Answer:
B. They are precise but not accurate.
Explanation:
I got it right on edge 2020
Answer:
b
Explanation:
Which pure substance can be classified as an element?
H2
NO3
NaCl
H2SO4
Answer:
H2
Explanation:
on edge
How many atoms are in 3AsBr3
Answer:
the answer is 18 atoms [your welcome]
Help ASAP!!
Chlorine's 3p sublevel has 5 electrons in it. It needs _____ electron(s) more in the 3p sublevel to make it stable.
a). 5
b).4
c).3
d).2
e).1
Given :
Chlorine's 3p sub level has 5 electrons in it.
To Find :
How many electron(s) more in the 3p sub-level to make it stable.
Solution :
Electronic configuration of Chlorine is :
[Ne] 3s² 3p⁵.
We know, p-orbit is stable with 6 electronic.
Therefore, to stable p-orbit 1 more electron is required in 3p sub-level.
Hence, this is the required solution.
A hypothetical element consists of four isotopes. Use the information below to calculate the average atomic volume mass of the element. Work must be shown for credits to be given.
Answer:
104.969 amu.
Explanation:
From the question given above, the following data were obtained:
Isotope A:
Mass of A = 107.977 amu
Abundance (A%) = 0.1620%
Isotope B:
Mass of B = 106.976 amu
Abundance (B%) = 1.568%
Isotope C:
Mass of C = 105.974 amu
Abundance (C%) = 47.14%
Isotope D:
Mass of D = 103.973 amu
Abundance (D%) = 51.13%
Average atomic mass =?
The average atomic mass of the element can be obtained as follow:
Average atomic mass = [(Mass of A × A%) /100] + [(Mass of B × B%) /100] + [(Mass of C × C%) /100] + [(Mass of D × D%) /100]
Average atomic mass = [(107.977 × 0.1620)/100] + [(106.976 × 1.568)/100] + [(105.974 × 47.14)/100] + [(103.973 × 51.13)/100]
= 0.175 + 1.677 + 49.956 + 53.161
= 104.969 amu
Therefore, the average atomic mass of the element is 104.969 amu.
Please help ASAP! PLEASE DO NOT GIVE ME A RANDOM GIBBERISH ANSWER OR ELSE I WILL REPORT YOU AND GIVE YOU A LOW RATING!!!
If you're unsure of the answer just type it in the comments.
QUESTIONS:
QUESTION 1:
If the mass and volume of an object is very HIGH will the object sink or float?
QUESTION 2:
If the mass and volume of an object if very LOW will the object sink or float?
Please answer this as soon as possible, as these questions need to be done right now!
Answer:
if an object weighs more than an equal volume of water, it is more dense and will sink, and if it weighs less than an equal volume of water, it is less dense and will float.
Explanation:
Hope that helps
How many grams of sugar are in 200 g of a solution that is 15% sugar by mass
Answer:
Of the solution, 30g of it is sugar.
Explanation:
15% = 0.15
200 * 0.15 = 30
Best of Luck!
is change color when mixed with water a physical or chemical property?
Give reasons for your answer.
Explanation:
Color. The changing of color of a substance is not necessarily an indicator of a chemical change. For example, changing the color of a metal does not change its physical properties. However, in a chemical reaction, a color change is usually an indicator that a reaction is occurring.
What is the difference between a heterogeneous mixture and a solution?
Answer:
Difference between a heterogeneous mixture and a solution ( homogenous mixture) is that a homogenous mixture has uniform composition throughout the mixture, whereas heterogeneous mixture has varying composition throughout the mixture.
ASAP MULTIPLE CHOICE
Who discovered the electron?
J.J. Thomson
John Dalton
Antoine Lavoisier
Robert Millikan
What is a phenotype?*
Answer:
Phenotype is the term used in genetics for the composite observable characteristics or traits of an organism. The term covers the organism's morphology or physical form and structure, its developmental processes, its biochemical and physiological properties, its behavior, and the products of behavior.
Explanation:
I HOPE IT HELPED
Answer:
Explanation:
Just for future reference here's an easy way to remember it PHenotype is the PHysical characteristics
and here's the actual definition: the set of observable characteristics of an individual resulting from the interaction of its genotype with the environment.
can sb helppppppppppppp
Explanation:
Copper does not react with HCl to give H2 gas.
Which statement describes the differences between nuclear reactions and chemical reactions?
Answer:
Nuclear reactions involve a change in an atom's nucleus, usually producing a different element. Chemical reactions, on the other hand, involve only a rearrangement of electrons and do not involve changes in the nuclei.
Answer:
the answer is C
Explanation:
What is a polar and non-polar molecules?
Answer:
[tex]\huge\blue{answer}[/tex]
Polar molecules occur when there is an electronegativity difference between the bonded atoms. Nonpolar molecules occur when electrons are shared equal between atoms of a diatomic molecule or when polar bonds in a larger molecule cancel each other out.
Explanation:
hope it helps u mate
Classify each living thing of bacteria Please hurry
ASAP MULTIPLE CHOICE
What did Robert Millikan discover?
the nucleus of the atom
the mass of an electron
the charge-to-mass ratio of the electron
the charge of a neutron
Answer:
b. the mass of an electron.
Explanation:
Why do all polar/polar and non polar/non polar mixtures dissolve when mixed together
Answer:
[tex]\huge\blue{answer}[/tex]
Because water is polar and oil is nonpolar, their molecules are not attracted to each other. ... Because water molecules are polar, they interact with the sodium and chloride ions. In general, polar solvents dissolve polar solutes, and nonpolar solvents dissolve nonpolar solutes.
Explanation:
hope i helps u
would you be able to see the rock in a room with no light at all? why or why not ?
Answer: hope it helps
no you would not be able see the rock in the room because if you close the lights its going to be dark unless you have a glow in the dark light.
Explanation:
1
Graphs are tools that help:
A
Organize data
B
Perform calculations
С.
Solve problems
Gather information
Answer:
B
Explanation:
Graphs are tools that help in performing calculations as they reduce the source of errors which is done in long mathematical calculations.
What are errors?
Errors in chemical analysis result when there is a difference between observed value and the true value.If the magnitude of errors is large , it results in decrease in accuracy, reproducibility, and precision.
There are three types of errors:1) random error 2) systematic error 3) human error.The cause of random errors are difficult to quantify while the human errors can be minimized by taking a range of readings to reduce the error.
Errors while measuring boiling point may be human errors while noting down the boiling temperature or instrumental or systematic error if there is a fault in the thermometer.
Learn more about errors,here:
https://brainly.com/question/15810279
#SPJ2
Dissolution of wax in kerosene
Answer:
the first answer is correct don't forget you can use quizzlet app to
What is the apparent relationship between density and hardeness
Since hardness measurement involves only surface of the material, bulk density of the material does not have any explicit relation with the hardness. Materials are usually subjected to microstructural and/or chemical changes in the surface by carbiding, nitriding and other processes, many times by cold working.
The structure of the surface of the material is almost always different from the structure inside the bulk, it would be a very complicated and complex relationship, if anyone ever tries to establish it and may not prove that beneficial also
Which of the following best describes the particles that make up lightning and the particles that make up the water in a bottle?
Those in lightning are charged and those in water are not charged.
Those in lightning slide past one another and those in water bounce off and collide against each other.
Those in lightning are only negatively charged and those in water are only positively charged.
Those in lightning are tightly held in position and those in water bounce off and collide against each other.
Answer:
Those in lightning are charged and those in water are not charged.
Explanation:
The particles in lightning differs from those in a water in that water molecules are neutral and those of lightning are charged.
Lightning is made up of charged ions or particles that have either lost or gained electrons.
Lightning is produced as a burst or discharge of charged particles that are imbalanced withing the clouds.
Water molecules are made up of hydrogen and oxygen atoms which forms molecules held together by strong intermolecular and interatomic bonds.
Due to the sharing of electrons that has made this bonding possible, there is a net charge balance which leads to a neutrality.
Water is electrostatically neutral and not charged.
Answer:
Those in lightning are charged and those in water are not charged. Hope this helps! Brainliest plz! If you want :)
Explanation:
An object is most likely to sink in water if____
Answer:
It's denser
Explanation:
When something is denser than another substance, it sinks into the substance.
Which of the following in NOT a part of the integumentary system:
a
b
heart
glands
hair
d
nails
Answer:heart
Explanation:
Which best characterizes a crystal?
a number of high speed particles moving randomly
a dense substance that is hard and incompressible
a high-energy state of matter made up of a swirling, ionized gas
a loose association of particles moving past one another
Answer:
A dense substance that is hard and in compressible
Explanation:
I just took the unit review on edge
Answer:
B
Explanation:
For Edge:)
Which element must an organic compound contain?
bromine
chlorine
iodine
carbon
Answer: D.) Carbon
Explanation: Carbon is an organic compound, any of a large class of chemical compounds in which one or more atoms of carbon are contently linked to atoms of other elements, most commonly hydrogen, oxygen, or nitrogen.
What’s the answer!?!!
Answer: generic material and protein coat. Have a great day
Explanation:
Matthew records the temperature outside for one day. From 10:00 a.m. to 12:00 p.m., the
temperature rises 4°C. From 12:00 p.m. to 2:00 p.m., it rises another 3°C. From 2:00 p.m. to 4:00
p.m., it drops 2°C. Which of the following predictions about how the temperature will change
between 4:00 p.m. and 6:00 pm. is most reasonable?
The temperature will rise 3°C.
The temperature will drop 14°C.
o the temperature will stay the same
The temperature will drop 4°C.
Answer:
The temperature will drop 4°C.
Explanation:
Note that this question is describing temperature change in response to the time of the day. Ideally, mornings to afternoons are usually hotter while evenings are colder.
According to this question, the temperature rises by 4°C from 10:00 a.m. to 12:00 p.m. it also rises another 3°C from 2:00 p.m. to 4:00 p.m but starts dropping by 2°C from 2:00pm to 4:00pm. This shows that between the hours of 10:00am - 2:00pm, the temperature increases as a result of the heat from sun. However, towards the evening period, the temperature reduces because the sun is getting shadowed by the moon.
Hence, based on this analogy, the most reasonable prediction about how the temperature will change from. 4:00am to 6:00am is that The temperature will drop 4°C.
Which is the best description of a computer virus?
O a program that can damage a computer
O a hacker who adds programs to a computer
a scam that steals information from a computer
a biological disease that destroys a computer
The best discription of a computer virus is that it is a program that can damage a computer.
What is computer virus?A computer virus is a sort of computer software that repeats itself by altering other computer programs and injecting its own code when it is run.
So it is a type of program which can damage a computer.
Virus is not a program that can be added by hacker.It is also not a scam that steals information.And it is also not a biological disease.Hence virus is a program that can damage a computer.
To know more about computer virus, visit the below link:
https://brainly.com/question/20407534
#SPJ2
Answer: It's A: a program that can damage a computer
Explanation:
An empty paper cup is the same temperature as the air in the room. A student fills the cup with cold water. Which of the following describes how thermal energy is transferred?
Answer:
Thermal energy is transferred from the cup to the cold water until they are at the same temperature
Explanation:
The second law of thermodynamics states that the entropy of an isolated system can only remain constant or increase, and will have a decreased potential energy than its initial state and also indicating that heat, or thermal energy, can only spontaneously flow from a hotter body to a colder body so as to attain thermal equilibrium
Therefore since the cup and the water form a thermodynamic system, with water being the colder body and the cup being the relatively hotter body, thermal energy can only be transferred from the cup to the cold water until they both reach thermal equilibrium or until they are at the same temperature.
A soda has a volume of 225 ml and a density of 3.2 g/ml. What is the mass
Answer:
The answer is
720 gExplanation:
The mass of a substance when given the density and volume can be found by using the formula
mass = Density × volumeFrom the question
volume = 225 mL
density = 3.2 g/mL
The mass is
mass = 3.2 × 225
We have the final answer as
720 gHope this helps you