( I will give a brainliest )
What must be changed, temperature or heat energy, during condensation?

Answer:

6.45×10¯²⁶ J

Explanation:

From the question given above, the following data were obtained:

Frequency (f) = 97.3 MHz

Energy (E) =?

Next, we shall convert 97.3 MHz to Hz. This can be obtained as follow:

1 MHz = 1×10⁶ Hz

Therefore,

97.3 MHz = 97.3 MHz × 1×10⁶ Hz / 1 MHz

97.3 MHz = 9.73×10⁷ Hz

Thus, 97.3 MHz is equivalent to 9.73×10⁷ Hz.

Finally, we shall determine the energy at which the frequency is broadcasting. This can be obtained as follow:

Frequency (f) = 9.73×10⁷ Hz

Planck's constant (h) = 6.63×10¯³⁴ Js

Energy (E) =?

E = hf

E = 6.63×10¯³⁴ × 9.73×10⁷

E = 6.45×10¯²⁶ J

Therefore, the energy at which the frequency is broadcasting is 6.45×10¯²⁶ J

Answer:

See the answers below

Explanation:

To solve this problem we must use the definition of power and work in physics.

a)

The function of the conveyor belt is to carry the boxes from an initial point that is at low altitude to an end point that is at high altitude. In this way the conveyor belt prints a speed to the box to be able to raise it to the required vertical distance.

Since we have a velocity at the beginning and then we place the box at a high position, where then the box remains at rest, we can say that it converts kinetic energy to potential energy.

b)

Power is defined as the relationship of work over time. Therefore we have:

[tex]P=W/t[/tex]

where:

P = power = 3.8 [kW] = 3800 [W]

W = work [J]

t = time = 14 [s]

[tex]W=P*t\\W=3800*14\\W= 53200[J] = 53.2[kJ][/tex]

c)

Since the given time is equal to the given time at Point b, we can use the same work calculated.

We know that work is defined as the product of force by the distance traveled.

[tex]W =F*d[/tex]

So, the force is equal to:

[tex]F=W/d\\F=53200/5.3\\F=10037.73[N][/tex]

Now we know that force is defined as the product of mass by gravitation acceleration.

[tex]F =m*g[/tex]

where:

F = force or weight = 10037.73 [N]

g = gravity acceleration = 9.81 [m/s²]

m = mass [kg]

[tex]m=F/g\\m = 10037.73/9.81\\m = 1023.2 [kg][/tex]

d)

This part can be solved by means of the energy conservation theorem, where the potential energy is transformed into kinetic energy or vice versa.

[tex]E_{pot}=m*g*h = E_{kin}=0.5*m*v^{2}[/tex]

where:

h = elevation = 4.7 [m]

v = velocity [m/s]

[tex]m*g*h=0.5*m*v^{2}\\g*h=0.5*v^{2} \\v=\sqrt{\frac{g*h}{0.5} } \\v=\sqrt{\frac{9.81*4.7}{0.5} } \\v = 9.6 [m/s][/tex]

The force acts on this bullet : 4.8456 N

Given

m=0.09 kg

Δt=0.025 s

vo=0(from rest)

vt=1.346 m/s

Required

Force

Solution

Impulse is a change in momentum

I=ΔP

F.Δt=m(vt-vo)

Input the value

F x 0.025 = 0.09(1.346-0)

F=4.8456 N

Answer:

c)X= Vo(t)+1/2at^2

Explanation:

From the question we are told that

initial speed u=10.4

displacement d= 39

time t=3.3s

accelaration a=?

Generally the best equation in solving for Acceleration is given to be

X= Vo(t)+1/2at^2

Mathematically

     [tex]X= Vo(t)+1/2at^2[/tex]

     [tex]39=10.4t+\frac{a}{2} *3.3^2[/tex]

     [tex]5.445a=39-34.32[/tex]

     [tex]a=39-34.32/5.445[/tex]

     [tex]a=4.68/5.445[/tex]

     [tex]a=0.86m/s^2[/tex]

Answer:

v= 17.15 m/s

Explanation:

mass of the book=0.1 Kg

height above ground, h= 15 m

Using conservation of energy

Potential energy is converted into kinetic energy

[tex]mgh = \frac{1}{2}mv^2[/tex]

[tex]v=\sqrt{2gh}[/tex]

[tex]v=\sqrt{2\times 9.8\times 15}[/tex]

[tex]v=\sqrt{294}[/tex]

v= 17.15 m/s

Hence, the book will hit the ground at the speed of 17.15 m/s.

Answer:

Noise does not affect the digital signal, making it more reliable.                               This information is transmitted digitally, making it more reliable

Explanation:

Just did it on Ape.x

This information is transmitted digitally, making it more reliable. Noise does not affect the digital signal, making it more reliable. The correct options are B and D.

The transfer and reception of data in the form of a digital bitstream or a digitized analogue signal transmitted through a point-to-point or point-to-multipoint communication channel is known as data transmission and reception, or, more broadly, data communication or digital communications.

Because digital switching systems are substantially less expensive than analogue switching systems, digital transmission is used to achieve high reliability.

However, the analogue signals that make up the majority of speech, radio, and television must be used for digital transmission.

This information is more dependable because it is conveyed digitally. The digital signal is unaffected by noise, increasing its dependability.

Thus, B and D are the correct options.

For more details regarding digital transmission, visit:

https://brainly.com/question/29393615

#SPJ5

Answer:

12 N/cm²

Explanation:

From the question given above, the following data were obtained:

Weight (W) of block = 240 N

Area (A) = 20 cm²

Pressure (P) =?

Next, we shall determine the force exerted by the block. This can be obtained as follow:

Weight (W) of block = 240 N

Force (F) =.?

Weight and force has the same unit of measurement. Thus, we force applied is equivalent to the weight of the block. Thus,

Force (F) = Weight (W) of block = 240 N

Force (F) = 240 N

Finally, we shall determine the pressure on the floor as follow:

Force (F) = 240 N

Area (A) = 20 cm²

Pressure (P) =?

P = F/A

P = 240 / 20

P = 12 N/cm²

Therefore, the pressure on the floor is 12 N/cm².

Answer:

5 newtons

Explanation:

Just divide them

Answer:

The building is 176.4 meters high.

Explanation:

We use the formula for kinematics of an accelerated object (in this case acceleration of gravity):

Distance travelled = 1/2 g  t^2

Distance travelled = 1/2 9.8  (6)^2 = 176.4 meters

Answer:

[tex]\frac{y}{L}[/tex] = 0.66

Hence, the fraction of the length of the rod above water = [tex]\frac{y}{L}[/tex] = 0.66

and fraction of the length of the rod submerged in water = 1 - [tex]\frac{y}{L}[/tex] = 1 - 0.66 = 0.34  

Explanation:

Data given:

Density of the rod = 5/9 of the density of the water.

Let's denote density of Water with w

And density of rod with r

So,

r = 5/9 x w

Required:

Fraction of the length of the rod above water.

Let's denote total length of the rod with L

and length of the rod above with = y

Let's denote the density of rod = r

And density of water = w

So, the required is:

Fraction of the length of the rod above water = y/L

y/L = ?

In order to find this, we first need to find out the all type of forces acting upon the rod.

We know that, a body will come to equilibrium if the net torque acting upon a body is zero.

As, we know

F = ma

Density = m/v

m = Density x volume

Volume = Area x length = X ( L-y)

So, let's say X is the area of the cross section of the rod, so the forces acting upon it are:

F = mg

F = (Density x volume) x g

g = gravitational acceleration

F1 = X(L-y) x w x g (Force on the length of the rod submerged in water)

where,

X (L-y) = volume

w = density of water.

Another force acting upon it is:

F = mg

F2 =  X x L x r x g

Now, the torques acting upon the body:

T1 + T2 = 0

F1 ( y + [tex](\frac{L-y}{2})[/tex] ) g sinФ - F2 x ([tex]\frac{L}{2}[/tex]) x gsinФ = 0

plug in the  equations of F1 and F2 into the above equation and after simplification, we get:

[tex](L^{2} - y^{2} ) . w[/tex] = [tex]L^{2}[/tex] . r

where, w is the density of water and r is the density of rod.

As we know that,

r = 5/9 x w

So,

[tex](L^{2} - y^{2} ) . w[/tex] = [tex]L^{2}[/tex] . 5/9 x w

Hence,

[tex](L^{2} - y^{2} )[/tex] = [tex]\frac{5L^{2} }{9}[/tex]

[tex]\frac{L^{2} - y^{2} }{L^{2} }[/tex] = [tex]\frac{5}{9}[/tex]

Taking [tex]L^{2}[/tex] common and solving for [tex]\frac{y}{L}[/tex], we will get

[tex]\frac{y}{L}[/tex] = 0.66

Hence, the fraction of the length of the rod above water = [tex]\frac{y}{L}[/tex] = 0.66

and fraction of the length of the rod submerged in water = 1 - [tex]\frac{y}{L}[/tex] = 1 - 0.66 = 0.34

Answer:

See the answer below

Explanation:

To solve this problem we must use the definition of power and work in physics.

a)

The function of the conveyor belt is to carry the boxes from an initial point that is at low altitude to an end point that is at high altitude. In this way the conveyor belt prints a speed to the box to be able to raise it to the required vertical distance.

Since we have a velocity at the beginning and then we place the box at a high position, where then the box remains at rest, we can say that it converts kinetic energy to potential energy.

b)

Power is defined as the relationship of work over time. Therefore we have:

[tex]P=W/t[/tex]

where:

P = power = 3.8 [kW] = 3800 [W]

W = work [J]

t = time = 14 [s]

[tex]W=P*t\\W=3800*14\\W= 53200[J] = 53.2[kJ][/tex]

c)

Since the given time is equal to the given time at Point b, we can use the same work calculated.

We know that work is defined as the product of force by the distance traveled.

[tex]W =F*d[/tex]

So, the force is equal to:

[tex]F=W/d\\F=53200/5.3\\F=10037.73[N][/tex]

Now we know that force is defined as the product of mass by gravitation acceleration.

[tex]F =m*g[/tex]

where:

F = force or weight = 10037.73 [N]

g = gravity acceleration = 9.81 [m/s²]

m = mass [kg]

[tex]m=F/g\\m = 10037.73/9.81\\m = 1023.2 [kg][/tex]

d)

This part can be solved by means of the energy conservation theorem, where the potential energy is transformed into kinetic energy or vice versa.

[tex]E_{pot}=m*g*h = E_{kin}=0.5*m*v^{2}[/tex]

where:

h = elevation = 4.7 [m]

v = velocity [m/s]

[tex]m*g*h=0.5*m*v^{2}\\g*h=0.5*v^{2} \\v=\sqrt{\frac{g*h}{0.5} } \\v=\sqrt{\frac{9.81*4.7}{0.5} } \\v = 9.6 [m/s][/tex]

Answer:

85.77 m

Explanation:

From the question given above, the following data were obtained:

Initial velocity (u) = 41 m/s

Final velocity (v) = 0 m/s (at maximum height)

Acceleration due to gravity (g) = 9.8 m/s²

Maximum height (h) =?

The maximum height reached by the ball can be obtained as follow:

v² = u² – 2gh (since the ball is going against gravity)

0² = 41² – (2 × 9.8 × h)

0 = 1681 – 19.6h

Collect like terms

0 – 1681 = –19.6h

–1681 = –19.6h

Divide both side by –19.6

h = –1681 / –19.6

h = 85.77 m

Thus, the maximum height reached by the ball is 85.77 m

Answer:

rawrrrrrrrrrrrrrrrrrr

lol Thank you

Answer:AAAAAAHHHHH scary :c

Explanation:

Answer:

a)   w = 0.4726 rad / s,     b)  w_{f} = 4.56 rad / s

Explanation:

a) the two skaters have an angular momentum, for which we will form a system formed by the two of them, in this case when they collide the forces are internal and the moment is conserved.

Initial instant. When the skaters approach, just before touching

        L₀ = r p = r m v

in this case the result is the same if we take the reference system at the midpoint or on one of the skaters.    We place the reference system on one of the skaters

Final moment. After being joined by the pole

         [tex]L_{f}[/tex] = I w

as the forces are internal, the ngualr moment is conserved

         L₀ = L_{f}

         r m v = I w

suppose we approximate the skaters as particles

         I = m r²

we substitute

        r m v = m r² w

        w = v /r

we calculate

        w = 1.38 /2.92

         w = 0.4726 rad / s

What happens is that when the two skaters lower the pole, their velocity acts as a torque, creating a rotational movement with angular velocity w.

b) When the skaters who are at r₀ = 2.92 m approach [tex]r_{f}[/tex] = 0.940 m as the system is isolated, the angular momentum is conserved

initial instant. r₀ = 2.92

       L₀ = I w

final instant r_{f} = 0.940 m

       L_{f} = I_{f}  w_{f}

       L₀ = L_{f}

       I w = I_{f} w_{f}

let's approximate skaters as particles

       I = m r²

we substitute

     m r² w = m r_{f}² wf

     [tex]w_{f}[/tex] = [tex]\frac{r^{2} }{r_{f}^{2} } w[/tex]

we calculate

     w_{f} = [tex]\frac{2.92^{2} }{ 0.940^{2} }[/tex] 0.4726

     w_{f} = 4.56 rad / s

we see that the angular velocity increases

Answer:

(Total initial linear momentum = total final linear momentum.)

Momentum = mass × velocity

180×4 + 120×0 = 180×0 + 120×V

(180 ×4)/120 = V

Answer:

There are many kinds of waves all around us. There are waves in the ocean and in lakes. Did you also know that there are also waves in the air? Sound travels through the air in waves and light is made up of waves of electromagnetic energy.

The wavelength of a wave describes how long the wave is. The distance from the "crest" (top) of one wave to the crest of the next wave is the wavelength. Alternately, we can measure from the "trough" (bottom) of one wave to the trough of the next wave and get the same value for the wavelength.

The frequency of a wave is inversely proportional to its wavelength. That means that waves with a high frequency have a short wavelength, while waves with a low frequency have a longer wavelength.

Light waves have very, very short wavelengths. Red light waves have wavelengths around 700 nanometers (nm), while blue and purple light have even shorter waves with wavelengths around 400 or 500 nm. Some radio waves, another type of electromagnetic radiation, have much longer waves than light, with wavelengths ranging from millimeters to kilometers.

Sound waves traveling through air have wavelengths from millimeters to meters. Low-pitch bass notes that humans can barely hear have huge wavelengths around 17 meters and frequencies around 20 hertz (Hz). Extremely high-pitched sounds that are on the other edge of the range that humans can hear have smaller wavelengths around 17 mm and frequencies around 20 kHz (kilohertz, or thousands of Hertz).

Explanation:

Explanation:

Hope This Helped U

Brqinliest

Answer:

7. d. England during the Age of Enlightenment

8. a. State governments do not usually act together

Explanation:

The Age of Enlightenment occurred in the 18th century and at this time England was a Constitutional monarchy with a monarch and parliament ruling the country with different powers.

The third and fourth methods of amending the Constitution will be much harder to use because state governments simply do not usually act together as they most times have ideological differences. The sheer number of states it would take to unite for these methods to be used makes this impractical.

Answer:

θ = 26.6°

Explanation:

Formula for maximum height is;

h = u²sin²θ/2g

We are told maximum height is 25 m, thus;

u²sin²θ/2g = 25 - - - - (eq 1)

Formula for horizontal range is;

R = u²sin2θ/g

In Mathematics, sin2θ = 2sinθcosθ

So; R = 2u²sinθcosθ/g

R = 2u²sinθcosθ/g

We are given Horizontal range = 200 m.

Thus;

2u²sinθcosθ/g = 200 - - - - (eq 2)

Divide eq 1 by eq 2 to get;

200/25 = 4cosθ/sinθ

8 = 4cosθ/sinθ

4/8 = sinθ/cosθ

0.5 = tan θ

θ = tan^(-1) 0.5

θ = 26.6°

Answer:

mass and distance

Explanation:

The force of gravity acting on a body depends on the mass of the body and the distance between the bodies.

This is based on Newton's law of Universal gravitation which states that "the force of gravity between two bodies is directly proportional to the  product of their masses and inversely proportional to the distance between them".

We see that the more the masses between two bodies, and the lower their separation the more the gravitational force between them.

Answer:

ok followed!

Explanation:

Answer:

98.0665 newtons

have a good day :]

Answer:

Unit of precision for force is the Newton.

Explanation:

It is the official unit used to describe force in science and mostly abbreviated with the symbol N.

Answer:

i think b

Explanation:

Answer:

i think its They Guarantee rights of individuals

Explanation:

Answer:

To guarantee freedoms

Explanation:

Took the test

Answer:

the molecules will begin to move slowly and will turn to ice

Explanation:

hope this was good or not not sure if am right but yeah

Explanation:

Given that,

Number of turns in the coil, N = 100

Area of the coil, A = 100 cm² = 0.01 m²

It is placed at an angle of 70°.

Magnetic field, B = 0.1 Wb/m²

We need to find the magnetic flux through the coil and the emf is induced in the coil after 10⁻³ s.

Magnetic flux is given by :

[tex]\phi =BA\cos\theta\\\\\text{For N turns},\\\phi =NBA\cos\theta \\\\\phi=100\times 0.1\times 0.01\times \cos(70)\\\\=0.034\ Wb[/tex]

So, the magnetic flux through the coil is 0.1 Wb.

Emf induced in the coil is :

[tex]\epsilon=\dfrac{-d\phi}{dt}\\\\=\dfrac{0.034}{10^{-3}}\\\\=34\ V[/tex]

So, 34V of emf is induced in the coil.