The radius of our Sun is 6.96 × 108 m, and its total power output is 3.85 × 1026 W. (a) Assuming the Sun’s surface emits as a black body, calculate its surface temperature. (b) Using the result of part (a), find λmax for the Sun

Answer hello

Explanation: hello

Answer:

The two rear lights are connected in series so each light glows at half the voltage of the battery (if the resistance of filament of each bulb is same). Hence they glow faintly. They must be connected in parallel to glow properly as shown below in attachment

see attachment

Explanation:

Respiration and photosynthesis are biological reactions in the environment each other. Both produce energy but in two different forms.

During photosynthesis, Oxygen is released, and Carbon dioxide is consumed, but Carbon dioxide is liberated, and Oxygen is consumed during respiration.

Photosynthesis converts radiant or light energy into chemical or bond energy. Respiration delivers chemical or potential energy for several other functions in the body. Photosynthesis contains two stages light reaction and dark reaction. Respiration consists of two stages, they are inhalation and exhalation.

So we can conclude that The raw materials of photosynthesis are Carbon dioxide and water, but the raw materials of respiration are glucose and Oxygen.

Learn more about photosynthesis here: https://brainly.com/question/19160081

#SPJ1

Changing an object's speed without altering its direction of travel.

To alter an object's velocity, you require a net force. To maintain steady motion, no force is necessary. Anytime there is a net force acting on an object, that object must accelerate. The vector sum of all forces exerted on an object represents its net force.

An item that is originally at rest and has no net forces operating on it will continue to be at rest. If it is travelling, it will keep going in a straight line at a consistent speed. Pushes or pulls on an object are examples of forces.

To know more about net force visit:-

https://brainly.com/question/13410291

#SPJ4

The length of the wrench needed to turn the nut is 0.7 m.

Length is the distance between two points. The s.i unit of length is meter (m)

To calculate the length of the wrench needed to turn the nut, we use the formula below.

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Hence, the length of the wrench is 0.7 m.

Learn more about length here: https://brainly.com/question/20691242

#SPJ1

The current in the circuit 10 μ after the switch is moved from a to b is 18.084 A

A circuit is an arrangement of electronic parts, such as transistors, resistors, and capacitors, connected by conductive lines to form a closed circuit. The parts are put together in a way that permits an electrical current to pass through them, which enables electricity to be used to power machinery and other objects

The curent of the circuit can be calculate as follows:

B = ( N x μ0 )/ d

d refers diameter of solenoid = 2.0 cm = 0.02 m

N refers number of turns of wire = 300

μ0 refers permeability of free space = 12.56 x 10⁻⁷ H/m

B is the current

Then the flow of the current is calculated as,

B = ( N x μ0 )/ d

B = [4π x 10⁻⁷ x 300] / 2 x 10⁻²

B = 18.084 A

Learn more about inductor at https://brainly.com/question/15893850

#SPJ4

A star's parallax angle is less than a star's counterpart if star an is closer to us than star b. When an object is seen from two separate lines of sight, there is a distortion or change inside the perceived position object.

Inclination between those two lines is quantified as an parallax angle or semi-angle. A body can change its state of rest or motion when an external force acts on it. It is directed and has a magnitude. Force is applied at a location known as the application, and the direction in which it is applied is referred to as the force's direction. An influence that can alter an object's motion is referred to as a force in physics.

Learn more about force here

https://brainly.com/question/13191643

#SPJ4

Compared to type K and M stars, type O and B stars are younger and hotter. Large gas balls make up stars. Spectral types are assigned to stars. The stars' spectral order is OBAFGKM.

The hottest stars are O stars, which have temperatures ranging from 20,000 K to more than 100,000 K. Few absorption lines, often caused by helium, are present in these stars. The lifespan of these stars is a few million years.

Temperatures in B stars range from 10,000 to 20,000 K. B stars include Rigel in Orion and Spica in Virgo. They have a distinct blue hue.

A stars have strong absorption lines of Hydrogen. Examples are Vega, Altair, and Sirius. Temperatures are about 8000-10,000K. They appear white.

The Sun is just marginally hotter than F stars. Metal absorption lines are visible (to an astronomer, anything that is neither Hydrogen nor Helium is a metal). An F star is Procyon.

Temperatures in G stars range from 5000 to 6000K. They seem to be yellow. G stars include Alpha Centauri, Capella, and our own Sun.

Orange appears on K stars. 3000-5000 K is the temperature range. K stars include Arcturus.

The coolest stars are M stars. They are so cold (between 2000 and 3000 K) that molecules may be seen, such as those of water, carbon monoxide, vanadium oxide (used in sunscreen), and titanium oxide (the primary ingredient in white paint). Betelgeuse and Antares are two examples of these clearly red stars.

To know more about planets click here

https://brainly.com/question/14581221

#SPJ4

The total distance the car moved in 2 minutes is 2400 meters.

To calculate the total distance travelled by the car in 2 minutes, we need to first convert the time from minutes to seconds. There are 60 seconds in one minute, so 2 minutes is equal to,

2 * 60 = 120 seconds.

Next, we can use the formula for distance travelled:

d = r * t

Where d is the distance travelled, r is the rate (speed) of travel, and t is the time.

Plugging in the values we have, we get:

d = 20 m/s * 120 s = 2400 m

Therefore, the total distance travelled by the car in 2.0 minutes is 2400 meters.

Find similar problems here: https://brainly.com/question/10989759

#SPJ4

According to the given information A moving object has all of the above.

Speed is a scalar quantity that represents the magnitude of the velocity of an object, and it is measured in units such as meters per second (m/s).

Momentum is a vector quantity that represents the product of an object's mass and velocity, and it is measured in units such as kilogram-meters per second (kg·m/s).

Energy is a scalar quantity that represents the ability of an object to do work, and it is measured in units such as Joules (J).

Velocity is a vector quantity that represents both the magnitude and direction of an object's motion, and it is measured in units such as meters per second (m/s).

A moving object has all of the above properties.

It's important to note that all of these properties are related and they can be converted to each other, but they are not the same thing.

To know more about Momentum visit:

https://brainly.com/question/24030570

#SPJ4

Answer:

5HZ

Explanation:

The frequency of a wave:

It is the number of wave crests  that pass a fixed point in one second. To find the frequency of the wave you observed, we divide velocity by wavelength as below.

frequency = velocity / wavelength

where velocity is the speed of the wave and wavelength is the distance between consecutive wave .

Since the wavelength of the wave is 2m and the velocity of the wave is 10 m/s, we can calculate the frequency of the wave as:

frequency = 10m/s / 2m = 5 Hz

The magnitude of the weight force applied to the raindrop is 8.026 x 1010⁻⁶ N.

Rain is a liquid form of precipitation on Earth. It is part of the hydrologic cycle which begins when water evaporates and forms clouds in the atmosphere. A drop of rainwater that falls from a cloud to the surface of the earth occurs due to the force of gravity.

The drop is a sphere of diameter 2.5 mm

Radius = 1.25 mm = 0,00125 m

Volume = 4/3πr³

Volume = 4/3π (0,00125)³

Volume = 8.18 x 10⁻⁹ m³

Once we know the volume of rainwater, we can find its mass:

Mass = density x volume

Mass = 1000 x 8.18 x 10⁻⁹ m³

Mass =8.18 x 10⁻⁶ kg

Now, the weight force:

Weight force = mass x acceleration due to gravity

Weight force =  8.18 x 10⁻⁶ x 9.8

Weight force =  8.026 x 1010⁻⁶ N

So, the weight force of, the raindrops is 8.026 x 1010⁻⁶ N.

Complete the questions:

Raindrops acquire an electric charge as they fall. Suppose a 2.50-mm-diameter drop has a charge of +15.0 pC; these are both typical values: What is the magnitude of the weight force applied to the raindrop? The density of water: 1000 kg/m?

Learn more about the force of raindrop at https://brainly.com/question/13993285

#SPJ4

The magnitude of the boat's resultant velocity with respect to the starting point is 6 m/sec.

Given that in the question speed of motorboat is 5 m/sec in still water in the east direction and river is flowing in south direction with speed 3.3 m/sec. Direction of river flow is perpendicular to direction of motorboat.

The velocity of an object in relation to another observer is known as its relative velocity. It is the pace at which an object's relative location changes in relation to another object over time.

Net velocity of boat with respect to the starting point,

v = √5^2 + √3.3^2

v = 6 m/sec

Hence, the magnitude of the boat's resultant velocity with respect to the starting point is 6 m/sec.

Learn more about Velocity here:

https://brainly.com/question/80295

#SPJ4

Calculating the Amount of Expansion Work Associated with a Volume Change at Constant Pressure.

Using the equation: ΔV = V(initial) - V(final), we can find ΔV, the change in volume in cubic meters, m³.

Note: Converting the volumes to cubic meters could be necessary.

P, the restricting pressure, should be calculated in Pascals.

Use the equation to determine the amount of work required: w = -PΔV

Note: If the volume is measured in m³, and the pressure is measured in Pascals, the work will be measured in Joules. A system's work has a negative value as it gets bigger. A system's work (as it gets smaller) has a positive value.

Know more about pressure here

https://brainly.com/question/12971272#

#SPJ4

We can find the work of expansion by finding the difference between the final dimensions of the piece and the initial dimensions of the object. The work of expansion can be found out by the difference in dimensions.

We can find the work of expansion by finding the difference between the final dimensions of the piece and the initial dimensions of the object. The work of expansion can be found out by the difference in dimensions. Using the equation: ΔV = V(initial) - V(final), we can find ΔV, the change in volume in cubic meters, m³. The expansion of anything or metal takes place when we inflate it or it got heat on a higher scale, then the object inflate and it will be expanded by some extent. The difference can be find out if we notice the initial dimensions and final dimensions of the object. Then we subtract the dimensions and we will get our work of expansion just by noticing the initial and final readings of any object and then by calculating we can find our desired answer.

Learn more about Expansion:

brainly.com/question/14780533

#SPJ4

All of the following, with the exception of a very dense soil profile, could be signs that creep is taking place.

The most unstable substance that can form a bluff is clay and silt (muddy) sediment. These fine-grained sediments are brittle and prone to shifting in the form of major landslides, slow-moving creep, or moderately-sized slumping. Creep is described as a gradual increase in plastic deformation caused by shear loads when the material's yield strength is reached. Curved tree trunks, bowed fences or retaining walls, skewed poles or fences, and minor soil ripples or ridges are all signs of creep. The most dangerous type of mass movement is a landslide, which occurs when rock and earth unexpectedly collapse down a steep slope.

To learn more about slope click here https://brainly.com/question/29140119

#SPJ4

A projectile is fired from a gun near the surface of Earth. The initial velocity of the projectile has a vertical component of 148 meters per second and a horizontal component of 149 meters per second. It will 15 second take the projectile to reach the highest point in its path

There are numerous formulas available for computing time, final velocity, initial velocity, etc.

But in this case, the simplest formula to use would be:

v = u + at (where v is the final velocity, u is the beginning velocity, an is the acceleration, and t is the duration)

Since the bullet won't have any vertical velocity at its highest point and we're trying to calculate how long it takes to get there, we assume that the end velocity will be zero.

In the vertical direction, the initial velocity was stated as 148 m/s.

Gravitational acceleration is -9,8 m/s2 (negative due to taking the up direction as positive).

Inserting the values:

t = (v-u) / a

t = (0-148 m/s) / -9,8 m/s²

t = 15seconds

Learn more about Projectile at https://brainly.com/question/4129475

#SPJ4

If you find yourself approaching from the downwind side, you should use the distance from the incident to your maximum advantage or switch to wearing a self-contained breathing apparatus (SCBA).

The self-contаined breаthing аppаrаtus, or SCBА, is the foundаtionаl tool thаt provides the greаtest аmount of аirwаy protection from toxic gаs аnd hаrmful pаrticulаtes resulting from the fire. It’s essentiаl for modern firefighting аnd todаy’s complex fire grounds.

The term self-contаined meаns thаt the SCBА is not dependent on а remote supply of breаthing gаs (e.g., through а long hose). If designed for use under wаter, it is аlso known аs а Scubа set (self-contаined underwаter breаthing аppаrаtus). When not used underwаter, they аre sometimes cаlled industriаl breаthing sets. Unofficiаl nаmes include аir pаck, аir tаnk, oxygen cylinder or simply pаck, which аre mostly used in firefighting.

For more information about a self-contained breathing apparatus refers to the link: https://brainly.com/question/28432032

#SPJ4

Normal force: push due to contact with a surface such as the ground. always acts perpendicular to the surface.

The normal force is an everyday force that is felt when a surface pushes against an object that is placed on that surface.

For example, when a book is placed on a table, the normal force keeps the book from falling through the table. Gravity is pulling the book downward, but since the book isn't actually falling, something must be pushing it up. This force is called the normal force. The name 'normal' means perpendicular to the surface.

The normal force arises from the electromagnetic force; specifically, the electrons in the book push against the electrons in the table. Since the electrons don't want to get any closer to each other, the book stays on top of the table.

The normal force is closely related to the friction force. Both are non-conservative forces, which can be seen when a ball bounces. The ball falls; gravity pulls it down, so it speeds up, while air drag somewhat slows the fall.

When the ball hits the ground a huge normal force pushes upwards, making the ball bounce not quite as high as when it started. There is energy lost to changing the shape of the ball, which becomes thermal energy (warming the ball) and sound. The normal force can also be seen as non-conservative in the case of rolling resistance. The deformation of the tire (or wheel) means that energy is being lost to that change of shape.

Learn more about normal force at https://brainly.com/question/18799790.

#SPJ4

To calculate the masses of stars in a binary system, we must measure their orbital characteristics.

Binary stars are two stars that are gravitationally bound to each other and orbit around a common center of mass.

The masses of the two stars in a binary system can be calculated by measuring their orbital characteristics, such as their orbital period (the time it takes for the stars to orbit each other), their orbital radius (the distance between the stars at their closest approach), and their orbital eccentricity (a measure of the deviation of the orbit from a perfect circle). By analyzing these characteristics, astronomers can use the laws of gravity to calculate the masses of the stars in the system.

Other techniques for measuring the masses of stars include observing the spectra of the stars (which can reveal their surface gravity and temperature), observing the motion of the stars (which can reveal their mass through their acceleration), and observing the stars' interaction with other objects (such as planets or disks of dust and gas).

[tex]\bold{ \: \purple{Hope \: This \: Helps \: You!}}[/tex]

The greater the distance from the center of the circular path, the greater the tangential speed of the object. The angular speed of the object remains constant at any distance from the center of the circle.

Tangential velocity is the linear speed of any object moving along a circular path. A point on the outside edge of a turntable moves a greater distance in one complete rotation than a point near to the center

Therefore tangential velocity is the linear component of the speed of any object which is moving along a circular path. When an object moves in a circular path at a distance r from the center then the body's velocity is directed tangentially at any instant.

Learn more about tangential speed here: brainly.com/question/4387692

#SPJ1

You can draw a specified path or a custom path using the animation.

A specific issue or idea is illustrated in animation to help the audience better grasp it. Animation is a method for making still photos look to be in motion. On transparent celluloid sheets, images are physically painted or drawn, and subsequently the visuals are captured and filmed in traditional animation. After the motion is finished, a system can track it thanks to a custom path.

As a result, the animation enables you to create bespoke paths by drawing specified paths.

Learn more on custom path below,

https://brainly.com/question/20098799

#SPJ4

The formula KE = 1/2 mv2 describes the kinetic energy of a single N2 molecule, where m is the molecule's mass and v represents its velocity.

Kinetic energy is the energy that an object has as a result of motion. We have to work hard in order to apply a force. Energy is transmitted to the object once the work is accomplished, at which point it moves at a new, constant speed. A ball that is falling freely from a rooftop serves as an illustration of this. The ball has translational kinetic energy and is still falling straight down. The relationship between kinetic energy and an object's mass (m) and its squared speed is straightforward (v).

Kinetic energy has the following formula: K.E. = 1/2 m v2, where m is the object's mass and v is its square velocity. The kinetic energy is measured in kilograms-meters squared per second squared if the mass is measured in kilogrammes and the velocity is measured in metres per second.

As a result, the formula for the total kinetic energy of one mole of N2 molecules travelling at 1050 miles per hour is

KE = 1/2 (28.014 x 6.022 x 10^23) x (1050 mph)^2

KE = 1.11 x 10^29 Joules

To know more about Kinetic Energy visit:

https://brainly.com/question/26472013

#SPJ1

(a) The center of mass of the system is 1.26 m.

(b) If the man walks to the right edge of the boat, the center of mass of the system is unchanged, 1.26 m.

(c) After walking to the right edge of the boat, the man has moved 2.53 m from his original location.

(d) After walking to the right edge of the boat, the new location center of the boat is 0.88 m.

(e) The man ends up at 1.26 m.

A man stands at the left end of a uniform boat. The coordinate system is the man's original location as shown in the picture and we assume that there is no friction or drag between the boat and water. The picture is in the attachment.

The man's location is at x₁ = 0.

The center of the boat is at x₂ = L/2 = 1.65 m.

(a) The center of mass of the system would be

x₀ = (m₁x₁ + m₂x₂)/(m₁ + m₂)

x₀ = [51(0) + 168(1.65)]/(51 + 168)

x₀ = 277.2/219

x₀ = 1.26 m

(b) If the man walks to the right edge of the boat, the center of mass of the system would remain the same. This is because there is no friction between the boat and water. So, it would be 1.26 m.

(c) After walking to the right edge of the boat, the illustration of the man's location is shown in the attachment!

x₂ = x₁ - 1.65

The man's location (x₁) is at

x₀ = (m₁x₁ + m₂x₂)/(m₁+m₂)

1.26 = (51x₁ + 168(x₁ - 1.65)/(51+168)

1.26 = (51x₁ + 168x₁ - 277.2)/219

275.94 = 219x₁ - 277.2

553.14 = 219x₁

x₁ = 2.53 m

(d) The new location of the center of the boat is

x₂ = x₁ - 1.65

x₂ = 2.53 - 1.65

x₂ = 0.88 m

(e) If he walks to the very center of the boat, he would end up at the center of mass of system, at 1.26 m. The center of mass is unchanged as explained in point b.

Learn more about dog on a boat here:

brainly.com/question/13953758

#SPJ4

Therefore, the probability of the average mpg is greater than 28 by 0.8313.

Mean ( a ) is given as 26.3 mpg

Standard deviation (b) is  11.2 mpg

Number of cars to be tested (n) = 30

Applying the z-score formula,

The probability is given by, [tex]P(X < 28)[/tex]

[tex]= P(\frac{x-a}{\frac{b}{\sqrt{n} } } < \frac{28-26.3}{\frac{11.2}{\sqrt{30} } } )[/tex]

[tex]=P(\frac{x-a}{\frac{11.2}{\sqrt{30} } } < \frac{1.7}{\frac{11.2}{\sqrt{30} } } )[/tex]

[tex]=P\frac{x-a}{2.044} < \frac{1.7}{2.044}[/tex]

[tex]=P(Z < 0.8313)[/tex]

= 0.8313

Therefore, the probability of the average mpg is greater than 28 by 0.8313.

Learn more about probability:

brainly.com/question/30034780

#SPJ4

The manufacturer of a new compact car claims the miles per gallon (mpg) for the gasoline consumption is mound-shaped and symmetric i.e. a normal distribution. The probability of the average mpg achieved by these 30 cars will be greater than 28 is 0.8313.

Given that,

Mean a = 26.3 mpg

Standard deviation b = 11. 2 mpg

Number of cars to be tested n = 30

By applying the z score formula, we have, the probability as

P( X < 28)

= P ( X-a/ (b/√n) < 28-26.3/(11.2/√30))

= P ( X-a/ (11.2/√30) < 1.7/(11.2/√30))

= P ( X-a/2.044 < 1.7/2.044 )

= P ( Z < 0.8313)

Thus, the required probability of the average mpg is greater than 28 by 0.8313.

To know more about probability:

https://brainly.com/question/9454140

#SPJ4

The materials that were pulled together by gravity are most likely evidence that is used to indicate the beginning of a solar system formation.

Formation. About 4.5 billion years ago, a dense cloud of interstellar gas and dust gave rise to our solar system. The supernova shockwave from a nearby exploding star, or supernova, may have caused the cloud to collapse. This dust cloud burst into a spinning disk of material known as a solar nebula when it disintegrated.

In the early Solar System, dust and gas gathered together due to the attraction of gravity. The substance was heavier in the larger clusters. This implies that they could draw even more content in their direction. The Sun, planets, and moons were formed from these bigger objects.

Our planet continues to circle the Sun due to the Sun's gravitational attraction. Both the gravity of the Sun and the Earth have an impact on how the Moon moves. Every day, the tides rise and fall as a result of the Moon's gravitational influence on the Earth. There is a rise in sea level as the Moon crosses the ocean.

To know more about solar system visit:

https://brainly.com/question/12075871

#SPJ4

Most likely, the gravitationally drawn-together components serve as evidence for the emergence of the solar system. Formation. Our solar system was created from a massive cloud of interstellar gas.

And dust some 4.5 billion years ago. The collapse of the cloud may have been triggered by the supernova boom from a nearby exploding star, or supernova. This dust cloud collapsed into a spinning disc of matter called a solar nebula. Because of the Sun's gravitational pull, our planet keeps revolving around it. The motion of the Moon is affected by the gravitational pull of the Sun and the Earth. Gravitational attraction caused dust and gas to clump together in the early Solar System.

Learn more about gravitational here

https://brainly.com/question/12528243

#SPJ4

A racing car having mass 1910 kg and speed 109 (km/h) have the kinetic energy of 28,915 J.

According to question,

mass of a racing car =1910 kg

acceleration due to gravity=[tex]9.8m/s^{2}[/tex]

speed of a car=109 (km/h)

Kinetic energy is a type of power that a moving object or particle possesses. An item accumulates kinetic energy when work, which involves the transfer of energy, is done on it by exerting a net force. A moving object or particle has kinetic energy, which depends on both its mass and its rate of motion.

Now, Kinetic Energy[tex]=\frac{1}{2}mv^{2}[/tex]

Now, put the value of m and v in formula

Kinetic Energy=[tex]\frac{1}{2}(1910)(\frac{109*1000}{3600} )^{2}[/tex]

Kinetic Energy=28,915J

Learn more about Kinetic Energy

brainly.com/question/15764612

#SPJ4

A racing car with mass of 1910 kg and speed of 109 km/h has a kinetic energy of 875.62 kJ.

Now, let us convert km/h to m/s.

109 km/h = 109 × 5/18 = 30.28 m/s

Given,

Mass of the race car = 1910 kg

Speed = 30.28 m/s

Acceleration due to gravity = 9.8 m/s²

The kinetic energy can be calculated as,

K.E = 1/2 × m v² = 1/2 × 1910 × 30.28² = 875618.87 J = 875.62 kJ

Thus, the required kinetic energy of the racing car with mass of 1910 kg and speed of 109 km/h is 875.62 kJ.

To know more about kinetic energy:

https://brainly.com/question/30140635

#SPJ4

Answer:

A magnetometer must be level to the earth's surface, free of ferrous objects that might interfere with the earth's magnetic field, and with knowledge of the declination angle in order to determine compass headings.

Answer: the device must be level to the earth's surface, there should not be any ferrous materials interfering with the earth's field and the declination angle must be known.

Explanation:

A(n) Neap tide occurs when the sun is at right angels to the line between earth and the moon.

To learn more about Neap tide refert to:

https://brainly.com/question/2943080

#SPJ1

The types of measurement units used in Colombia is international System of Units (SI),  which is the successor of the Decimal Metric System.

The International System of Units, known by the international abbreviation SI in all languages and sometimes pleonastically as the SI system, is described as the modern form of the metric system and the world's most widely used system of measurement.

This means that since instead of inches, feet or miles, Colombia will  be using centimeters, meters and kilometers.

Learn more about Colombia at: https://brainly.com/question/2135193

#SPJ1

Work to be done  getting the cart to the top of the incline 2.4 m above the floor is  91.16 J.

Work is the product of the displacement's magnitude and the component of force acting in that direction.

frictional force = μ N = μ mg cos 30° = 0.45 × 4.50 × 9.8 × cos 30° N = 17.19 N.

Work to be done  getting the cart to the top of the incline 2.4 m above the floor =

Work done against friction + work done  against  gravity

= 17.19 × (2.4-0.670) × sin30° J + 4.50 × 9.8 ×  (2.4-0.670) J

= 91.16 J.

Learn more about work here:

https://brainly.com/question/21724760

#SPJ1