Converging surface winds and rising air movements are present near the equator and 60° latitude.
What does a chinook wall cloud suggest?It is a chinook wall cloud. cloud bank that develops over the mountains and foretells the potential arrival of a chinook. Thermal low characteristics. - develops in an area of warm air.
What is Chinook in a nutshell?A hot breeze called a chinook blows in the winter. Being heated, it quickly raises the temperature. This rise in temperature causes the snow to melt, opening up the pasturelands for animal grazing.
To know more about coverging surface visit:
brainly.com/question/24836371
#SPJ4
the ____ was established to secure and monitor security risks to u.s. networks and the internet.
the US-CERT was established to secure and monitor security risks to u.s. networks and the internet.
What is a common encryption technique that is employed to safeguard data transferred over a wireless network?WPA2 is currently the best encryption protocol for WiFi networks. Log on to the management page of your wireless network and check the WiFi settings to make sure WPA2 is selected (it may be labelled WPA2-PSK or WPA2-Personal on your WiFi router).
What safeguards your computer against illegal access?Software firewalls are programs that you install on your computer to help shield it from unauthorized data inbound and outbound. A software firewall will only shield the computer it is installed on. Many antivirus scanners also come with a software firewall.
To know more about US-CERT visit:-
https://brainly.com/question/14046040
#SPJ4
the impact that u.s. and western media have had on the rest of the world is known as _____.
"Media imperialism" refers to the influence that Western and American media have exerted on rest of the globe.
Describe the term Media imperialism?The dominance of mass media by much more powerful states is referred to as media imperialism.
The term "media imperialism" refers to the idea that the national identities of smaller governments are diminished by the mass media created by larger states. The small state might be viewing a show that was made elsewhere that doesn't reflect their ideals, rather than a local program that addresses concerns and values in that nation. The phrase has been used to disparage how powerful media outlets control the media in several nations. The phrase "media imperialism has almost always used in the discussion of the media landscape due to the enormous number of programs broadcast in the U.S. and the former dominance of news organizations like CNN.
Thus, Media imperialism refers to the influence that Western and American media have exerted on rest of the globe.
To know more about the imperialism, here
https://brainly.com/question/9167079
#SPJ4
a(n) ______ is an abusive or insulting message in online communication.
a) bomb b)troll c) flame d) grenade
Answer:
The answer to your question is c) flame
Explanation:
I hope this helps and have a wonderful day!
How do I do this in Access? Please list all steps in detail.
Create a new relationship between the EmployeeID field in the Professor table and the Advisor field in the Student table. Ensure that values in the Advisor field have a corresponding value in the EmployeeID field.
Steps in detail to do in Access here:
Open Micr0soft Access and open the database that contains the Professor and Student tables.In the Navigation Pane, right-click on the Student table and select "Design View" from the context menu.In the Design View, click on the Advisor field to select it.Go to the "Database Tools" tab in the Ribbon and click on the "Relationships" button.In the Relationships window, click on the "New" button.In the "Table/Query" field, select the Professor table. In the "Related Field" field, select the EmployeeID field.In the "Table/Query" field, select the Student table. In the "Related Field" field, select the Advisor field.Click on the "Enforce Referential Integrity" checkbox. This will ensure that any values in the Advisor field must have a corresponding value in the EmployeeID field.Click on the "Create" button to create the relationship.Click on the "Close" button to close the Relationships window.Save the changes to the Student table by clicking on the "Save" button in the Design View.Close the Design View of the Student table.You have now successfully created a new relationship between the EmployeeID field in the Professor table and the Advisor field in the Student table and ensured that values in the Advisor field have a corresponding value in the EmployeeID field.
ACCESS FOR VALUE RELATIONSHIPIn Access, you can set up connections between tables in one of three ways.
This is a one-to-many connection. An order tracking database might include two tables: one for Customers and another for Orders.A connection between multiple parties. The Products table's connection to the Orders table is up next.Individual interaction.Learn more about Access Relationship here:
https://brainly.com/question/20038736
#SPJ4
A data analyst uses the bias() function to compare the actual outcome with the predicted outcome to determine if the model is biased. They get a score of 0. 8. What does this mean?.
A bias score of 0.8 would likely indicate that the model has a high level of bias. Bias in a machine learning model refers to the difference between the predicted values and the true values.
The bias function you described compares the actual outcome with the predicted outcome, and a score of 0.8 would suggest that there is a large difference between the two, indicating that the model is making predictions that are far from the actual outcomes. It's important to note that the specific interpretation of the bias score would depend on the context and the way the bias function is implemented. Typically, a score closer to 0 indicates lower bias, while a score closer to 1 indicates higher bias.
It's also worth to mention that Bias alone doesn't necessarily mean that the model is not useful or that it can't produce good predictions. It's possible to have a high bias model with a low variance that generalize well, or even to have a low bias model that can generalize poorly.
Learn more about data analyst here, https://brainly.com/question/28893491
#SPJ4
Alicia is at the football game on Friday with her friends. On her drive home, she swerves to avoid a piece of debris in the road and slides into a ditch. Alicia is okay, but her car has $8,000 worth of damage. What type (s) of insurance could Alicia use to cover this accident?
Answer:
Alicia may be able to use her auto insurance to cover the damages to her car resulting from the accident. Specifically, she may be able to use her collision coverage, which is designed to cover damages to a policyholder's vehicle that result from a collision with another object, such as another car or a piece of debris in the road. If Alicia has collision coverage on her auto insurance policy, it should cover the $8,000 worth of damages to her car, minus any applicable deductible. In addition to collision coverage, Alicia may also be able to use her comprehensive coverage to cover the damages to her car. Comprehensive coverage is designed to cover damages to a policyholder's vehicle that are caused by non-collision events, such as fire, theft, or weather-related events. If Alicia has comprehensive coverage on her auto insurance policy, it may also cover the damages to her car, again minus any applicable deductible.
Explanation:
A(n) _____attack involves an adversary repeating a previously captured user responseO clientO replay O Trojan .
A C: "Trojan" attack involves an adversary repeating a previously recorded user response.
A Trojan Horse (Trojan) is a form of malware that masquerades as legitimate software or code. Once within the network, cyber attackers can do any activity that a legitimate or a real user would, including as exporting files, editing data, deleting files, or otherwise manipulating the device's contents. It means that when a trojan enters into a system, it can perform various destructive actions before a user even knows it is there.
Therefore, a trojan attack contains an adversary repeating a previously captured user response.
You can learn more about trojan attack at
https://brainly.com/question/16558553
#SPJ4
if using a mining analogy, "knowledge mining" would be a more appropriate term than "data mining." T/F
The phrase "knowledge mining" rather than "data mining" might be more appropriate if utilizing a mining comparison. It is accurate to say this.
What kind of knowledge are accessible through data mining?Extraction or mining of knowledge from vast amounts of data is referred to as data mining. Data mining is typically employed in settings where enormous amounts of data are processed and stored. For instance, the banking system uses data mining to store enormous amounts of constantly processed data.
Why is data mining used instead of knowledge mining?Data mining, as opposed to knowledge mining, refers to the process of obtaining facts from the existing data. While knowledge denotes a thorough examination of those facts. We gather facts, not wisdom.
To know more about knowledge mining visit :-
https://brainly.com/question/20116147
#SPJ4
an individual can use a view to create reports, charts, and other objects that show database data. T/F
The creation of reports, charts, and other objects that display database data can be done using views, it is true.
What variety of views do DBMS have?Dynamic views and static views are the two categories of database views. Data from one or more tables can be included in dynamic views, which also include all of the selected table's columns by default.
Which sort of join combines all the data from one table with the matching data from the other?The results of a CROSS JOIN, sometimes referred to as a Cartesian JOIN, are all rows from one table crossed with all rows from the other table. In other words, every possible combination of rows from the connected tables can be found in the join table of a cross join.
To know more about database visit:-
https://brainly.com/question/30204950
#SPJ4
a subquery can be coded in a where, from, select, or ______________ clause.
A BLANK statement that is written inside another SQL statement is known as a subquery. The subquery can return which of the following values if it is presented as follows.
What clauses allow the usage of subqueries?A subquery may be nested inside the outer SELECT, INSERT, UPDATE, or DELETE statement's WHERE or HAVING clause, or inside another subquery.
A subquery Mcq: What is it?A subquery is an entire query nested within another query's SELECT,FROM, HAVING, or WHERE clause. At the very least, the subquery must be surrounded in parenthesis and contain the clauses SELECT and FROM.
To know more about SQL visit:-
https://brainly.com/question/20264930
#SPJ4
when using classful ipv4 addressing, a network id always ends with an octet of ____.
In class A, the first octet's higher order bit is always set to 0. The first octet's final 7 bits are utilized to calculate the network ID.
What does first octet mean
IP addressing is one of the most crucial subjects for passing the INTRO and ICND tests, which shouldn't come as a surprise to anyone reading this book. In actuality, the only significant subject addressed in detail on both the INTRO and ICND tests is IP addressing. Additionally, you must have a solid grasp of IP addressing and subnetting in order to pass any Cisco certification exam. To put it another way, you better be familiar with addressing and subnetting!
Know more about network ID. Visit:
https://brainly.com/question/16969043
#SPJ4
Exercise 6.9.6: Concentric Circles 5 points Let's Go! Program Result Run Derno Stop Write a program that starts by drawing the largest circle that can fully fit on the canvas (radius = 200) and continues drawing circles as long as the radius is greater than 0. Each time a circle is drawn, the radius should decrease by 20. The circle colors should alternate between red and black. Use a variable to control the radii values. Another variable can be used to control the color of each circle. Important! Circles stack on top of one another in the order they are added to the canvas, so make sure to add the largest circle first, and each smaller one afterward. IN Javascript Activate Wind Go to Settings to a
Using the knowledge in computational language in JAVA it is possible write a program that starts by drawing the largest circle that can fully fit on the canvas
Writting the code:import turtle
#Create pen
t = turtle.Turtle()
#There are 4 concentric circles with increment of 25
#radius of largest circle will be 100
radius = 100
color_choice = list()
#Get color choice from user
for i in range(4):
color_choice.append(input("Enter a color name: "))
#Draw four circles
for i in range(4):
#Move the pen to desired position without drawing any line
t.penup()
t.sety(-1 * radius)
t.pendown()
#Set the fill color choice from list
t.fillcolor(color_choice[i])
#Draw filled circle
t.begin_fill()
t.circle(radius)
t.end_fill()
#Decrement the radius to draw a smaller overlapping circle
radius -= 25
See more about JAVA at brainly.com/question/29897053
#SPJ1
how to resolve the server you are trying to access is using an authentication protocol not supported by this version of office
The server rejects the request because the payload format is not supported, as shown by the HTTP 415 Unsupported Media Type client error response code.
The request's specified Content-Type or Content-Encoding, or a direct inspection of the contents, may have caused the format issue. The OneDrive for Work or School sync app automatically upgrades when a new version is made available if it was installed independently using Click-to-run. Your computer often updates itself after restarting. Choose Update Now from the Update Options option if your Office apps aren't upgrading automatically. The server rejects the request because the payload format is not supported, as shown by the HTTP 415 Unsupported Media Type client error response code.
Learn more about computer here-
https://brainly.com/question/20414679
#SPJ4
The NTLMv2 Microsoft authentication protocol is incompatible with the Microsoft IIS protocol.
How does OneDrive get updated?
The OneDrive for Work or School sync app updates on its own when an update is advertised by the update service if it was installed separately using Click-to-run.
Your computer often updates itself after restarting. Choose the Update Options button, then select Update Now if your Office programs aren't upgrading automatically.
How can I fix OneNote's permissions?
Visit OneNote.com's Fix notebooks page. Next to the notebook that's giving users difficulties, click Fix Permissions. Your access will be reestablished once you see Permissions Fixed.
Learn more about Microsoft IIS protocol
brainly.com/question/30135894
#SPJ4
a user purchases a new smartphone and is trying to use a high quality bluetooth headset on the new device. however, the headset is not connected to the smartphone. what are three settings that the user needs to check to troubleshoot the problem? (choose three.)
There are three settings that the user needs to check to troubleshoot the problem are Bluetooth, Pairing and Volume.
What is troubleshoot?Troubleshooting is the process of diagnosing and resolving issues that arise with computer hardware, software, and networks.
1. Bluetooth – The user should first check the Bluetooth settings on both the smartphone and the headset to make sure that Bluetooth is enabled and the devices are in range.
2. Pairing – The user should then make sure that the headset is paired with the smartphone. The user should follow the instructions on the headset to ensure that the pairing process is complete.
3. Volume – The user should also check the volume settings on both the headset and the smartphone to make sure that the audio is not too low or too high.
To learn more about troubleshoot
https://brainly.com/question/30048817
#SPJ4
if p is a pointer variable, the statement p = p + 1; is valid in c++. true or false
In the method definition time is defined, that both variables are a pointer type, that's choices c is correct and others were wrong,
In the provided method prototype a method "exchange" is declared, which receives two integer parameters, that is "p and q", and this method can't return any value because its return type is void. In the method definition time is defined, that both variables are a pointer type, that's choices c is correct and others were wrong, that may be described as follows: Both Options A and B are incorrect since they both attempt to exchange the value. Option D and Option E are both erroneous because they both use the integer pointer variable "temp," which is not declared in the question.
Learn more about Prototype here:
https://brainly.com/question/15999453
#SPJ4
Which of the following statement best describes the prairie?
The prairie contains many types species of grazers.
The early prairie had mostly trees and some grass.
The prairie used to receive little rainfall and a lot of sunlight.
The prairie is place where large predators are abundant.
ASAP please help I need it fast
The statement that best describes the prairie is option C: The prairie used to receive little rainfall and a lot of sunlight.
What is the prairie about?A prairie is a type of ecosystem that is characterized by wide, rolling grasslands. It typically receives low amounts of rainfall and has a lot of sunlight, making it well-suited to grasses and other plants that are adapted to dry conditions.
While prairies are known for having a diversity of grazing animals, prairies are not known for having many types of species of grazers. The prairie is known for having a large herbivore population, but that does not mean it has many different species of them.
Learn more about prairie from
https://brainly.com/question/920502
#SPJ1
the index key can have multiple attributes, this is called a(n) ____________________ index.
It is referred to as a(n) composite index key when the index key has several properties.
What is a sample of a composite index?A composite index is one that contains information on two or more columns. For instance, the sentence that follows generates a two-column composite index: Employees (Surname, GivenName): CREATE INDEX name; If the first column doesn't offer enough selectivity on its own, a composite index can be helpful.
What is comparing an index to a composite index?A composite index is a data structure containing records sorted on something, just like a single index. But unlike a single index, that object is a concatenation of numerous fields rather than a single field. The composite index is sorted by class-position, thus position = 'Top'; will increase retrieval speed.
To know more about composite index key visit:
https://brainly.com/question/9617712
#SPJ4
__________________ is the best option for a 10 gigabyte core network which needs to use 10 meter (33 feet) fiber runs?
10GBase-SR is the best option for a 10 gigabyte core network which needs to use 10 meter (33 feet) fiber runs.
What is gigabyte core network?The novel, native-to-the-cloud function for processing control plane signals in Ericsson's dual-mode 5G Core solution is called the Ericsson Packet Core Controller. It offers the gateway control, mobility, access, session, and 5G use-case support functionalities. The new 5G service category known as mMTC (Massive Machine-Type Communications) may handle extraordinarily high online device connection densities. An internet service that delivers a maximum connection speed of 1 gigabit per second (Gbps), 1,000 megabits per second (Mbps), or 1 million kilobits per second is known as a gigabit broadband connection (Kbps). Video streaming is a snap to handle with the substantially quicker rates. playable media engaging media.To learn more about gigabyte core network refer to:
https://brainly.com/question/5860806
#SPJ4
List four reasons a stock will go up
Four reasons a stock will go up are:
Stock in finance refers to all of the shares that make up a corporation's or company's ownership. A single share of stock represents fractional ownership of the firm based on the total number of shares.
Positive news, such as solid financial figures or the successful introduction of a new product, may enhance demand for the company's shares, resulting in a higher stock price.
When an industry grows, the demand for and price of the stocks of firms in that industry rises. If investors have a favorable view on the market or a specific firm, it can enhance demand for the company's shares, leading the stock price to climb. If market circumstances are good, it can lead to an increase in overall demand for stocks, causing stock prices to rise.
Learn more about stocks:
https://brainly.com/question/29992015
#SPJ1
Programmers usually refer to the process of saving data to a file as _______________a file.
a. saving data to
b. copying data to
c. writing data to
d. put data to
e. None of the above
The act of writing data to a file is how programmers most often refer to the process of saving data.
What word best describes a file that contains data being written to it?Data files that are read from are referred to as "output files." False. A file that receives data writing operations is referred to as a "input file."
Which file type contains data in a series of kinds that can only be accessed by specialized readers?A binary file includes information that hasn't been transformed into text. A program is the only one permitted to read the data that is stored in a binary file. Binary files can't be opened in text editors to view their contents.
To know more about process of saving data visit :-
https://brainly.com/question/29451448
#SPJ4
Practicelt Reflection - Chapter 4a - fractionSum Consider the following solution to Practicelt Exercise 4.1: fraction Sum Solution public static double fractionSum(int n) double sum-0 sum1.0/ i; return sum; Why is it necessary to say 1.0 in the division instead of 1?
1.0 is used in the numerator of division "1.0/ i " because in order to obtain the sum with the decimal point it is necessary that one of the values in the division is to be with the decimal point.
If the division "1.0/ i" uses 1 rather than 1.0, integer division, not floating point division, will be performed and result will be returned as an integer. As the requirement of the question is to perform floating point division in order to find the sum and return it in floating point value because the data type of the varibale sum is double, which requires that the sum should be retuned with a decimal point.
So in order to meet the specified purpose, it is necessary that the floating point value 1.0 should be used rathar than using integer value 1.
You can learn more about floating point value at
brainly.com/question/15025184
#SPJ4
The BIOS feature that enables a hard drive to read or write several sectors at a time is called what
IDE block mode is a BIOS setting that allows a hard disc to read or write many sectors at once. By enabling several sectors to read or write data, the IDE block mode setting speeds up IDE drivers.
Instead of using the standard single-sector transfer mode, this BIOS function speeds up hard disc drive travel. Instead of using the standard single-sector transfer mode, the IDE HDD Block Mode BIOS feature speeds up hard disc drive access by transmitting multiple sectors of data per interrupt. Block transfers are the name given to this method of data transport.
Block transfers are this type of transfer. Depending on the IDE controller, roughly 64 KB of data can be sent each interrupt when block transfers are enabled.
To learn more about BIOS click here:
brainly.com/question/28321945
#SPJ4
The BIOS feature that enables a hard drive to read or write several sectors at a time is called IDE block mode .
What is ide block mode ?
By sending many sectors of data per interrupt as opposed to the standard single-sector transfer mode, the IDE HDD Block Mode BIOS feature speeds up hard disk drive access. Block transfers are a type of data transport that uses this technique.
What is use of ide block mode ?
Hard disk drive access is sped faster by the IDE HDD Block Mode BIOS feature, which transfers multiple sectors of data per interrupt as opposed to the standard single-sector transfer mode. Block transfers are a type of data transport that uses this technique.
Learn more about ide block mode
brainly.com/question/14356230
#SPJ4
Create two PHP programs (input.php) and (output.php) that will input a number and print its square.
Answer:
<?php
$x=15;
$y=30;
$z=$x+$y;
A function ________ is a statement that causes a function to execute.
A) prototype
B) header
C) definition
D) call
E) parameter list
Exercise 3.3.7: Age points Your friend is about to have a birthday! Write a program that asks them how old they are. Once they enter their age, print how many candles they'll need for their birthday cake. (This should be one more than their current age.) You will have to use input to retrieve information from the user, and int to convert what they type into an integer. Finally, you'll have to alter their age variable to tell the user how many candles they will need. Here is what running your program should look like: Enter your age: 117 You will need this many candies for your birthday cake. 118
You have decided that the birthday cake for your niece will have one candle for each year that she has been alive. She will only be able to extinguish the tallest candles when she does so.
What is Program?You need to figure out how many candles she can blow out effectively. For instance, if your niece is turning four and the cake has four candles that are 3, 3, 1, and 2, she will be able to successfully blow out two of the candles because those are the highest candles, and there are four of them.
Name = input("Enter your name: ") # user input
current_age = int(input("Enter your age: ")) # user input
#calculating the 100th year, considering 2020 as the current year
hundredth_year = 2020 + (100 - current_age)
print(f'{name} will become 100 years old in the year {hundredth_year}.')
Therefore, You have decided that the birthday cake for your niece will have one candle for each year that she has been alive. She will only be able to extinguish the tallest candles when she does so.
To learn more about programe, refer to the link:
https://brainly.com/question/11023419
#SPJ1
_________ are/is the largest-volume application running over the internet.
The largest applications used on the Internet are those with the highest traffic volumes.
Which of the following pertains to employers and telecommuting?For supervisors, supervising a remote employee can be more challenging. The employee's productivity may suffer as a result of increased home interruptions. There's a chance you won't miss the of teamwork. The company's security may be at risk if it has a remote office.
What is the biggest social media site on the planet?The most popular social networking platform with 1.2 billion users globally. makes $2 billion in advertising revenue annually and has 17.7% display ads. is a service for microblogging that enables users to post messages of up to 140 characters each.
To know more about internet visit :-
https://brainly.com/question/14406711
#SPJ4
A(n) _____ is a published set of rules that govern the operation of a PKI.
A. signature resource guide (SRG)
B. enforcement certificate (EF)
C. certificate practice statement (CPS)
D. certificate policy (CP)
A(n) certificate policy (CP) is a published set of rules that govern the operation of a PKI.
What are the applications of PKI certificates?Data encryption and/or signing are both possible with the help of public key infrastructure (PKI), a system of procedures, tools, and regulations. A public key infrastructure is a structure that offers all the components required to permit users and entities to communicate in a secure and predictable manner. Public Key Infrastructure (PKI) contains four components: certificate authority (CA), registration authority (RA), RSA, and digital certificates. With PKI, you can issue digital certificates that authenticate the identity of users, devices, or services.
To know more about PKI visit:
https://brainly.com/question/14456381
#SPJ4
A disc on which you can write multiple times sometimes is called a ___ disc.A. single-sessionB. CD-ROMC. multisessionD. WORM
The term "multisession disc" can refer to a disc that can be written on more than once.
Which CD type allows for repeated writing?CD-R As a result, it can be read like a typical CD-ROM. A CD-ROM is a CD-R that has been written to. A re-usable, erasable compact disc is called a re-writeable compact disc. Numerous times can be recorded over and deleted the data on a CD-RW disc.
What is the name of a CD that can be burned multiple times?CD-R is an abbreviation for "CD-Recordable." Standard CDs and recordable CDs both use WORM (Write Once, Read Multiple) media. You can reuse discs by wiping them clean using a comparable technology called CD-Rewritable, although not all players support CD-RW media.
To know more about multisession disc visit :-
https://brainly.com/question/13749640
#SPJ4
Exercise 1.3.10: Team Rankings points Let's Go! Football Rankings The football season is here, and the standings are out! Unfortunately, the weekend's games have shuffled all the teams around. If you run the starter code now, you will get the variables in the original order Your task is to switch the teams around and get them in the new order. You should do this by switching variable values, not just retyping the names. Remember, a variable can only hold one volue, so you will need to use a temp variable to help make the switch. For example, if we wanted to switch team and team, we would swop values like this: 1 Swapping values tal = "! ton - TO Strine tenton tean, eu, tempo teten A te At OSU teate WOU", A OSU" Original order: 1. Alabama 2. Ohio State 3. Florida State 4 USC Let's Go! Exercise 1.3.10: Team Rankings Spointe . 1. Alabama 2. Ohio State 3 Florida State 4 USC 5 Clemson 6. Penn State 7 Oklahoma 8 Maryland 9. Wisconsin 10. Michigan New Order/Sample Output: 1. Alba 2. Penn State Maryland 4, Michigan SUSC 7. ". Risconsin 10. Ono state
Using the knowledge in computational language in JAVA it is possible to write a code that variable can only hold one volue, so you will need to use a temp variable to help make the switch.
Writting the code;File name: TeamRankings.java
Because in java class name and file name should be same
Java program:
import java.io.*;
import java.util.*;
public class TeamRankings
{
public static void main(String[] args)
{
/* Here we assign the given 10 team names in the question */
String team1 = "Alabama";
String team2 = "Ohio State";
String team3 = "Florida State";
String team4 = "USC";
String team5 = "Clemson";
String team6 = "Penn State";
String team7 = "Oklahoma";
String team8 = "Maryland";
String team9 = "Wisconsin";
String team10 = "Michigan";
/*Here we swap the values*/
String temp;
temp = team6;
team6 = team2;
team2 = temp;
temp = team8;
team8 = team3;
team3 = temp;
temp = team10;
team10 = team4;
team4 = temp;
temp = team10;
team10 = team5;
team5 = temp;
temp = team10;
team10 = team6;
team6 = temp;
temp = team9;
team9 = team8;
team8 = temp;
/* Here we print the output after swapping*/
System.out.println("1. "+team1);
System.out.println("2. "+team2);
System.out.println("3. "+team3);
System.out.println("4. "+team4);
System.out.println("5. "+team5);
System.out.println("6. "+team6);
System.out.println("7. "+team7);
System.out.println("8. "+team8);
System.out.println("9. "+team9);
System.out.println("10. "+team10);
}
}
See more about JAVA at brainly.com/question/29897053
#SPJ1
In your search for information on life in ancient Greece you find a web site with lots of direct quotes from Socrates and Aristotle. The site has photographs of their homes and their cities, and even has photographs of these men in their Halloween costumes. How would you use information from this web site
Any graphics, such as pictures, photographs, tables, diagrams, graphs, and figures, that you use in your work must be cited in the text.
What is the site's background?A website's background is often a picture, colour, or pattern that serves as the page's foreground while other website elements can be seen in the background.The best for thorough background checks. TruthFinder, a partner of ours. Get going. The best for customer reviews is the price. We work with Intelius. Get going. Cost. Top Mobile Experience. We work with BeenVerified. Get going. The best price for unlimited reports. Our partner, an instant checkmate. Cost. Get Started.Website backgrounds can either be body or content backgrounds. Most or all of the screen is covered by a body background. A picture, a graphic artwork, a single colour, a colour gradient, or a texture can all be used.To learn more about work refer to:
brainly.com/question/18094932
#SPJ4
