Answers
Answer:
Be: Beryllium
C: Carbon
H: Hydrogen
He: Helium
Related Questions
Would the phases of the moon be affected if the moon did not make one rotation for each revolution of earth. Explain .
Answers
Answer:
No. If the moon did not rotate at all we would still see the same visible "fraction" of the moon's surface.
At the full moon phase we would still the entire surface of 1/2 of the moon regardless of which side of the moon we were observing.
Actually the moon does not make one rotation for each revolution of the earth, but rather, one rotation for each complete revolution of the moon around the the earth. That's why we always see the same side of the moon from earth. The back side of the moon is never visible from earth.
. Common household appliances are rated at 110 V, but power companies deliver voltage in the kilovolt range and then step the voltage down using transformers to 110 V to be used in homes. You will learn in later chapters that transformers consist of many turns of wire, which warm up as current flows through them, wasting some of the energy that is given off as heat. This sounds inefficient. Why do the power companies transport electric power using this method
Answers
Answer: High voltage transmission minimizes energy losses during electricity transmission.
Explanation:
When electricity is to be transmitted over a long distance, high voltage transmission is preferred to minimize energy losses due to heat.
The higher the transmission voltage, the lower the current and the lesser the resitance in the wire and the lesser the energy lost due to heat during transmission.
High voltage transmission in kilowatts enables light weight cables to be used for long distance electricity transmission.
This explains why, even though only 110 V may be required at home by some appliances, but electricity is transmitted in kilovolts and often require a stepdown transformer
A racecar accelerates at a rate 19 m/s each second. If the mass of the race car is 1600 kg, determine the net force acting on the car.
30,400 N
8,400 N
84 N
300 N.
Answers
Answer:
[tex]19 \times 16000[/tex]
According to the question,
Mass, m = 1600 kgAcceleration, a = 19 m/sForce:We know,
→ [tex]Force = Mass\times Acceleration[/tex]
By substituting the values, we get
[tex]= 1600\times 19[/tex]
[tex]= 30400 \ N[/tex]
Thus the above answer is right.
Find out more information about acceleration here:
https://brainly.com/question/12970081
A horse 1 m tall running towards a tree at a constant velocity of 20m/s,
there was a baboon on the tree which is 3m tall, if the baboon falls exactly on
the back of the horse and sped away with baboon at its back.
Calculate
I) how far was the horse from the tree and the time the baboon
falls on the horse.
Answers
The horse's position on the ground at time t is
x = (20 m/s) t
The baboon's height from the ground at time t is
y = 3 m - 1/2 g t²
where g = 9.80 m/s² is the magnitude of the acceleration due to gravity.
The baboon falls and lands on the horse, so that the two animals meet when the baboon's height is 2 m from the ground, which happens after
2 m = 3 m - 1/2 g t²
1/2 g t² = 1 m
t² = (2 m) / (9.80 m/s²)
t ≈ 0.452 s
In this time, the horse reaches the tree, so its distance from it is
(20 m/s) * (0.452 s) ≈ 9.04 m
Please help me, it’s due tonight and I’m very confused!! THANK YOU
Answers
Explanation:
If your reaction time is 1 second, then the new reaction time for each is:
Alcohol: 0.30 × 1 + 1 = 1.30
Drugs: 0.50 × 1 + 1 = 1.50
Cell phone: 0.20 × 1 + 1 = 1.20
What invisible force will cause you to fall to the earth if you fall off your bed?
Answers
Answer:
The answer to this is falling all the way through the Earth is impossible, since its core is molten. ... As you approached the center of the earth the pull of gravity would decline and eventually (at the center) cease, but inertia would keep you going.
Explanation:
your welcome
Calculate critical angle for right angle prism with apex angle 30o and refraction index 1.5. Consider that light is incident on flat surface of prism. Calculate minimum deviation angle of prism.
Answers
Answer:
Solution:
For small angle prism
δ
1
=(μ−1)A
⟹δ
1
=(1.5−1)(4)
⟹δ
1
=2
∘
So ray is incident on plane mirror at 2
∘
,
Hence δ
2
=S
mirror
=180
∘
−2(2
∘
)=176
∘
Total reflection = δ
1
+δ
2
=176
∘
+2
∘
=178
∘
clockwise.
cylindrical in shape with a radius of 2.5 cm and a height of 6 cm. The bottle is filled with squirts of pepper extract from a machine. Each squirt fills the bottle to a height of 0.025 cm. The density of the pepper extract is 1.135 gm/mL a. The machine malfunctions and stops when the bottle is two thirds full. How many squirts had the machine squirted into the bottle at this time? Show your work. b. What is the mass of extract is in the bottle when it is two thirds full? What is the mass of 1 squirt of extract?
Answers
Answer:
Explanation:
Volume of bottle filled = 2/3 x π R²h , R = radius = 2.5cm , h = height = 6 cm
= 2/3 x 3.14 x 2.5² x 6 = 78.5 cm³
volume of one squirt = π R² x .025 = 3.14 x 2.5² x .025 = .49 cm³
No of squirt required = 78.5 / .49 = 160.2 = 160
b )
mass of extract = volume x density = 78.5 x 1.135 = 89 gm
c ) mass of one squirt = volume of one squirt x density = .49 x 1.135 = .57 gm
The velocity of a wave is the product of the frequency and the
A. wavelength
B. amplitude
C. time
D. distance
Answers
Answer:
option A
Explanation:
Velocity = Wavelength / Time
But we know that Frequency = 1 / Time. So ,
Velocity = Wavelength × Frequency
The velocity of a wave is the product of the frequency and the wavelength. The correct option is A.
A wave's velocity is the result of its frequency and wavelength. The equation v = f * λ, where v stands for velocity, f for frequency, and for λ wavelength, describes this relationship.
While wavelength is the separation between two identical spots on a wave, frequency is the quantity of wave cycles passing a specific point in a unit of time.
The speed at which a wave propagates across a medium is determined by the product of its frequency and wavelength.
On the other hand, amplitude has nothing to do with the wave's velocity and instead describes the maximum movement of particles in the medium. Therefore, wavelength is the right response in this case.
Thus, the correct option is A.
For more details regarding wavelength, visit:
https://brainly.com/question/31143857
#SPJ6
A vehicle traveling at 45km/h comes to a stop in 9s how fast did the vehicle accelerate ?
Answers
Answer:
vi=45 km/h=12.5ms-1
t=9s
vf=0
acceleration=?
a=vf-vi/t=0-45/9=1.38ms-2
Explanation:
The acceleration of the vehicle is 56.25m. In physics and engineering, average speed is calculated using the formula v = d / t.
Explain what acceleration is.The rate at which direction and velocity of the an object moving change over time. A object or object moving straight ahead is accelerated whenever it accelerates or decelerates. Regardless of whether the speed remains constant, motion on the a circle accelerates so because direction is always shifting.
Is speed acceleration?We refer to a shift in an item's velocity or direction as accelerating. The speed at which velocity varies is known as acceleration. Bear in mind that velocity has two parts: direction and speed.
To learn more about : acceleration
Ref: https://brainly.com/question/17174392
#SPJ2
Define thermal conductivity.
Answers
Answer:
A measure of the ability of a material to transfer heat.
Explanation:
Please mark me as brainliest please
#8. Benny pushes Betty on her skateboard with a force of 150 N. If she accelerates at 3.0 m/s? what is her
mass? Type the formula and answer.
Answers
Answer:
50 kg
Explanation:
Force = Mass x Acceleration
150 = Mass x 3
150 = 50 x 3
You are an engineer in charge of designing a new generation of elevators for a prospective upgrade to the Empire State Building. Before the state legislature votes on funding for the project, they would like you to prepare a report on the benefits of upgrading the elevators. One of the numbers that they have requested is the time it will take the elevator to go from the ground floor to the 102nd floor observatory. They are unlikely to approve the project unless the new elevators make the trip much faster than the old elevators. If state law mandates that elevators cannot accelerate more than 2.10 m/s2 or travel faster than 10.3 m/s , what is the minimum time in which an elevator can travel the 373 m from the ground floor to the observatory floor
Answers
Answer:
The value is [tex]t_t =41.12 \ s [/tex]
Explanation:
From the question we are told that
The maximum acceleration is [tex]a_m = 2.10 \ m/s^2[/tex]
The maximum velocity is [tex]v_m = 10.3 \ m/s[/tex]
The height of the observatory floor is [tex]H = 373 \ m[/tex]
Generally at the initial state of the motion the elevator accelerates from rest with a maximum acceleration [tex]a_m = 2.10 \ m/s^2[/tex] to attain a maximum velocity [tex]a_m = 2.10 \ m/s^2[/tex] at a time period of [tex]t_a[/tex]
Then it continues with the maximum velocity for a time period of [tex]t_b[/tex]
and finally decelerates with a maximum deceleration [tex] a_m = -2.10 \ m/s^2[/tex] to come to rest at a time period of [tex]t_c[/tex]
Generally the velocity of the elevator for the first part of the motion is
[tex]v = u + at_a[/tex]
given that it started from rest u = 0 m/s
=> [tex]10.3 = 2.10t_a[/tex]
=> [tex]t_a = 4.90 \ s [/tex]
Generally from kinematic equations the distance covered during the first part of the motion is
[tex]S_1 = ut_a + \frac{1}{2} at_a^2[/tex]
=> [tex]S_1 = 0 + \frac{1}{2} (2.10 ) (4.90)^2[/tex]
=> [tex]S_1 = 25.21 \ m [/tex]
Generally the distance covered during the second part of the elevators motion is mathematically represented as
[tex]S_2 = v_m * t_2[/tex]
[tex]S_2 = 10.3 t_b[/tex]
Generally given that the first part of the elevator motion is similar to the third part of the elevator motion it implies that the distance covered is similar
i.e [tex]S_1 = S_3 = 25.21 \ m[/tex]
The total distance covered is mathematically repented as
[tex]H = S_1 + S_2 + S_3[/tex]
=> [tex]373 = 25.21 + 10.3 t_b + 25.21 [/tex]
=> [tex]t_2 = 31.32 \ s [/tex]
Generally the minimum total time taken is
[tex]t_t = t_a + t_b + t_c[/tex]
Generally [tex]t_a = t_c = 4.90 \ s[/tex]
So
[tex]t_t =4.90+ 31.32 +4.90[/tex]
=> [tex]t_t =41.12 \ s [/tex]
>
Some people believe that "all you are" is determined by the types and amount of neurotransmitters that ooze
through your synaptic gaps and the electrical current in your brain.
>
• Do you think that all of your thoughts, hopes, dreams and aspirations are results of physiological processes: your
love, hate, anger and memories are only at the synaptic level? Why or why not?
• How would you explain this to someone who knows nothing about how the brain works?
Answers
Answer:
No, although the thoughts, hopes, dreams and aspirations entirely the results of physiological processes: Love, hate, anger and memories are not only at the synaptic level because some or part of human behavior and reaction are due to nature and nurture rather than totally dependent on the external stimuli or nurture
Explanation:
The physiological process can be described as a part of a system that plays a role on how the brain works and in inventory management, a part of a product are items that can be counted in inventory and can then be sold or used internally while a product is an item only meant to be sold.
Therefore, a product consist of all the integral parts required to complete a given function
A product such as what determines emotions, aspirations, thoughts, hopes and dreams has only one predetermined purpose or a process which it fits into even before if was sold or made, just like a bus bought to carry future employees of a company that is having a new site office.
While a part such as the fan belt can be changes and used on other vehicles without altering the journey of the bus.
A system is more than just its integral part as the system was desirable even before it was made while a part is made because of the system.
Laboratory experiments, observational field studies, and model-building are all examples of different forms of scientific investigations. In what way do laboratory experiments primarily differ from other forms of scientific investigations?
A.
A laboratory experiment is the only accepted form of investigation within the scientific community.
B.
Studies about how things behave in nature or studies involving very large objects are best answered through laboratory experiments.
C.
Data can only be generated through laboratory experiments, not other forms of investigation.
D.
Laboratory experiments involve the identification and control of variables.
Answers
Answer:D:
Laboratory experiments involve the identification and control of variables.
Explanation:
Its D
Laboraty Expirements inolve the Identification and control of variables
Which forms of energy are involved when you turn on a desk lamp and the bulb
becomes hot?
Answers
Answer:
Electric energy moves through the wire to the lamp's bulb. In the bulb, electric energy transforms into thermal energy and light energy.
Explanation:
Which parts of the graph represents the object moving at a constant, positive acceleration?
Answers
Answer:
W and X
Explanation:
They are both straight lines and face upwards on the graph, this means it is a positive acceleration because upwards on the graph is a higher velocity. And a constant acceleration because the line is straight.
Also it can't be Z because Z is negative acceleration because the line goes down. and it can't be Y because there is no acceleration at Y because in the graph it shows it stays at 20 m/s. That leaves W and X.
The parts of the graph that represents the object moving at a constant, positive acceleration are W and X.
How to find the function which was used to make graph?A graph contains data of which input maps to which output.
Analysis of this leads to the relations which were used to make it.
It cannot be Z because Z is negative acceleration because the line goes down. and Y because there is no acceleration at Y because in the graph it shows it stays at 20 m/s.
That leaves W and X.
W and X are both straight lines and face upwards on the graph, this means it is a positive acceleration because upwards on the graph is a higher velocity.
Also, a constant acceleration because the line is straight.
The parts of the graph that represents the object moving at a constant, positive acceleration are W and X.
Learn more about finding the graphed function here:
https://brainly.com/question/27330212
#SPJ2
PLS HELP
A marble rolls off a table with a horizontal velocity of 8 m/s and the cliff has a height of
2.71 m. How far does the marble land from the base of the table? Round your answer to
two decimal places.
Answers
The accompanying map shows the route traveled by a school bus.What is the magnitude of te dispacment odte school bus fo start to te end of its trip?
Answers
Answer:1,800
Explanation:
A design team for an electric car company finds that under some conditions the suspension system of the car performs in a way that produces unsatisfactory bouncing of the car. When they perform measurements of the vertical position of the car y as a function of time t under these conditions, they find that it is described by the relationship: y(t) = yoe-at cos(wt) where yo = 0.75 m, a = 0.95s-1, and w= 6.3s-1. In order to find the vertical velocity of the car as a function of time we will need to evaluate the dy derivative of the vertical position with respect to time, or dt As a first step, which of the following is an appropriate way to express the function y(t) as a product of two functions?
a) y(t) = f(t) · g(t), where f(t) = yoe cos and g(t) wt.
b) y(t) = f(t) · g(t), where f(t) = yoe and g(t) = cos(wt).
c) y(t) = f(t)·g(t), where f(t) = yoe cos(wt) and g(t) = -at.
d) y(t) cannot be expressed as a product of two functions.
Answers
Answer:
The answer is "Option b"
Explanation:
[tex]\to \bold{y(t) = y_0e^{-a t} cos(\omega t)}[/tex]
[tex]= y_0 e^{-\alpha t} cos(\omega t)[/tex]
and
[tex]\bold{y(t) =f(t) \cdot g(t)}[/tex]
where
[tex]\to f(t) = y_{0}\ e^{- at} \ \ \ \ \ \\\\\ \to g(t) = cos {(\omega t)}[/tex]
The table shows the commonly eaten foods of some groups of organisms.
Commonly Eaten Foods List
Group Commonly Eaten Foods
A squids, crabs, lobsters
B branches, barks, twigs, roots
C insects, leaves, nuts, bird eggs
D vegetables, fish, grains, fruits
Which groups contain both primary and secondary consumers
HELP ASAP
Answers
Answer:
c and d
Explanation:
I got your back bro ;)
Answer:
C and D
Explanation:
On dry concrete, a car can decelerate at a rate of 7.00 m/s2 , whereas on wet concrete it can decelerate at only 5.00 m/s2 . Find the distances necessary to stop a car moving at 30.0 m/s (about 110 km/h) (a) on dry concrete and (b) on wet concrete. (c) Repeat both calculations, finding the displacement from the point where the driver sees a traffic light turn red, taking into account his reaction time of 0.500 s to get his foot on the brake.
Answers
Answer:
Explanation:
a ) Let the distance required in former case be d₁ .
initial velocity u = 30 m /s , final velocity v =0 , deceleration a = 7.00 m /s²
v² = u² - 2 a s
0 = 30² - 2 x 7 x d₁
d₁ = 64.28 m
b) initial velocity u = 30 m /s , final velocity v =0 , deceleration a = 5.00 m /s²
v² = u² - 2 a s
0 = 30² - 2 x 5 x d₂
d₂ = 90 m
c)
t = .5 s
s₁ = ut - .5 at²
= 30 x .5 - .5 x 7 x .5²
= 15 - .875
= 14.125 m
t = .5 s
s₂ = ut - .5 at²
= 30 x .5 - .5 x 5 x .5²
= 15 - .625
= 14.375 m
Hey!Can someone solve my question??
Answers
Answer:
P1 = 2680 pa P2 = 4870pa
T1 = 273k T2 = T
From the ideal gas equation,
P1 / T1 = P2 / T2
2680 / 273 = 4870 / T
T = 4870 * 273 / 2860
T = 496.38 k
Kindly Mark Brainliest, Thanks
Answer:
223.38 C
Explanation:
according to gay lussacs law
p1/t1=p2/t2
so 2680/273.16=4870/t2
or t2=496.38 K
in celsius= 496.38-273=223.38 C
What is force? Force is the change in velocity with respect to time. Force is a push or a pull that usually causes distortion and/or acceleration. Force is the product of mass and velocity. Force is the ability to do work. Identify several of the forces that are acting on or around you. (Select all that apply.) force of friction holding nails and screws in desks, cabinets, walls, etc. the outward force acting on a ball that you are twirling on a string force of inertia keeping your car moving weight (force of gravity) pulling down on everything force of friction between you and your seat
Answers
Answer:
1. Force is a push or a pull that usually causes distortion and/or acceleration.
2. force of friction holding nails and screws in desks, cabinets, walls, etc.
3. weight (force of gravity) pulling down on everything.
4. force of friction between you and your seat
Explanation:
A force can be defined as a push or a pull that usually causes distortion and/or acceleration. A force is a vector quantity because it has both magnitude and direction. Also, force typically causes an interaction (push or a pull) between two objects such as frictional force, gravitational force, tension force, electric force, normal force, magnetic force etc.
Mathematically, a force is given by the equation;
[tex]F = ma[/tex]
Where;
F represents force.
m represents the mass of an object.
a represents acceleration.
Thus, the acceleration (a) of an object of constant mass (m) is directly proportional to the amount of force acting on it or the degree of force exerted on it.
Additionally, the standard unit of measurement for a force is Newton (N).
Some examples of forces found around us are;
1. Force of friction holding nails and screws in desks, cabinets, walls, etc.
2. Weight (force of gravity) pulling down on everything.
3. Force of friction between you and your seat.
At locations A and B, the electric potential has the values VA=1.51 VVA=1.51 V and VB=5.81 V,VB=5.81 V, respectively. A proton released from rest at one of these locations passes through the other location. From which location was the proton released? A B What is its speed when it passes through the other location? speed: m/s Repeat the same question, but this time for an electron. From which location was the electron released? B A What is its speed when it passes through the other location? speed: m/s
Answers
Answer:
For proton:
A. The proton is released from Vb (highest potential)
B. v = 2.9x10⁴ m/s
For electron:
A. The electron is released from Va (lowest potential)
B. v = 1.2x10⁶ m/s
Explanation:
For a proton we have:
A. To find the origin from which the proton was released we need to remember that in a potential difference, a proton moves from the highest potential to the lowest potential.
Having that:
Va = 1.51 V and Vb = 5.81 V
We can see that the proton moves from Vb to Va, hence the proton was released from Vb.
B. We now that the work done by an electric field is given by:
[tex]W = \Delta Vq[/tex] (1)
Where:
q: is the proton's charge = 1.6x10⁻¹⁹ C
V: is the potential
Also, the work is equal to:
[tex] W = \Delta K = (K_{a} - K_{b}) = \frac{1}{2}mv_{a}^{2} - \frac{1}{2}mv_{b}^{2} [/tex] (2)
Where:
K: is the kinetic energy
m: is the proton's mass = 1.67x10⁻²⁷ kg
[tex]v_{a}[/tex]: is the velocity in the point a
[tex]v_{b}[/tex]: is the velocity in the point b = 0 (starts from rest)
Matching equation (1) with (2) we have:
[tex]\Delta Vq = \frac{1}{2}mv_{a}^{2}[/tex]
[tex](5.81 V - 1.51 V)*1.6 \cdot 10^{-19} C = \frac{1}{2}1.67 \cdot 10^{-27} kg*v_{a}^{2}[/tex]
[tex] v_{a} = 2.9 \cdot 10^{4} m/s [/tex]
For an electron we have:
A. For an electron we know that it moves from the lowest potential (Va) to the highest potential (Vb), so it is released from Va.
B. The speed is:
[tex]\Delta Vq = \frac{1}{2}mv_{b}^{2} - \frac{1}{2}mv_{a}^{2}[/tex]
Since [tex]v_{a}[/tex] = 0 (starts from rest) and [tex]m_{e}[/tex] = 9.1x10⁻³¹ kg (electron's mass), we have:
[tex](5.81 V - 1.51 V)*1.6 \cdot 10^{-19} C = \frac{1}{2}9.1 \cdot 10^{-31} kg*v_{b}^{2}[/tex]
[tex]v_{b} = 1.2 \cdot 10^{6} m/s[/tex]
I hope it helps you!
C. 5 mi., North is it a scalar or vector
Answers
Answer:
Vector.
Explanation:
A vector has both magnitude and direction.
A scalar has just magnitude.
If the force of kinetic friction on a crate is 50 N and the weight of the crate is
180 N, what is the coefficient of kinetic friction?
Answers
Answer:
The coefficient of kinetic friction μ = 0.278
Explanation:
The frictional force on the crate is given by F = μN where μ = the coefficient of kinetic friction and N = normal force. The normal force equals the weight of the crate W = 180 N.
Since the kinetic friction F = 50 N, and the normal force which is the weight of the crate equals N = W = 180 N, the coefficient of kinetic friction μ is given by μ = F/N
= 50 N/180 N
= 0.278
So, the coefficient of kinetic friction μ = 0.278
A wave travels at 48 m/s and has a frequency of 12 Hz. What is the wavelength of the wave?
0.25 m
4.0 m
36 m
60 m
Answers
Answer:
Wavelength = 4 m
Explanation:
We know that Velocity = Wavelength × Frequency
So, Wavelength = Velocity / Frequency
Here in the question , Velocity = 48 m/s & Frequency = 12 Hz.
So wavelength = 48/12 = 4 m
Our power plant generates electricity using a steam turbine. At the exit from our power generation process, we end up with 562.0 kg/s of liquid water at 330.0 K. We cannot release this water directly into a nearby river if the temperature is over 310.00 K, without causing significant thermal pollution that would damage fish populations. Our plan is to mix this warm water with another cooler water stream at 290.00 K. What is the mass flow rate of this cool water stream needed to meet the regulation
Answers
Answer:
The mass flowrate of the cooling water needed to meet the regulation is 560 kg/s
Explanation:
The given information are;
The mass flow rate of the water = 562.0 kg/s
The temperature of the exit water = 330.0 K
The allowable temperature of the of released water into nearby river = 310.00 K
The temperature of the cool water with which the temperature of the exit water is cooled = 290.00 K
Therefore, we have;
Heat gained by the mixture = The heat of the final mixture exited to the river
Q = m×c×ΔT
[tex]m_w[/tex] = 562.0 kg/s
The mass of the cooling water = x
The final temperature = 310 K
4.2×562×(330 - 310) = x×4.2×(310 - 290)
47208 = 84×x
x = 47208/84 = 560 kg
Therefore, the mass flowrate of the cooling water needed to meet the regulation = 560 kg/s.
a 5.5kg box us pushed across the lunch table. the net force applied to the box is 9.7n. what is the acceleration of the box?
Answers
Answer:
1.76 m/s^2
Explanation:
The formula to find the force is F = ma (reference from 2nd law of Newton's Laws of Motion). Since you need to find the acceleration of the box, you need to use the formula a = f/m
a = 9.7 n divided by 5.5 kg = 1.76 m/s^2
