Some On Resonance Structures 1,46 Creatine is a dietary supplement used by some athletes dietary supplement used by some athletes to boost their athletic performance. (a) Draw in all lone pairs in creatine. (b) Draw two additional resonance structures showing all lone pairs and formal charges. NHA creatine

0.01 is the mole fraction of glucose (180.0 g/mol) in a 10.0% aqueous glucose solution.

The example of the mole fraction. 2.82 g of glucose is dissolved in 30 g of water. The mole fraction of glucose in the solution is: An Aq. solution has urea and glucose in mass ratio 3:1 and water and glucose in 10:1 then mole fraction of glucose is. A solution is prepared by dissolving 5.64 g of glucose in 60 g of water. mole fraction is the ratio of number of moles of some element and to the number of moles of the whole solution and then we will get our desired mole fraction of the number of moles of an element to the number of moles to the solution. mole fraction has no dimensions, hence it is dimensionless. By this information, we can firmly consider that 0.01 is the mole fraction of glucose (180.0 g/mol) in a 10.0% aqueous glucose solution.

Learn more about Mole concept:

brainly.com/question/29808190

#SPJ4

Magnesium iodide will dissociate into 1 mole of Mg2+ M g 2 + and 2 moles of I− . This means that it has a Van't Hoff factor of 3.

MgCl2 dissociates into three ions when it dissolves in water, giving it a theoretical van't Hoff factor of 3. The van't Hoff factor for MgCl2 is normally tested at a value of no more than 2.7.

The van 't Hoff factor is virtually 1 for the majority of non-electrolytes dissolved in water. The van 't Hoff factor for the majority of ionic compounds dissolved in water is equal to the number of discrete ions in the substance's formula unit.

Only perfect solutions can claim this as ion pairing occasionally happens in solutions. The quantity of ions that develop during the dissociation of an ionic molecule is known as the van't Hoff factor. In the case of a non-ionizing molecule, the van't Hoff factor is 1. 

To learn more about van't Hoff factor refer to:

https://brainly.com/question/22047232

#SPJ4

The amount, in grams, of [tex]NH_3[/tex] produced with 16.7 grams of nitrogen reacting would be 40.63 grams.

The balanced equation of the reaction shows that the mole ratio of nitrogen that reacts to ammonia produced is 1:2.

Recall that: mole = mass/molar mass. The molar mass of nitrogen is 14.

Thus, mole of 16.7 grams nitrogen = 16.7/14 = 1.192857 mol

From the mole ratio, the equivalent mole of ammonia that is produced would be: 1.192857 x 2 = 2.39 mol

Mass of ammonia = mole x molar mass. the molar mass of ammonia is 17 g/mol.

Mass of 2.39 mol ammonia = 2.39 x 17 = 40.63 grams

In other words, 40.63 grams of [tex]NH_3[/tex] will result from the reaction.

More on stoichiometric problems can be found here: https://brainly.com/question/27287858

#SPJ1

Refer to the equation below of the reaction of Nitrogen with hydrogen. If 16.7 grams of Nitrogen react, then:

N2(g) + 3H2(g) → 2NH3(g)

a. How many moles of NH3 are produced?

7.15 x 10²⁴  particles of NO₂  equals 11.87moles.

A mole is defined as the amount of substance that contains 6.022 x 10²³ elementary particles (atoms, ions, molecules). 6.022 x 10²³ is known as Avogadro's number.

6.022 x 10²³ particles = 1 mole

According to the question,

The number of NO₂ particles = 7.15 x 10²⁴.

Using the equation, 6.022 x 10²³ particles = 1 mole

6.022 x 10²³ particles = 1 mole

1 particle of NO₂ = 1/6.022 x 10²³ mole

7.15 x 10²⁴ particles of NO₂ =  (1/6.022 x 10²³) x 7.15 x 10²⁴

7.15 x 10²⁴ particles of NO₂ = 11.87 moles

Thus, 7.15 x 10²⁴  particles of NO₂= 11.87 moles.

To learn more about the mole concept, refer.

https://brainly.com/question/12805690

The nitrogen hybridizations in NF3 and NH3 are, respectively, sp3 and sp3.

To learn more about hybridization visit:

https://brainly.com/question/22765530

#SPJ4

Maltose is a disaccharide composed of two glucose molecules linked by a glycosidic bond. it contain two functional groups: a hydroxyl group (-OH) and an aldehyde group (-CHO).

The hydroxyl group is a functional group that consists of an oxygen atom bonded to a hydrogen atom. They are found in the glucose molecules and are responsible for the solubility of maltose in water. The aldehyde group is a functional group that consists of a carbonyl group (-C=O) with an hydroxyl group attached to it. It is found in the reducing end of the glucose molecules and is responsible for the reducing hydroxyl group properties of maltose.

Learn more about functional groups here:

https://brainly.com/question/493841

#SPJ4

The balanced chemical equation for the reaction between sulfuric acid and sodium chloride to produce hydrogen chloride gas and sodium sulfate is:

2H₂SO₄ + 2NaCl -> 2HCl + Na₂SO₄

The equation given above is:

Sulfuric acid + sodium chloride -> hydrogen chloride + sodium sulfate

Therefore, In this equation, sulfuric acid (H₂SO₄) is the acid and sodium chloride (NaCl) is the base. The acid donates protons (H+ ions) to the base, resulting in the production of hydrogen chloride gas (HCl) and a salt (Na₂SO₄).

The overall reaction is an example of an acid-base reaction, in which the acid and base react to produce a salt and a neutralization product (in this case, HCl).

Learn more about balanced chemical equation from

https://brainly.com/question/26694427

#SPJ1

See full question below

When sulfuric acid is added to solid sodium chloride and the mixture is heated, hydrogen chloride gas is generated, leaving a solid residue of sodium sulfate. Give the balanced chemical equation for this reaction.

The order of the reaction is First Order with respect to the hydroxide ion (OH-) can be determined by examining the slope of the line generated in the plot of ln(k) vs ln[OH-].

Since the line's slope in this instance is 1.01, the reaction in question is first-order with regard to OH-. The power to which the concentration order of a reactant is elevated in the rate equation is referred to as the order of a chemical reaction.

The rate equation, a mathematical statement that connects the rate of the reaction to the concentrations of the reactants, is often used to explain the rate of a reaction. By measuring the rate of a reaction at various reactant concentrations and fitting the results to a rate equation, the order of a reaction can be experimentally determined.

Learn more about the order of the reaction here:

brainly.com/question/8139015

#SPJ4

Answer: Convection

Explanation:

Convection is the transfer of heat from a surface by mean of a fluid  such as air.  Natural convection occurs as air is heated :  it expands , rises, and is replaced by cooler air.

0.0219 is the phenol mole fraction. And 4.37% of the bulk is made up of phenol. 0.486 m is the molality of phenol. The number of molecules in a given component can be determined by looking at its mole fraction.

The sum of all the moles in the given combination, in a mixture. It's a way to show how concentrated a solution is. As a result, the mole fraction of all the components combined is always one.

mass/molar mass for phenol moles is 20.8 / 94.11 = 0.221.

455/46 = 9.89 moles of ethanol Moles of phenol equal moles of ethanol when divided by two and multiplied by three.

The formula for calculating the mass percent of phenol is: mass of phenol / total mass) x 100 = 20.8 / 20.8 + 455) x 100 = 4.37%.

Molality is calculated as 0.221 / 0.455 / 0.486m, or moles divided by solvent mass.

Learn more about ethanol here

https://brainly.com/question/25002448

#SPJ4

Answer:

2

Explanation:

Resonance is a way of describing bonding in certain molecules or polyatomic ions by the combination of several contributing structures.

When we draw out the Lewis Structure for SO2 without expanding the octet, we see the two structures below.

Answer:Scientists used the model to make predictions. Sometimes the results of their experiments were a surprise and they did not fit with the existing model. Scientists changed the model so that it could explain the new evidence. The discovery of electrons. Atoms can be broken down into smaller parts.

Explanation:

F-   is the most likely ligand to form a high spin octahedral complex with cobalt(II) ion.

In coordination chemistry, a ligand is an ion or molecule that binds to a central metal atom to form a coordination complex. The bonding with the metal generally involves formal donation of one or more of the ligand's electron pairs, often through Lewis bases. F-   is the most likely ligand to form a high spin octahedral complex with cobalt(II) ion. It is so because it is weak field ligand. Weak field ligands are ones that produce small splitting between the d orbitals and form high spin complexes.

Learn more about Ligands

brainly.com/question/28304673

#SPJ4

There are 4 calories per gram of carbohydrate, 4 calories per gram of protein, 9 calories per gram of fat and 7 calories per gram of alcohol.

Calories are the amount of energy released when your body breaks down digests and absorbs food. The more calories a food has the more energy it can provide to your body. When you eat more calories than you need your body stores the extra calories as body fat.

Therefore when we eat and drink more calories than we use up our bodies store the excess as body fat. If this continues over time we may put on weight. As a guide an average man needs around 2,500kcal [10,500kJ]a day to maintain a healthy body weight.

Learn more about calories here: brainly.com/question/28589779

#SPJ1

Chemistry is involved in the production of perfume since most of the ingredients used in perfumes are organic compounds. This includes the synthesis of molecules like essential oils, aromatic compounds, and other molecular compounds used to create different fragrance profiles. Fragrance molecules typically contain long hydrocarbon chains which produce a pleasant aroma when the perfume is applied. They also contain functional groups like alcohols and esters which contribute to the volatile properties of the fragrances. Additionally, some of the perfume fixatives contain natural organic compounds such as musk and ambergris for longer-lasting fragrances.

The chemistry of perfumes the preparation of a perfume basically includes the following components: denatured ethanol [tex] \bold{C_2H_6O}[/tex], essence or fragrance, fixative, propylene glycol [tex] \bold{C_3H_8O_2}[/tex], and distilled water[tex] \bold{H_2O}[/tex]. The fragrance, for its part, can be synthetic or natural.

The following ions in order of decreasing atomic radius are:

1) [tex]Po^{2-} > Te^{2-} > Se^{2-} > S^{2-} > O^{2-}[/tex]

2) [tex]Mg^{2-} > Mg > Mg^{2+}[/tex]

3) [tex]Sb^{3-} > Te^{2-} > I^{-} > Cs^{+1} > Ba^{2+} > La^{3+}[/tex]

There are two primary trends in atomic radius. One atomic radius trend appears as you walk across the periodic table from left to right (doing so within a period), and the other trend appears as you move from the periodic table's top down (moving within a group).

In other words, as protons are added, the nucleus gains a higher positive charge, which in turn attracts the electrons more strongly and draws them in toward the nucleus of the atom. The radius of the atom decreases as the electrons are drawn inward toward the nucleus.

The atom gains one extra electron shell for every group down. The atomic radius grows when each additional shell is positioned farther from the atom's nucleus.

According to the question

for the first point all the atoms are in the period so the order will be,

[tex]Po^{2-} > Te^{2-} > Se^{2-} > S^{2-} > O^{2-}[/tex]

and in the second point Mg is losing electrons. more it lose the electrons, less will be the radius.

[tex]Mg^{2-} > Mg > Mg^{2+}[/tex]

and at last it undergoes both period and group trend.

[tex]Sb^{3-} > Te^{2-} > I^{-} > Cs^{+1} > Ba^{2+} > La^{3+}[/tex]

Learn more about atomic radius

brainly.com/question/13607061

#SPJ4

A chemical reaction's change in enthalpy is equal to the  ∆hf0 of products minus ∆hf0 of reactants.

Chemists can determine how much energy is consumed or created in a chemical process by measuring the change in enthalpy.

A reaction is exothermic, or one that generates heat in the environment, if the change in enthalpy is negative (i.e. 0).

The reaction is endothermic, meaning that it absorbs heat from the environment, if the change in enthalpy is positive (i.e. > 0).

Click here to learn more about enthalpy

https://brainly.com/question/29556033

#SPJ4

The complete question is

Using a table that lists standard heats of formation, you can calculate the change in enthalpy for a given chemical reaction. the change in enthalpy is equal to _____.

a)  ∆hf0 of reactants minus ∆hf0 of products

b) ∆hf0 of products plus ∆hf0 of reactants

c)  ∆hf0 of products divided by ∆hf0 of reactants

d)  ∆hf0 of products minus ∆hf0 of reactants

1s²2s²2p⁴ is the electron configuration of oxygen.

The placement of electrons around the nucleus of a specific atom or molecule is known as its electronic configuration. The smallest parts of an atom are protons, neutrons, and electrons.

A neutral atom has an equal number of protons and electrons. That number is the element's atomic number, according to the periodic table of elements. The electronic configuration of an atom reveals the number and distribution of its electrons.

Oxygen, the eighth element, has a total of eight electrons. In the oxygen electron arrangement, the first two electrons will be in the 1s orbital. Since 1s can only hold two electrons, the next two electrons for O are put in the 2s orbital. The final four electrons will go to the 2p orbital.

To know more about electronic configuration click here

https://brainly.com/question/29757010

#SPJ4

Given here is the resonance structure of the acetone c-h bond, (ch3)2c-o, which has a pka of 19.2.

Acetone is a liquid solvent that can disintegrate and break down other materials. Products like varnish remover, paint remover, and nail polish remover all include acetone. Some people produce plastics, lacquers, and textiles using acetone as well. Acetone is a ketone, whereas alcohols belong to a separate class known as alcohols. Alcohols can be created from ketones (reacting with hydrogen or another reducing agent). Ketones can isomerize to unsaturated alcohols under specific circumstances.

As a solvent, acetone can disintegrate or break down materials like paint and varnish. Because of this, it is a component of paint, varnish, and nail polish removers. Ammonia and acetone are the two substances that are most frequently used around the world to remove paint off metal surfaces.

To know more about Acetone visit:

https://brainly.com/question/13334667

#SPJ1

A chemist wants to extract copper metal from copper chloride solution. the chemist places 0.25 grams of aluminum foil in a solution of 0.40 grams of copper (ii) chloride. a single replacement reaction takes place. About 0.20 grams of copper (II) is formed, and some aluminum is left in the reaction mixture. The correct answer is B.

Copper and aluminum make up the following balanced chemical equation:

3Al +3CuCl₂ ⇒ 3Cu + 3AlCl₂

Mass Al= 0.25 grams

Mass molar Al = 26.98 g

first we should calculate the moles of Al

moles Al = mass/ mass molar

moles Al = 0.25 grams/ 26.98 g

moles Al =  0.00926 mol

CuCl₂ has a mass of 0.40 grams.

CuCl₂has a molar mass of 134.5 grams.

Moles CuCl₂ = 0.00297 moles

By using the unitary technique, 3 moles of CuCl₂ will react with 2 moles of Al, resulting in a reaction between 0.00297 moles of CuCl₂ and 0.00198 moles of Al.

Since there is more Al present than is necessary, CuCl₂ would be the limiting reagent.

Cu = 0.00297 moles in quantity.

This Cu's mass is 0.1885 g of Cu.

As a result, the reaction mixture contains some aluminum and about 0.20 grams of copper (II).

Learn more about Reaction

brainly.com/question/13677872

#SPJ4

person above is right

explanation; because person above is right

Answer: a solid is dissolved in a solid

Explanation:

The newest bonanza for recycling scarce and toxic metals is to recover them from car batteries.

Recycled aluminum items cost more than 10 times more than metal metal is shiny. Thanks to their shiny appearance, they can be used in jewelry and decorations. Gold and silver are especially used in jewelry. In the past, mirrors were made of shiny metals, such as silver.

Silver is a very good reflector. It reflects around 90% of the light that hits it. All modern mirrors have a thin metal coating. Metals are usually more difficult to cut. Their hardness varies from metal to metal. Some metals, such as sodium, potassium and magnesium, are easy to cut.

In danger, metals can be beaten into thinner plates. This function is called editable. Most metals are malleable. Gold and silver metals are the most ductile metals. They can be forged into very thin sheets. Thin aluminum foils are widely used for safe packaging of medicines, chocolates and food.

To know more about metal here

https://brainly.com/question/17979429

#SPJ4

Yes ,molecular interactions (like h-bonds, ionic bonds, and hydrophobic interactions) occur between substrates and the atoms of the enzyme's active site

To create the enzyme-substrate complex, substrates attach to the enzyme's active site via hydrogen bonds, hydrophobic contacts, ionic bonds, brief covalent connections (Van der Waals' interactions), or a mixture of all of these. The study of biology, chemistry, and biochemistry all depend on the phenomenon of hydrophobicity. It is described as the interaction of low solubility nonpolar molecules or groups with water. Numerous water-related processes, such as complexation, surfactant aggregation, and coagulation, are impacted by hydrophobic interactions.These interactions are essential for the development and maintenance of proteins or biological membranes. The effect of ionic strength, solute size, and shape on hydrophobic interactions between pairs of nonpolar particles was examined in the current work.

Learn more about hydrophobic interactions

brainly.com/question/14214784

#SPJ4

The success of Bohr's model that demanded the scientific community's attention was its ability to: explain the gold foil experiment.

Gold foil experiment: Rutherford began a series of ground-breaking experiments in 1911 with the assistance of his associates Hans Geiger and Ernest Marsden, which would fundamentally alter the conventional concept of the atom. They sprayed incredibly thin sheets of gold foil with alpha particles that move quickly. Positively charged particles having a mass about equal to that of an atom of hydrogen, alpha particles are a type of naturally radioactive particle. A relatively small fraction of alpha particles were deflected after being bombarded with gold foil. In the nuclear model of the atom, the positively charged interior is compact and enclosed by an electron cloud.

Learn more about Bohr's Model here:

https://brainly.com/question/3964366

#SPJ4

The IR spectrum of Adipic Acid will show the following absorption bands for the specified bonds:

The IR spectra of a compound can be used to identify the functional groups present in the compound by looking for specific absorption bands that correspond to the vibrations of the bonds in those functional groups.

To confirm the presence of these functional groups, we can compare the IR spectrum of the compound with known spectra of compounds that contain these functional groups. Additionally, the chemical shifts and relative intensities of the peaks can also be used to confirm the presence of these functional groups.

Learn more about IR spectrum of Adipic Acid here:

https://brainly.com/question/29601963

#SPJ4

Sulfur tetrafluoride - SF4 has the correct name-formula combination.

To learn more about the correct name-formula combination refer to:

https://brainly.com/question/29031478

#SPJ4

The principles governing 13 C NMR chemical shifts are the same as those governing 1 H, even though the normal range of chemical shifts is much wider (by a factor of about 20).

The carbons in tetramethylsilane (TMS), whose chemical shift is thought to be 0.0 ppm, serve as the chemical shift reference standard for 13 C. Typical 13 C-NMR chemical shiftsFormula for 1-Penten-3-one: C5H8O 84.1164 molecular weightA pentene molecule has five carbon atoms since the prefix pent- implies "five." The pentene molecule is an alkene, as indicated by the prefix -ene. A substance known as an alkene is an organic compound that has at least one C=C double bond. This indicates that two of the carbons in pentene are doubly bonded.

learn more about carbon Refer:brainly.com/question/13719781

#SPJ4

The Ka of the amino acid glycine is  2.49 * [tex]10^{-10}[/tex] . This is calculated using the  Henderson-Hasselbalch equation.

initial      1             0            0

final       1-x            x           x

x = 0.75

1-x = 0.25

A buffer is a solution you add to another solution in order to balance its pH, its relative acidity or its alkalinity.  To determine a buffer's pH--or extrapolate from its pH the concentration of any one of its components--you can make a series of calculations based on the Henderson-Hasselbalch equation, which is also known as the "buffer equation." We can use the buffer equation to determine the pH of an acidic buffer solution, given certain acid-base concentrations.  The Henderson-Hasselbalch equation is as follows,

pH = pKa + log ( [A-] / [HA] )

Ka = 2.49 * [tex]10^{-10}[/tex]

To learn more about  Henderson-Hasselbalch equation please visit:

https://brainly.com/question/13423434

#SPJ4

Answer:sample B is non metal

Explanation: