The conjugate base of CH3NH3+ is A) CH3NH2+ B) CH3NH2-C) CH3NH+ D) CH3NH2

All of the following are involved in eukaryotic transcription EXCEPT a rho factor. The correct answer is 2.

Eukaryotic transcription is the process by which genetic information in DNA is transcribed into RNA. This process is carried out by a large complex of proteins and enzymes, including general transcription factors, transcription activators, and a transcription initiation complex.

These proteins and enzymes work together to unwind the DNA double helix, recruit the RNA polymerase enzyme to the promoter region of the gene, and begin the process of synthesizing RNA. The rho factor is not typically involved in this process, as it is specific to prokaryotic cells and is involved in the termination of transcription.

To learn more about transcription visit: https://brainly.com/question/1048150

#SPJ4

Option (A) is correct. CaSO4 is most soluble in water rather than 1.0M CaCl2(aq.). This is according to the concept of Common ion effect and solubility.

The solubility product of CaSO4 Ksp = 3x10-5

CaSO4 is sparingly soluble in water and this equilibrium is setup between the solid and its ions in solution.

if we add 0.5M K2SO4 solution, the sulfate ion (SO4-2) is the common ion to both of them. this is the origin of the term "common ion effect". according to Lech atelier's principle , the position of equilibrium would shift in order to count what have just done.  in this case, it would tend to remove sulfate ion (SO4-2) by making extra solid calcium sulfate. hence it will less soluble and the concentration of calcium ions in the solution  will decrease. 

similarly , if we add 1.0M CaCl2, it will less soluble and the concentration of sulfate ions (SO4-2)  in the solution will decrease.

To learn more about Solubility please visit:

https://brainly.com/question/23946616

#SPJ4

CH3CH2OH has more dispersion forces than CH3OH, so it has the highest boiling point.

The primary alcohol and the simplest aliphatic alcohol is methanol, which consists of a methyl and an alcohol group. It serves as an amphiprotic solvent, a fuel, a metabolite for humans, mice, Escherichia coli, and other organisms, as well as a metabolite for Mycoplasma genitalium.

It is a primary alcohol, a volatile organic chemical, a one-carbon compound, and an alkyl alcohol. The acid is a methoxide's conjugate. The strongest intermolecular hydrogen bonds are formed by water, giving it the highest boiling point.

Although ethanol and methanol also create powerful intermolecular hydrogen bonds, water has twice as many intermolecular hydrogen bonds per molecule as ethanol and methanol do. This is so because, whereas in water, 2 H atoms are bonded to an electronegative oxygen atom.

To learn more about methanol CH3OH refer to:

https://brainly.com/question/13483562

#SPJ4

Answer:

Hydrogen can only have 1 proton, if it has a different number of protons then its not hydrogen, elements with the same number of protons but different numbers of neutrons are called isotopes

The mass of oxygen that reacted would be 26.32 grams.

The balanced equation of the reaction would be as follows:

[tex]SO_2(g) + 2O_2(g) --- > 2SO_3(g)[/tex]

Thus, the mole ratio of the [tex]SO_3[/tex] that is produced and the [tex]O_2[/tex] that reacts is 1:1.

Recall that, mole is the ratio of mass and molar mass. That is:

Mole = mass/molar mass

Mole of 65.8 grams of  [tex]SO_3[/tex] = 65.8/80 = 0.8225 mol

From the mole ratio, the equivalent mol of  [tex]O_2[/tex] that reacts would also be 0.8225 mol.

Mass of 0.8225 mol [tex]O_2[/tex] = 0.8225 x 32

                                       = 26.32 grams

In other words, the mass of oxygen that reacted to produce 65.8 grams of [tex]SO_3[/tex] according to the reaction is 26.32 grams.

More on stoichiometric problems can be found here: https://brainly.com/question/28297916

#SPJ1

The concentration of ammonia used is equal to 2.07 mol.dm⁻³.

A neutralization reaction can be explained as a reaction in which an acid and base react to form respective salt and water. When a strong acid will react with a strong base and the respective salt will be neither acidic nor basic.

When H₃PO₄ reacts with ammonia, the resulting salt is ammonium phosphate.

H₃PO₄    +  3 NH₃   →  (NH₄)₃PO₄

Given, the concentration of phosphoric acid = 1.25 mol dm⁻³

The volume of the phosphoric acid = 25 cm³ = 25 × 10⁻³ dm³

The number of moles of phosphoric acid, n = M × V = 1.25 × 25 × 10⁻³ = 0.0313 mol

The volume of the ammonia = 45.3 cm³ = 45.3 × 10⁻³ dm³

The number of moles of ammonia, n = 0.0313×3 = 0.0938 mol

The concentration of ammonia = 0.0938/45.3  × 10⁻³  = 2.07 mol dm⁻³

Learn more about neutralization reaction, here:

brainly.com/question/20038776

#SPJ1

The solubility-product constant for this salt at [tex]25^{0}[/tex] C is 6.4 × [tex]10^{-9}[/tex]

The solubility product, or Ks, of an ionic compound is the quantity of ions in a saturated solution that are in equilibrium with the solid.

The term "solubility product" refers to the ability of a substance to dissolve as a solute in a solvent to form a solution. The solubility of the ionic compounds that break down in water to form cations and anions varies significantly.

Moles of dissolved [tex]PbI_{2}[/tex] = 0.54 g /461.05 g/mol =0.00117

concentration of dissolved [tex]PbI_{2}[/tex] = 0.00117 mol / 1.0 L = 0.00117 M

Concentration [tex]Pb^{2+}[/tex] = 0.00117 M

Concentration [tex]I^{-}[/tex]  = 2 x 0.00117 =0.00234 M

[tex]K_{sp}[/tex] = 0.00117[tex](0.00234)^{2}[/tex]  = 6.4 x [tex]10^{-9}[/tex].

Learn more about solubility-product constant:

brainly.com/question/1419865

#SPJ4

The entropy of vaporization of benzene is 86.7 J/mol.K. where the normal boiling point of benzene is 80.1°C, and the heat of vaporization is AHvap 30.7 kJ/mol.

T(benzene - C₆H₆) = 80.1 °C = 80.1 + 273.15 = 353.25 K.

ΔHvap(C₆H₆) = 30.7 kJ/mol.

ΔSvap(C₆H₆) = ?

ΔS(C₆H₆) = ΔH ÷ T

ΔS(C₆H₆) = 30.7 kJ/mol ÷ 353.25 K

ΔS(C₆H₆) = 0.087 kJ/mol·K = 86.7 J/mol·K.

ΔS - entropy of vaporization.

Benzene is a colorless or light-yellow liquid chemical. Primarily it is used as a solvent in the chemical and pharmaceutical industries, as a starting material and an intermediate in the synthesis of numerous chemicals, and in gasoline. Benzene is produced by both natural and man-made processes.

Learn more about Benzene:

brainly.com/question/14525517

#SPJ4

Q > K products will form more reactants as the system reaches equilibrium. Is true.

The ratio of products to reactants in a process at any particular moment is measured by the reaction quotient Q.By dividing the concentrations of the reactants raised to the power of their stoichiometric coefficients by the concentrations of the products raised to the power of their stoichiometric coefficients, the reaction quotient (Q) is computed.

Q = [Pt(s)][Br₂(1)] / [Pt²+(aq)][Br¯(aq)]²

And if initial concentrations of both Pt²+(aq) and Br-(aq)

is 2.0× 10-² M,

Therefore Q = (1)(1)/(2.0×10-²)³

Since this reaction's equilibrium constant (K) is 5.3 x 103, Q > K suggests that as the system achieves equilibrium, more reactants will be formed from the products.

To learn more about reaction quotient visit,

https://brainly.com/question/24202150

#SPJ4

The relative atomic mass of an element R with two isotopes 63R and 65R is 63.64.

Relative atomic mass is the ratio of the average mass per atom of the naturally occurring form of an element to 1/12 of the mass of a carbon-12 atom.

The relative atomic mass (RAM) of an element with two isotopes can be calculated by multiplying the mass of each isotope by its respective percentage abundance as follows:

RAM = (63 × 0.68) + (65 × 0.32)

RAM = 42.84 + 20.8

RAM = 63.64

Therefore, 63.64 is the relative atomic mass of the element R.

Learn more about relative atomic mass at: https://brainly.com/question/25698972

#SPJ1

It can be concluded that the two samples with sulfur, oxygen, and sodium are the same compounds.

Out of the four given choices, option 1 is the most appropriate one. This can be justified by the fact that the samples in the question have the same chemical and physical properties, which are not considered for a mixture. It can neither be a solution because a solution can not exist in solid form but liquid. As per the question, the sample contains three elements, named sulfur, oxygen and sodium, so it is a compound.

A chemical compound is a substance that contains atoms from multiple chemical elements held together by chemical bonds. It is made up of numerous identical molecules. Therefore, a molecule made up of only one type of atom is not a compound.

To know more about compounds, refer to the following link:

https://brainly.com/question/26487468

#SPJ4

Complete question is:

Two solid samples each contain sulfur, oxygen, and sodium, only. These samples have the same color, melting point, density, and reaction with an aqueous barium chloride solution. It can be concluded that the two samples are the same.

(1) compound (3) mixture

(2) element (4) solution

Explanation:

reacting to something that has been said

The compound that would be expected to be a liquid at room temperature is CsF.

The correct option is C.

A liquid is a compound that is one of the three states in which matter exists.

A liquid is a nearly incompressible fluid with an (almost) constant volume regardless of the pressure that adapts to the shape of its container.

Liquid compounds have intermolecular forces that are lesser in strength than that solids but are stronger than the intermolecular forces that exist in gases.

Examples of liquid compounds are water, CsF, etc.

Learn more about liquids at: https://brainly.com/question/752663

#SPJ1

Mole of  [tex]SiH_{4}[/tex] is0.0077 and  The mass of [tex]SiH_{4}[/tex] is required to prepare is 0.2464g

The mole, abbreviated as mol, is the International System of Units' unit of material amount. How many elementary entities of a particular substance are contained in an object or sample is determined by the quantity of that material. The Avogadro number, or approximately how many nucleons (protons or neutrons) are in one gram of common matter, is the number of elementary particles in one mole. The most prevalent carbon isotope, carbon-12, weighs 12 grams, therefore the traditional definition of a mole was the quantity of elementary particles equal to that weight.

For the 0.2173g of Si , The moles of Si=[tex]\frac{Given\: mass}{Molar \:mass}[/tex]

moles of Si=[tex]\frac{0.2173}{28}[/tex]

moles of Si=0.0077

then,, According to Stoichiometry

moles of Si=moles of [tex]SiH_{4}[/tex]=0.0077

molar mass of [tex]SiH_{4}[/tex]=32g

mass of [tex]SiH_{4}[/tex]=moles of [tex]SiH_{4}[/tex] x 32g

mass of [tex]SiH_{4}[/tex]=32 x 0.0077=0.2464g

Learn more about mole

brainly.com/question/26416088

#SPJ4

The process of scientific inquiry is based on evidence and experimentation, and theories are continually tested and evaluated based on new data and observations.

A theory proposed by an astronomer would need to be thoroughly evaluated and supported by evidence from various sources, including observations, experiments, and calculations. One important aspect is the ability of the theory to make testable predictions, and whether it can be evaluated by independent researchers and other scientists.

In summary, the scientific method is a self-correcting process that relies on objective evidence and experimentation to evaluate theories and make progress in our understanding of the universe. A proposed theory is only considered accepted if it has been repeatedly and independently confirmed through experiments, research and other scientific endeavors, that's why the most important thing for any theory is the evidence and scientific validation to support it.

Learn more about Scientific method here:

https://brainly.com/question/7508826

#SPJ4

Scientific investigation is founded on data and experiments, and ideas are regularly put to the test and astronomer's in light of fresh information and observations.

An astronomer's theory would have to be carefully examined and backed by data from numerous sources, such as observations, experiments, and computations. The theory's capacity for testable predictions and its suitability for evaluation by other scientists and independent researchers are both crucial observations. In conclusion, the scientific method is a self-correcting procedure that depends on empirical data and experiments to assess theories and advance our comprehension of the cosmos. Only until it has been independently and repeatedly verified by experiments, study, and other scientific endeavours is a given theory deemed accepted.

To learn more about astronomer, click here.

https://brainly.com/question/14853303

#SPJ4

There are three chirality centers in the structure: The carbon atom at the center of the molecule, the nitrogen atom at the top of the molecule, the oxygen atom at the bottom of the molecule.

What is structure?
Structure is the arrangement of components within a system. It is used to define the layout, connections and interactions of those components, in order to achieve a certain purpose. Structures can be physical, such as the structure of a bridge, or abstract, such as the structure of a story. Structures can be simple or complex and can involve multiple levels of inter-related components. For example, a business may have a hierarchical organizational structure with a CEO at the top, followed by a board of directors and then various departments and teams. Structure is an important part of any system because it helps to create order and organization, and provides clarity and understanding.

To learn more about structure
https://brainly.com/question/28353159

#SPJ4

1s² 2s² 2p⁶ 3s² 3p⁶ 4s¹ 3d⁵ is the electronic configuration of Cr. the correct answer is D.

There are 24 electrons in all, according to the electron arrangement. A neutral atom will contain 24 protons if it has 24 electrons. The element is determined by its proton count. Chromium, symbol Cr, is the 24th element.

Since Cr contains 24 protons and the +2 charge would result in the nucleus having 26 protons, Cr²⁺ is invalid.  Cu is made up of 29 protons. The copper would be Cu⁵⁺ as there are only 24 electrons. Cu²⁺ was rejected for the same reason.

Therefore, 1s² 2s² 2p⁶ 3s² 3p⁶ 4s¹ 3d⁵ is the electronic configuration of Cr.

Learn more about electron configuration at https://brainly.com/question/12706589

#SPJ4

Answer:

Calcium, potassium, aluminum, chlorine, bromine

Explanation:

I do not know all of them, but here are some.

Answer:

The Arrhenius theory defines an acid as a substance that increases the concentration of hydrogen ions (H+) in an aqueous solution and a base as a substance that increases the concentration of hydroxide ions (OH-) in an aqueous solution.

To determine if Ba(OH)2 is an acid or a base, we can write an Arrhenius reaction:

If Ba(OH)2 is a base, it will dissociate in water to form Ba2+ ions and OH- ions, according to the equation:

Ba(OH)2(s) → Ba2+(aq) + 2OH-(aq)

If Ba(OH)2 is an acid, it will react with water to form Ba2+ and H3O+ ions, according to the equation:

Ba(OH)2(s) + H2O(l) -> Ba2+(aq) + 2H2O(l)

As we can see, in the first reaction Ba(OH)2 is a base, it will dissociate in water to form Ba2+ ions and OH- ions. Ba(OH)2 is a strong base and it can neutralize an acid, forming water and a salt.

The Lewis structure for HCCH (ethyne) by placing atoms on the grid and connecting them with bonds is-

For more details on Ethyne, visit:

https://brainly.com/question/4225077

lewis structure of ethyne is

Ethyne, also known as acetylene, is a hydrocarbon with the chemical formula C2H2. It is a colorless and highly flammable gas that has a distinct garlic-like smell. Ethyne is a member of the alkyne family, which is characterized by its triple bond between the two carbon atoms. This triple bond gives ethyne its unique chemical properties, such as high reactivity and stability.

Ethyne is used in a variety of industrial processes, such as welding and cutting, where the intense heat generated by the combustion of ethyne is used to melt metal. It is also used as a raw material in the production of chemicals such as acrylonitrile and vinyl acetylene. However, ethyne should be handled with caution as it is extremely flammable and can cause serious injury if not handled properly.

To know more about ethyne

https://brainly.com/question/9929793

#SPJ4

For the IR Spectra of 4-Aminophenol, the functional groups present are amine (N-H) and hydroxyl (O-H). The N-H stretch is typically around 3300-3500 cm⁻¹, while the O-H stretch is around 3200-3600 cm⁻¹.

For Acetaminophen, the functional groups present are amide (C=O) and hydroxyl (O-H). The C=O stretch is typically around 1700-1730 cm⁻¹ and the O-H stretch is around 3400-3500 cm⁻¹.

This condition are approximate wavenumber ranges, and the exact peak locations may vary depending on the sample, instrumentation, and measurement conditions.

Factors like the sample preparation, temperature, humidity, pressure and the instrument used to measure the spectra can affect the peak positions and intensity. This is why it is important to compare spectra to known compounds or standards to confirm the identification of functional groups. Additionally, the chemical environment of a functional group can also influence its vibrational frequency, and so the exact peak location may vary depending on the specific compound and functional group.

Learn more about IR spectra here:

https://brainly.com/question/30227817

#SPJ4

the answer to your mathematical highschool question is 46.3942

The molar mass of the acid is 65 g/mol if 0.75 g of a monoprotic weak acid used 22.50 mL of 0.510 M NaOH to titrate it.

The quantity of a substance in a specific volume of solution is known as its molarity (M) and this is written as M = n÷V where M is molarity, V is the volume of solution in liters, and n is the number of moles.

First, let's write the balanced equation is,

[tex]\mathrm{HA + NaOH \rightarrow NaA + H_2O}[/tex]

Now, we can calculate the number of moles of HA from the above formula,  

[tex]\begin{aligned}n&=\text{molarity}\times\text{volume}\\&=0.51\times2.25\times10^{-2}\\&=\mathrm{1.147\times10^{-2}\;mol}\end{aligned}[/tex]

By balanced chemical equation, the number of moles of NaOH is calculated as follows,

[tex]\begin{aligned}\text{moles of NaOH reacted }&= \frac{1}{1} \times\text{moles of HA}\\&=\frac{1}{1}\times1.147\times10^{-2}\\&=\mathrm{1.147\times10^{-2}\;mol}\end{aligned}[/tex]

Then, the molar mass of the acid is,

[tex]\begin{aligned}\text{number of moles (n)}&=\mathrm{\frac{mass}{molar\;mass}}\\\text{molar mass}&=\mathrm{\frac{mass}{n}}\\&=\mathrm{\frac{0.75\;g}{1.147\times10^{-2}\;mol}}\\&=\mathrm{0.6539\times10^{-2}\;g/mol}\\&=\mathrm{65.39g/mol}\\&\approx\mathrm{65\;g/mol}\end{aligned}[/tex]

The required answer is 65 g/mol.

To know more about molar mass:

https://brainly.com/question/7585012

#SPJ4

The value of pH is important during digestion because d. different enzymes work best at different pH values.

A protein enzyme molecule is a biomolecule used during digestion to carry out the chemical reaction in order to break down foods into smaller particles, which are well known to lower the activation energy requires to produce such reactions.

Protein enzyme molecules are well known to act under certain conditions and the maximum work rate of an enzyme depends on the environment which involves the pH value associated with the presence of hydrogen protons that are able to interact with the substrates of different digestive enzymes.

Therefore, with this data, we can see that protein enzyme molecules are able to lower the activation energy of a given chemical reaction and they work under specific environmental conditions including the pH of the media.

Learn more about enzyme molecules here:

https://brainly.com/question/13229323

#SPJ1

He> F2 > Ar > SF6.

A square root of a gas's molecular weight has an inverse relationship with the rate for effusion of that gas.A gas will effuse faster when it is lighter and more slowly when it is heavier.

In comparison to oxygen, nitrogen has a smaller molar mass.As a result, the rate of nitrogen effusion is greater than that of oxygen effusion.

To know more about order visit:

https://brainly.com/question/13467963

SPJ4

Photoelectric sensors project and detect an infrared beam across an area.

photoelectric phenomenon in which  charged particles are emitted from or within a material upon absorption of electromagnetic radiation. This effect is often defined as the ejection of electrons from a metal plate when light hits it. In a broader definition,  radiant energy can be infrared, visible, or ultraviolet, X-rays, or gamma rays. Materials can be solids, liquids, or gases. Emitted particles can be both ions (charged atoms or molecules) and electrons.

This phenomenon was fundamental to the development of modern physics as it posed an enigmatic question about the properties of light (the behavior of particles or waves) that was finally solved by Albert Einstein  in 1905.

To know more about photoelectric:

https://brainly.com/question/26465043

#SPJ4

In the polysaccharide cellulose, large numbers of monosaccharides are linked together through glycosidic linkages.

TPolysaccharides, which are the most ubiquitous carbohydrates in nature, serve a number of functions, including energy storage and incorporation into plant cell walls.

Tens to thousands of monosaccharides are joined together via glycosidic linkages to form large polymers known as polysaccharides. The three most frequent polysaccharides are starch, glycogen, and cellulose. They are collectively referred to as homopolymers because, after complete hydrolysis, each of these three exclusively yields one type of monosaccharide (glucose).

Heteropolymers may also comprise sugar acids, amino sugars, or non-carbohydrate substances in addition to monosaccharides. Polysaccharides, a class of non-reducing carbohydrates, are not sweet and do not change. 

To learn more about polysaccharide of refer to:

https://brainly.com/question/29352715

#SPJ4