.com/question/29440273
#SPJ1
Describing Intermolecular Forces
Which of the intermolecular forces below occurs
between polar molecules?
-dipole-dipole interactions
-London dispersion forces
-hydrogen bonding
-Van der Waals forces
Answer:
A) dipole-dipole interactions
Explanation:
edge 2023
Williamson synthesis of 1-isopropoxy-1-methylcyclopentane. O Williamson ether synthesis would give a poor yield of product as the product does not have Markovnikov orientation.O Williamson ether synthesis would give a poor yield of product as the product does not have anti-Markovnikov orientation. O Williamson ether synthesis would give a poor yield of product as the halide is on a 3º carbon.O Williamson ether synthesis would give a poor yield of product as the halide is on a 2° carbon.
Williamson ether synthesis would give a poor yield of product as the halide is on a 2° carbon. is true about the synthesis of 1-isopropoxy-1-methylcyclopentane.
The Williamson ether synthesis is a method for the synthesis of ethers using an alcohol and an alkyl halide. The reaction proceeds through a nucleophilic substitution mechanism and the ether product is obtained with the alcohol and halide groups in the anti-Markovnikov orientation. The reactivity of the alkyl halides used in this reaction follows the order: primary > secondary >> tertiary. Therefore, the reaction of a secondary halide such as 2° carbon halide will give a poor yield of product as the reactivity of 2° carbon halide is less compared to primary halide. As a result, the reaction is less efficient and the yield of the product is lower.
To know more about Williamson ether synthesis click below:
https://brainly.com/question/29434473#
#SPJ4
What is the chemical name of the covalent compound p4s3?
The chemical name of the covalent compound P₄S₃ is Phosphorus sesquisulfide.
When free of yellow and white phosphorus, phosphorus sesquisulfide manifests as a yellow crystalline solid. frictional ignition is simple. during burning, produces phosphorus pentoxide and Sulphur dioxide. produces phosphoric acid, a caustic substance, when it reacts with water. used in the production of other compounds as well as the matchmaking process. The inorganic chemical Phosphorus Sesquisulfide has the formula P₄S₃. It was created in 1898 as part of Henri Sevene and Emile David Cahen's creation of friction matches without the dangers of white phosphorus.
Hence, covalent compound are formed from bond without loss or gain of electron.
To know more about Compound.
https://brainly.com/question/13516179
#SPJ4
The chemical name for the given compound P4S3 is phosphorous sesquisulfide
Tetraphosphate trisulfide is the IUPAC name for P4S3. It can be quickly identified by counting the phosphorous and sulphur atoms in the mixture and usually yellow in colour and solid compound.
Trisulfurated phosphorus, phosphorous sesquisulfide, and tetraphosphorus trisulfide are just a few of its many alternate names.
The bond formed between the phosphorous and sulphur in phosphorous sesquisulfide are derivatives of a tetrahedral bond.
It has a 220.075 g/mol molar mass.
To learn more about phosphorus click here:
https://brainly.com/question/15710324
#SPJ4
the temperature and pressure at which a substance can exist in equilibrium between its solid, liquid, and gaseous states is called its ____________.
The temperature and pressure at which a substance can exist in equilibrium between its solid, liquid and gaseous states is called its triple point.
Triple point of a substance is defined as the the temperature and pressure at which three phases of that substance may coexist in thermodynamic equilibrium. At triple point of the temperature and pressure at which the sublimation curve, fusion curve and the vaporization curve meet at a point. A triple point may involve more than one solid phase for substances with multiple polymorphs. For most substances the triple point is the minimum temperature at which the liquid can exist.
To learn more about Triple point please visit:
https://brainly.com/question/2402164
#SPJ4
Predict the products of the following reaction. If no reaction will occur, use the NO REACTION button. Be sure your chemical equation is balanced! CH,CHCH,OH (1) + O2(g) → 0 Read MON O X 0-0 5
No reaction (NR): A circumstance in which mixing of reactants causes no change in molecular structure.
What reaction is no reaction?We employ the (s) label with a compound when it is not soluble and assume that it will precipitate out of solution. No reaction will be expected if everything is solvable.
We need to understand the types of ionic compounds that create precipitates in order to determine whether double-replacement reactions will take place. In order to do this, we employ solubility principles, which are broad generalisations that foretell which ionic compounds will dissolve (be soluble) and which will not (are not soluble or insoluble).
A few general solubility rules are listed in Table 4.3.1, "Some Useful Solubility Rules." The solubility laws must be taken into account while analysing any ionic molecule (both the potential products and the reactants). We use the (aq) label with a substance if it is soluble to show that it dissolves.
To learn more about no reaction refer to:
https://brainly.com/question/26505550
#SPJ4
if the fourth shell (the n = 4 energy level) were shown, how many subshells would it contain?
The fourth energy level, or shell, would contain four subshells, designated s, p, d, and f.
What are subshells?
A subshell is a set of atomic orbitals with the same value of the angular momentum quantum number (l) and the same magnetic quantum number (m_l). Subshells are characterized by the letter s, p, d, f, etc., which corresponds to the value of l.
The fourth energy level, or shell, would contain four subshells, designated s, p, d, and f. The number of subshells in a given energy level is determined by the value of the principal quantum number (n).
Each subshell is designated by a letter, s, p, d, f, etc., which corresponds to the angular momentum quantum number (l). The value of l can be used to determine the number of subshells in a given energy level.
For example, l = 0 corresponds to an s subshell, l = 1 corresponds to a p subshell, l = 2 corresponds to a d subshell, and l = 3 corresponds to an f subshell. The principal quantum number of 4 shell is 4, so the value of l can be 0,1,2,3. Hence it contains 4 subshells.
Hence, the fourth energy level, or shell, would contain four subshells, designated s, p, d, and f.
To learn more about subshells from the given link:
https://brainly.com/question/28765634
#SPJ4
Solids have a __________ shape and are not appreciably __________. A) definite, compressible B) definite, incompressible C) indefinite, compressible D) indefinite, incompressible E) sharp, convertible.
Solids have a definite shape and are not appreciably compressible. The option (a).
The characteristics of solids can be fixed shape and a fixed volume. Solids are negligibly compressed. Solids have high density. Force of attraction between the particles is very strong. The space between the particles of solids is negligible. They have strong intermolecular forces, particles vibrate in place, it has low kinetic energy (KE), it has definite shape. I has definite volume and is incompressible. It has high density (as compared to same substance as a liquid or gas), low rate of diffusion (millions of times slower than in liquids).
Learn more about solids:
brainly.com/question/20461295
#SPJ4
Draw Lewis structure for CN+, CN, and CN-
In CN-, there are only two atoms forming triple bonds with each other. Both these atoms have a single lone pair of electrons
What is Lewis tructure?
Bond order of CN- is 3, It is Diamagnetic in nature, since it does not have any unpaired electrons.The cyanide ion formula is CN–. That gives us ten valence electrons in total to work with.For cyanide the carbon contributes four valence electrons and the nitrogen contributes five (plus the additional electron for the negative charge). In the final ion though, the carbon and nitrogen are sharing collectively six electrons in a triple bond which ultimately came from both atoms. Hope that helps.A carbon–nitrogen bond is a covalent bond between carbon and nitrogen and is one of the most abundant bonds in organic chemistry and biochemistry. Nitrogen has five valence electrons and in simple amines it is trivalent, with the two remaining electrons forming a lone pair.To learn more about lewis structure refers to:
https://brainly.com/question/24777008
#SPJ4
Ionic bonding is expected in which of these compounds? A) Cl2 B) KF C) OF2 D) HF E) H2
Ionic bonding is expected in KF and HF.
There are two different kinds of chemical compounds: covalent compounds and ionic compounds. Covalent compounds are created when an electron is shared, whereas ionic compounds are created when an electron is completely transferred.
A mixture of a metal and a nonmetal is an ionic compound. Ionic compounds are extremely tough. Because of the strong ion connection, they have high melting and boiling points. Electrostatic attraction between ions with opposing charges in a chemical molecule creates an ionic bond, also known as an electrovalent bond.
In KF and HF, ionic bonding is anticipated. H₂O has polar covalent bonds. Cl has a nonpolar covalent bond.
To learn more about Ionic bond at, here:
https://brainly.com/question/15937614
#SPJ4
Question 1: Is it always possible to recycle and reuse materials?
a) Yes, because atoms cannot be destroyed in a chemical reaction.
b) Yes, because atoms can only be rearranged in a chemical reaction.
c) No, because atoms can be changed into other kinds of atoms.
d) No, because the atoms may be spread so thinly that it would take too much time, energy and money to collect them and bring them back together.
Question 2: Which one of the following statements is an incorrect statement of the Law of Conservation of Mass?
a) The mass of a system is dependent upon chemical reactions that may occur.
b) The mass of a system is conserved in a chemical reaction.
c) Matter cannot be created or destroyed.
d){ Atoms are conserved in chemical reactions.
Question 3: When a gaseous sample experiences an increase in temperature, which of the following is a correct description of what will occur?
a) The volume of the sample will increase.
b) The mass of the sample will remain constant.
c) The density of the sample will decrease.
d) All of the above will occur.
e) None of the above will occur.
Question 4: The known density of a specific type of steel is 8.10 g/cm3. What is the mass of a 1.26 L volume of this type of steel?
a) 10,206 g
b) 10.206 g
c) 102.06 g
d) None of these
Question 5: Considering the location of gallium on the periodic table, which is the best description of this element?
a) A main group element which is nonmetallic and has 3 valence electrons.
b) A transition element which is metallic and has 3 valence electrons.
c) A main group element which is metallic and has 3 valence electrons
d) A transition element which is metallic and has 4 valence electrons.
e) None of these are accurate descriptions.
1. d) No, because the atoms may be spread so thinly that it would take too much time, energy and money to collect them and bring them back together.
2. a) The mass of a system is dependent upon chemical reactions that may occur.
3. d) All of the above will occur.
4. a) 10,206 g
5. c) A main group element which is metallic and has 3 valence electrons.
what is law of conservation of mass?According to the principle of mass conservation, neither chemical processes nor physical changes can create or destroy mass in an isolated system. The mass of the products and reactants of a chemical reaction must be equal, in accordance with the law of conservation of mass.
A gas's density drops as its volume expands and its density rises due to an increase in the intermolecular distance between its molecules when temperature rises.
formula for calculating mass of steel,
m = pV
m = 8.10g/cm^3 × 1260cm^3 = 10,206 g.
To learn more about law of conservation of mass visit,
https://brainly.com/question/28711001
#SPJ4
the half-life of iodine-131 is 8.02 days. how long will it take for 80.% of the sample to decay?
The half-life of iodine-131 is 8.02 and it will take 19days for 80% of the sample to decay.
What is Exponential Decaying?The exponentially decaying formula describes how quickly a substance degrades. The radioactive material's half-life, or the amount of time it takes for 50 per cent of the material to decay, and the total starting amount of material are both factors.
All radioactive decay follows 1st order of kinetics,
A = Ao × exp(-kt)
where k is decay constant.
if 80% decays then there will be only 20% leftover.
A =Ao/5
t2= 8.02 days
k = ln2/t2
A = Ao/5 = Ao× exp(-kt)
1/5 = exp(-kt)
ln(1/5) = -kt
-1.609 = -kt
t = 1.609/k
t = 1.609 × t2/ln2
t = 1.609 × 8.02/ 0.693
t = 19 days
To learn more about decaying visit,
https://brainly.com/question/23478882
#SPJ4
(1) What is the element with an electron configuration of 1s22s22p63s23p64s23d6?
(2) What is the element with an electron configuration of 1s22s22p63s23p6?
(3) What is the name of the element with a valence electron configuration of 4s1?
(4) What is the name of the element with a valence electron configuration of 2s22p5?
A. An element with the valence electron configuration 3s1 would form a monatomic ion with a charge of .
In order to form this ion, the element will (lose or gain) (1/2/3/4/5/6/7/8) electron(s) from/into the ( s/p/d/f/ s + p /s + d/ p + d) subshell(s).
B. An element with the valence electron configuration 3s23p3 would form a monatomic ion with a charge of .
In order to form this ion, the element will (lose or gain) (1/2/3/4/5/6/7/8) electron(s) from/into the( s/p/d/f/ s + p /s + d/ p + d) subshell(s).
(1) The element with an electron configuration of 1s22s22p63s23p64s23d6 is Iron (Fe).
The above electronic configuration is the repesentation of the electrons presents in different orbitals of the iron(Fe) .we have seen that all orbitals is completely filled before D orbital.
(2) The element with an electron configuration of 1s22s22p63s23p6 is Argon (Ar)
The above electronic configuration is the repesentation of the electrons presents in different orbitals of the Argon(Ar) .we have seen that all orbitals is completely filled.
(3) The name of the element with a valence electron configuration of 4s1 is Potassium (K)
The above electronic configuration is the repesentation of the electrons presents in different orbitals of thePotassium (K) .we have seen that all orbitals is completely filled before 4s1.
(4) The name of the element with a valence electron configuration of 2s22p5 is Flourine (F)
The above electronic configuration is the repesentation of the electrons presents in different orbitals of the Flourine (F) .we have seen that all orbitals is completely filled before 2p5.
A. An element with the valence electron configuration 3s1 would form a monatomic ion with a charge of +1. In order to form this ion, the element will lose one electron from the 3s subshell.
B. An element with the valence electron configuration 3s23p3 would form a triatomic ion with a charge of -3. In order to form this ion, the element will gain three electrons from the 3s and 3p subshells.
Elements achieve an inert gas configuration by gaining or losing electrons to attain a full valence shell of electrons, resulting in a stable electron configuration. This is also known as having a complete octet in their outermost energy level.
To know more about valence electron click below:
https://brainly.com/question/28977387#
#SPJ4
substances that are formed during a chemical reaction are called
Chemical reaction occurs when one or more substances interact with each other to create products. The substances that react with each other is called reactants and the substance formed as a result is called products.
Two or more substances react to form one ore more substances. This process is a chemical reaction. The substances which goes into the reaction is reactants, and those we get as a result is the products. A chemical reaction is depicted as follows
A+ B → C+D
A and B are the reactants and C and D are the products. Reactants are on the left hand side of the arrow and products are usually shown on the right hand side.
For further details regarding a Chemical reaction, kindly refer
https://brainly.com/question/29762834
#SPJ4
Of the following, only ________ is a valid unit for reaction rate. Of the following, only ________ is a valid unit for reaction rate. Of the following, only ________ is a valid unit for reaction rate.
mL/g
mol/mL
L/atm
mol/mol
g/s
Reaction rate is typically expressed as a change in concentration over a period of time, such as moles per liter per second (mol/L s). mL/g, L/atm, and g/s are not valid units for reaction rate.
Reaction rate is the speed at which a chemical reaction occurs, measured by monitoring the changes in concentration over a period of time. It is typically expressed as a change in concentration over a period of time, such as moles per liter per second (mol/L s). Among the choices listed, only mol/mL is a valid unit for reaction rate. mL/g, L/atm, and g/s are not valid units for reaction rate, since they do not denote a change in concentration over a period of time. To properly measure reaction rate, one must measure the rate of change in the concentration of the reactants and products over a period of time. Understanding the reaction rate can help to identify the mechanism of a reaction and how it can be optimized for a specific purpose.
learn more about reaction rate here
https://brainly.com/question/8592296
#SPJ4
What is the approximate pH of a 0.10 M solution of a weak acid that has a Ka of 5 x10^-5 M?
a. 2.7
b. 5.3
c. 4.8
d. 11.3
The approximate pH of a 0.10 M solution of a weak acid with a Ka of 5x10-5 M is 4.8.
To calculate the approximate pH of a weak acid solution, we can use the Henderson-Hasselbalch equation, which states that pH = pKa + log([A-]/[HA]).
In this equation, [A-] is the concentration of the conjugate base and [HA] is the concentration of the weak acid. In this case, [HA] is 0.10 M and [A-] is 5x10-5 M.
Calculate the molarity of the weak acid:
Molarity = 0.10 m (given)
Calculate the Ka of the weak acid:
Ka = 5 x 10-5 m (given)
Calculate the concentration of the conjugate base:
Conjugate base concentration = Ka x molarity = 5 x 10-5 m x 0.10 m = 5 x 10-6 m.
Calculate the pH of the solution:
pH = -log[conjugate base] = -log(5 x 10-6) = 4.8
Learn more about pH:
brainly.com/question/15289741
#SPJ4
a red-orange solid with a melting point of 1085 °C that cannot be broken down into simpler substances by chemical processes
Answer:
Copper is an element which has a red-orange colour and is solid at room temperature. It has a melting point of 1085 °C, and it cannot be broken into simpler substances by chemical processes. It cannot be broken down as copper is an element which is made up of only one type of atom. Atoms are the smallest particles of matter, and there is nothing further than that.
One mole of an ideal gas does 3000 j of work on its surroundings as it expands isothermally to a final pressure of 1. 00 atm and volume of 25. 0 l. Determine the initial volume of the gas.
When 3000 joule work done on one mole of ideal gas isothermally the initial volume becomes 0.00765 m³.
An isothermal process, or one that occurs at a constant temperature, measures the work done on an ideal gas by
Work done w = 3000 joules
Pressure P = 1 atm = 1.013 x 105 N/m²
The final volume of the gas = 25 L = 25 x 10⁻³ m
w = n x P x V x ln(V₂/V₁)
3000J = 1 x ( 1.013 x 105 N/m² ) x ( 25 x 10⁻³ m³ ) x ln(0.025/V₂)
V₂= 0.00765 m³ of ideal gas in a container
Hence, the final volume of gas is more than the initial volume.
To know more about Ideal gas.
https://brainly.com/question/28257995
#SPJ4
The initial volume of the gas would be 0.00765m³ when one mole of an ideal gas does 3000 j of work on its surroundings as it expands isothermally.
An isothermal process is a chemical or physical process during which the the temperature of the system remains constant while the transfer of heat from the system occurs so slowly that equilibrium state of system is maintained throughout.
The work done by ideal gas for an isothermal process is given by -
W = -nrt ln (vf/vi) = - [tex]P_{f} V_{f}[/tex] ln (vf / vi)
Thus
Vi = Vf exp (W / + Pf Vf )
(0.0250)exp [ -3000 / 0.0250(1.013 × [tex]10^{5}[/tex])]
= 0.00765m³
To learn more about isothermal process click here:
https://brainly.com/question/12023162
#SPJ4
Write a skeleton equation for the following reaction: A piece of calcium metal is placed into a solution of copper(II) nitrate. A reaction occurs, forming calcium nitrate and copper metal.
skeleton equation for A piece of calcium metal is placed into a solution of copper(II) nitrate
CaCo3(s)---> CaO(s) + CO2 (g)
Ca stands for calcium metal, Cu(NO3)2 for copper(II) nitrate, Ca(NO3)2 for calcium nitrate, and Cu stands for copper metal in this equation. The arrow denotes the direction of a reaction between copper(II) nitrate and calcium metal, which results in the formation of calcium nitrate and copper metal. The particular amounts of the products and reactants required are not specified in this equation, which illustrates the overall form of the reaction. The coefficient associated with the products and reactants must be changed to ensure that each element has the equal amount of atoms on both sides of the arrow in order to create a balanced chemical equation.
To learn more about copper(II) nitrate here:
https://brainly.com/question/15306252
#SPJ4
The following skeleton equation represents the chemical reaction that occurs when a piece of calcium metal is placed into a solution of copper(II) nitrate, forming calcium nitrate and copper metal:
[tex]Ca(s) + Cu(NO_3)_2 (aq) - > Ca(NO_3)_2 (aq) + Cu (s)[/tex]
In this reaction, the calcium metal (Ca) and copper(II) nitrate [tex]Cu(NO_3)_2(aq)[/tex] react to form the products calcium nitrate [tex]Ca(NO_3)_2[/tex] and copper metal (Cu). The calcium and copper(II) nitrate are both in their elemental states, with the calcium being a solid (s) and the copper(II) nitrate being aqueous (aq), or dissolved in water. The calcium nitrate and copper metal that are produced as the result of the reaction are also both in their elemental states, with the calcium nitrate being aqueous and the copper metal being a solid. This chemical reaction is an example of a double displacement reaction, in which the positive ions, or cations, of the reactants switch places to form the products.
To know more about chemical reaction click below:
https://brainly.com/question/29039149#
#SPJ4
the ribonucleotide polymer (5')gtgatcaagc(3') could only form a double-stranded structure with:
The polymer of amino acid give different types of proteins. Poly means many. Therefore, the ribonucleotide polymer (5')GTGATCAAGC(3') could only form a double-stranded structure with: (5')GCTTGATCAC(3').
What is polymerA polymer is a substance or material consisting of very large molecules called macromolecules, composed of many repeating subunits. The repeating subunit is called monomer. Monomer can be of same type or different type.
The linkage between units of amino acid is called peptide linkage or peptide bond. The ribonucleotide polymer (5')GTGATCAAGC(3') could only form a double-stranded structure with: (5')GCTTGATCAC(3').
Therefore, the ribonucleotide polymer (5')GTGATCAAGC(3') could only form a double-stranded structure with: (5')GCTTGATCAC(3').
To know more about polymer, here:
https://brainly.com/question/1443134
#SPJ1
Suppose you are given a solution with 8.157 M sodium chloride dissolved in water. What volume, in mL, must you dilute to prepare a solution with a molar concentration of 2.733 M and a volume of 62.303 mL?
The concentration terms are molality, normality and mole fraction. Molarity can be used to find out the ionic strength of any solution. Therefore, volume of 8.157 M diluted solution of sodium chloride is 20.89ml.
What is molarity?
Molarity can be calculated by dividing number of moles of solute by volume of solution in litre. Molarity is affected by temperature. Its unit is mole/liter. It measure the concentration of any solute in a solution.
Mathematically,
According to the neutralization law,
M₁V₁=M₂V₂
where,
M₁ = molarity of stock solution = 1 M
V₁ = volume of stock solution = 250ml
M₂ = molarity of dilute solution =3M
V₂ = volume of dilute solution = ?
substituting all the given values we get
M₁V₁=M₂V₂
2.733 M×62.303 mL=8.157 M ×V₂
V₂=20.89ml
Therefore, volume of 8.157 M diluted solution of sodium chloride is 20.89ml.
Learn more about Molarity, here:
https://brainly.com/question/16727614
#SPJ1
CH3COCH3 Draw the Lewis dot structure for CH3COCH3. Include all hydrogen atoms and nonbonding electrons
The drawing of the Lewis dot structure for CH₃OCH₃ or acetone is drawn in the image attached below.
The Lewis dot structure for CH3COCH3 (acetone) is a way to represent the atoms and their bonding in the molecule using dots (electrons) around the symbol of the atom.
Each dot represents an electron. The Lewis dot structure shows that the 3 carbon atoms are double-bonded to one oxygen atom each and single-bonded to 3 hydrogen atoms each. Two oxygen atoms are each sharing two electrons with the carbon atoms. There are non-bonding electrons or lone pairs on the oxygen atoms. The Lewis dot structure gives a rough idea of the bonding in a molecule but it doesn't give information about the 3D geometry of the molecule.
To learn more about the Lewis dot structure visit: https://brainly.com/question/20300458
#SPJ4
Please help
What state of matter exists in area C?
Matter are anything that is made up of atoms. The quantity of matter can be observed only on the basis of mass and volume calculation. Therefore, the correct option is option B.
What is matter?Matter is a substance that has some mass and can occupy some volume. The matter is mainly used in science. Matter can be solid, liquid or gas.
Matter is anything that is made up of atoms. Anything around us that can be physically seen and touched are matter. Ice, water and water vapors are example of matter.
So as we saw that matter has some mass so mass can be measured in gram only. Mass can also be represented as number of molecules. We also saw that matter occupy some volume and that volume is measured only in liter. In the given phase diagram, region C represents gas phase.
Therefore, the correct option is option B.
To learn more about matter, here:
https://brainly.com/question/4562319
#SPJ1
Answer:
gas
Explanation:
(1) What is the element with an electron configuration of 1s22s22p63s23p64s23d3?
(2) What is the element with an electron configuration of 1s22s22p1?
The first element whose atomic number is 23 is Vanadium and the second element whose atomic number is 5 is Boron. Based on electronic configuration.
Keep in mind that the number of electrons in a neutral atom must match the atomic number. The result of adding up all the electrons in the specified arrangement is
The atomic mass of Vanadium, a transition metal in the fourth row, group 5 of the periodic table, is 23, which is the same as the atomic mass of the atom you're looking for, with which it shares a similarity.
The precise configuration of negatively charged electrons at various energy levels surrounding atomic nuclei is known as electron configuration.
Bonds tying various atoms in a molecule together can also be represented by electron configuration.
Learn more about electronic configuration from given link
brainly.com/question/26084288
#SPJ4
a storage device or medium is ____ if it holds data without loss over long periods.
A storage device or medium is durable if it is able to withstand wear and tear, extreme temperatures, and other harsh conditions without losing any data during that time. This means that the data stored on such a device would remain intact over long periods.
A storage device or medium is said to be durable if it is able to withstand wear and tear, extreme temperatures, and other harsh conditions without losing any data. This means that the data stored on such a device would remain intact over prolonged periods of time, ensuring that the data is not lost or corrupted. Durability is a key characteristic of any storage device or medium, as it ensures data is safe and secure for a long period of time. Durable storage devices or media are built with the highest quality materials and are designed to withstand a variety of conditions, ensuring that stored data remains unchanged over time. Durability is especially important for businesses and organizations that rely on data storage to ensure their operations are running smoothly, as they need to be sure that their data is not lost or corrupted over time.
learn more about durable here
https://brainly.com/question/17733902
#SPJ4
at about ph 7 in most cells, what happens to the carboxyl r-group on an amino acid?
Carboxyl r- group on an amino acid act as an acid and loses a proton, giving it a negative charge at ph7.
If an acid with a lower than 7(like a carboxylic acid) is dissolved in such a result, it's the stronger acid and will transfer a proton to the result and come the carboxylate ion. therefore, when the pH is maintained at 7, carboxylic acids are ionized.
At pH (about 7 –7.4), the free amino acids live largely as dipolar ions. (German for “mongrel ions”; a zwitterion carries an equal number of appreciatively and negatively charged groups).
Learn more about amino acid visit:
brainly.com/question/12730073
#SPJ4
Decide whether each molecule or polyatomic ion is polar or nonpolar. If the molecule or polyatomic ion is polar, write the chemical symbol of the atom closest to the negative side. For example, if the molecule were HCI and you decided the hydrogen atom was closest to the negative side of the molecule, you'd enter "H" in the last column of the table.atom closest to negative side molecule or polar or polyatomic lon nonpolar? Сн, Р DO nonpol polo CHO nopole polet non X 5 ?
Write the chemical character of something like the atom nearest toward the negative side is if molecule or triatomic ion is polar. If the compound were HCl, for instance, and you.
Describe a polyatomic atom?Ionic ions are ions made up of several atoms. One nucleophile and three oxygen atoms, for instance, are present in the nitrate ion, NO3-. A polyatomic ion's constituent atoms are typically covalently bound to one another, remaining as a single, point charge as a result.
What are the polyatomic elements?A chemical element with more than three of the same atoms in a compound molecule is referred to as a polyatomic element. The periodic table only has three polyatomic elements: selenium, sulfur, and phosphorous.
To know more about Nucleophile visit:
https://brainly.com/question/14052597
#SPJ4
The molar concentration of hydronium ion in pure water at 25°C is - A) 0.00 B) 1.0 x 10-7 C) 1.0 * 10-14 D) 1.00 E) 7.00
The molar concentration of hydronium ion in pure water at 25°C can be calculated using the equation [H3O+] = 10-14/[H2O] = 10-14. Therefore, the molar concentration of hydronium ion in pure water at 25°C is 1.0 x 10-7.
The molar concentration of hydronium ion in pure water at 25°C can be calculated using the equation [H3O+] = 10-14/[H2O] = 10-14. This equation states that the molar concentration of hydronium ion in pure water at 25°C is equal to 1.0 x 10-7. This value is found by taking the inverse of the molar concentration of water, which is 1.0 x 10-14, and multiplying it by 10-14. This value is important because it determines the degree of acidity or alkalinity of the water, which affects its suitability for use in a variety of applications. Knowing the molar concentration of hydronium ion in pure water at 25°C is essential for accurately measuring and adjusting the acidity or alkalinity of water for various purposes.
learn more about hydronium here
https://brainly.com/question/14619642
#SPJ4
Identify the conjugate acid for each base.
conjugate acid of H2PO−4 :
conjugate acid of SO2−4 :
conjugate acid of NH3 :
A proton given to a base creates a conjugate acid, while a proton taken away from an acid creates a conjugate base.
What is the conjugate acid of NH3 , H2PO−4 and H2PO−4?As a result, a proton and the base hydrogen phosphate ion interact to create a conjugate acid. Consequently, dihydrogen phosphate ion, a conjugate acid, is created.The sulfate ion (SO42) is the conjugate base of HSO4-, which is generated by accepting a proton, and H2SO4-, which is the conjugate acid. H2SO4 is hence the conjugate acid of HSO4-.NH4+ is NH3's conjugate acid.ion of ammonium,In order to create its conjugate acid, ammonium ion (NH4+), NH3 functions as a base by accepting a proton. NH4+ is thus the conjugate acid of NH3. Always on the right side, always with one hydrogen more or one less, strong acids have a weak conjugate base, and weak acids have a strong conjugate base.To learn more about conjugate acid refer to :
https://brainly.com/question/12584785
#SPJ4
The conjugate acid of H2PO4 is H3O+, the conjugate acid for (SO2)4 is HSO4- and the conjugate acid of NH3 is NH4+. These are the conjugate bases for the given species.
What is the conjugate acid of NH3:?NH4+ is NH3's conjugate acid ion of ammonium, In order to create its conjugate acid, ammonium ion (NH4+), NH3 functions as a base by accepting a proton. NH4+ is thus the conjugate acid of NH3. Always on the right side, always with one hydrogen more or one less, strong acids have a weak conjugate base, and weak acids have a strong conjugate base.
What is entailed by conjugate acid and base?A proton given to a base creates a conjugate acid, while a proton taken away from an acid creates a conjugate base. As a result, a proton and the base hydrogen phosphate ion interact to create a conjugate acid. Consequently, dihydrogen phosphate ion, a conjugate acid, is created.
To learn more about conjugate acid refer to:
brainly.com/question/12584785
#SPJ4
2. What wave moves in a direction perpendicular to the force that created it?
Longitudinal wave
Reflected wave
Transverse wave
Interference wave
The transverse wave moves in a direction perpendicular to the force that created it. Therefore, option C is correct.
What is a transverse wave?Transverse waves can be defined as waves that oscillate perpendicular to the direction in which the wave is traveling forward. Examples of transverse waves involve electromagnetic waves, seismic S waves, and water surface ripples.
In a transverse wave, particles oscillate up and down w.r.t. mean location rather than following the path of its transmission.
A transverse wave can be demonstrated as where every particle of the medium travels about its mean location in a direction that is the opposite of the propagating.
Transverse waves can be formed in solids and on the surface of liquids. Transverse waves cannot be created in liquids or gases.
Learn more about Transverse waves, here:
brainly.com/question/13863548
#SPJ1
Answer: transverse wave
Explanation:
