Answer:
The car's angular speed is [tex] \frac{rad}{s}[/tex].
Explanation:
Angular velocity is usually measured with [tex]\frac{radians}{sec}[/tex], so I'm going to use that to answer your question.
The relationship between tangential velocity and angular velocity (ω) is given by:
[tex]V = \omega R[/tex]
Using the values from the question, we get:
[tex]2 \frac{m}{s} = \omega (0.4m)[/tex]
[tex]\omega = 5 \frac{rad}{s}[/tex]
Therefore, the car's angular speed is [tex]5 \frac{rad}{s}[/tex].
Hope this helped!
16. For this table of data, how should the y-axis be labeled (with units)?
mass (kg)
3.2
4.6
6.1
6.2
7.4
9.
10.4
10.9
newtons (m/s)
31.381
45.1 111
59.821
60.801
72.569
89.241
101.989
106.892
Oms'
mass (kg)
O newtons
O kg
mass
O newtons (m/s?)
Answer:
The y-axis should be labelled as W in Newtons (kg·m/s²)
Explanation:
The given data is presented here as follows;
Mass (kg) [tex]{}[/tex] Newtons (kg·m/s²)
3.2 [tex]{}[/tex] 31.381
4.6 [tex]{}[/tex] 45.1111
6.1 [tex]{}[/tex] 59.821
7.4 [tex]{}[/tex] 72.569
9 [tex]{}[/tex] 89.241
10.4 [tex]{}[/tex] 101.989
10.9 [tex]{}[/tex] 106.892
From the table, it can be seen that there is a nearly linear relationship between the amount of Newtons and the mass, as the slope of the data has a relatively constant slope
Therefore, the data can be said to be a function of Weight in Newtons to the mass in kilograms such that the weight depends on the mass as follows;
W(m) in Newtons = Mass, m in kg × g
Where;
g is the constant of proportionality
Therefore, the y-axis component which is the dependent variable is the function, W(m) = Weight of the body while the x-axis component which is the independent variable is the mass. m
The graph of the data is created with Microsoft Excel give the slope which is the constant of proportionality, g = 9.8379, which is the acceleration due to gravity g ≈ 9.8 m/s²
We therefore label the y-axis as W in Newtons (kg·m/s²)
The ionization energy of an atom is the energy required to remove an electron from the atom. In the Bohr model, the ionization energy equals the energy difference between the lowest energy level n = 1 , in which the electron is closest to the nucleus, and the energy level n = [infinity] , which has an infinite radius.
The question is incomplete, the complete question is;
The ionization energy of an atom is the energy required to remove an electron from the atom. In the Bohr model, the ionization energy equals the energy difference between the lowest energy level n = 1 , In which the electron is closest to the nucleus, and the energy level n oo, which has an infinite radius. Compared to the ionization energy of hydrogen, the energy required to remove the electron from singly ionized helium is O two times greater. O four times greater. eight times greater. O one-half as great. O one-fourth as great.
Answer:
four times greater
Explanation:
For a hydrogen atom, an ionization energy of 13.6 electron volts is required to eject its single electron from the lowest energy level all the way out of the atom.
The helium ground state contains only two 1s electrons. When one of these is removed, He^+ looks quite similar to H^+.
The energy required to remove the remaining helium electron should be; 4×(13.6eV)=54.4eV since the energy depends on the square of the nuclear charge.
The ______________ is a very strong north westerly air current encircling the Earth causing the cold fronts to come down into the United States during the winter. *
10 points
sea breeze
land breeze
climate
weather
ocean current
conduction
Gulf Stream
Jet Stream
hurricane
wind*
Answer: it's wind
Explanation:
What object has the most inertia? (THE CHOICES ARE IN THE PICTURE WILL GIVE BRAINLIST PLEASE HURRY)
BRAINLY HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
The answer is B.) Motion.
- Chilio
with the help of the given diagram calculate the current through each resistor.
Answer:
2 and 0.6 ohms = 1.8A
4ohms = 1.08A
6 ohms = 0.72 ohms
Explanation:
With the help of the given diagram calculate the current through each resistor.
According to ohms law
E = IRt
E is the electromotive force = 9V
I is the total current in the circuit
Rt is the total equivalent resistance
Get Rt
1/R = (1/4+1/6) (parallel resistors)
1/R = 3+2/12
1/R = 5/12
R = 12/5
R = 2.4 ohms
Rt = 2 + 0.6 + 2.4
Rt = 5 ohms
Get the total current
I = E/Rt
I = 9/5
I = 1.8A
Since same current flows in a series connected resistors
Current in the 2 and 0.6 ohms resistors will be 1.8A
For the 4 and 6 ohms resistor:
Voltage across them is expressed as:
V = IR
V = 1.8(2.4)
V = 4.32Volts
The current in 4 ohms resistor
I = 4.32/4
I = 1.08A
The current in 6 ohms resistor
I = 4.32/6
I = 0.72A
I'll give brainliest!! Please help asap!!!
Explain how scientist learned about the magnetic poles of the Earth.
gas to liquid pls fast answer
Answer:
wet farts, JK its condensation.
Pick the correct word to fill up the blank in below question: velocity, combustion, acceleration, gravitation, force
If a race car wants to change its velocity then a net force is
required to cause the necessary
Answer: Acceleration
If I drive 60 km/h and it takes me 3000 s to get to work, how far is my work
from my house? *
Answer:
Explanation: CONVERT km/h TO m/s
WE GET 16.67 M/S
THEN,
USE : speed= distance / time
16.67 = x / 3000
∴x = 50,000 m
or
∴x = 50 km
SOMEONE PLSSSS HELP ME WITH THIS QUESTION!!