Answer: is B. Precision, accuracy
Explanation: Precision is the degree of exactness of a measurement; Accuracy describes how well the results of a measurement agree with the real value.
Brainiest Please
In the context of measurements, accuracy and precision are two different concepts that describe different aspects of the quality or reliability of the results obtained. The correct answer is A
Accuracy refers to how close the measured value is to the true or accepted value. It is a measure of how well the measurement reflects the actual quantity being measured. If a measurement is accurate, it means that it is on target and has a minimal deviation from the true value.
Precision, on the other hand, refers to the degree of exactness or consistency in the measurements. It measures the level of repeatability and reproducibility of the results. A precise measurement has very little variation or scatter between repeated measurements of the same quantity. Precision does not necessarily guarantee accuracy.
To summarize:
Accuracy relates to the closeness of a measurement to the true or accepted value.
Precision relates to the consistency and reproducibility of the results obtained.
In the given options, the correct answer is A: accuracy, precision. Accuracy describes how well the results of measurement agree with the real value, while precision is the degree of exactness of a measurement.
To know more about accuracy and precision:
https://brainly.com/question/34302810
#SPJ6
How much will a 200kg hippo accelerate if you push it with a force of 800 N?
Answer:
Explanation:
force = f, mass = m, acceleration = a
f = m a
m = 200 kg
f = 800 N
f = m a
800 = 200a
a = 800 / 200
a = 4
Hope this helps
plz mark as brainliest!!!!!!!
In a Young's double-slit experiment the separation distance y between the second-order bright fringe and the central bright fringe on a flat screen is 0.0177 m, when the light has a wavelength of 425 nm. Assume that the angles are small enough so that sin is approximately equal to tan . Find the separation y when the light has a wavelength of 560 nm.
Answer:
y = 0.0233 m
Explanation:
In a Young's Double Slit Experiment the distance between two consecutive bright fringes is given by the formula:
Δx = λL/d
where,
Δx = distance between fringes
λ = wavelength of light
L = Distance between screen and slits
d = Slit Separation
Now, for initial case:
λ = 425 nm = 4.25 x 10⁻⁷ m
y = 2Δx = 0.0177 m => Δx = 8.85 x 10⁻³ m
Therefore,
8.85 x 10⁻³ m = (4.25 x 10⁻⁷ m)L/d
L/d = (8.85 x 10⁻³ m)/(4.25 x 10⁻⁷ m)
L/d = 2.08 x 10⁴
using this for λ = 560 nm = 5.6 x 10⁻⁷ m:
Δx = (5.6 x 10⁻⁷ m)(2.08 x 10⁴)
Δx = 0.0116 m
and,
y = 2Δx
y = (2)(0.0116 m)
y = 0.0233 m
A power boat pulls a water skier 2.6 km maintaining a
tension of 250 N in the rope to the skier. How much work is
done on the water skier by the rope?
Answer:
W = 650 [kJ]
Explanation:
The definition of work is denoted by the product of force by the distance traveled by the body, this distance traveled corresponds to the direction of the force.
In this case we have:
d = distance = 2.6[km] = 2600 [m]
F = force = 250 [N]
W = F*d = 250 * 2600 = 650000 [J] or 650 [kJ]
A moon orbits a planet every 42 hours with a mean orbital radius of .002819 AU. The mass of the moon is 8.932 x 1022 kg. Using Newton’s modification to Kepler’s 3rd law, calculate the Mass of the Planet in kg.
Answer:
The mass of the planet is [tex]1.9407\times10^{27}\ kg[/tex]
Explanation:
Given that,
Time period = 42 hours = 151200 sec
Orbital radius = 0.002819 AU = 421716397.5 m
Mass of moon [tex]m=8.932\times10^{22}\ kg[/tex]
We need to calculate the mass of the planet
Using Kepler’s third law
[tex]T^2\propto a^3[/tex]
[tex]T^2=\dfrac{4\pi^2}{G(M+m)}\times a^3[/tex]
Where, a = orbital radius
T = time period
G = gravitational constant
M = mass of moon
m = mass of planet
Put the value into the formula
[tex](151200)^2=\dfrac{4\pi^2}{6.673\times10^{-11}(8.932\times10^{22}+m)}\times(421716397.5)^3[/tex]
[tex](8.932\times10^{22}+m)=\dfrac{4\pi^2}{6.673\times10^{-11}}\times\dfrac{(421716397.5)^3}{(151200)^2}[/tex]
[tex](8.932\times10^{22}+m)=1.94087\times10^{27}[/tex]
[tex]m=1.94087\times10^{27}-8.932\times10^{22}[/tex]
[tex]m=1.9407\times10^{27}\ kg[/tex]
Hence, The mass of the planet is [tex]1.9407\times10^{27}\ kg[/tex]
the summer camps had field from the campus to fragrance hill. they traveled at an average speed of 65 km/h in the first 2 hours. after that they traveled at another average speed of 78 km/h if the distance between the campus and fragrance hill is 364 km, what was the total time for a field trip
Answer:
5 hours
Explanation:
so if they traveled an average speed of 65 km/h then that means they traveled 130 km (2*65). Then the remaining distance to travel will be 364-130, or 234 km. If you travel at 78 km /h, then it will take you 234/78, or 3 more hours to reach Fragrance Hill. Add 2 and 3 to get a total of 5 hours
A runner runs the 100 meter dash in 16.6 seconds. What is their average speed? (in meters per second) SOMEBODY PLEASE HELP ME!!!
Formula: s = d/t
s = speed
d = distance
t = time
We are given the distance and time, so we can use that to solve for the speed.
s = 100/16.6
s ≈ 6.02m/s
Best of Luck!
Electric current passing through a human body can be dangerous, even fatal, depending on the amount of current, the duration of the current, and the region of the body through which the current passes. However, currents less than about 0.5 mA are typically imperceptible. A current caused by a low potential difference typically travels through the outer layer of the skin. The resistance of the skin therefore determines how much current flows for a given potential difference. The resistance can be influenced by a number of factors, including whether the skin is wet or dry. For example, suppose an electric current of 89.0 µA follows a path through the thumb and index finger. When the skin is dry, the resistance along this path is 4.70 ✕ 105 Ω. What voltage (in V) is required for this current, in the case of dry skin? V When the skin is wet, the resistance is lowered to 2,200 Ω. What voltage (in V) is required for the same current, in the case of wet skin? V
Answer:
V for dry skin = 41.83 volts
V for wet skin = 0.196 volts
Explanation:
The relationship between current and voltage is given as follows by Ohm's Law:
V = IR
where,
V = voltage
I = Current
R = Resistance
FOR DRY SKIN:
V = Vd = ?
I = 89 μA = 89 x 10⁻⁶ A
R = 4.7 x 10⁵ Ω
Therefore,
Vd = (89 x 10⁻⁶ A)(4.7 x 10⁵ Ω)
Vd = 41.83 volts
FOR WET SKIN:
V = Vw = ?
I = 89 μA = 89 x 10⁻⁶ A
R = 2200 Ω
Therefore,
Vd = (89 x 10⁻⁶ A)(2200 Ω)
Vd = 0.196 volts
please give the answer
Answer:
75
Explanation:
just took it e2020
Answer:
60%
Explanation:
efficiency= useful/input x 100%,
Here, kinetic energy is useful for food processor (i.e. spinning blades)
600J/1000J=60%
Whatcan you say to care our mother earth
Answer:
You can say, use public transportation
Given the hypothesis that the element zinc prevents cancer, which of the following procedures BEST exemplifies the nature of scientific investigation?
A- Analyze zinc, looking for different forms
B- Do research on zinc and its uses throughout history to determine if there is evidence that zinc prevents incidence of cancer
C- Rely on testimony of friends and relatives, as well as conduct a survey to see if there is a concentration of cancer in the people not taking zinc supplements
D- Give zinc supplements to a group of rats and not to another group. After a period of time, determine if there is a higher incidence of cancer in the control group
Answer:D
Explanation: i found the answer in an answer key!
Give zinc supplements to certain rats while withholding them from others. Determine whether the control group's cancer incidence has increased over time. Hence, option D is correct.
What is Scientific Investigation?Scientific investigation refers to the procedures and procedures used by scientists to create hypotheses, carry out experiments, collect and analyze data, and come to conclusions. Sometimes the evidence doesn't offer adequate answers, but it can raise fresh questions that need to be looked into. Scientific methods are employed by scientists primarily to conduct scientific research.
The steps in Scientific Investigation are :
Make some observationsAsk questions on basis of observationsMake a HypothesisCheck that HypothesisExtract ConclusionCommunicate the results.The hypothesis portion is the best way to define a hypothesis as a potential solution to a problem in science. Though it may be falsifiable, it is crucial that the hypothesis be rational. Observations that would contradict the hypothesis must be made if we want to show it to be false. In this case, we'll check to determine if the problem is with just one particular electrical item or with all of them.
To get more information about scientific Investigation :
https://brainly.com/question/12877466
#SPJ2
You have four identical conducting spheres: A, B, C, and D. In each scenario below, sphere A starts with a charge of -Q, sphere C starts out with a charge of Q, and spheres B and D start out neutral. Then the spheres are touched to each other and separated in the order described. Any spheres not in contact are held very far away. For each scenario, give the final charge of sphere C as a whole number fraction of Q. For example, if you decide that the final charge of sphere C is -Q/7, enter \"-1\" in the numerator and \"7\" in the denominator. Remember! Before each scenario begins, spheres A, B, C, and D are reset to charges of -Q, 0, Q, and 0 again.
Scenario 1: A and B touch and are separated, then A and C touch and are separated, then A and D touch and are separated.
Scenario 2: A and D touch and are separated, then D and C touch and are separated, then D and A touch and are separated, then A and B touch and are separated.
Scenario 3: A and B touch and are separated, then B and D touch and are separated, then C and D touch and are separated.
Answer:
1) Q_c = - ½ Q , 2) Q_c = + ¼ Q , 3) Q_c= 3/8 Q
Explanation:
For this exercise we must use that equal charges repel and charges with different signs attract. When two objects are in contact, the charges are evenly distributed between them.
Scenario 1.
when the two spheres touch the charge -Q is distributed between them, when separating each sphere has a charge = -1/2 Q
as there are no more interacts sphere C its charge is
Q_c = - ½ Q
Scenario 2
when the two spheres touch the charge -Q is distributed between them, when separating each one has a charge
Q_a = Q_d = - ½ Q
now the sphere D and C touch the charge is Q_net = -1/2 Q + Q = + ½ Q
when separating each sphere has half the charge
Q_d = Q_c = + ¼ Q
since sphere C has no more interaction, its charge is
Q_c = + ¼ Q
Scenario 3
A and B touch the net charge is Q_net = - Q + 0 = - Q
when parting
Q_a = Q_b = - ½ Q
now B and D touch, the charge is Q_net = - ½ Q +0 = - ½ Q
when parting
Q_b = Q_d = - ¼ Q
finally C and D touch
the net charge is Q_net = Q- ¼ Q = ¾ Q
when separating each one is left with half the load
Q_c = Q_d = 3/8 Q
Q_c= 3/8 Q
The __________ of exercise determines the health and fitness benefit of the exercise. A. frequency B. intensity C. time D. type Please select the best answer from the choices provided. A B C D
Answer:
c- Time
Explanation:
The time will tell depending on the person who is exercising, the rate of time, the workout time. & limits on weights....
Answer:
The guy above me is wrong the real answer is D
Explanation:
Explain why scientists use the International System of Units (SI)
Answer:
Scientist use the IS system to keep measurements that are identical and equivalent for all scientists across the world. The metric system can also be broken down easier and much clearer than Imperial units. This also clears up confusion if all scientists are using the same units and leaves less room for accidents in transferring measurements.
Explanation:
Distance vs Displacement
As an object moves, its location undergoes change. There are two quantities that are used to describe the changing location. One quantity - distance
accumulates the amount of total change of location over the course of a motion. Distance is the amount of ground that is covered. The second quantity -
displacement - only concerns itself with the initial and final position of the object. Displacement is the overall change in position of the object from start to
finish and does not concern itself with the accumulation of distance traveled during the path from start to finish.
True or False: An object can be moving for 10 seconds and still have zero displacement.
A. True
B. False
Answer:
A
Explanation:
Because u can just go back to where u started in just ten seconds
what does Conosive mean?
Answer: adjective. having the quality of corroding or eating away; erosive. harmful or destructive; deleterious: the corrosive effect of poverty on their marriage. sharply sarcastic; caustic: corrosive comments on the speaker's integrity.
Explanation:
A water skier has a mass of 86 kg and accelerates at 2 m/s2. What is the net force acting on him?
Ο Α.
0.0233 N
2
B.
43 N
C. 84N
D.
172 N
Answer:
F = 172 N
Explanation:
Newton's second law of motion gives the amount of force acting on an object. Mathematically, it is given by :
F=ma
Put m =86 kg and a = 2 m/s²
So,
[tex]F=(86\times 2)\ N\\\\F=172\ N[/tex]
Hence, the net force is 172 N.
Knowing that a ball traveled 16 feet in one second, how much will it travel in the first quarter second?
Answer:
4 Feet
Explanation:
Because A Quarter of 16 is 4
You really can't tell. You don't know if its speed was constant for the whole second, or whether it was accelerated, decelerated, intermittent, bouncing back and forth, etc. All you know is that after 1 second, it had moved 16 ft.
IF its speed was constant AND it moved in a straight line, THEN it moved 4 ft in the first quarter of that second.
If it rolled off of a roof and FELL 16 ft in the first second, then it fell 1 foot in the first quarter second.
The sound wave has a frequency of 426 Hz. What is the period? What is the wavelength?
Answer:
See below
Explanation:
Using the speed of sound in air as 343 m/s :
343 = wavelength * frequency
= wavelength * 426
wavelength = .81 meters
Period is just 1/frequency = .00235 seconds
how can we prove air in water
We can show that air is dissolved in water with the help of following activity: Take some water in a glass or metal container like pan and heat it. Just before water begins to boil, you will notice some bubbles at the inner surface of the pan. These bubbles come from the air dissolved in water.
A rock is thrown vertically upward from the origin of a reference frame. The rock reaches the peak of its trajectory and then it returns back to the origin where it comes to rest. Using the upward direction as positive, select True or False for the following statements. False The acceleration of the rock is negative throughout the whole motion. True The position of the rock is positive or zero throughout the whole motion. False The velocity of the rock is positive throughout the whole motion. False The acceleration of the rock is zero at the peak of the trajectory
Answer:
The acceleration of the rock is negative throughout the whole motion. (TRUE)
The acceleration of the rock is zero at the peak of the trajectory (FALSE)
The velocity of the rock is positive throughout the whole motion (FALSE)
The position of the rock is positive or zero throughout the whole motion (TRUE)
The velocity of the rock is positive throughout the whole motion (FALSE)
Explanation:
1)The acceleration of the rock is negative throughout the whole motion. (TRUE)
Using the upward direction as positive
Then, The acceleration of the rock is negative throughout the whole motion.
2)The acceleration of the rock is zero at the peak of the trajectory.(FALSE)
Only the velocity can be zero at the peak the trajectory, the acceleration is not zero
3)The velocity of the rock is positive throughout the whole motion (FALSE)
Using the upward direction as positive, The velocity of the rock is only positive when going in upward direction and vice versa
4)The position of the rock is positive or zero throughout the whole motion (TRUE)
When the rock get down it will have a zero position, then when it get to the peak it will have positive position
How does the electric potential energy between two negatively charged
particles change if one particle's charge is reduced by a factor of 3?
Explanation:
The electric potential energy is given by :
[tex]U=\dfrac{kq_1q_2}{r}[/tex]
k is electrostatic constant
r is the distance between charges q₁ and q₂
It is clear that the potential energy is directly proportional to the charges. It means if one particle's charge is reduced by 3, its electric potential energy is reduced by 3.
Answer:
Reduced by a factor of 3.
Explanation:
Which of these is an example of the conversion of kinetic energy into gravitational potential energy?
Group of answer choices
a bicyclist coasting down a long hill
a car engine moving the car forward
a roller coaster car moving toward the top of a rise in the tracks
a thrown ball falling toward the ground after passing through the top part of its motion
Answer:
a roller coaster car moving toward the top of a rise in the tracks
Explanation:
A roller coaster car moving toward the top of a rise in the tracks is an example of the conversion of kinetic energy into gravitational potential energy , therefore the correct answer is option C.
What is mechanical energy ?Mechanical energy is the combination of all the energy in motion represented by total kinetic energy and the total potential energy stored energy in the system which is represented by total potential energy .
As given in the problem we have to find out Which of these is an example of the conversion of kinetic energy into gravitational potential energy ,
A roller coaster car moving toward the top of a rise in the tracks is an example of the conversion of kinetic energy into gravitational potential energy , therefore the correct answer is option C .
To learn more about mechanical energy here , refer to the link ;
brainly.com/question/12319302
#SPJ6
A dog runs 3 miles and 4 miles west in 6 hours. What’s the dogs total distance and displacement ?
Complete question:
A dog runs 3 miles east and 4 miles west in 6 hours. What’s the dogs total distance and displacement ?
Answer:
The total distance covered by the dog is 7 miles
The displacement of the dog is 1 mile west
Explanation:
Given;
initial position of the dog = 3 miles east
final position of the dog = 4 miles west
time of motion, t = 6 hours
The total distance covered by the dog is given as;
Total distance = 3 miles + 4 miles = 7 miles
The displacement of the dog is given as;
displacement = final position of the dog - initial position of the dog
displacement = 4 miles west - 3 miles east = 1 mile west
A vehicle travels 53 km both north and east. What is the
vehicle's displacement?
75km
I dont really know how to do the math but thats what my teacher told me when i asked
When the vehicle travels 53 km both north and east, then the resultant displacement of the vehicle would be 74.95 kilometers.
What is displacement?An object's position changes if it moves in relation to a reference frame, such as when a passenger moves to the back of an airplane or a professor moves to the right in relation to a whiteboard.
Displacement describes this shift in location.
As given in the problem when the vehicle travels 53 km both north and east, then we have to find the resultant displacement of the vehicle,
The vehicle's displacement in the north direction = 53 kilometers
The vehicle's displacement in the east direction =53 kilometers
The resultant vehicle's displacement= √(53² + 53²)
= √5618
= 74.95 kilometers
Thus ,the resultant displacement of the vehicle is 74.95 kilometers in the northeast direction.
Learn more about displacement here, refer to the link;
brainly.com/question/10919017
#SPJ2
A student releases a marble from the top of a 130cm ramp. The marble increases speed steadily and reaches the bottom of the ramp with a speed of 140cm/s. Determine all unknowns and answer the following question.
How long did the marble take to reach the bottom of the ramp?
PLZ HELP ASAP
Explanation:
V=p/t
t=p/V
p=130cm
V=140cm/s
t=130/140s = 13/14s
Suppose that 4 charged particles, all having a positive charge Q, are placed and fixed at the vertices of a square, where every side has a length a.
(a) What is the electric potential at the center of this arrangement? You can use any of the symbols already provided to you when typing your answer, in addition to the symbol ke and any numbers. [NOTE: The symbol ke must be typed with e as a subscript on k to receive credit. Simply typing "ke" will not suffice.]
(b) Now imagine that we introduce a new charge, called q. How much potential energy would this charge have if it were placed at the center of the square? You can use any of the symbols already provided to you when typing your answer, in addition to the symbol ke and any numbers.PE =
Answer:
+%_×¥+₩ £kshnow sjsni niadk lplz kfkd skidk skkkim
When a technician touches a _____ it is the most dangerous, and likely to cause serious injury. a. live conductor with his right hand and touches a ground with his left hand b. live wire with his hand but is standing on an insulated platform c. live wire with his right hand and accidentally touches his right elbow on the metal of the same unit d. ground with his thumb and a live wire with his index finger
Answer: live conductor with his right hand and touches a ground with his left hand
Explanation:
When a technician touches a live conductor with his right hand and touches a ground with his left hand, it is the most dangerous, and likely to cause serious injury.
This is because when the person touches the live conductor, there will be an electrical path which will allow current flow with the aid of the person's body. This is because the body of human being is a conductor. Therefore, when the technician touches the live conductor with his right hand and touches a ground with his left hand, an electrical path is created.
1
Find the x-component of this
vector:
Help Resources
0.250 m
18.4°
Skip
Remember, angles are measured from
the +X axis.
x-component (m)
Answer:
x-component = 0.237 [m]
Explanation:
In order to solve this problem in an easy way, we must first make a sketch of the vector and its respective angle with the X-axis, in the attached image we can see that sketch.
Since the X component of the vector is needed, this component can be found by means of the cosine of the angle and its hypotenuse.
x-component = 0.250*cos(18.4)
x-component = 0.237 [m]
Answer:
x = 0.237
y = -0.0789
Explanation:
You are standing on a scale in an elevator that is moving upward with a constant velocity. The scale reads 600 N. The following table shows five options for what the scale reads when the elevator slows down as it comes to a stop, when it is stopped, and when it picks up speed on down. Which one of the five options correctly describes the scale's readings? Note that the symbol < means "less than" and > means "greater than."
Option Elevator slows down Elevator is stopped Elevator picks up speed
as it comes to a half on its way back down
(a) >600 N >600 N >600 N
(b) <600 N 600 N <600 N
c) >600 N 600 N <600 N
(d) <600 N <600 N <600 N
(e) <600 N 600 N >600 N
Answer:
C. >600 N 600 N <600 N
Explanation:
The scale's reading when when the elevator slows down as it comes to a stop, when it is stopped, and when it picks up speed on down is >600 N, 600 N, <600 N respectively.
To understand this we have to first understand weight.
What is weight?Weight is a product of mass and gravitational acceleration.Weight W = mg , where m = mass of an object , g = gravitational acceleration.The gravitational force increases as the height of an object increases.What happens to scale's reading when an elevator changes its position? The scale's reading is 600 N.When an elevator goes upwards and slows down , the Earth's gravity pulls it down so the force will be 600 N + force applied by earth so it will be >600 N.When an elevator stops it is at its natural height so, the force will be 600 N.When an elevator picks up speed on down, the force will be less than 600 N so it will be <600 N.So, the scale's reading is >600 N 600 N <600 N, hence the correct answer is option C.
Learn more about gravity here -
https://brainly.com/question/88039
#SPJ2
If the total time is 120 seconds and the total distance is 320 meters. Calculate
the average speed (show work)
Answer:
S=D/T
320/120= 2.66 miles
Explanation:
