The two results match. The Matlab result is in radians instead of degrees and does not include the 126.9 degree phase shift.
What is degrees?Degrees are units of measure used to measure angles or arcs. A full circle is 360 degrees, and each degree is divided into 60 minutes. Degrees are often used to describe temperatures and angles. For example, the boiling point of water is 100 degrees Celsius or 212 degrees Fahrenheit. And, a right angle is 90 degrees. Degrees can also be used to measure arcs and distances, such as the size of the Earth's orbit around the sun. When talking about the Earth's orbit, it is measured in degrees of longitude and latitude. Degrees are also commonly used in navigation to determine bearing and directions.
The Matlab code to solve the inverse Laplace transform is as follows:syms t s
F = 6*(s+34)/(s*(s^2+10*s+34));
f = ilaplace(F)
This code produces a result of
f(t) = 6 + 10*exp(-5*t)*cos(3*t).
To learn more about Degrees
https://brainly.com/question/30100097
#SPJ4
A variable mesh screen produces a linear and axisymmetric velocity profile as indicated below in the air flow through a 2-ft diameter circular cross section duct. The static pressures upstream and downstream of the screen are 0.2 and 0.15 psi and are uniformly distributed over the flow cross section area. Neglecting the force exerted by the duct wall on the flowing air, calculate the screen drag force.
The term "drag force" refers to the resistive force that arises when a body moves through air or a fluid. The drag coefficient and drag force are intimately correlated.
Comparing drag force and air resistance?One example of the drag force, which is the force that objects experience when moving through a fluid, is air resistance (liquid or gas). Drag force, like kinetic friction, only manifests when an item is moving and is pointing in the opposite direction.
Is gravity a drag force?But as the person's speed rises, the drag force also does, until it reaches the point where it equals the gravitational force and produces a net force of zero.
To know more about drag force visit :-
https://brainly.com/question/13267336
#SPJ4
the emr from a computer monitor can be picked up as far away as ____ mile.
Answer: 1000 miles
Explanation:
How many core competencies should you define to build your strategy?
Select an answer:
• as many as possible
• 1
• 3
• 2
What kinds of strategic filters should you have?
Select an answer:
• short term and long term
• strategic and tactical
• operational and philosophical
• quantitative and qualitative
The S" in SWOT stands for:"
Select an answer:
• strengths
• speed
• skills
• sourcing
When you assess portfolio diversification, how many 2x2's should you use to assess it?
Select an answer:
• as many as needed
• 2
• 1
• 3
A strategy is the first S in SWOT, while the other four are operational, tactical, operational-philosophical, quantitative, and qualitative.
The skills and abilities that make up a company's competitive advantages are known as core competencies. A current management theory states that a company must recognize, develop, and leverage its core competencies in order to surpass the competition. Leadership is the first example of a core competency. The capacity to properly manage and lead a team is a valuable skill in any role or company. The six competences taught in NCO Professional Military Education must be possessed by all non-commissioned officers, regardless of Military Occupational Specialty (MOS), rank, or position (PME). These skills include leadership, communication, readiness, management of training programs, operations, and program development. Filters, both quantitative and qualitative, are crucial strategic tools.
Learn more about A strategy here:
https://brainly.com/question/29902895
#SPJ4
When creating a double flare on tubing, how far above the top of the tubing clamp should the tube extend?
Answer:
When creating a double flare on tubing, it is recommended that the tube extend approximately 1/8 to 1/4 inch above the top of the tubing clamp. This allows for a sufficient amount of material to be flared without creating excess excess material that could potentially cause issues during the flaring process. It is important to properly measure and mark the tubing before beginning the flaring process to ensure that the final result meets the desired specifications.
1. Create pseudocode or a flowchart that logically outlines the steps that will allow the player to move between rooms using commands to go North, South, East, and West. Use your notes from Step #3 to help you design this section of code. Be sure to address the following:
• What input do you need from the player? How will you prompt the player for that input? How will you validate the input?
• What should the program do if the player enters a valid direction? What output should result?
• What should the program do if the player enters an invalid direction? What output should result?
• How will you control the program flow with decision branching and loops?
Since the requirements for the question are rather simple, I'll write the entire pseudocode in accordance with them.
PSEUDOCODE:
INITIALIZE currentRoom = "Main Hall"
LOOP BEGIN
INPUT direction
IF currentRoom IS "Main Hall"
IF direction IS "North"
currentRoom = "Buddhist Library"
ELSE IF direction IS "South"
currentRoom = "Kitchen"
ELSE IF direction IS "West"
currentRoom = "Monk Quarters"
ELSE IF direction IS "East"
currentRoom = "Zen Garden"
ELSE
OUPUT "Invalid Direction"
ELSE IF currentRoom IS "Buddhist Library"
IF direction IS "South"
currentRoom = "Main Hall"
ELSE IF direction IS "East"
currentRoom = "Sutra Depository"
ELSE
OUPUT "Invalid Direction"
ELSE IF currentRoom IS "Sutra Depository"
IF direction IS "West"
currentRoom = "Buddhist Library"
ELSE
OUPUT "Invalid Direction"
ELSE IF currentRoom IS "Monk Quarters"
IF direction IS "East"
currentRoom = "Main hall"
ELSE
OUPUT "Invalid Direction"
ELSE IF currentRoom IS "Kitchen"
IF direction IS "North"
currentRoom = "Main hall"
ELSE IF direction IS "East"
currentRoom = "Bell Tower"
ELSE
OUPUT "Invalid Direction"
ELSE IF currentRoom IS "Bell Tower"
IF direction IS "West"
currentRoom = "Kitchen"
ELSE
OUPUT "Invalid Direction"
ELSE IF currentRoom IS "Zen Garden"
IF direction IS "North"
currentRoom = "Buddha Palace"
ELSE IF direction IS "West"
currentRoom = "Main hall"
ELSE
OUPUT "Invalid Direction"
ELSE IF currentRoom IS "Buddha Palace"
IF direction IS "South"
currentRoom = "Zen Garden"
ELSE
OUPUT "Invalid Direction"
GOTO LOOP BEGIN LOOP END
To know more about PSEUDOCODE visit-
brainly.com/question/13208346
#SPJ4
Which information does a traditional stateful firewall maintain? Select all that apply. o Packet route o Network port o MAC address o Source and destination IP address o Data content
Information does a traditional stateful firewall maintain:
Packet route Network port MAC address Source and destination IP addressMaintaining Information with a Traditional Stateful FirewallA traditional stateful firewall maintains information such as:
Packet route Network port MAC addressSourceDestination IP addressThis information is used to identify the source and destination of traffic and to control the flow of data in and out of a network. By keeping track of this information, the firewall can more effectively monitor and control the traffic passing through the network. It also helps to ensure that only authorized traffic is allowed to pass through the network, protecting it from malicious activity.
Learn more about Firewall: https://brainly.com/question/13693641
#SPJ4
An active filter circuit is given in the figure below » Obtain the input-output differential equation for the circuit » What is the filter transfer function? » What is the order of the filter? » Sketch the magnitude of the frequency transfer function and state what type of filter it represents. » Estimate the cutoff frequency and the roll-off slope.
A filter circuit is one which removes the ac component present in the rectified output and allows the dc component to reach the load.
What is a filter circuit?An AC circuit known as a filter isolates some frequencies from other frequencies in mixed-frequency transmissions. Crossover networks and audio equalisers are two common uses for filter circuits. Having circuits that can selectively filter one frequency or a group of frequencies out of a circuit's mixture of different frequencies is occasionally beneficial. A filter circuit, or simply a filter, is a circuit created to carry out this frequency selection.
In high-performance stereo systems, filter circuits are frequently required when specific audio frequency bands need to be increased or suppressed for best sound quality and power efficiency.
You may be acquainted with equalisers, which allow the amplitudes of numerous frequency ranges to be changed to suit the preferences and acoustic characteristics of the listener.
To learn more about filter circuit refer to:
https://brainly.com/question/15188036
#SPJ4
All major PC operating systems feature a graphical user interface.O YesO No
The answer to this question is no. This is because all major PC operating systems do not feature a graphical user interface (GUI).
What is an operating system?An operating system may be defined as a program that significantly after being initially loaded into the computer by a boot program, manages all of the other application programs in a computer.
The application programs construct the utilization of the operating system by making requests for services through a defined application program interface (API).
The three most common operating systems for personal computers are Microsoft Windows, macOS, and Linux. All modern operating systems use a graphical user interface or GUI.
Therefore, the answer to this question is no. This is because all major PC operating systems do not feature a graphical user interface (GUI).
To learn more about Graphical user interface, refer to the link:
https://brainly.com/question/14758410
#SPJ1
What is an AWS service that allows you to automate the process of deploying and releasing test builds whenever a code change is made?
For dependable and quick application and infrastructure changes, use AWS CodePipeline, a continuous integration and delivery service. Every time there is a code change, CodePipeline builds, tests, and releases your code depending on the release process models you create.
What is AWS Cloud?An Amazon subsidiary called Amazon Web Services, Inc. (AWS) offers metered, pay-as-you-go on-demand cloud computing platforms and APIs to people, businesses, and governments.
Clients frequently utilize this in addition to autoscaling (a process that allows a client to use more compute in times of high application usage, and then scale down to reduce costs when there is less traffic).
Through AWS server farms, these cloud computing web services offer a range of services for networking, computing, storage, middleware, IOT, and other processing resources, as well as software tools.
Clients are relieved of administering, scaling, and patching operating systems and hardware thanks to this.
Amazon Elastic Compute Cloud (EC2), one of the fundamental services, enables users to have at their disposal.
Hence, Every time there is a code change, CodePipeline builds, tests, and releases your code depending on the release process models you create.
learn more about AWS click here:
brainly.com/question/28145530
#SPJ4
For dependable and quick application and infrastructure changes, use AWS CodePipeline, a continuous integration and delivery service.
Every time there is a code change, CodePipeline builds, tests, and releases your code depending on the release process models you create.
An Amazon subsidiary called Amazon Web Services, Inc. (AWS) offers metered, pay-as-you-go on-demand cloud computing platforms and APIs to people, businesses, and governments.
Clients frequently utilize this in addition to autoscaling (a process that allows a client to use more compute in times of high application usage, and then scale down to reduce costs when there is less traffic).
Through AWS server farms, these cloud computing web services offer a range of services for networking, computing, storage, middleware, IOT, and other processing resources, as well as software tools.
Clients are relieved of administering, scaling, and patching operating systems and hardware thanks to this.
Amazon Elastic Compute Cloud (EC2), one of the fundamental services, enables users to have at their disposal.
Hence, Every time there is a code change, CodePipeline builds, tests, and releases your code depending on the release process models you create.
To know more about AWS kindly visit
brainly.com/question/28145530
#SPJ4
unless otherwise posted, the speed limit in business and residential areas is ____ mph.
Answer:
20 mph
Explanation:
This is pretty common among most industrial sites and residential neighborhoods across the U.S.
if an airplane is loaded to the rear of its cg range, it will tend to be unstable about its
When an airplane is loaded toward the rear of its CG range, it is more likely to experience lateral axis instability.
What traits does a plane with CG loaded at the aft limit have?In addition to poor static and dynamic longitudinal stability, CG location aft of the permitted range may also result in extremely difficult control, severe stall characteristics, and extremely light control forces that make it simple to unintentionally overstress an airplane.
What is necessary if the CG of the airplane is front of normal?Greater induced drag is produced by the same aircraft with a forward CG. In other words, if the CG forward and normal cruising airspeed are desired, greater power setting will be necessary to create the extra push.
To know more about airplane loaded visit:-
https://brainly.com/question/4630043
#SPJ4
When a high-side service valve is located between a condenser and a refrigerant metering device, it may be referred to as a ____.
The high-side service valve located between the condenser and the refrigerant metering device might be referred to as a liquid line service valve.
In air conditioner service applications, the valves permit technicians to remove refrigerant from the unit without the removal of the system charge. The valves allow this work without affecting the normal operation of the unit. Liquid line valve is one such type of valve that keeps refrigerant in the liquid lines when the system is not running. To prevent liquid refrigerant migration, the liquid line solenoid valve closes when the thermostat's demand is met. The liquid line service valve is intended for use in longline applications.
You can leanr more about service valve at
https://brainly.com/question/28335109
#SPJ4
You arrive onsite to resolve an issue for a client. His computer is receiving random Blue Screens of Death (BSOD) on his Windows machines, but he can't pinpoint the cause. Which of the following would be the BEST first course of action?
Run a memory test to rule out RAM issues
Check that all the power cables are firmly inserted in the HDD and graphics card
Check the voltage on the power supply
Ensure that the monitor cable is firmly inserted
The BEST first course of action that should be taken is A: 'Run a memory test to rule out RAM issues'
The BSOD or Blue Screens of Death is a warning you see when your Windows-based computer interrupts operations and displays this warning on a blue screen. Officially, it is referred to as a 'stop error.' This warning informs you of a critical issue that forces Windows to reboot.
In the case where you attempt to solve an issue faced by a client in which their computer randomly receives a Blue Screen of Death (BSOD) on his Windows computer device, he is unable to determine the cause. Thus the best first step to be taken is to run a memory test in order to find out issues pertaining to RAM.
You can leanr more about BSOD at
https://brainly.com/question/14103767
#SPJ4
Which AWS service or feature will help improve availability by routing traffic to the closest healthy endpoints?
Answer:....
Explanation: i forgot what i was going to say
Identify the incorrect statement from the choices below: O A. A project may create a capability to perform a service.O B. It is not possible to terminate projects before the deadline. O C. A project can involve a single resource. O D. A project may have multiple phases.
The incorrect statement is that it is not possible to terminate projects before the deadline. This is incorrect because it is possible to terminate a project before the deadline.
Option B. It is not possible to terminate projects before the deadline.Terminating a Project Before the DeadlineProjects may be terminated for various reasons, including financial constraints, lack of resources, or changes in priorities. Terminating a project before the deadline can help an organization save money and resources. Terminating a project may also help an organization avoid further risks and liabilities associated with the project. It is important for organizations to evaluate the risks and benefits of continuing or terminating a project before its deadline.
Learn more about projects: https://brainly.com/question/25257437
#SPJ4
Technician A says that high-voltage wiring on a car is called primary wiring. Technician B says that low-voltage wiring is called secondary wiring. Who is right
Both technicians are correct. High-voltage wiring on a car is called primary wiring, and low-voltage wiring is called secondary wiring.
Primary and Secondary Wiring in a CarPrimary wiring is the high-voltage wiring used on a car. It is typically used for higher power applications, such as starting the engine, powering the headlights, and more. Secondary wiring is the low-voltage wiring used on a car. This wiring is used for less power-intensive applications, such as powering the radio, controlling the power windows, and more.Both primary and secondary wiring are important components of a car's electrical system, and both are necessary for the proper functioning of the vehicle.
Learn more about Wiring: https://brainly.com/question/25950911
#SPJ4
(a) Define a slip system. (b) Do all metals have the same slip system? Why or why not?
A slip system refers to a specific direction and plane in a crystal lattice along which atoms can move or "slip" in response to an applied stress.
What is a Slip system?
In a crystal lattice, a slip system is a particular direction and plane along which atoms can move or "slip" in response to an applied stress.
It is composed of a slip plane, which is a plane in the lattice along which atoms can move, and a slip direction, which is the direction in which atoms move within that plane. The combination of the slip plane and slip direction determines the specific slip system.
Is the slip system the same for all metals? If not, why not?
Different metals have different crystal structures, and therefore have different slip systems. The specific slip systems that exist in a metal depend on the arrangement of atoms in its lattice.
For example, body-centered cubic (BCC) crystals, such as iron and tungsten, have only one slip system, while face-centered cubic (FCC) crystals, such as aluminum and copper, have multiple slip systems.
The same is true for hexagonal close-packed (HCP) crystals, such as titanium and zinc, which have different slip systems than BCC or FCC crystals.
In general, the number and arrangement of atoms in a crystal lattice determine the possible slip systems in a metal.
To know more about Slip system, visit: https://brainly.com/question/14972176
#SPJ4
When judging the authority of a website, which of the following is *NOT* a judgment criterion?
Question 3 options:
a. Author information is provided
b. Affiliation
c. Layout of content
d. Accuracy
e. Type of URL
When judging the authority of a website, an element which is not a judgment criterion include the following: C. layout of content.
What is a website?In Computer technology, a website can be defined as a collective name which connotes a series of webpages that are interconnected and linked together with the same domain name, in order to provide certain information to end users.
Generally speaking, the judgment criteria that should be used in judging the authority of a website include the following:
Author information is providedAffiliationAccuracyType of uniform resource locator (URL).In conclusion, the layout of content is not a judgment criterion for judging the authority of a website.
Read more on website here: https://brainly.com/question/15827053
#SPJ1
A company manages global applications that require static IP addresses.
Which AWS service would enable the company to improve the availability and performance of its applications?
A. Amazon CloudFront
B. AWS Global Accelerator
C. Amazon S3 Transfer Acceleration
D. Amazon API Gateway
To increase redundancy, AWS Global Accelerator gives you a set of static IP addresses that may be mapped to numerous application endpoints located in different AWS Regions.
What is AWS Cloud?Amazon Web Services, Inc. (AWS), a subsidiary of Amazon, provides people, companies, and governments with metered, pay-as-you-go on-demand cloud computing platforms and APIs.
This is a common practice among clients in addition to autoscaling (a process that allows a client to use more compute in times of high application usage, and then scale down to reduce costs when there is less traffic).
These cloud computing web services include a variety of services for networking, computing, storage, middleware, IOT, and other processing resources, in addition to software tools, through AWS server farms.
This relieves clients from managing, scaling, and patching hardware and operating systems.
One of the key services that users can access is Amazon Elastic Compute Cloud (EC2).
Hence, To increase redundancy, AWS Global Accelerator gives you a set of static IP addresses that may be mapped to numerous application endpoints located in different AWS Regions.
learn more about AWS click here:
brainly.com/question/28145530
#SPJ4
AWS Global Accelerator would enable the company to improve the availability and performance of its applications.
AWS Global Accelerator is a service that improves the availability and performance of applications by routing traffic to the optimal AWS region for a given user, using Anycast. This improves the user experience by reducing latency and increasing the likelihood that users connect to the closest available endpoint. Additionally, Global Accelerator directs traffic to healthy endpoints in all enabled regions, providing automatic failover in case of an outage. By using Global Accelerator, the company would be able to ensure that its global customers can access its applications with the lowest possible latency, regardless of where they are located. By lowering latency and increasing the possibility that users will connect to the closest available endpoint, this enhances the user experience.
To know more about AWS kindly visit
https://brainly.com/question/29708909
#SPJ4
A group of 20 values has a mean of 85 and a median of 80. A different group of 30 values has a mean of 75 and a median of 72. What is the mean of the 50 values? What is the median of the 50 values? Find the mean and median of the values of the random variable X, whose relative frequency distribution is given in the table below.
The mean of the 50 values is 80. The median of the 50 values is 76.
What is median?
A statistical measure known as the median is used to pinpoint the data set's middle value. It is often used to measure central tendency, which is the average value in a set of data. To calculate the median, the numbers in the set must be arranged in numerical order and the middle number is identified. If the set contains an even number of numbers, the median is calculated by taking the mean of the two middle numbers. The median provides an accurate representation of the data set when there are outliers, or extreme cases, present in the data. It is also helpful when analyzing data that is not normally distributed and is often used in the field of finance.
X Relative Frequency
10 0.3
20 0.2
30 0.1
40 0.2
50 0.2
The mean of the values of X is 36. The median of the values of X is 40.
To learn more about median
https://brainly.com/question/15182342
#SPJ4
3.13 An A/D converier has an input signal range of 10 V. What is the minimum signal that it can resolve (in mV) if it is (a) a 10-bit converter, (b) an 11-bit converter?
An A/D converter is used to convert an analog signal to a digital signal. The resolution of the converter is determined by the number of bits that it uses to represent the digital signal. For 10-bit coverter, minimum signal.
What is an A/D converter and explain how the above answer is calculated?An A/D converter, short for Analog-to-Digital converter, is a device that converts an analog signal, such as a voltage or current, into a digital representation, typically in the form of a digital word.
The digital output of an A/D converter can then be processed, stored, or transmitted by a digital system. A/D converters are commonly used in electronic devices such as computers, smartphones, and scientific instruments to digitize analog signals from sensors or other sources.
They have many application such as audio and video recording, digital signal processing, and communication systems.
(a) A 10-bit converter has 2^10 = 1024 possible values. If the input signal range is 10 V, the minimum signal that it can resolve is 10 V / 1024 = 9.765 mV.
(b) An 11-bit converter has 2^11 = 2048 possible values. If the input signal range is 10 V, the minimum signal that it can resolve is 10 V / 2048 = 4.883 mV.
To know more about A/D converter visit:
brainly.com/question/19533215
#SPJ4
As a maintenance electrician, it takes you 40 minutes to rewire a motor. You have 6 motors to rewire. At that rate, how many hours will it take you to rewire the motors? 4 180 240.
Answer:
4 hours
Explanation:
40 minutes per motor x 6 motors = 240 minutes.
240 minutes / 60 minutes per hour = 4 hours.
The diagram shows a drill drift that is made from 4mm thick carbon steela) Calculate the volume of the drill drift.b)The cost of manufacturing the drill drift is calculated using the following formula:C = 4+m2 t+ntWhere C is the cost of the drill drift(s) (in dollars), m is the number of machining operations that need to be completed, t is the time taken to machine one drill drift in minutes, and n is the number of drill drifts being produced.Rearrange the formula to make t the subject.c) Calculate the time taken to machine one drill drift (n) when:C= $8 and m = 3
To calculate the volume of the drill drift of a machine, you would need to know the dimensions (length, width, and height) of the drift. Without that information, it is not possible to calculate the volume.
To rearrange the formula to make t the subject, you can use basic algebraic manipulation:
C = 4 + mt + nt
C - nt = 4 + mt
t = (C - 4) / (m + n)
To calculate the time taken to machine one drill drift (t) when C= $8 and m=3, you would substitute these values into the formula above:
t = (8 - 4) / (3 + 1)
t = 4 / 4
t = 1
So the time taken to machine one drill drift is 1 minute.
Where:
C: cost of the drill drift(s) (in dollars)
m: number of machining operations that need to be completed
t: time taken to machine one drill drift (in minutes)
n: number of drill drifts being produced
To learn more about machine, visit: https://brainly.com/question/28026400
#SPJ4
Explain the Principle of operation of 3-phase induction motor
A 3-phase induction motor operates on the principle of electromagnetic induction. It is a type of AC motor that uses three separate windings, called stator windings, which are evenly spaced around the motor's rotor.
These windings are connected to a 3-phase power source, which creates a rotating magnetic field that rotates around the stator windings.
The rotor of the motor is made of a solid metal core with conductors, called rotor windings, that are embedded inside. The rotor windings do not have a direct electrical connection, but instead, they are "induced" with current by the rotating magnetic field created by the stator windings. This induced current in the rotor creates its own magnetic field that interacts with the stator's magnetic field, causing the rotor to rotate.
The speed of the rotor is determined by the frequency of the power source and the number of stator windings. The torque of the motor is determined by the strength of the magnetic field and the rotor's speed. The torque is what causes the motor to turn and perform mechanical work.
In summary, the 3-phase induction motor works by creating a rotating magnetic field in the stator windings, which induces current in the rotor windings, creating a magnetic field that interacts with the stator's magnetic field, causing the rotor to rotate, and thus providing torque to perform mechanical work.
To learn more about induction motor, refer:
https://brainly.com/question/27680075?referrer=searchResults
A 3-phase induction motor operates on the principle of electromagnetic induction. It is a type of AC motor that uses three separate windings, called stator windings, which are evenly spaced around the motor's rotor.
What is principle operation of 3-phase induction motor?The motor's rotor is constructed of a solid metal core with embedded conductors known as rotor windings. The stator windings' revolving magnetic field induces current into the rotor windings rather than providing a direct electrical connection.
The rotor rotates because of the interaction between the magnetic fields produced by the induced current in the rotor and the magnetic field of the stator. The frequency of the power supply and the quantity of stator windings affect the rotor's speed.
As a result of current being induced into the rotor windings and a rotating magnetic field being created in the stator windings, a magnetic field that interacts with the magnetic field of the stator is created. This is how a three-phase induction motor operates.
To learn more about induction motor refer to:
https://brainly.com/question/30254210
#SPJ1
Problem 2.98
The force F has a magnitude of 80 lb and acts at the midpoint C of the thin rod. (Figure 1)
Part A
Express the force as a Cartesian vector. Express your answer in terms of the unit vectors i, j, and k. Use the 'vec' button to denote vectors in your answers. Express your answer using three significant figures.
Incorrect; Try Again; 4 attempts remaining
The force expressed as a Cartesian vector in terms of the unit vectors i, j, and k is; -34.27i + 22.85j − 68.57k
How to Interpret Cartesian Vectors?From the given diagram of the thin rod, we can write the position vectors to the points O, A, and B as;
r_o = (0, 0, 0) ft
r_a = (3, -2, 0) ft
r_b = (0, 0, 6) ft
Now, the position vector drawn to the midpoint C will be gotten by finding the average of those to A and B. This gives us;
r_c = (r_a + r_b)/2
r_c = (1.5, -1, 3) ft
The position vector that goes from C to O is expressed as;
r_co = r_o - r_c
r_co = (0, 0, 0) ft - (1.5, -1, 3) ft
r_co = (-1.5, 1, -3) ft
The magnitude of r_co would be;
|r_co| = √((-1.5)² + (1)² + (-3)²)
|r_co| = 3.5 ft
We will now divide r_co by its magnitude to produce a unit vector acting in the same direction.
u^_co = (-1.5, 1, -3) ft/3.5 ft
Thus, the force will now be;
F = 80 * (-1.5, 1, -3) ft/3.5 ft
F = (-34.27, 22.85, −68.57) lb
Writing as cartesian vector gives;
F = -34.27i + 22.85j − 68.57k
Read more about Cartesian Vectors at; https://brainly.com/question/14789472
#SPJ1
The Automotive Component Education tab includes which of the following? a. Part numbers and exploded views b. Information related to automobile components c. Technical education about automobiles d. In-depth automotive training
The Automotive Component Education tab includes information related to automobile components. Thus, the correct option for this question is B.
What is the Automotive component?The automotive component may be characterized as the automotive industry in the use of robots. They have embraced robotic technology as a means to achieve some specific tasks and functions in order to facilitate the work of individuals.
An automobile is made of several components, assemblies, and systems. The growing automotive industry has given rise to a growing auto component.
An automobile has several parts. But there are four essential components and parts of the automobile. These are Chassis, Engine, Transmission System, & Body.
Therefore, the Automotive Component Education tab includes information related to automobile components. Thus, the correct option for this question is B.
To learn more about Automobile components, refer to the link:
https://brainly.com/question/28413585
#SPJ1
A user receives this error message:
Not Secure
What is the cause?
SSL certificate is invalid or self-signed
User needs to change the URL to http:// from https://
Web server doesn't support HTTPS sites
Domain is improperly configured at the registrar
User's browser doesn't support secure websites
You are seeing the "Not Secure" warning because the website or web page you are visiting does not offer an encrypted connection, which is why. You have the option of using HTTP (insecure) or HTTPS when your Chrome browser connects to a website (secure).
Why does my website claim to not be secure?The Not Secure error most likely indicates that your site is not using the HTTPS protocol and does not have an SSL certificate. The message does not indicate that your site has been compromised or is not operating properly.
What steps must I take to secure my website?Activate SSL. Installing an SSL (Secure Sockets Layer) certificate is one of the simplest things you can do to safeguard your website, yourself, and your users.
To know more about HTTP visit :-
https://brainly.com/question/13152961
#SPJ1
What is a benefit of capacity allocation?
a. It allocates developers and testers to an initiative
b. It ensures different types of backlog items are not compared against one another
c. It assigns Architects to backlog items
d. It aligns Business Owners to the objectives
It aligns Business Owners to the objectives of the product.
What is product?
Product is a good or service that is created and made available to customers. It can be tangible, such as a physical item like a car, or intangible, such as a service like consulting. Products are typically sold in exchange for money, and are designed to meet the needs and wants of customers. Companies create products to solve problems, satisfy desires, or improve the quality of life. Products can be created from scratch, or modified from existing products or components. Companies often use product development and innovation to differentiate themselves from competitors and create a competitive advantage.
To learn more about product
https://brainly.com/question/27267260
#SPJ4
Answer:
It is D
Explanation:
That's for the challenge
Complete the analogy: cooking steps are to recipes as:
A.
a GDD is to goals.
B.
iteration is to post-production.
C.
tasks are to development checklists.
D.
calendars are to milestones.
Cooking steps are to recipes as: C. tasks are to development checklists.
What is an Analogy?The relationship between cooking steps and recipes can be seen as an analogy to the relationship between tasks and development checklists. Just as cooking steps are the individual actions that need to be taken in order to prepare a dish, tasks are the individual actions that need to be taken in order to complete a project.
Just as a recipe provides a list of steps that must be followed in a specific order in order to prepare a dish, a development checklist provides a list of tasks that must be completed in a specific order in order to complete a project.
This analogy highlights the importance of breaking down larger projects into manageable, individual steps in order to ensure a successful outcome.
Read more about analogies here:
https://brainly.com/question/24452889
#SPJ1
Three balanced Y-connected loads are installed on a balanced three-phase four-wire system. Load 1 draws a total power of 6 kW at unity PF, load 2 pulls 10 kVA at PF 0. 96 lagging, and load 3 demands 7 kW at 0. 85 lagging. If the phase voltage at the loads is 135 V and each line has a resistance of 0. 1, and if the neutral has a resistance of 1 ohm, find (a) the total power drawn by the loads; (b) the combined PF of the loads
a) Total power (real) drawn by the load is 22.6Kw and (b)The combined power factor of the loads is 0.954 lag
V^ an=135V, P^load1=6 KW, PF=1, cos θ,=1
S^load2=10kva , pf=0.96 Lagging, cosθ^2=0.96
p^load3 = 7kw , pF= 0.85 lagging, cosθ^3=0.85
p^load2=S^load2 cosθ=10kx0.96=9.6kw
a) Total power (real) drawn by the load is
p^ total=p^load1+p^load2+p^load3
=6k+9.6k+7k=22600
=22.6kw
b) For load1:
P^load1=600w , cosθ^1=1, θ^1=cos^-1(1)=0
Q^load1=S^load1 Sinθ=0
S^Load1=p^load1+jQ^load1=6K+Jo
=6kva
For load2:
p^load2=9.6kw , cosθ^2=0.96, θ^2=cos^-1(0.96)=16.26
Q^load2=S^load2 sinθ^2=10kxsin(16.26)
=2.8kVAR
S^load2=P^load2+JQ^load2=9.6k+j2.8k
=(9.6+j2.8)KVA
For load 3:
cosθ^3=0.85 ,θ^3=cos^-1(0.85)=31.79°
S^load3=p^load3/cosθ^3=7k/0.85
Q^load3=S^load3.sinθ^3=7000/0.85sin(31.79)=4.34KVAR
S^load3=p^load3+Q^load3=(7+j4.34)KVAR.
Therefore, the total complex power is
S^ total=s^load1+s^load2+s^load3
=6k+(9.6k+j2.8k)+(7k+j4.34k)
=22600+j7140
=23.7 |17.53°KVA
The combined power factor of the loads is
PF=cos(17.53°)=0.954 lag
since reactive power is positive, pf is lagging.
To learn more about loads
https://brainly.com/question/20039214
#SPJ4