Potential Energy is energy due to _____________.​

Answers

Answer 1

Answer:due to

Explanation:

To summarize, potential energy is the energy that is stored in an object due to its position relative to some zero position. An object possesses gravitational potential energy if it is positioned at a height above (or below) the zero height.


Related Questions

Describe how could you use an electromagnete to sort a mixture of iron and copper pieces into two seprate piles of iron and copper

Answers

Answer:

Electromagnetic cranes are used to separate copper from iron in a scrap yard. The current is switched on to energies the electromagnet and pick up the iron pieces from the scrap. Then these iron pieces are moved to another position, the electromagnet in switched off and the iron pieces are released.

Explanation:

while riding in a car, you notice some fuzzy dice hanging from the review mirror. the car is traveling at a constant speed. according to newton's first law, what will happen when the car stops suddenly.

A. the dice move to the right
B. the dice move forward
C. the dice move backwards
D. the dice move to the left ​

Answers

Answer:

I need points thank you

Based on the displacement graph below, which divider is likely to experience the greatest negative acceleration?

A. The divider originally located at 1 unit.
B. The divider originally located at 4 units.
C. The divider originally located at 7 units.
D. The divider originally located at 10 units.

Answers

A or C because there the lowest will say

Answer:

The answer I'ts going to be A

Explanation:

because i just did it lol

During the rock cycle, cooling magma and lava from igneous rock, heat and pressure cause other rocks to turn into metamorphic rock, and weathered rock on the surface is eventually turned into sedimentary rock. Rocks move through this cycle at different rates, but it can take some rocks several billion years to complete the cycle. Using this information, what is the most likely reason why scientists use models to study the rock cycle?


A. The rock cycle only affects objects that are too small to be observed directly.


B. The rock cycle is only an abstract idea and does not actually occur in nature.


C. The rock cycle no longer occurs on Earth.


D. The rock cycle takes too long to be able to observe it in entirety.

Answers

The answer is A the rock cycle only affects objects that are too small to be observed directly

Answer:

D. The rock cycle takes too long to be able to observe it in entirety.

Explanation: is answer

Mass (kg)
2
4
6
8
12
15
Weight
(N)
20
35
55
70
105
135
What is the independent variable in this experiment

Answers

Mass.

Because mass doesn't depend on weight but weight depends on mass.

Mass is the answer to this

10. An object of a mass 300 KG is observed to accelerate at the rate of 4M/S2. Calculate the force required to produce this acceleration.

Answers

Answer:

1200 Newton

Explanation:

Force is equal to mass times acceleration

please mark me brainliest

a 3.2 kg durian fruit is pushed across the table.If the acceleration of the durian is 3.1 m/s/s to the right,what is the net force exerted on the fruit?(Fnet=ma)​

Answers

Answer:

9.92 N

Explanation:

The force acting on an object given it's mass and acceleration can be found by using the formula

force = mass × acceleration

From the question we have

force = 3.2 × 3.1

We have the final answer as

9.92 N

Hope this helps you

Answer:

9.92

Hope I helped

Car's mass is 950kg. It's driven at 100km/h. How big is the kinetic energy?

Answers

Answer:

4750000 J

Explanation:

Kinetic Energy= 1/2* mass* velocity²

1/2*950*100²=4750000

help me please thank you​

Answers

Answer:

B

Explanation:

mechanical wave that is the answer

Hope this helps plz hit the crown :D

Answer:

B

Explanation:

The answer is the mechanical wave.

What is the current produced by a potential difference of 210 volts through a resistance of 3 ohms?

Answers

Answer:

70 amperes

Explanation:

Ohm's Law: V = IR

I = V/R = 210/3 = 70 A

Current produced by a potential difference of 210 volts through a resistance of 3 ohms is 40 A.

What is Ohms law ?

Ohm's law states that the potential difference across a conductor is directly proportional to the current flowing through it.

i.e. V [tex]\alpha[/tex] I

V = RI where R is a constant of proportionality called as resistance of a conductor. it opposes flow of current.

ohm's law gives the voltage drop across a resistor.

large resistor gives large voltage drop across it.

Given,

V = 120 Volt

R = 3 ohms

I = ?

V = IR

120 = 3 I

I = 40 A

Hence current produced is 40 A.

To know more about current, click :

https://brainly.com/question/30748946

#SPJ3.

What is the mass of a cow moving at a velocity of 0.5 m/s with 25J of kinetic energy? Show work

Answers

Answer:

200 kg

Explanation:

Answer:

m= 50

Explanation:

m=f/a    this is the formula for mass

m= 25/0.5    you substitute the numbers with their variables   they you divide them to get the mass

m= 50

Which forces are acting on the student and the skateboard in the instant in which they are pushing off the wall? (Select all that apply)
A. The force of the student pushing the wall
B.The force of gravity on the skateboard and the student
C.The force of the wall pushing on the student
D. The force of the floor pushing on the skateboard and the student
or E. Select all of the above

Answers

E all of the answers above correlate to the student and his skateboard


A rock thrown to the right with an initial horizontal velocity of 4 m/s lands after 5
seconds. What horizontal distance has the rock traveled?

Answers

Answer:

20m

Explanation:

Using the equation s=d/t and re arranging it to solve for distance, d=St, where d=distance, s=speed, ant t=time, we can plug in known variables.

d=4*5

d=20m

there is a distance of 20m traveled

The horizontal distance traveled by the rock is 20 m

For horizontal motion, we use the formula below

⇒ Formula

s = vt.................... equation 1

⇒ Where

S = horizontal distance traveled by the rockv = velocity of the rockt = time

From the question,

⇒ Given:

v = 4 m/st = 5 seconds

⇒ Substitute these values into equation 1

s = 4×5s = 20 m

Hence, The horizontal distance traveled by the rock is 20 m

Learn more about horizontal motion here:

Pleaaseeee hellppp !!!

Answers

Answer + Explanation:

The answer is B, because once you get to the top, your potential energy (no movement) will pause at the top, and right when you drop, it'll convert to kinetic energy.

i'm very sorry if i gave you the incorrect answer, but if it's not B then it's either A or C-...

EXPLAIN how a thermostat uses electric energy, mechanical energy , and thermal energy

Answers

The appliances with thermostat are designed in such a way that it will provide heat waste energy by converting electrical energy to thermal energy. ... It converts thermal energy into mechanical energy. The nightlight that is used, converts electrical energy to visible light, which is a form of radiant energy.

Mass and weight are the same in
meaning and unit.

true or false

Answers

Answer:

False.

Explanation:

Mass is how much space an object takes up, while weight is how light or heavy an object is.

A comparison of a machine’s work output with its work input is called __??__.

Answers

ohhhhh its called a input machine

A 5.0 Newton force is applied to the right of a 6.0 kg object to move across a smooth surface. The coefficient of friction is zero. a. Draw and label all of the forces acting on the object b. Calculate the acceleration of the object

Answers

Answer:

[tex]0.833\ \text{m/s}^2[/tex]

Explanation:

m = Mass of block = 6 kg

F = Force on block = 5 N

[tex]\mu[/tex] = Coefficient of friction = 0

a = Acceleration of the block

From Newton's second law we have

[tex]F=ma\\\Rightarrow a=\dfrac{F}{m}\\\Rightarrow a=\dfrac{5}{6}\\\Rightarrow a=0.833\ \text{m/s}^2[/tex]

The acceleration of the block is [tex]0.833\ \text{m/s}^2[/tex]

Se coloca una tuerca con una llave, como muestra la figura, si el brazo r= 30 cm y el torque de apriete recomendado para la fuerza es de 30 Nxm, Cuàl debe ser el valor de la fuerza F aplicada?

Answers

Answer:

F = 100 N

Explanation:

The torque is given by the expression

      τ = F x r

where bold letters indicate vectors, the magnitude of this expression is

     τ = F r sin θ

In general, when tightening a nut, the force is applied perpendicular to the arm, therefore  θ = 90 and sin 90 = 1

      τ = F r

      F = τ / r

calculate

      F = 30 / 0.30

      F = 100 N

A heat engine is a device that converts heat into work.
OA. True
OB. False

Answers

Answer:

A, True.

Explanation:

A heat engine converts heat into mechanical energy.  

Answer:

True

Explanation:

I've just answered this on a quiz

A 15 cm wrench is used to screw in a bolt. If 30 n of force is applied to it at a 45 degree angle, how much torque is applied? (Round to the nearest tenth)

Answers

Answer:

3.18 Nm

Explanation:

Given that:

Radius (r) = 15cm = 15/100 = 0.15m

θ = 45°

Applied force (F) = 30 N

The Torque can be obtained using the relation :

T = rF * sinθ

T = 0.15 * 30 * sin(45)

T = 0.15 * 30 * 0.7071067

T = 3.18198015

T = 3.18 Nm

how much heat must be absorbed by 375g of water to raise its temperature at 25°C?​

Answers

Answer:

kJ = 1000J

Explanation:

The formula q = 375 g × 25 C × 4.186 J / (g×C) = 39,243.75 J represents the heat in Joules, m the mass in grams, difference of temperature in Celsius degree, and 4.186 J/(g×C) is the specific heat of water. I assumed the water is liquid from and will remain liquid). Approximately 39.24 kJ once you round and transform to kJ = 1000J.

Can an object with constant also be accelerating?

Answers

Answer:The velocity vector is constant in magnitude but changing in direction. Because the speed is constant for such a motion, many students have the misconception that there is no acceleration. ... For this reason, it can be safely concluded that an object moving in a circle at constant speed is indeed accelerating.

Explanation:

The velocity vector is constant in magnitude but changing in direction. Because the speed is constant for such a motion, many students have the misconception that there is no acceleration. ... For this reason, it can be safely concluded that an object moving in a circle at constant speed is indeed accelerating.

plzz help
which causes an object in motion to remain in a motion?
a.gravity
b.velocity
c.friction
d. inertia​

Answers

Answer:

Friction is ur ans

Explanation:

Friction is the external force that acts on objects and causes them to slow down when no other external force acts upon them. Inertia is the tendency of a body in motion to remain in motion.

Inertia causes an object in motion to remain in motion as per the law of inertia.

What is motion?

Motion is defined as a phenomenon which is described with respect to change in object's position with respect to time.It is given in terms of displacement,velocity,distance ,acceleration,speed.

Branch of physics which deals with motion of objects without any reference to it's cause is called kinematics while the branch which studies forces and their effects on motion is called as dynamics.

Motion applies to various systems like objects,bodies, matter particles ,radiation ,curvature.There are three laws of motion which are proposed by Newton.Classical mechanics is based on Newton's law of motion.Relativistic  mechanics is based on modern kinematics.

Learn more about motion,here:

https://brainly.com/question/3421105

#SPJ5

Increasing your workload a little bit is called?
A progression
B regularity
C overload
D specificity

Answers

A. Progression

happening or developing gradually or in stages; proceeding step by step.

Answer: A

Explanation:

You push really hard against a round rock, but you cannot make it roll. Which statement best explains why you cannot move the rock

Answers

Answer:

b

Explanation:

a Gravity pulls the rock toward the center of Earth.

b The forces between you and the rock are balanced.

c The force of your push is greater than the opposing force.

d There is no friction to help you move the object.

The correct answer would be that the forces between you and the rock are balanced.

In order to get the rock rolling, both the frictional force between the rock and the surface on which it stands as well as the gravitational force acting on its mass must be exceeded. If the applied force balances these forces or falls short, the rock will not move.

The correct option is b.

the time rate of change of momentum is equal to

Answers

Answer:

the time rate of change of momentum is equal

Answer:

the time rate of change of momentum is equal to the force acting on the particle.

Explanation:

hope this is helpful :)

the distance between two electric pole is 800m then express this in terms of mm​

Answers

Answer:

Mm stands for milimetres

Explanation:

Answer:

800,000mm

Explanation:

1m = 1000mm

800 × 1000 = 800,000mm

PLEASE HELP! WILL GIVE BRAINLY Which of the four fundamental forces acts over very long distances but does
not cause planets in the solar system to pull on each other?
A. Gravitational
B. Weak nuclear
C. Strong nuclear
D. Electromagnetic
SUBMIT

Answers

Answer:

Electromagnetic

Explanation:

Just got it correct

The electromagnetic force of the four fundamental forces acts over very long distances but does not cause planets in the solar system to pull on each other. The correct option is D.

What is electromagnetic force?

It is a type of force that occur between electrically charged particles. The electromagnetic force is the combination of all the electrical and magnetic forces generated from any charged particle.

The electromagnetic force is a long-range force that can either be attractive or repulsive.

As we know electromagnetic force is a long-range force but does

not cause planets in the solar system to pull on each other, therefore the correct answer is D.

Learn more about electromagnetic forces

brainly.com/question/13191643

#SPJ5

What is the average speed of a runner who completes a 400 m lap in 80 s?

Answers

400 divided by 80 will give you the answer!

Other Questions
Brainiliest Solve For x. x_ = 440 A) 16 B) 36C) 160D)176 How was disease helpful to the Europeans in the late 1400s and early 1500s?O It caused new civilizations to rise.O It affected people only in the Americas.O It forced American Indians to trade with Europeans.O It weakened American Indian military power. guess the song Let's goWhen I'm cloning with my doppelgangers Racking up the numbersSee you wonder If you ever gonna beat me See these hands Put em into motion Making Ninjas understand I'm the strongest in the land like what better than a Sharingan? I need help guys?..... A jar contains four orange marbles numbered one to four. The jar also contains four green marbles numbered oneto four. You randomly pick a marble. It is orange or has a number less than three.Determine if the scenario involves mutually exclusive events. Then find the probability. define animal husbandry on what interval is the function h(f)=|x+2|-2 increasing ? BRAINLY TO WHOEVER ANSWERS!1!!!(complete sentences please)how did west coast workers relate to the westward expansion?what was the main idea of the west coast workers? Disinfectants must be used on:All surfaces in a child care homeAnything that comes in contact with bodily fluids or wasteBathroomsToysDishes Which is NOT a factor for how much you will need to pay for gas? A. How many MPG the car gets B. How much your insurance costs C. How often and far you drive D. Gas prices what happened after mr.linden eeeeeee someone help Please help me with this Jaden measured the length of a book to be 29 cm. The actual length of the book is 27 cm.What is the percent error for Jaden's measurement? According to the passage in Source 1, farming was crucial to the development of theEgyptian civilization. What is the most critical aspect of the farming process in Egypt? can somebody explain what is that question asking. Fix this problem, please. Zoom it in if u cant seeBut what is the slope plz help I have only 5 minutes A disadvantage of technology leadership is infrastructure costs. harm to reputation. high competition. lower profit margins. decreased efficiency. Solving equations -2(x+3)=3(2x-10)