Answer:
D. Contour lines.
Explanation:
The primary difference is that they show elevation in detail. Characteristics of topographic maps include: they show elevation using contour lines. Put simply, a contour line is a line which joins points of equal elevation above sea level.
True or False: The moon does not have an
atmosphere, plants, animals or oceans.
Answer:
true
Explanation:
As mentioned above, the moon does not have the same composition as the Earth, and while some of the elements present on the moon are the same, this is likely because of the moon’s formation (the Giant-Impact Theory). In general, this different in composition means that the moon cannot have an atmosphere because it is not geologically active.
One piece of matter is divided into two pieces of matter. Identify the mass of the two new pieces combined.
A. It's the same as the original piece
B. It is greater than the original piece
C. It is less than the original piece
D. It cannot be measured
PLEASE HELP!! THANK YOU
Answer:
A. It's the same as the original piece
Explanation:
The piece of matter is the same as that of the original piece.
When the mass of the two new pieces are combined, it the same as the single and whole one.
Mass is the amount of matter contained within a substance.
When the whole is broken into two and there is no mass loss, the mass is retained when they are brought together again. In most cases mass is always conserved even physical changes.3. When substances cross cell membranes by simple diffusion, they
a. squeeze between phospholipid molecules.
b. have help from channel proteins.
C. move from a higher to lower concentration.
d. two of the above
Answer:B
Explanation:due to osmosis and osmoregulation of the cell membrane
Need an answer asap plzzzzzzzzzzzzzzzzzzz!
Suppose an environmental change that causes the soil color to become much different occurs in both environments. Which of the following is true?
A.
Population 1 is more likely to adapt and survive than population 2 because there is more variation related to body color in population 1.
B.
The individuals in both populations will adapt within their lifespans to exhibit a darker body color because this will increase their ability to survive.
C.
Population 2 is more likely to adapt and survive than population 1 because there is more variation related to body color in population 2.
D.
Both populations are equally as likely to adapt and survive because both populations exhibit the same level of body color variation.
Answer: the answer is A
Explanation:
Based on the image below, what is the displacement of the sound wave for Sound A + B at 0.1025 seconds?
A. -0.3316
B.0.3316
C.0.6255
D.1.6162
Answer:
The displacement of the sound wave for Sound A + B at 0.1025 is;
D. 1.6162
Explanation:
The sum of the displacement of two sound waves is given by the principle of superposition as follows;
y(x, t) = [tex]y_m[/tex]·sin(k·x - ω·t) + [tex]y_m[/tex]·sin(k·x - ω·t + ∅)
Therefore, by the property of the superposition of waves, the amplitudes of linear waves are added linearly when they meet at the same point at a the same time
The given parameters for the wave are;
The time at which the value of the wave amplitude are given, t = 0.1025 seconds
The displacement of the sound wave A at the given time, "t" is A = 0.9739
The displacement of the sound wave B at the given time "t" is B = 0.6423
Therefore, the displacement of the sound A + B = 0.9739 + 0.6423 = 1.6162
R-0-R.
What functional group is it
hi...need help....thank you..
Answer:
36 oxygen atoms
Explanation:
From the question given above, the following data were obtained:
Compound => 4Al₂(CO₃)₃
Number of Oxygen atom in the compound =?
The number of oxygen atom in the above compound can be obtained as follow:
4Al₂(CO₃)₃
Al = 4 × 2 = 8 atoms
C = 4 × 3 × 1 = 12 atoms
O = 4 × 3 × 3 = 36 atoms
From the simple illustration made above, there are 36 oxygen atoms in the compound.
When 3243. grams of iron (III) chloride are reacted with 511.8 grams of hydrosulfuric acid, which is the limiting reactant?
2 FeCl3 + 3 H2S -----> Fe2S3 + 6 HCl
Answer:
Hydrosulfuric acid will act as limiting reactant.
Explanation:
Given data:
Mass of iron(III) chloride = 3243.0 g
Mass of hydrosulfuric acid = 511.8 g
Limiting reactant = ?
Solution:
Chemical equation:
2FeCl₃ + 3H₂S → Fe₂S₃ + 6HCl
Number of moles of iron(III) chloride:
Number of moles = mass/molar mass
Number of moles = 3243.0 g/ 162.2 g/mol
Number of moles = 20 mol
Number of moles of hydrosulfuric acid:
Number of moles = mass/molar mass
Number of moles = 511.8 g/ 34.1 g/mol
Number of moles = 15 mol
Now we will compare the moles of both reactant with products
FeCl₃ : Fe₂S₃
2 : 1
20 : 1/2 ×20 = 10
FeCl₃ : HCl
2 : 6
20 : 6/2 ×20 = 60
H₂S : Fe₂S₃
3 : 1
15 : 1/3 ×15 = 5
H₂S : HCl
3 : 6
15 : 6/3 ×15 = 30
Hydrosulfuric acid producing less number of moles of product thus, it will act as limiting reactant.
An object spinning on its axis is called
what kind of chemical bond is established in hydrochloric acid?
Answer and Explanation:
HCl, also known as hydrochloric acid, has a covalent bond. The hydrogen (H) atom shares an electron with the chlorine (Cl) to form the bond.
Please help
mg(oh)2
How many H atoms are there?
How many Mg?
What is the total number of atoms?
Answer:
There are 2 hydrogen atoms, one magnesium atom, and 5 atoms in total.
Explanation:
We are given a compound in formula form. To make things easier to understand, we can first convert this to the name of the compound.
When a compound contains one or more elements in parentheses, these are usually a polyatomic ion. Polyatomic ions are ions made up of two or more elements with a positive or negative charge over the entire ion. Commons examples of these NH₄⁺ (ammonia) and HCO₃⁻ (bicarbonate). You can combine metals with polyatomic ions to create commonly known compounds, such as baking soda. The chemical name for baking soda is sodium bicarbonate, so we can combine Na (sodium) with HCO₃⁻ (bicarbonate) and create sodium bicarbonate: NaHCO₃.This compound is one magnesium atom bonded to two hydroxide ions.
Hydroxide is the compound between one hydrogen atom and one oxygen atom. The compound overall adopts a negative charge of 1.If we have one hydrogen atom and one oxygen atom, the most electronegative atom is written first in chemical formulas. Therefore, the symbol for Oxygen (O) goes first.Then, write in the hydrogen atom directly after the O symbol: OH.Finally, since we have a negative charge on the ion, we need to play a negative sign as a superscript for the compound. Therefore, this becomes OH⁻.Now, we need to determine the charge on the Magnesium atom which is determined from the amount of valence electrons the atom has.
On a periodic table, the symbol for Magnesium is Mg and this element has 2 valence electrons. In order to fulfill the Octet Rule, the It is more likely to give up 2 electrons to a nonmetal than it is to gain 6, so we can safely assume that the charge is ²⁺.We need to use the criss-cross technique to transfer the charges between the element and the ion, so the negative 1 charge goes to the Mg, which does not appear (negative 1 or positive 1 are implied) and since the magnesium has a charge of positive 2, this is the subscript for the hydroxide ion.Therefore, our compound becomes Mg(OH)₂, and we have labeled this as magnesium hydroxide.Now, to the number of atoms:
The new charge on Mg is 1-, so there is only one atom of Mg.The charge is 2+ on the OH ion, so there are two atoms of H and two atoms of O.Two atoms of oxygen, two atoms of hydrogen, and one atom of magnesium add up to be five atoms in total.Explain in a short sentence how you can tell if a reaction is a single replacement
reaction.
Explanation:
The reaction can be said to be a single replacement reaction if one substance in a chemical reaction is replacing another one.
For example:
A + BC → AC + B
In such reactions there is a replacement of a metallic ion in solution by a metal atom higher in the activity series than the metal in solution.
The relative positions of the two elements in the activity series provides the driving force for a single replacement reaction. If one element that is to replace another in a compound is more active, the reaction will occur. If it is less reactive, there will be no reaction.
How can people conserve water at home?
rinsing dishes with cold water instead of warm water
washing dishes only when the dishwasher is full
bathing pets with a hose instead of a bucket
eating fish bought from the store
Answer:
washing dishes only when the dishwasher is full
Explanation:
Out of the following options, the best way to conserve water is:
B. washing dishes only when the dishwasher is full
Ways to conserve water:Conserving water is important because it keeps water pure and clean while protecting the environment.
Turn off the faucet while brushing your teeth.Only run the washing machine and dishwasher when you have a full load.Use a low-flow showerhead and faucet aerators.Fix leaks.Take a Shower of 5 Minutes or Less. Install a Water-saving Toilet Flush System.Thus, option B is correct.
Find more information about Water here:
brainly.com/question/5060579
How do you determine the charge of an ion?
Answer:
Subtract the number of electrons from the number of protons in an atom as a basic way of calculating the charge of the ion.
Explanation:
For example, if a sodium atom loses one electron, work out 11 - 10 = 1.
320 grams of brass released 5000 J of heat. If it has an initial temperature of 50°C, what is its temperature after releasing the heat? The specific heat capacity of brass is 376 J/kg. *
Answer:
ok:
Explanation:
We have:
[tex]q = mc\Delta T[/tex]
we know that q = -5000 J (it is negative since you release energy)
m = 320 g
and c = 376 J/kg.
We need to be careful before plugging them in. Since the units are J/kg for c, but we are talking about grams for m, we need to convert. I will just divide c by 1000 to get c = 0.376 J/g
We can now plug in:
(-5000 J) = (320 g) * (0.376 J/g) * [tex]\Delta T[/tex]
We can solve that [tex]\Delta T[/tex] = -41.5555
So the final temperature is [tex]T - \Delta T[/tex] which equals around 8.4°C.
I've decided that i still want to have some orange juice
Answer:
Oh thats great..
But I hate juice :(
Explain in a short sentence how you can tell if a reaction is a combustion reaction.
The reactants react with oxygen and there is energy formed.
Why is the sun colder in winter?
Answer:
ummm the sun isn’t colder in winter actually the sun continues to get hotter every day?
its colder in winter because were roating further away From the sun…
PLEASE HURRY
Which layer of Earth is the densest and why is that so?
A: The outer core is densest due to gravitational compression.
B: The outer core is densest due to generation of radiogenic heat.
C: The outer core is densest due to accretion.
C: The inner core is densest due to gravitational compression.
D: The inner core is densest due to generation of radiogenic heat.
Answer:
D
Explanation:
Answer: C: The inner core is densest due to gravitational compression
Explanation:
What is “rounding down”?
Answer:
if the number is 4 or less than you can round down but if it's 5 or more round up
Explanation:
It makes the number simpler by making it smaller. Ex. 34 would round down to 30, 43 would round down to 40
Lab: Ionic and Covalent Bonds
Answer:
see image
Explanation:
Answer:
hope this helps
Explanation:
How is gamma radiation produced?
Answer:
They are produced by the hottest and most energetic objects in the universe, such as neutron stars and pulsars, supernova explosions, and regions around black holes. On Earth, gamma waves are generated by nuclear explosions, lightning, and the less dramatic activity of radioactive decay.
how many atoms are in 0.340 moles of sodium
The number of atoms that are in 0.340 moles of sodium is 2.047×10²³ atoms.
What is Avogadro's number?Avogadro's number is equal to 6.022×10²³ which gives idea about the number of atoms present in one mole of any substance.
i.e. In 1 mole = 6.022×10²³ atoms
Given moles of sodium = 0.34 mol
Number of atoms of sodium in given moles will be calculated as:
No. of Na atoms = 0.34mol × 6.022×10²³ atoms/mol = 2.047×10²³ atoms
Hence required number of atoms are 2.047×10²³ atoms.
To know more about Avogadro's number, visit the below link:
https://brainly.com/question/10614569
#SPJ2
Which term is defined as the region in an atom where an electron is most likely to be
located?
1.
nucleus
2.
orbital
3.
quanta
4.
spectra
Answer:
"2.Orbital." I think
Explanation:
Risk*
Describe what happens when two negatively charged particles interact with one another. (plz help 40 points!)
Answer:
When two negatively charged particles interact with one another, the particles repel with each other. Opposite charges attract while like charges repel. A negatively charged object will exert a repulsive force upon a second negatively charged object.
Explanation:
Which statement describes a physical property to the particles that make up a material
Answer:
Gold is a relatively dense metal because its atoms have more
protons than atoms of many other metals.
Explanation:
Which of the following compounds is least soluble in water?
1) Copper (II) Chloride
2) Aluminum Acetate
3) Iron (III) hydroxide
4) Potassium Sulfate
Answer:
3) iron (iii) hydroxide
Explanation:
What kind of mixture is a solution? Name the different constituents of a solution
Answer:
homogeneous mixture
Explanation:
two or more substances
a component that dissolves and a solvent
Find the number of moles if you have 1.2 x 1048 copper atoms.
Answer:
1.993 × 10^(24) moles
Explanation:
From avogadro's number, we have that;
1 mole of atoms contain 6.022 × 10^(23) atoms
Therefore, 1.2 x 10^(48) atoms of copper will contain;
(1.2 x 10^(48) × 1)/(6.022 × 10^(23)) = 1.993 × 10^(24) moles
