Answer:
4
Explanation:
What the Best describes the purpose of the occupational safety and health administración OSHA
Technician A says that 18 gauge AWG wire can carry more current flow that 12 gauge AWG wire. Technician B says that metric wire is sized by its cross-sectional area. Who is correct? Select one: a. Both Technicians A and B O b. Neither Technician A nor B C. Technician A d. Technicain B
Answer:
Technician B
Explanation:
Both AWG and metric are sized by cross-sectional area.
Technician A is wrong: 12 gauge wire is larger diameter rated for 20 amps in free air. 18 awg is smaller diameter and typically used for speaker wiring, Class II or low voltage and sub-circuits within appliances.
Which of the following is a job title for a worker in the design and pre-construction phase of a construction project?
O carpenter
O construction superintendent
O architect
O building Inspector
Answer:
construction superintendent
Calculate the conductance of a 4.7 ohm resistor
Answer:
0.213 S
Explanation:
To calculate the conductance of an electrical component, in this case, a resistor, simply divide 4.7 into 1.
Conductance = 1 / 4.7 ohms
Conductance = 0.213 S
Cheers.
Disadvantage of metal
a team of scientists devolpe a robot that moves like a snake when controled by a remote control what kind of robot is this
1.electromechanical
2.virtual
3.autonomous
4.biological
5.swarm
Convert the improper fraction to a mixed number
18. 24/8 _____________
19. 50/12 ____________
20. 18/16 ____________
Answer:
18. 24/8 = 3
19. 50/12 = 4 and one-sixth
20. 18/16 = 1 and one-eighth
Explanation: I’m good at math
Answer:
18. 24/8 = 3
19. 50/12 = 4 and one-sixth
20. 18/16 = 1 and one-eighth
He is correct
he is good at math
How did the Ecole des Beaux Arts contribute to the development of the architect role into a profession?
The controversies at the Ecole surrounding proper architectural design attracted some of the most creative individuals in Europe,
The Ecole, for the first time anywhere in the world, provided a formalized course of study for becoming an architect
The programs of instruction at the Ecole made the study of architecture looser and less formalized,
The ideas of prominent professors at the Ecole did much to move the study of architecture forward
Answer:
B. The Ecole, for the first time anywhere in the world, provided a formalized course of study for becoming an architect
Explanation:
Ecole des Beaux-Arts was the first school of architecture established in the world. It was founded in 1671 and was located in France. Prior to this time, architects who designed buildings were simple artisans who were rated alongside skilled workers of other humble professions.
The school of fine arts which was established in France had a proper curriculum that formalized the study of architecture and made it a noble profession. The school attracted architects across Europe and America. They had series of programs and competitions which students participated in and in which winners were heavily rewarded.
A 12V electric motor has a resistance of 5k and draws 10A. How much
power does it use?
50W
60W
120W
600W
Answer:
50w
Explanation:
Why are open systems harder to study than closed systems? (Engineering and Technology)
Answer:
The reason open systems are harder to study than closed system is because an open system introduces complexities that obscures the definition of the parameters that influence the given phenomenon being studied
Explanation:
A closed system is a system that is isolated from the environment and there are no introduction or removal of any quantity or attribute to the system, while an open system is one that allows entry or exit of a quantity or a number of quantities or attributes, into and out of the system
Therefore;
A closed system is a controlled system and can therefore be easily monitored such that the effects of treatments applied to the system can be more accurately measured
For an open system, however, the number of variables inputs that results in the outputs of the system are more or less partly controlled, thereby limiting the precision and accuracy of the conclusions drawn from the experimental observations.
How do the Holland Codes help individuals make career choices?
The codes identify the educational requirements of various professions.
The codes match personality types to career and education choices.
The codes specify the career paths open in various professional fields.
The codes match physical skills to work requirements.
2 is correct good job
3. Which of the following is an example of qualitative data?
mass
length
number of items
color
Answer:
Number of Items
Which professional draws maps and plans for projects involving structures other than buildings, such as bridges?
an architect
an architectural drafter
a civil drafter
an interior designer
Answer:
c
Explanation:
9. A flashing red traffic signal at an intersection has the same requirements as:
A slow sign.
A yield sign.
A stop sign.
An intersection sign.
The first wheel wasn't used for transportation. The wheel was first invented as a potter's wheel and was believed to have existed around 3500 BC. The wheel was used as a luxurious form of transportation for the wealthy, but was also used for irrigation, pottery making, and milling. The invention of the chariot and other important innovations in history were based on the invention of the wheel. The Mesopotamians built the first of wheel with steel and iron. O Because the wheel was round Mesopotamians used it on bikes O The wheel was used for irrigation, pottery making, and milling. O The Mesopotamians could not get the wheel to fit on chariots.
Answer:they did not create it but was used against them and took the idea by the other people and did not use it for water wheels
Explanation:
True or False Less than one amp of electrical current can kill. Always take precautions when working around electricity
Answer:
true
Explanation:
0.007 amps (7mA) across the heart for three seconds is enough to kill
what is signal processing
Answer:
Signal processing is an electrical engineering subfield that focuses on analysing, modifying, and synthesizing signals such as sound, images, and scientific measurements.
Explanation:
Answer:
if you have a drop down menu...
1.electrical
2.analog
3.digital....
Explanation:
look at the picture for details
Which device assists with medical imaging?
A.
ultrasonic flow sensor
B.
ultrasound machine
C.
digital micrometer
D.
piezoelectric pressure gauge
Answer:
B. Ultrasound machine
Answer:
what the problem i can help you
Explanation:
How does the map scale help to interpret the map?
It shows how important silk was to European traders.
It shows why the Silk Road was important only to China.
It helps the reader understand how far traders had to travel.
It shows the reader the difficult conditions on the Silk Road.
Answer: it C 110%
Explanation:
Answer:
its c!
Explanation:
basic knowledge
A fuel system cleaning may help with:
Which of the following best distinguishes between superficial design improvements and functional
design improvements?
They are both similar, but different types of engineers use different terminology.
Superficial design improvements are created from scratch, while functional design
improvements are generated from existing structures or items, costing less money overall.
Superficial design improvements are typically only trivial changes to a design, while functional
design improvements can change the way a product or process is used to significantly
enhance performance.
Superficial improvements are implemented by individuals who are not engineers, while
functional design improvements are created by fully certified Professional Engineers.
Answer:
Superficial design improvements are typically only trivial changes to a design, while functional design improvements can change the way a product or process is used to significantly enhance performance.
Explanation:
As a PC board designer, I would sometimes spend a certain amount of time making traces have shorter routes, or fewer layer changes or bends. (I wanted to make the layout "pretty.") In some cases, these changes are superficial, affecting the appearance only. In some cases, they are functional, reducing crosstalk or emissions or susceptibility to interference.
I deal with a web site that seems to be changing all the time (Brainly). In many cases, the same information is rearranged on the page—a superficial change. In other cases, the information being displayed changes, or the way that certain information is accessed changes. These are functional changes. (Sometimes, they "enhance performance," and sometimes they don't, IMO.)
In short ...
Superficial design improvements are typically only trivial changes to a design, while functional design improvements can change the way a product or process is used to significantly enhance performance.
Answer:
The answer for mine is B but be careful it changes.
Explanation:
Superficial design improvements are typically only trivial changes to a design, while functional design improvements can change the way a product or process is used to significantly enhance performance.
Superficial design improvements are typically only trivial changes to a design, while functional design improvements can change the way a product or process is used to significantly enhance performance.
(5x - 5)°
(2x + 10)°
Find the value of x.
Answer: you mean this (5x-5)=(2x+10)right ? if yes X=5
Explanation:
what it the biggest car in the wrld
Answer:
so the 2 buggest cars in the world are the american dream in honor of the american dream dusty rhodes nd the dumpturuck so see which one is biggest
Explanation:
Environmental assessments (EAs) are an important component of any civil engineering project. Delgado Engineering has been contracted to design and assess a multibillion-dollar urban rail center in a city, which is divided in the middle by a river. The center will be built on a previously unused island in the center of the river. For each of the four types of civil engineers (construction engineer, geotechnical engineer, structural engineer, transportation engineer), explain why they should be involved in the project—or why they would not be relevant to the project—and what their role would be. Then describe how the EA would proceed, including what might be included in the environmental impact assessment process, such as the use of geographic information systems. Finally, explain what might be in the environmental impact statement or why you think there may be a finding of no significant impact.
The activities of each of the 4 types of civil engineers are;
Explained in the answer below
Construction ActivitiesThe roles of the four types of civil engineers for the urban rail center are;
1) Geotechnical Engineers; These engineers are responsible for testing the capacity of the soil to safely carry the building load. In cases where the soil is too weak or doesn't meet the engineering requirement for the project, these engineers could carry out soil improvement techniques or even recommend a deep foundation.
2) Structural Engineer; The structural engineer is responsible for ensuring that the structure is safe for it's intended use and that structural members of the structure are designed in such a way that all the load of the structure is safely transmitted to the ground without uneven settlement.
3) Construction Engineer; The construction engineer is the one that is responsible for implementing the working drawings of the urban center through thorough daily supervision of all the construction works.
4) Transport Engineer; The transport engineer is very important because he is the one to carry out traffic studies and come up with a transport design solution that is effective in gaining safe and smooth access to the proposed new urban rail center.
When we talk of Environmental Impact Assessment in Construction works, we are referring to the impact of the construction work on the immediate environment.
Now, in an unused island they will definitely make use of shallow foundations and also make use of a lot of sand which will require lots of dredging from water.
Thus, the EIA will need to be done to know the impact of the vibrations from the drilling of piles and also the effect of the excess dredging that will be required to fulfill the capacity of the sand needed for the construction.
Read more about construction activities at; https://brainly.com/question/15795291
When encountering low visibility from rain or fog, you should use your ____.
A. high beams and fog lights
B. low beams and fog lights
C. high beams and low beams
D. low beams and hazard lights
Answer:
B
Explanation:
Low beams should only be used when fog and rain is present, as high beams can cause a dangerous glare to you and other drivers. You should also use your fog lights, but not every vehicle has them.
B.
Explanation:I just took the test and it is in fact correct! Hope this helped and have a good one!
Random Photo of the dayWhat is electromagnetic induction?
The regulated voltage of an alternator is stated as 13.6 to 14.6 volts at 3000 rpm with the
headlamps on. This would indicate that the tolerance is:
a)13.6 volts
b)2.6 volts
c1.6 volts
d)1 volt
Answer:
d) 1 volt
Explanation:
The allowable range is 1 volt. The allowed tolerance (deviation from nominal) depends on what the nominal voltage is.
how code sould I use to make a robtic arm move
adam use r/right/follow._10(inches)speed/2
Which investigative process is most helpful for learning about past societies?
using historical inquiry
collecting artifacts
using the scientific method
studying foreign languages
Answer: think it A
Explanation: makes
Answer:
using the scientific method
Explanation:
Please mark me as brainliest
Which element of Miranda's character is best illustrated by this excerpt?
If by your art, my dearest father, you have
Put the wild waters in this roar, allay them,
...0, I have suffered
With those that I saw suffer: a brave vessel,
Who had, no doubt, some noble creature in her,
Dash'd all to pieces.
A. She plays the victim
O B. She is compassionate,
O C. She seeks revenge.
O D. She is easily fooled,
SUBMIT
Answer: b
Explanation:
The element of Miranda's character which is best illustrated by this excerpt is that she is compassionate. Thus, option B is correct.
What are the main characters of Miranda?Miranda has been emotionally affected by all that has happening or seems to the suspect that his father has "art", (magic or supernatural powers) and that he was the one who has been created the terrible storm that was doing great harms to the people.
The ships, as well as she continues just by asking him to put an end to it, which has demonstrates Miranda's position toward his father, she does not talk out of the full fear, submission or the confusion, but of determination. She has asks for the straightforward thing: "to allay the waters".
We must or we can see that the Miranda has been telling her father everything that she thinks about what has happened to the sinking ship as well as the people who were on it. She demonstrates all of her concern for this ship, what she would have liked to have happened and what she would do if she could avoid this tragedy.
Thus, option B is correct.
Learn more about tragedy on:
https://brainly.com/question/1327439
#SPJ7