Answer:
62.29 moles
Explanation:
See attached image
Which statements are true of solutions? They contain solutes and solvents. They always have only one solute per solvent. Their particles must be evenly distributed. They are homogeneous matter. They are pure.
The solution contains solute and solvents, have evenly distributed particles, are homogenous and can include solid, gas and liquid in them together.
What are the solutions?The homogenous substance composed of a mixture of two or many substances in it is called a solution. The solute is the substance that can be liquid, solid or gas that gets dissolved in it.
The solvent is another substance in which the solute gets dissolved to produce a solution. The particles of the solute and the solvent are evenly dispersed in the solution.
Therefore, the solution is a homogenous mixture.
Learn more about solutions here:
https://brainly.com/question/12213603
Answer:
A. They contain solutes and solvents.
C. Their particles must be evenly distributed.
D. They are homogeneous matter.
Question 2:
Which statements are true of heterogeneous mixtures? Check all that apply.
They settle out.
They exhibit the Tyndall effect.
Their solutes and solvents appear as one.
They exhibit Brownian motion.
They are evenly distributed mixtures.
Answer:
A. They settle out.
B. They exhibit the Tyndall effect.
D. They exhibit Brownian motion.
Explanation:
edge, have a lovely day <3
A chemist burns 650.0 g of C4H8S2 in excess oxygen, according the following balanced chemical reaction:
C4H8S2+ 902 -> 4CO2 + 4H2O +2S03
If the chemist has 92.2% yield, how many grams of SO3 were produced?
Answer:
952.2g SO3
Explanation:
Molar mass of C4H8S2 is 120.2363 g/mol
Mol in 750.0g = 750.0/120.2363 = 6.238 mol
1mol C4H8S2 produces 2 mol SO3
6.238 mol will produce 2×6.238 = 12.476 mol SO3
Molar mass SO3 = 32+3×16 = 80.0g/mol
Theoretical yield = 12.476×80.0 = 998.08g
The actual yield is 95.4%
Actual mass-produced = 95.4/100×998.08 = 952.2g SO3 produced
Hope it will help you.
1. Identify the correct product to the following reactants.
HCI + NaOH->
a. NaH + COOH
b. NaCl + H2O
C. NaCl(OH)
When 15 gram Calcium oxide is treated with 2ogram nitric acid then limiting reactant find. What mass of calcium nitrate is formed?
Explanation:
Without even doing any calculations I would say that the 20 g HNO3 is limiting
But let us check if my opinion is correct
Balanced equation:
CaO(s) + 2HNO3 (aq) → Ca(NO3)2 (aq) + H2O(l)
1 mol CaO reacts with 2 mol HNO3
Molar mass CaO = 56 g/mol
Mol CaO in 615 g = 615 g / 56 g/mol = 10.98 mol
This will react with 10.98 * 2 = 21.96 mol HNO3
Molar mass HNO3 = 63 g/mol
Mol HNO3 in 20 g = 20 g / 63 g/mol = 0.317 mol
Clearly - my original idea correct - HNO3 is limiting .
The reaction stoichiometry can be used to determine the precise quantity of reactant that will be required to react with another element. The limiting agent is determined by the mole ratio rather than the mass of the reactants. Here the mass of calcium nitrate formed is 16.82 g.
What is limiting reagent?Reagents that are entirely consumed by a chemical reaction are known as limiting reagents. They are additionally known as limiting reactants or limiting agents. A predetermined quantity of reactants are necessary for the reaction to be completed, according to the stoichiometry of chemical reactions.
The limiting reactant determines the maximum amount of product that can be formed from the reactants when reactants are not present in stoichiometric quantities.
Here the equation is:
CaO + 2HNO₃ → Ca (NO₃)₂ + H₂O
'n' of CaO = 15 / 56 = 0.267 mol
n of HNO₃ = 20 / 63 = 0.317 mol
1 mol of CaO 2 moles of HNO₃
0.267 mol = 0.267 × 2 = 0.534 mol
So HNO₃ is the limiting reactant.
0.267 mol CaO gives 0.267 mol Ca (NO₃)₂
Mass of HNO₃ = 0.267 × 63.01 = 16.82 g
To know more about limiting agent, visit;
https://brainly.com/question/29505468
#SPJ2
A force of 3000N is applied on a 20kg ball. Find the acceleration of the ball
Answer:
force = 3000N
mass= 20 kg
now
F= ma
3000= 20×a
3000÷20=a
a=15
F= ma by newtons second law of motion
How many grams of naoh are needed to prepare 546 ml of solution with a ph of 10. 00?.
Answer:
1. determining the pOH of the solution from the given pH of 10.00 assuming the solution is at 25° C.
Britney added 0.05 moles of copper(II) nitrate solution to 0.1 moles of sodium hydroxide solution and
observed the reaction below.
Cu(NO), + 2 NaOH -- Cu(OH), + 2 NaNO,
She collected 4.1 grams of copper hydroxide precipitate from the reaction. What was the percent yield of
copper hydroxide?
The percent yield of copper hydroxide is 84%
StoichiometryFrom the question, we are to determine the percent yield of copper hydroxide
First, we will determine the theoretical mass
From the given balanced chemical equation, we have
Cu(NO₃)₂ + 2NaOH -- Cu(OH)₂ + 2NaNO₃
This means,
1 mole of copper(II) nitrate reacts with 2 moles of sodium hydroxide to produce 1 mole of copper hydroxide
Therefore,
0.05 mole of copper(II) nitrate reacts with 0.1 mole of sodium hydroxide to produce 0.05 mole of copper hydroxide
The theoretical number of moles of copper hydroxide that is produced is 0.05 mole
Now, for the theoretical mass
Using the formula,
Mass = Number of moles × Molar mass
Molar mass of copper hydroxide = 97.56 g/mol
Then,
Theoretical mass = 0.05 × 97.56
Theoretical mass of copper of hydroxide produced is = 4.878 g
Now, for the percent yield of copper hydroxide
Percent yield is given by the formula,
[tex]Percent\ yield = \frac{Actual\ yield}{Theoretical\ yield} \times 100\%[/tex]
Then,
[tex]Percent\ yield\ of\ copper\ hydroxide= \frac{4.1}{4.878}\times 100\%[/tex]
[tex]Percent\ yield\ of\ copper\ hydroxide= 84\%[/tex]
Hence, the percent yield of copper hydroxide is 84%.
Learn more on Stoichiometry here: https://brainly.com/question/9372758
Question 3 of 25
Which of these elements has the smallest atomic radius?
A. Ge
B. Se
C. As
D. Br
Answer:
I thinks it Br hope this helps
What shape has the largest area to perimeter ratio.
What are the 4 nitrogen bases in DNA? RNA?
Answer:
adenine, cytosine, uracil, and guanine.
Answer:
For DNA there is Adenine (A), Thymine (T), Guanine (G), and Cytosine (C)
For RNA there is Adenine (A), Uracil (U), Guanine (G), and Cytosine (C)
Explanation:
Which materials are made with specialized molecules that act like a lock and key? (1 point)
liquid crystal displays
pharmaceuticals
metal frames on cars
fiber optic cables
Answer:
pharmaceuticals
Explanation:
pharmaceuticals
The answers to this quick check are as follows:
1.B- one made of a different metal that will not rust
2.B- It is made of polymers that are very flexible.
3.D- the ability to reflect electromagnetic waves
4.B-The atoms can slide past each other while still remaining attracted to each other electrically.
5.B-pharmaceuticals
Please leave a heart and rate 5 stars Pls and If you want more, Go to my document. it is in comments
What part of a plant contains the gametes?
A. Stem
B. Leaf
C. Flower
D. Root
2. Which part of a flower below are both male reproductive structures?
A. Stigma and style
B. Style and ovary
C. Anther and filament
D. Stigma and anther
3.
What is the part of a flower that produces the male reproductive cells (pollen)?
A. Anther
B. Stigma
C. Style
D. Ovule
4. Brightly colored parts of flowers that attract insects are called?
A. Petals
B. Pistils
C. Sepals
D. Stamens
5.
What part of the flower will turn into a seed if fertilized by a pollen grain?
A. Ovary
B. Stigma
C. Stigma
D. Pollen
6. What part of a flower turns into fruit around a fertilized seed?
A. Ovary
B. Ovule
C. Stigma
D. Pollen
7. Which part of the plant collects/absorb water?
A. Leaves
B. Flowers
C. Roots
D. Stems
8.
What is the root's function in a plant?
A. Absorb water and sunlight
B. Give off oxygen
C. Make sugar and absorb water
D. Anchor the plant to ground and absorb water
9. What part of the plant makes food by photosynthesis?
A. Leaves
B. Flowers
C. Roots
D. Stems
10. Which of the following is the correct sequence in the image below, for pollination from
beginning to end?
A. ACBDFE
C. ABCDEF
B. CBDAFE
D. CBDFEA
Answer:
7.C or D not sure
Explanation:
its just a opinion :3
The electron geometry of carbon dioxide is...
1.tetrahedral
2.linear
3.planer
NEED ANSWER ASAP!!!!! 55 POINTS
8. Which elements are recycled during the processes of photosynthesis and cellular respiration?
oxygen, hydrogen, and nitrogen
carbon, nitrogen, and oxygen
carbon, hydrogen, and
oxygen
Answer:
The four substances recycled during photosynthesis and respiration are carbon dioxide, water, oxygen, and glucose.
So because you don't have all these choices, just pick, carbon, hydrogen, and oxygen, which is the last answer.
Thanks!
Mark me brainliest!
~[tex]MiniMeteorologist\\[/tex]~
Answer:
carbon hydrogen and oxygen
Explanation:
The ka of hydrofluoric acid (hf) at 25. 0 °c is 6. 8 × 10-4. What is the ph of a 0. 25 m aqueous solution of hf?.
Answer:
HF <==> H+ + F-
Ka = 6.8x10-4 = [H+][F-] / [HF]
6.8x10-4 = (x)(x) / 0.25 - x (assume x is small relative to 0.25 and ignore it to avoid using quadratic)
6.8x10-4 = x2 / 0.25
x2 = 1.7x10-4
x = 1.3x10-2 M (this is ~ 5.2% of 0.25 so our assumption above was not valid. We must use quadratic)
6.8x10-4 = x2 /0.25 - x
1.7x10-4 - 6.8x10-4 x = x2
Use quadratic to find x = 0.0127 M = [H+]
pH = -log H+ = -log 0.0127
pH = 1.90 so answer is probably 1.88(B)
Explanation:
Have a great day ahead" :)
The electrophilic bromination or chlorination of benzene requires ______ along with the halogen.
The electrophilic bromination or chlorination of benzene requires Lewis acid along with the halogen.
What is bromination of benzene?The bromination or chlorination of benzene is an example of an electrophilic aromatic substitution reaction.
During the reaction, the bromine forms a sigma bond to the benzene ring, yielding an intermediate. Subsequently a a proton is removed from the intermediate to form a substituted benzene ring.
This reaction is achieved with the help of Lewis acid as catalysts.
Thus, the electrophilic bromination or chlorination of benzene requires Lewis acid along with the halogen.
Learn more about bromination of benzene here: https://brainly.com/question/26428023
Which property makes the materials used in fiber optic cables so useful? (1 point)
malleability
the ability to conduct heat
high density
the ability to reflect electromagnetic waves
The property makes the materials used in fiber optic cables is:
C. High density
Fiber optic cables:They transfer data signals in the form of light and travel hundreds of miles significantly faster than those used in traditional electrical cables. Fiber is immune to electrical interference. There is no cross - talk between signals in different cables and no pickup of environmental noise. Information traveling inside the optical fiber is even immune to electromagnetic pulses generated by nuclear devices.
Thus, correct option is C.
Find more information about Fiber optic cables here:
brainly.com/question/116766
Why does the chance of precipitation increase when the humidity is high?
Because the amount of moisture in the air increases as precipitation falls
Because the amount of moisture in the air decreases as humidity increases
Because the high humidity causes the air to hold more moisture
Because the amount of water vapor in the air increases
Answer:Because the amount of water vapor in the air increases
Explanation:In humid climates, thunderstorms often cause heavier rain than general wintertime rainfall since moisture content in the air typically is higher in the spring and summer, and since air usually rises at a much more rapid rate within developing thunderstorms than in general winter systems.During very heavy rainfall, where all of the water in the atmosphere is often rained out, the water vapour content governs the amount of rainfall. The higher the humidity the greater the water vapour, and the more rain we're likely to see. HOPE THIS HELPS ^w^
A balanced chemical equation is a direct presentation of the ___________.
Answer:
The chemical equation needs to be balanced so that it follows the law of conservation of mass. A balanced chemical equation occurs when the number of the different atoms of elements in the reactants side is equal to that of the products side.
Explanation:
How do you balance equations?
In general, however, you should follow these steps:
1. Count each type of atom in reactants and products.
2. Place coefficients, as needed, in front of the symbols or formulas to increase the number of atoms or molecules of the substances.
3. Repeat steps 1 and 2 until the equation is balanced.
What is the mass of an object that is moving at 8.0 m/s and has 70.0 J of kinetic energy?
Explanation:
[tex]ke = \frac{1}{2} \times m \times {v}^{2 } \\ m = \frac{2 \times ke}{ {v}^{2} } \\ m = \frac{2 \times 70.0}{ {8}^{2} } \\ m = \frac{140}{64} = 2.1875[/tex]
Hope its clear,
have a wonderful day♡♡
If Sara was planning a wedding and wanted to have a sculpture of a heart made of
butter at the reception, describe how Sara could test the temperature range at
which the heart would remain a solid.
Answer:
check the Ac so ya so ya so ya so ya so ya so ya
Answer:
Butter stored in a refrigerator is a solid. Sara should put a thermometer in the refrigerator for an hour and record this temperature.
Which microscopic detail affects the strength of different forms of silk? (1 point)
O Different types of silk are in long strands or in other very different arrangements.
O Different silk strands are made with different types of atoms.
O Different types of silk do not have the same strength if they come from different sources.
O Different silk strands have different combinations of amino acids.
Answer:
Different types of silk do not have the same strength if they come from different sources.
Explanation:
Different Spiders will gave different webs. I hope this helps <3
Answer:
Different silk strands have different combinations of amino acids.
Ctab, the surfactant used in this experiment does not dissolve in hexane. Why not?.
The surfactant does not dissolve in hexane due to its polar nature.
Why the surfactant does not dissolve?The surfactant used in this experiment does not dissolve in hexane because hexane is non-polar solvent whereas the surfactant is polar in nature and we know that polar solutes only dissolve in polar solvent so we can conclude that the surfactant does not dissolve in hexane due to its polar nature.
Learn more about hexane here: https://brainly.com/question/24574179
A human lung at maximum capacity has a volume of 3. 0 liters. If the partial pressure of oxygen in the air is 21. 1 kilopascals and the air temperature is 295 K, how many moles of oxygen are in the lung?.
The ideal gas equation gives the relation of the pressure and the volume of the gas with that of the moles and the temperature. Moles of oxygen in the lung are 0.026 moles.
What is the ideal gas equation?The ideal gas equation states that moles of the substances are directly proportional to the pressure and volume but inversely to the temperature of the hypothetical gas.
The ideal gas equation can be given as,
[tex]\rm PV = nRT[/tex]
Where,
Volume or the lung capacity (V) = 3.0 L
Pressure of the lungs (P) = 0.208 atm
Gas constant (R) = 0.082057
Temperature of the air (T) = 295 K
Substituting values in the equation:
[tex]\begin{aligned}\rm n &= \rm \dfrac{PV}{RT}\\\\&= \dfrac{0.208 \times 3.0}{0.082057\times 295}\\\\&= 0.026 \;\rm moles\end{aligned}[/tex]
Therefore, the number of the moles of the oxygen in lungs are 0.026 moles.
Learn more about moles here:
https://brainly.com/question/13909347
Calculate the number of grams of xenon in 4.811 g of the compound xenon tetrafluoride.
Explanation:
Mass of xenon tetrafluoride = 4.658 g
To determine the number of grams of xenon in 4.658 grams of the compound xenon tetrafluoride:
The chemical formula for xenon tetrafluoride is XeF_4XeF
4
Molar mass of XeF_4XeF
4
= 207.28 g/mol
Molar mass of xenon = 131.29 g/mol
First of all, we would calculate the number of moles of XeF_4XeF
4
.
\begin{gathered}Number\;of\;moles = \frac{mass}{molar\;mass}\\\\Number\;of\;moles = \frac{4.658}{207.28}\end{gathered}
8. Acid rain has a pH of 4. Is acid
rain a stronger or weaker acids?
Answer:
Acid rain is a stronger acid.
General Formulas and Concepts:
Acids/Bases
Explanation:
We are given that acid rain has a pH = 4.
We know that the lower the pH number, the more acidic it becomes. The higher the pH number, the more basic is becomes.
Therefore, the lower the pH scale number, the stronger the acid. Typically, the pH scale generally ranges from pH 1 to pH 14.
Comparing pH of 4 in the scale from 1 - 14, it would be a strong acid.
Topic: AP Chemistry
Unit: Acids/Bases
someone please answer this i need help i’ll give brainly.
how many atoms of carbon of 8 molecules of C2H2
Answer:
16
Explanation:
2 per molecule X 8 molecules in total
Answer please :) really needed
I really struggle in science and I am doing a check and Ive seem to kinda? "forgot" hahah-
Answer:
1) Since they are both negatively charged they start to push each other away to go pair with positively charged ions. 2) These oppositely charged ions attract each other to form ionic networks (or lattices). Electrostatics explains why this happens: opposite charges attract and like charges repel. When many ions attract each other, they form large, ordered, crystal lattices in which each ion is surrounded by ions of the opposite charge. 3) Metals form positive ions (cations). A magnesium atom must lose two electrons to have the same number of electrons as an atom of the previous noble gas, neon. Thus, a magnesium atom will form a cation with two fewer electrons than protons and a charge of 2+. 4) Nonmetals form negative ions (anions). A nitrogen atom must gain three electrons to have the same number of electrons as an atom of the following noble gas, neon. Thus, a nitrogen atom will form an anion with three more electrons than protons and a charge of 3−.
Explanation:
Hope this helped.
A brainliest is always appreciated.
What is the law of fossil succession?:
(8th Grade Science)
(Earth History)
(Layers & Layers of Rocks)
Different Fossil organisms succeed one another to go up through the different rock layers in a definite and determinable order. Therefore, any time period can be recognized by its fossil content
Explanation:
Different Fossil organisms succeed one another to go up through the different rock layers in a definite and determinable order. Therefore, any time period can be recognized by its fossil content