Directions: Write the balanced equation for each of the following situations. . In addition, list the reaction type. YOU MUST TELL THE AMOUNTS OF EVERY SUBSTANCE THAT REMAINS IN THE CONTAINER AT THE END OF THE REACTION. ASSUME THAT ALL REACTIONS GO TO COMPLETION. If only STOICHIOMETRY, tell how much of the excess reactant is used!!!! Reaction Type a. Combination Reaction b. Decomposition Reaction c. Single Displacement / THIS IS ONE TYPE OF Oxidation Reduction Reaction d. Precipitation Reaction e. Gaseous Reaction f. Neutralization Reaction g. Combustion Reaction 5. 2.11 mg of hydrogen peroxide decomposes in the presence of manganese dioxide to form water and oxygen 5. Balanced Chemical Equation Reaction Type:At the completion of reactions: Grams of hydrogen peroxide: Grams of water: Grams of oxygen gas:
Answers
First, let's write the balanced chemical reaction:
2 H2O2 ---MnO2--> 2 H2O + O2
This reaction is a b. Decomposition Reaction of hydrogen peroxide.
Step 1. Let's transform 2.11 mg of H2O2 into moles using the following equation mole = mass / molar mass
Step 2. We are going to use the equation proportion to calculate the quantity in moles of each compound.
Step 3. We are going to transform moles into grams of each compound using the following equation: mass = mole x molar mass
Step 1.
We need to transform 2.11 mg to g. We just need to divide by 1000,
So: 2.11 x 10^-3 g of H2O
mole = 2.11 x 10^-3/34.02
mole = 6.20 x 10^-5 moles
Step 2.
2 moles of H2O2 ---- 2 moles of H2O
6.20 x 10^-5 moles ---- x moles of H2O
x = 6.20 x 10^-5 moles of H2O
2 moles of H2O2 ---- 1 moles of O2
6.20 x 10^-5 moles ---- x moles of O2
x = 3.10 x 10^-5 moles of O2
Step 3.
molar mass of O2 : 32 g/mol
molar mass of H2O: 18 g/mol
mass of H2O = 6.20 x 10^-5 x 18 = 1.12 x 10^-3 g
mass of O2 = 3.10 x 10^-5 x 32 = 9.92 x 10^-4 g
Related Questions
a flexible container at an initial volume of 8.15 l contains 9.51 mol of gas. more gas is then added to the container until it reaches a final volume of 15.5 l. assuming the pressure and temperature of the gas remain constant, calculate the number of moles of gas added to the container.
Answers
The number of moles added to increase the volume of the gas from 8.51 L to 15.5 L is 8.67 moles.
The initial volume of the gas is 8.15 L and final volume of gas is 15.5 L and the initial moles are 9.51 moles.
As per the Ideal gas equation,
PV = nRT
where,
P is pressure,
V is volume of gas,
n is the number of moles of gas,
R is the gas constant,
T is the temperature of the gas.
Rearranging the equation,
V/n = RT/P
The left side is constant, so, it is valid to see,
V₁/n₁ = V₂/n₂
V₁ is initial volume,
n₁ is the initial moles,
V₂ is the final volume,
n₂ is the final moles.
So, we can write this by putting the values,
8.51/(9.5) = 15.5/n₂
n₂ = 18.17
The number of moles added = n₁ - n₂
Added moles = 8.67 moles
The moles added are 8.67 moles.
To know more about Ideal gas equation, visit,
https://brainly.com/question/25290815
#SPJ4
how many possible monobromination products of butane are there? include minor product(s) not just the major product(s). if a product exists as a pair of enantiomers be sure to count both enantiomers as a distinct product.
Answers
Possible monobromination products of butane are 3.
What is a monobromination?Monobromination as defined by medicine:
an organic molecule is given one bromine atom by the addition process.
In a chemical process known as bromination, a compound is subjected to bromination, which adds bromine to the substance. Following bromination, the result will possess traits distinct from the initial reactant.
Any reaction or process known as bromination entails the introduction of bromine into a molecule alone. Alkene bromination with the electrophilic addition of Br₂. electrophilic aromatic substitution-based bromination of a benzene ring. Benzylic position bromination using a free radical substitution process.
By way of the reaction, a total of three monobrominated compounds will be produced.
To know more about monobromination visit:
https://brainly.com/question/16048943
#SPJ4
Question is located on the picture below
Answers
Across a period, elements gain a proton and valence electron.
Which statement correctly compares the weight and the mass of an object?
Answers
Answer:
Its weight changes based on location, but its mass stays the same.
Explanation:
See attached worksheet.
How many molecules of sucrose are
in 205 g C12H22011?
(C12H22O11, 342.34 g/mol)
[?]
[? ]×10¹²] molecules C12H22O11
Coefficient (green) Exponent (yellow)
I
Enter
Answers
To begin with, sucrose is C12H22O11. Additionally, we must determine how many moles of sucrose there are in a pound of sucrose:
The moles of sucrose are 454g, 342.30g, mol1, and 1.33mol.
Is sucrose a good sugar to use?
Brief Summary According to a University of California, Davis study that was published in the Journal of Clinical Endocrinology and Metabolism, sucrose, the more "natural form of sugar," may be just as harmful to your health as HFCS.
Is sugar a healthy food?
Your body only receives sugar when you consume sucrose like soda or candy, and typically too much of it. The threat is present here. You run the risk of major health problems if you consume too much added sugar (fructose or sucrose) in your diet.
To know more about sucrose visit:
https://brainly.com/question/3850162
#SPJ1
Label the diagram of ionic bonds with the name of the 2 elements involved
the options are
Lithium, fluorine, sodium and chlorine
And it has a picture of the periodic table above Brainly just let's me use one picture at a time and
that was the most important
I took 3 pictures the first one was the periodic table, the second one is shown and the third were just the options listed above ^
Answers
Answer:
Lithium (Li) and Fluorine (F)
Explanation:
Assume the atom is neutral and count the electrons. That will also be the number of protons (i.e., the atomic number).
See attached worksheet.
Beryllium, the first element in group 2, has an atomic number of 4. The second element in this group has an atomic number of.
Answers
Answer:
12.
Explanation:
Beryllium is in Group 2 (Column 2) with the atomic number 4.
The atomic number to the next element in the group would be right below it, Magnesium (Mg). Magnesium has an atomic number 12.
The atomic number is the small number on the top left corner of the square of the element.
Profiles Tab Window HelpE- CengageNOW Online texgmenttakeCovalentActivity.do?locator assignment-takeTUTOR Percent YieldCengage: Digital Course S xResubmit[References]Consider this reaction, which occurs in the atmosphere and contributes to photochemical smog:N₂(9) + O₂(g) -2NO(g)If there is 16.28 g N₂ and excess O₂ present, the reaction yields 27.5 g NO. Calculate the percent yield for thereaction.Show Approach Show Tutor StepsE-OWL2| Online teaching x E OWLA21 Assignments | D902IncorrectYou can work though the tutor steps and submit your answer again.2
Answers
Answer:
[tex]78.83\text{ \%}[/tex]Explanation:
Here, we want to calculate the percentage yield of the reaction
Mathematically, we have that as:
[tex]\frac{Actual\text{ Yield}}{Theoretical\text{ Yiled }}\text{ }\times\text{ 100 \%}[/tex]The mass of the product NO given in the question is the actual yield which is 27.50 g
Now, let us get the theoretical yield
We find the number of moles of nitrogen gas that reacted
Mathematically, that is the mass of nitrogen gas divided by the molar mass
The molar mass of the nitrogen gas is 28 g/mol
The number of moles is thus:
[tex]\frac{16.28}{28}\text{ = 0.5814 mol}[/tex]From the equation of reaction, 1 mole of N2 yields 2 moles of NO
Thus, 0.5814 mol of N2 will yield:
[tex]0.5814\text{ }\times\text{ 2 = 1.1628 mol}[/tex]Now, to get the mass of NO produced, we multiply this number of moles by the molar mass of NO
The molar mass of NO is 30 g/mol
The mass that was produced is thus:
[tex]30\text{ }\times\text{ 1.1628 = 34.884 g}[/tex]Finally, we have the percentage yield as:
[tex]\frac{27.50}{34.884}\text{ }\times\text{ 100 \% = 78.83 \%}[/tex]How do scientists predict the polarity of molecules?
Answers
When a molecule lacks polar bonds, there is no permanent charge difference between parts of the molecule, and the molecule is nonpolar.
Because the electron charge on both atoms is identical, the Cl2 molecule has no polar bonds. As a result, it is a nonpolar molecule. Hydrocarbons are nonpolar molecular substances because none of the bonds in hydrocarbon molecules, such as hexane, C6H14, are significantly polar.
The molecule is nonpolar if the arrangement is symmetrical and the arrows are of equal length. The molecule is polar if the arrows are of different lengths and do not balance each other. The molecule is polar if the arrangement is asymmetrical.
Refer to for more information on molecule polarity.
https://brainly.com/question/584255?referrer=searchResults
Select a full set of quantum numbers for the following.
(a) the outermost electron in an K atom
n = 4; l = 0; ml = 0; ms = +1/2
n = 3; l = 1; ml = 1; ms = −1/2
n = 4; l = 1; ml = −1; ms = +1/2
n = 5; l = 0; ml = 0; ms = −1/2
(b) the electron gained when a Br atom becomes a Br − ion
n = 3; l = 2; ml = −1; ms = +1/2
n = 4; l = 2; ml = 2; ms = +1/2
n = 5; l = 1; ml = 0; ms = −1/2
n = 4; l = 1; ml = 1; ms = −1/2
(c) the electron lost when a Fr atom ionizes
n = 7; l = 0; ml = 1; ms = −1/2
n = 6; l = 1; ml = −1; ms = +1/2
n = 6; l = 1; ml = 0; ms = −1/2
n = 7; l = 0; ml = 0; ms = +1/2
(d) the highest energy electron in the ground-state C atom
n = 2; l = 1; ml = 0; ms = +1/2
n = 1; l = 0; ml = 0; ms = −1/2
n = 3; l = 2; ml = 1; ms = +1/2
n = 2; l = 2; ml = −1; ms = −1/2
Answers
(a) The full set of Quantum Numbers are n=4, l=0, ml=0, ms=+1/2
(b) The full set of Quantum numbers are ; n=4 , l= 1, ml= 1, ms= -1/2
(c) The full set of Quantum Numbers are n = 7; l = 0; ml = 0; ms = +1/2
(d) The full set of Quantum Numbers are n = 2; l = 1; ml = 0; ms = +1/2
Quantum Numbers is a set of numbers used to describe the position and energy of the electron in an atom. There are four quantum numbers namely, principal (n) , azimuthal(l), magnetic (ml) and spin quantum numbers (ms) .
(a) Potassium has atomic no Z=19
Electronic configuration of potassium= 1s² 2s²2p⁶ 3s² 4s¹
Outermost electron = 4s¹
n= 4 , l=0 since the outermost electron is in s orbital
and ml can change from -l to +l but if l= 0 because it is an s-orbital then ml must be zero too; m=0
ms can be either +1/2 or -1/2 depending on yhe spin of electron, it does not matter in this case. So, ms= =1/2
The full set of Quantum Numbers are n=4, l=0, ml=0, ms=+1/
(b) Bromine has atomic number Z= 35 and Br⁻ has atomic number= 36
Electronic configuration for bromine when an electron is gained
= (Ar) 3d¹⁰ 4s² 4p⁶
The electron the bromine atom gains to form bromide makes bromide have the same electronic configuration as the neon gas krypton. Krypton's electron configuration ends in 4p⁶. . The 4 is the n-value and the l-value is 1, which is a p-orbital. Since the p-orbital is filled, the last subshell ml is filled and it has a value of +1. The last electron filled in an orbital always has an ms = -1/2
The full set of quantum numbers are; n=4 , l= 1, ml= 1, ms= -1/2
(c) Fr has an atomic number = 87 ( Rn)7s¹
Electronic configuration for an electron lost in Fr atom= 1s² 2s²2p⁶ 3s²3p⁶ 3d¹⁰4s² 4p⁶ 4d¹⁰ 5s² 5p⁶ 4f¹
Therefore, for lost electron the outermost electron is in 7s⁰ shell.
n= 7, l=0 as the outermost electron is in s orbital and therfore ml= 0 ans ms= +1/2
Full set of quantum numbers are n = 7; l = 0; ml = 0; ms = +1/2
(d) carbon has atomic number Z=6
Electronic configuration = 1s² 2s² 2p²
In the ground state highest energy principal quantum no n=2
l= 1 as electron is in p orbital , ml=0 and ms= +1/2
full set of quantum numbers are= n = 2; l = 1; ml = 0; ms = +1/2
To know more about quantum numbers
https://brainly.com/question/17854272
#SPJ1
what is stripped from each water molecule
Answers
Answer:
HS is stripped from each O.
Why was temperature change for the water slight in your experiments while the temperature change for the metal was large?.
Answers
The difference in the temperature change can be explained by the difference in the specific heat capacity for water (4.186 J/g°C) and the specific heat capacity for the metal you used (metals have small values for specific heat capacities).
Specific heat capacity is a material characteristic that quantifies how much heat (in Joules) is needed to change the temperature of 1 g of the material by a single degree (°C or K). Water has a relatively high specific heat capacity (4.186 J/g°C), which means that you need to add 4.186 Joules of heat to increase the temperature of 1 g of water by 1 °C.
On the other hand, metals have small values for their specific heat capacities (0.900 J/g°C for aluminum, 0.386 J/g°C for copper, 0.420 J/g°C for steel), which means that their temperature will drastically change for the same amount of heat invested or taken away.
You can learn more about specific heat capacity here:
brainly.com/question/28302909
#SPJ4
I need HELP fast!!!
At the end of the video, the man getting interviewed provides an analogy about meditation and states of matter. Create your own analogy that explains the differences between the behavior of molecules in different states of matter. Explain.
Answers
The differences between the behavior of molecules in different states of matter is marathon runner
Molecule are made up of one or more atom and also the smallest particle of any substance which can exist independently and retain physical and chemical properties of the substances
They would be close to each other and are tightly packed like solid molecules and then the race was stared they were loosely packed compared to solid and then at the game reaches at the end point the players will be spread out and they would be more loosely packed compared to solid and liquids
Know more about states of matter
https://brainly.com/question/9402776
#SPJ1
9. suppose you are analyzing an unidentified spread that has qualities of butter. how could determining whether or not the product was hydrogenated help you to identify the item?
Answers
We will be able to tell if the spread is margarine if it has been hydrogenated.
A liquid unsaturated fat can be made into a solid fat by the process of hydrogenation. In order to make an unsaturated fat saturated, hydrogen atoms must be injected into it. Trans fat, a particular form of fat, is created during this hydrogenation process.
An unsaturated fat undergoes hydrogenation, changing from a liquid to a solid. Unsaturated fats become saturated ones as a result of this process. The remaining unsaturated fats undergo another molecular shape change during this phase. An "trans" form is the end outcome.
We must maintain both of them at room temperature in order to analyze the unidentified spread. The process of hydrogenating corn oil results in the production of margarine.
Learn more about chemical reactions at
https://brainly.com/question/19626681?referrer=searchResults
#SPJ4
if 250 ml of a 0.0193 m cacl2 solution is prepared, how many moles of cacl2 would 25 ml of this solution contain? a. 0.0193 moles b. 0.00193 moles c. 4.83x10-3 moles d. 4.83x10-4 moles
Answers
25 ml of the solution contains 4.83 x 10⁻⁴ moles of CaCl₂.
Concentration, or the amount of solute in a solution, can either be expressed in molarity, M, moles of solute per liter of solution, or molality, m, moles of solute per kilogram of solution.
The concentration of the CaCl₂ solution is 0.0193 M.
Hence, there are 0.0193 moles of CaCl₂ per liter of the solution.
M = 0.0193 M
volume of solution = 25 ml
Multiply the volume by the concentration to get the number of moles.
M = moles of solute / volume of solution
moles of solute = M (volume of solution)
moles of solute = 0.0193 M(25 ml)(1 L / 1000 ml)
moles of solute = 4.83 x 10⁻⁴
Learn more about molarity here: brainly.com/question/23243759
#SPJ4
most of the triose phosphate produced by the calvin cycle is used to regenerate rubp, which is the first reactant in the cycle. what output of the light reactions is directly required for the regeneration steps?
Answers
Adenosine triphosphate is directly required for the regeneration steps.
What is Adenosine Triphosphate?
Adenosine triphosphate (ATP) is the source of energy for use and storage at the cellular level. The structure of ATP is a nucleoside triphosphate, consisting of a nitrogenous base (adenine), a ribose sugar, and three serially bonded phosphate groups.
What is Calvin cycle?
The Calvin cycle, light-independent reactions, bio synthetic phase, dark reactions, or photosynthetic carbon reduction cycle of photosynthesis is a series of chemical reactions that convert carbon dioxide and hydrogen-carrier compounds into glucose.
To learn more about ATP, click https://brainly.com/question/19786223
#SPJ4
An engine overheats and causes a car to catch on fire- is this a physical or chemical property?
Answers
Answer:
physical
Explanation:
HAVE GREAT DAY!
what is true of atoms, elements, and minerals? multiple select question. when a mineral is separated into its component atom parts, it is still a mineral. an element is a type of atom that has a specific number of protons. if a single atom of an element is broken apart, its pieces are still recognizable as that element. an atom is the smallest unit of an element that retains the characteristics of that element. minerals are composed of chemically bonded elements.
Answers
Correct statements are:
An element is a type of atom that has a specific number of protons.
An atom is the smallest unit of an element that retains the characteristics of that element.
Minerals are composed of chemically bonded elements.
When a mineral is separated into its component atom parts, those parts will act according to the element they belong to, and the elements have properties that differ from the original mineral, because of chemical bonds formed during the creation of the mineral.
If a single atom of an element is broken apart, its pieces are protons, neutrons, and electrons, particles that are universal for all elements, and there is no way to distinguish, for example, iron neutrons from hydrogen neutrons. In cases of radioactive decay, atoms of elements may break down to form new elements.
You can learn more about chemical bonds here:
brainly.com/question/15444131
#SPJ4
3.23x106 kJ to kcal
Express the value kilocalories in to three significant figures
help me please!
Answers
The value into kilocalories up to three significant figures is 77.1 x 10^3 kilocalories
1 kj = 0.239 kilocalorie
3.23 x 10^6 kJ x 0.239 kilocalorie = 77.1 x 10^3 kilocalories
3.23 x 10^6 kJ = 77.1 x 10^3 kilocalories
What is Significant figure ?In chemistry, Significant figures are the digits of value which carry meaning towards the resolution of the measurement. They are also called significant figures in chemistry. All the experimental measurements have some kind of uncertainty associated with them.
Learn more about Significant figure here:
https://brainly.com/question/24491627
#SPJ13
What is the weighted average of a
nail in the sample data given?
Nail Size
3d
16d
Number of
Nails
24
176
Percent
Abundance
12
88
Mass of One
Nail (g)
3. 30
12. 25
Weighted
Average
[?]
Hint: The percent abundance takes into account
the relative number of each type of nail.
Weighted Average
Enter
Answers
The weighted average of the nail size in the sample data is 0.0571 d.
To calculate the weighted average of the nail sizes in the given data, we need to first calculate the total mass of all the nails in the sample. We can do this by multiplying the number of nails of each size by the mass of one nail of that size and then adding up the results:
Total mass = (24 nails of size 3d) x (3.30 g/nail) + (176 nails of size 16d) x (12.25 g/nail)
Total mass = 79.20 g + 2156.00 g
Total mass = 2235.20 g
Next, we can calculate the weight fraction of each nail size by dividing the mass of nails of each size by the total mass:
Weight fraction of 3d nails = (24 nails) x (3.30 g/nail) / 2235.20 g = 0.000360
Weight fraction of 16d nails = (176 nails) x (12.25 g/nail) / 2235.20 g = 0.007901
Finally, we can calculate the weighted average of the nail sizes by multiplying each weight fraction by the corresponding nail size and then adding up the results:
Weighted average = (0.000360 x 3d) + (0.007901 x 16d) = 0.0571 d
For more question on average click on
https://brainly.com/question/18554478
#SPJ11
A large bar of solid gold is melted into liquid. the liquid is then poured into molds to make a number of gold coins. was this chemical or physical? explain.
Answers
Answer:
physical change
Explanation:
melting is a physical change, a physical change does not involve a change in chemical bonds.
How does one periodic trend connect a racial trend in American Society? Why is it important to understand racial trends in American Society?
Answers
A periodic trend connect a racial trend in American Society ad it affect the distribution of power, wealth, opportunity, and create enduring social stratifications.
It is important to understand racial trends in American Society as it helps in understanding the society better.
How to illustrate the information?A trend is a shift or progression toward something new or different. Global migration is one of the most significant developments nowadays.
Today, 244 million individuals live in nations other than their native countries, which is three times the number in 1960. The world's migrant population would be the sixth largest country.
It should be noted that among the issue of racial trend is also the issue of black lives matter. This is important in order to end discrimination and also enhance the development in the country.
Learn more about American society on:
https://brainly.com/question/13323062
#SPJ1
A piece of copper with a volume of 100cm3 has a mass of 890g. Explain how you could use this information to find out how much mass would be in 13cm3 of copper.
Answers
The mass of the 13 cm³ of copper, given that 100 cm³ of it has a mass of 890 g is 115.7 g
How to determine mass of the copperWe'll begin by obtainig the density of the copper. This can be obtained as illustrated below:
Volume of copper = 100 cm³Mass of copper = 890 gDensity of copper =?Density = mass / volume
Density of copper = 890 / 100
Density of copper = 8.9 g/cm³
Finally, we shall determine the mass of the 13 cm³ of copper. This is obatined as follow:
Volume of copper = 13 cm³Density of copper = 8.9 g/cm³Mass of copper = ?Density = mass / volume
Cross multiply
Mass = Density × volume
Mass of copper = 8.9 × 13
Mass of copper = 115.7 g
Thus, the mass of the copper is 115.7 g
Learn more about density:
https://brainly.com/question/952755
#SPJ1
The mass of 13 cm³ of copper with a volume of 100 cm³ has a mass of 890 g is 115.7 grams.
What is mass?Mass is defined as a dimensionless number used to describe the mass of a particle or item.
We'll start by finding out how dense copper is.
Given, Volume = 100 cm³
Mass = 890 g
Density = Mass / Volume
= 890 g / 100 cm³
= 8.9 g/cm³
Now to determine mass is 13 cm³ of copper is
Density = Mass / Volume
So, Mass = Density x Volume
= 8.9 g/cm³ x 13 cm³
= 115.7 grams
Thus, the mass of 13 cm³ of copper with a volume of 100 cm³ has a mass of 890 g is 115.7 grams.
To learn more about mass, refer to the link below:
https://brainly.com/question/26789700
#SPJ1
a soluble iodide was dissolved in water. then, an excess of silver nitrate, , was added to precipitate all of the iodide ion as silver iodide, . a question content area if 2.940 g of the soluble iodide gave 1.329 g of silver iodide, how many grams of iodine are in the sample of soluble iodide?
Answers
In the sample of soluble iodide, 0.7183 grams iodine are present.
To find the concentration of iodine in grams we must known about molar mass of Silver and molar mass of Iodine.
Molecular weight of Ag = 107.86
Molecular weight of I = 126.90
Molecular weight of = 107.86 + 126.90 = 234.76
Percentage of I in [tex]AgI[/tex] is = (126.90/234.77) x 100 = 54.05%
so we can convert percentage of Iodine in silver iodide into grams by using formula percentage of Iodine/100x grams of silver Iodide.
so,Concentration of Iodine in grams=[tex]\frac{54.05}{100}[/tex]×1.329
=0.5405x1.329
=0.7183g
1.329g of [tex]AgI[/tex] contains 0.7183g of iodine in soluble Iodide.
To learn more about Concertration ,Click Here
brainly.com/question/6184701
#SPJ4
Explain the effect of an enzyme on activation energy of a reaction.
Answers
Answer:
Enzymes act as catalysts, accelerating the chemical reaction by lowering the activation energy. Activation energy is the energy needed for the particles to react. Enzymes come out of the reaction unchanged.
Explanation:
what is the proper definition of an isotope? group of answer choices atoms in which the number of protons is different from the number of neutrons. atoms with a mass number greater than the atomic number. atoms of an element with the same number of protons but different number of neutrons. atoms that spontaneously emit radiation.
Answers
Isotopes are atoms of an element with the same number of protons but a different number of neutrons.
Isotopes are different atom types that share the same atomic number and place in the periodic table but have different quantities of neutrons in their nuclei, resulting in various nucleon numbers or atomic masses.
Stable and unstable isotopes are the two basic categories of isotopes. 254 stable isotopes are known. Scientists refer to all synthetic (lab-made) isotopes as radioisotopes since they are radioactive due to their instability.
Examples of isotopes include carbon 12, which has 6 neutrons, carbon 13, which has 7 neutrons, and carbon 14, which has 8 neutrons. Carbon 14 is the radioactive isotope while the rest are stable.
To know more about isotopes, click on https://brainly.com/question/14220416
a certain compound is found to have the percent composition (by mass) of 85.63% c and 14.37% h. the molecular formula contains 6 carbon atoms. how many hydrogen atoms are contained in a molecular of this compound?
Answers
A molecular of this compound contains 6 hydrogen atoms. An atom is a component of an element. Each atom in a specific element has only one type of atom. Electrons, protons, and neutrons
What is meant by atom?An atom is the smallest component of ordinary matter that makes up a chemical element. Every solid, liquid, gas, and form of plasma is made up of neutral or ionized atoms. Atoms are extremely small, with a diameter of 100 picometers on average.A chemical element is defined by its atoms, which are small pieces of matter. An atom consists of a core nucleus and one or more negatively charged electrons that orbit around it. The positively charged, somewhat massive protons and neutrons that comprise the nucleus may exist.The modern atomic concept was first proposed by eminent chemist John Dalton (1766–1844). But his atom was as solid as a cue ball.To learn more about atom, refer to:
https://brainly.com/question/23390564
#SPJ1
9. which flask contains the sample with the greatest density? a flask a b flask b c flask c d flask d e flask e 10. which flask contains the smallest number of moles of gas?
Answers
9 = T = 40 degrees Celsius, P = 2 atm is the greatest density
10 = T = 50 degrees Celsius, P = 0.5 atm is the smallest number of moles of gas .
Exactly which flask has the highest density?The gas with the highest atomic mass will be contained in the flask with the highest density.
Which flask would hold the most moles of gas at any given time?At constant volume and pressure, the ratio of the gas's moles to the temperature is inverse. Since the temperature was dropped, the flask containing helium will thus contain the most moles of gas.
Which flask is under the greatest pressure?Pressure and temperature have a straight relationship, PV = nRT, according to the ideal gas law. The pressure will be maximum in the heated helium flask because of this. d.
To know more about highest density visit:-
https://brainly.com/question/3883825
#SPJ13
Conservation in a reaction means that the number of each type of atom is equal on each side of the arrow. This is a _____
Answers
Answer: There is equal number of each type of atom on the reactant and product side.
Explanation:
Dry ice sublimes at −78. 5 oc at a pressure of 1 atm. At room temperature and 1 atm pressure, what is happening to the dry ice molecules on a molecular level as sublimation occurs?.
Answers
Dry ice sublimates when its molecules get enough thermal energy to the intermolecular holding the solid crystal together in some cases. This allows some molecules to transition directly into the vapor phase.
What is the process of sublimation?A substance can sublimate directly from its solid to it's own gaseous state without going through a liquid phase. Sublimation is the term most frequently used to describe the process through which snow and ice turn into water vapor in the air before even melting into liquid for those of us who is interested in the water cycle.
Why is sublimation important ?The sublimation procedure is used by chemists to clean up their substances. Typically, a solid is heated in a sublimation apparatus under vacuum. A non-volatile residue of impurities is left behind as the solid volatilizes and condenses as a refined chemical on a cooled surface (cold finger) at this lower pressure.
To know more about Sublimation visit:
https://brainly.com/question/28626755
#SPJ4
