use tables to evaluate 13.81×14.28 in logarithmic
Answers
Answer:
197.2
Step-by-step explanation:
You want to use a table of logarithms to evaluate the product 13.81×14.28.
LogarithmsLogarithms turn a multiplication problem into an addition problem, along with some table look-ups. The basic idea is ...
log(ab) = log(a) +log(b)
Finding the logTo find the logarithm of a number, it can help to write it in scientific notation. This puts one non-zero digit to the left of the decimal point and expresses the multiplier as a power of 10. The first attachment shows a number in scientific notation.
A log table is used to find the logarithm of the mantissa of the number in scientific notation. The result will be a decimal fraction between 0 and 1.
You start by locating the first digits of the mantissa in the left column of the table, and additional digits across the top. The second attachment shows a portion of a table of logarithms with the relevant table entries identified.
The log of 13.81 = 1.381×10¹ is found by locating 13 in the left column, and the next digit, 8, at the top of the table. The final digit, 1, is located at the top of the portion of the table labeled Mean Difference. The number in the Mean Difference column is added to the number found in row 13, column 8: 1399 +3 = 1402. This sum is the mantissa of the logarithm of 13.81. (See the third attachment for the naming we're using.)
Similarly, the log of 14.28 is found in row 14, column 2, and the value in Mean Difference column 8 is added to that: 1523 +24 = 1547.
The characteristic of each logarithm is the corresponding characteristic of the number in scientific notation. For each of these numbers, it is 1.
log(1.381×10¹) = 1.1402log(1.428×10¹) = 1.1547Log of productThe logarithm of the product is the sum of these logarithms:
log(1.381×10¹ · 1.428×10¹) = 1.1402 +1.1547 = 2.2949
Finding the antilogThe value corresponding to this logarithm is found by a procedure that is the reverse of the lookup procedure.
Our logarithm has a characteristic of 2, and a mantissa of 0.2949.
First, we locate the highest number in the table that is less than or equal to the mantissa. Here, that value is 2945, located in row 19, column 7 of the table. The value we want, 2949, is 4 more than this, so we look in the Mean Difference table on row 19 for a value of 4. That is found in column 2.
The mantissa of the antilog of 2949 is the row number (19) with the column numbers appended: 1972. The decimal point for this is located to the right of the leading digit: 1.972.
The characteristic of the antilog is the characteristic of the logarithm: 2.
Then the antilog in scientific notation is ...
10^2.2949 = 1.972×10²
In standard form, this is ...
1.972×10² = 197.2
ProductThe desired product is found to be 13.81×14.28 ≈ 197.2.
__
Additional comment
Different tables of logs may show the interpolation values (Mean Difference) differently. These values are intended to aid in interpolating between table values so that you can find logs and antilogs of numbers with 4 significant digits. (Larger tables let you work with more significant digits.)
In general, the number of significant digits in the values you work with will be less than or equal to the number of significant digits in the logs in the table. Here, the table has 4-digit logs, so our result, 197.2, can have at most 4 significant digits. (The actual product is 197.2068.)
When the characteristic of a number is negative, care must be taken to use correct values for the mantissa and characteristic of the logarithm. Table values are logs of numbers between 1 and 10, and are positive. The log of 0.003949 would be the sum of the negative characteristic -3 and the positive logarithm mantissa 0.5965. That sum would be -2.4035 = (-2) + (-0.4035). Since we want to keep the fractional part positive, we sometimes add and subtract a large positive number. The logarithm of 0.003949 might be expressed in this way as 7.5965-10, effectively the log of 3.949×10⁷×10⁻¹⁰.
Related Questions
What is the measure of angle rst? 15° 75° 105° 165°
Answers
Answer:
The mesure of angle rst is 105
Answer:
105
Step-by-step explanation:
start by solving for x and then use what you know about the shape and it side to angle ratio
You take an SRS of size 500 from the 37,000 students at Purdue University. You then take an SRS of size 500 from the 4,400,000 adults in the state of Indiana. The margin of error in a 95% confidence statement for the Indiana sample is (a) the same as for the Purdue sample because both are samples of size 500. (b) smaller than for the Purdue sample because the population is much larger. (c) larger than for the Purdue sample because the population is much larger. (d) either larger or smaller than for the Purdue sample because it changes at random when we taker a sample.
Answers
Option A is correct because margin of error depends on sample size.
What is margin of error?Your results will vary from the actual population value by how many percentage points, as indicated by the margin of error. A 95% confidence interval with a 4% margin of error, for instance, indicates that your statistic will, 95% of the time, be within 4% of the true population figure.
Given sample size = 500
total outcomes = 37,000
the margin of error in a 95% confidence
the margin of error is given by
Margin of error (statistic) = Critical value x Standard error of the sample.
so according to the given condition margin of error in a 95% confidence is same as for the Purdue sample because both are samples of size 500, because it depnds on sample size.
Hence option A is correct.
Learn more about margin of error;
https://brainly.com/question/29101642
#SPJ1
If the basin is completely filled with water, how much water will it hold? round the answer to the nearest tenth of a foot. Ft3.
Answers
The amount of water that a basin holds depends on the size and shape of the basin.
The size and shape of a basin affects how much water it holds because it affects the surface area and volume of the basin. A basin with a larger surface area can hold more water than a basin with a smaller surface area. Similarly, a basin with a larger volume can hold more water than a basin with a smaller volume. For example, a shallow basin with a large surface area may be able to hold more water than a deep basin with a small surface area. Therefore, the size and shape of the basin will determine how much water it can hold.
The volume of a basin can be calculated by multiplying its length, width, and depth. For example, if a basin is 2 feet long by 1 foot wide by 1 foot deep, it would hold 2 cubic feet of water (2 x 1 x 1 = 2). Therefore, if the basin is completely filled with water, the answer would depend on its size and shape; it would need to be measured in order to calculate the exact amount of water it holds.
To learn more about Volume and surface area:
brainly.com/question/15612720
#SPJ4
A car travels 2.625 miles in 3.5 minutes at a constant speed. how far did the car travel in 5 minutes?
Answers
The car travels 3.75 miles in 5 minutes
GIVEN-
2.626 Miles in 3.5 mins
TO FIND-
Distance in 5mins
STEPS-
In 3.5 minutes it travels 2.625 miles
To find out how much it travels in only one minute, we divide 2.625 miles by 3.5 minutes
2.625/3.5 = 0.75 miles/minute
∵In m mins it traveled 0.75×m miles
since,distance d = 0.75 x m
∴In 5 mins it traveled 0.75x5 miles
=3.75miles
The car traveled 3.75 miles in 5 minutes
To learn more about speed:
https://brainly.com/question/13943409
three less than double of a number
Answers
Answer:
2x-3
Step-by-step explanation:
Not exactly sure what the question being asked is, but I assume its that you want this written out algebraically. Double a number can be represented by 2x, and 3 less can be represented by -3. Add these terms together and you get 2x-3.
CJ went to the market and bought 1.5 pounds of potatoes for dinner. He bought 2.5 times as many pounds of green beans. How many pounds of green beans did he buy at the market?
Answers
The pounds of green beans that CJ bought at the market will be 3.75 pounds.
How to illustrate the expression?In Mathematics, it is important to note that an expression is simply used to show the relationship between the variables that are provided or the data given regarding an information. In this case, it is vital to note that they have at least two terms which have to be related by through an operator. Some of the mathematical operations that are illustrated in this case include addition, subtraction, etc.
In this case, CJ went to the market and bought 1.5 pounds of potatoes for dinner. He bought 2.5 times as many pounds of green beans.
Therefore, the pounds of green beans that he bought at the market will be:
= 1.5 × 2.5
= 3.75 pounds.
Learn more about expressions on:
brainly.com/question/723406
#SPJ1
The mean value of land and buildings per acre from a sample of farms is $1700, with a standard deviation of $200.
The data set has a bell-shaped distribution. Assume the number of farms in the sample is 71.
(a) Use the empirical rule to estimate the number of farms whose land and building values per acre are between
$1300 and $2100.
___farms (Round to the nearest whole number as needed.)
Answers
Answer:
The empirical rule states that for a bell-shaped distribution, approximately 68% of the data will fall within one standard deviation of the mean, approximately 95% of the data will fall within two standard deviations of the mean, and approximately 99.7% of the data will fall within three standard deviations of the mean.
In this case, the mean is $1700 and the standard deviation is $200.
So, one standard deviation of the mean is 1700+200= $1900 and 1700-200 = $1500.
Therefore, according to the empirical rule, approximately 68% of the farms will have land and building values per acre between $1500 and $1900.
To estimate the number of farms that fall within this range, we can multiply the total number of farms (71) by 0.68.
(71)*(0.68) = 48.68 or about 49 farms
So, according to the empirical rule, approximately 49 farms will have land and building values per acre between $1300 and $2100.
PLEASE HELP MEEEEEEEEEEEEEEEEEE
Answers
Answer:
C, D, E
Step-by-step explanation:
Additive inverses is pretty much the same number, but one is positive and one is negative.
In this case C, D, and E would be it.
C; both are 7, but ones negative and ones positive
D; both are 20, but ones negative and ones positive
and same with E... both are 335, but ones negative and ones positive
In the absence of limiting factors, a population's growth follows a(n) _____ model.
a. geometric
b. exponential
c. logistic
d. mathematical
e. hypergeometric
Answers
Answer:
b- exponential
Step-by-step explanation:
right
1) Solve for d.
d+ 8 = -d - 10
-
d=
Answers
The value of d is -9.We can find by both sides solving for d.
What is subtraction and example?Subtraction means you are taking something away from a group or number of things. When you subtract what is left in the group becomes less. An example of a subtraction problem is the following: 5 - 3 = 2.
How do you solve for both sides?First we add and subtract same terms to get the variables on one side and the constants on the other.Then multiply or divide to isolate the variable.In the last solve for given variables.You must perform the same exact operation to each side of the equation.
Now we have
d+8=-d-10
d+d = -10-8
2d= -18
d= -9
To learn more about subtraction visit;
https://brainly.com/question/4319655
#SPJ1
Answer two questions about Systems AAA and BBB
1) How can we get System BBB from System AAA?
2) Based on the previous answer, are the systems equivalent? In other words, do they have the same solution?
Answers
1. To get system B form A: C. Swap only the right-hand sides of both equations.
2. They are not equivalent systems.
How to Find the Solution to a System of Equations?The point of intersection of two equations of a system gives us the solution, which is the coordinate of that point.
If two systems are equivalent, then they will have the same solution or point of intersection.
1. To get system B from A, the values at the right hand side of both equations were swapped.
2. The graph of system A, -10x - 4y = 0 and -2y + 7y = 8 is given in figure 1. The solution is (-0.64, 1.6).
The graph of system B, -10x - 4y = 8 and -2y + 7y = 0 is given in figure 2. The solution is (-0.8, 0).
Therefore, the systems are not equivalent.
Learn more about equivalent systems on:
https://brainly.com/question/1869465
#SPJ1
Please help thank you
Answers
Answer:
m= .5/5
Step-by-step explanation:
find the difference between the top 2 points in the y column then find the difference between the top 2 points of the x column then put the answer for y over the answer for x and you find the slope
If y varies directly with x and y = 39 when x = 3, find y when x = 1.
Answers
Due to proportionality, y has a value of 13 when x = 1.
What is proportionality?In mathematics, proportionality denotes a linear relationship between two quantities or variables. Both quantities increase in size when one double, and both decrease in size when one drops to a tenth of its original value.
Given that If y varies directly with x and y = 39 when x = 3
Since x is directly proportional to the x
thus,
y ∝ x
we can write it in a ratio form
y₂ / y₁ = x₂ / x₁ (asked value of y at x = 1)
y₂ / 39 = 1/ 3
y₂ = 13
Therefore, the Value of y at x = 1 is 13 due to proportionality.
Learn more about proportionality here:
https://brainly.com/question/29126727
#SPJ1
11. (6 points)
Reasoning Complete the following proof by providing
the reason for each statement.
Giving 20 points
Answers
The triangles ΔWXP and ΔZYP are congruent with each other by SAS postulates. Then angle ∠3 is equal to angle ∠4 which is ∠3 = ∠4.
What is the triangle?The polygonal shape of a triangle has a number of sides and three independent variables. Angles in the triangle add up to 180°.
It is given that ∠1 = ∠2 and WX = YZ
XP = YP (Side opposite to equal angles)
Then the triangles ΔWXP and ΔZYP are congruent with each other by SAS postulates.
The corresponding sides of the congruent triangles are equal. Then we have
WP = ZP
Then the corresponding exterior angles of the congruent triangles are also equal. Then we have
∠3 = ∠4
More about the triangle link is given below.
https://brainly.com/question/25813512
#SPJ1
What is the result when the number 14 is decreased by 2%?
Answers
Answer:
Step-by-step explanation:
14 - (2% × 14) =
14 - 2% × 14 =
(1 - 2%) × 14 =
(100% - 2%) × 14 =
98% × 14 =
98 ÷ 100 × 14 =
98 × 14 ÷ 100 =
1,372 ÷ 100 =
Answer : 13.72
Answer:
Step-by-step explanation:
Find out the difference between the numbers, Decrease = Old value - New value. Step 2: Divide this 'decrease' by the old value and multiply it by 100. This makes the percent decrease in the formula , Percent Decrease = (Old Value - New Value) / Old Value] × 100]
y>-²x+3
Line: Solid or Dashed?
Shade: Above or Below?
m=
b=
Are these points solution: (0,0)
(3,3)
(5,4)
Answers
On solving the provided question, we can say that - by doing the inequality equation, [tex]6x - 4 > 8 - 2x = > x > 3/2[/tex]
What is inequality?A connection between two expressions or values that is not equal in mathematics is referred to as an inequality. Inequality results from an imbalance, thus. In mathematics, an inequality establishes the relationship between two values that are not equal. Egality is not the same as inequality. Use the not equal symbol () in most cases when two values are not equal. To contrast values, whether they are tiny or huge, different inequalities are employed. By adjusting both sides until just the variables are left, you may eliminate many straightforward inequalities. However, several factors cause inequality: Divide or add negative values on both sides. Switch the left and right.
[tex]6x - 4 > 8 - 2x\\6x > -2x + 12\\8x > 12\\x > 3/2[/tex]
To know more about inequality visit:
https://brainly.com/question/29914203
#SPJ1
is u in the plane in set of real numbers rℝcubed3 spanned by the columns of a? why or why not?
Let u [-16 18 10] and A [2 -3 1 -4 5 1] Is u in the plane in R3 spanned by the columns of A? Why or why not? 10 Select the correct choice below and fill in the answer box to complete your choice. (Type an integer or decimal for each matrix element.) O A. No, the reduced row echelon form of the augmented matrix is which is an inconsistent system. O B. Yes, multiplying A by the vectorwrites u as a linear combination of the columns of A.
Answers
u in the plane in set of real numbers rℝcubed3 spanned by the columns, then the one solution matrix is, [tex]\left[\begin{array}{ccc}x_{1} &\\x_{2} &\\\end{array}\right][/tex] = [tex]\left[\begin{array}{ccc}2&\\6.66&\\\end{array}\right][/tex]
Given data,
Let u [-16 18 10] and A [2 -3 1 -4 5 1]
u in the plane in set of real numbers rℝcubed3 spanned by the columns of A,
So,
We can write,
u = [tex]\left[\begin{array}{ccc}-16&\\18&\\10&\end{array}\right][/tex] and A = [tex]\left[\begin{array}{ccc}2&-3\\1&-4\\5&1\end{array}\right][/tex]
Then,
AX = b
w = [tex]\left[\begin{array}{ccc}2&-3&-16\\1&-4&18\\5&1&10\end{array}\right][/tex]
A = [tex]\left[\begin{array}{ccc}2&-3\\1&-4\\5&1\end{array}\right][/tex]
null A = [tex]\left[\begin{array}{ccc}x_{1} &\\x_{2} &\\\end{array}\right][/tex]
[tex]\left[\begin{array}{ccc}2&-3\\1&-4\\5&1\end{array}\right][/tex] [tex]\left[\begin{array}{ccc}x_{1} &\\x_{2} &\\\end{array}\right][/tex]= [tex]\left[\begin{array}{ccc}0&\\0&\\0&\end{array}\right][/tex]
2[tex]x_{1}[/tex] - 3[tex]x_{2}[/tex] = 0
[tex]x_{1}[/tex] - 4[tex]x_{2}[/tex] = 0
5[tex]x_{1}[/tex] + 1[tex]x_{2}[/tex] = 0
We can solve the equations,
2[tex]x_{1}[/tex] - 3[tex]x_{2}[/tex] = 0
[tex]x_{1}[/tex] - 4[tex]x_{2}[/tex] = 0
-----------------------
[tex]x_{1}[/tex] - 7[tex]x_{2}[/tex] = 0
[tex]x_{1}[/tex] = 7[tex]x_{2}[/tex]
We can substitute [tex]x_{1}[/tex] values,
2[tex]x_{1}[/tex] - 3[tex]x_{2}[/tex] = 0
2*7[tex]x_{2}[/tex] - 3[tex]x_{2}[/tex] = 0
[tex]14x_{2}[/tex] - 3[tex]x_{2}[/tex] = 0
11[tex]x_{2}[/tex] = 0
[tex]x_{2}[/tex] = 0
[tex]\left[\begin{array}{ccc}2&-3\\1&-4\\5&1\end{array}\right][/tex] [tex]\left[\begin{array}{ccc}x_{1} &\\x_{2} &\\\end{array}\right][/tex]= = [tex]\left[\begin{array}{ccc}-16&\\18&\\10&\end{array}\right][/tex]
2[tex]x_{1}[/tex] - 3[tex]x_{2}[/tex] = -16
[tex]x_{1}[/tex] - 4[tex]x_{2}[/tex] = 18
5[tex]x_{1}[/tex] + 1[tex]x_{2}[/tex] = 10
We can solve the matrix equations,
2[tex]x_{1}[/tex] - 3[tex]x_{2}[/tex] = -16
[tex]x_{1}[/tex] - 4[tex]x_{2}[/tex] = 18
--------------------------
[tex]x_{1}[/tex] - 7[tex]x_{2}[/tex] = 2
[tex]x_{1}[/tex] = 2 + 7[tex]x_{2}[/tex]
[tex]x_{1}[/tex] = 2 + 7(0)
[tex]x_{1}[/tex] = 2
2[tex]x_{1}[/tex] - 3[tex]x_{2}[/tex] = -16
2*2 - 3[tex]x_{2}[/tex] = -16
4 - 3[tex]x_{2}[/tex] = -16
- 3[tex]x_{2}[/tex] = -16 - 4
- 3[tex]x_{2}[/tex] = -20
3[tex]x_{2}[/tex] = 20
[tex]x_{2}[/tex] = 20/3
[tex]x_{2}[/tex] = 6.66
Therefore,
u in the plane in set of real numbers rℝcubed3 spanned by the columns, then the one solution matrix is, [tex]\left[\begin{array}{ccc}x_{1} &\\x_{2} &\\\end{array}\right][/tex] = [tex]\left[\begin{array}{ccc}2&\\6.66&\\\end{array}\right][/tex]
To learn more about Matrix problems visit :
brainly.com/question/15892044
#SPJ4
The lines y = 5x -3 and y = ax +5 intersect when x = 13. What is the value of a?
Answers
Answer:
a= [tex]\frac{57}{13}[/tex]
Step-by-step explanation:
Find the value of y by subbing in x
y = 5x-3
y = 5(13) - 3
y = 62
Sub x and y into the 2nd equation, Solve for a
62 = a (13) + 5
62 = 13a + 5
57 = 13a
a= [tex]\frac{57}{13}[/tex]
The value of y varies jointly with the values of x and z. When and , the value of y is. What is the value of y when and ?.
Answers
The value of y when x = 4, z = 6 is 24.
The equation for the relationship between y, x and z is y = xz.
Given that x = 2 and z = 3, we have y = 2 * 3 = 6.
Therefore, when x = 4 and z = 6, y = 4 * 6 = 24.
The relationship between y, x and z can be expressed as y = xz, which means that the value of y is proportional to the values of x and z. When the values of x and z are given, we can calculate the value of y based on this equation. For example, when x = 2 and z = 3, the value of y is 2 * 3 = 6. Similarly, when x = 4 and z = 6, the value of y is 4 * 6 = 24. In general, when the values of x and z are given, the value of y can be determined by multiplying the values of x and z. Therefore, when x = 4 and z = 6, the value of y is 24.
Learn more about absolute value here
https://brainly.com/question/1301718
#SPJ4
rs.7500 for 1 year at 16% per annum compound at half yearly.
Answers
The sum or the compound interest were Rs. 10,089 & Rs. 2589, respectively, according to the supplied statement.
How is per annum calculated?Per year, as used in contracts, is used to describe ongoing duties, or those that take place continuously during the course of an agreement. For instance, if a customer pays 3% interest on a loan annually, it indicates that you will have to pay 3% more of the loan's principle each year until the deal is through.
Given : Initial principle amount (P) = Rs. 7500
Rate of interest (R) = 16% per annum
To find : Compound interest (C.I.) = ?
Solution :
It is given that Initial principle amount (P) = Rs. 7500
Rate of interest (R) = 16% per annum
Time (t) = 1 year = 2 ( ∵ Half Yearly)
We know the formula for Compound Interest,
Compound Interest (A) = [tex]P\left(1+\frac{R}{100}\right)^{n t}[/tex]
[tex]\begin{aligned}& =7500\left(1+\frac{16}{100}\right)^2 \\& =7500\left(\frac{100+16}{100}\right)^2 \\& =7500\left(\frac{116}{100}\right)^2\end{aligned}[/tex]
= 7500 * 1.345
= Rs. 10,089
Now, Compound interest = A - P
= 10,089 - 7500
= Rs. 2589
∴ Final amount = Rs. 10,089
Compound Interest = Rs. 2589
To know more about Per annum visit:
https://brainly.com/question/24256054
#SPJ1
The complete question is-
Calculate the amount and the compound interest on Rs. 7500 for 1 year at 16% p.a compounded half yearly
How do you draw y 3 on a graph?
Answers
We draw y=3 on a graph is a straight line perpendicular to y-axis and parallel to x-axis passing through point (0,3)
What is a straight line?An unending, one-dimensional figure with no width is a straight line. It consists of an infinite number of points connected on either side of a point. There is no curvature in a straight line. It might be angled, vertical, or horizontal. Any angle we draw between any two locations along a straight line will always be a 180-degree angle. By comprehending the equations of straight lines in various formats and learning how to solve questions based on straight lines, we will explore the universe of straight lines.
So that, we draw y=3 on a graph is a straight line perpendicular to y-axis and parallel to x-axis passing through point (0,3) as shown in attached diagram.
To learn more about linear line graph visit:
brainly.com/question/28494690
#SPJ4
A highlight table is used to _____.
Select an answer:
visualize the relative proportion of values in a table
emphasize the sort order of table values
hide values in a table that are equal to zero
colorize text based on a predefined color key
Answers
A highlight table is used to visualize the relative proportion of values in a table.
It is a way to present data in a graphical format that makes it easier to understand and compare the relative size of different categories.
It can be used to create a heatmap-like visualization that uses different colors or shades to indicate the relative frequency of values in a table. Highlight tables are useful for quickly identifying patterns and trends in large datasets, and for comparing the relative size of different categories of data.
They can also be used to compare data over time, or to compare data from different sources. Highlight tables can be created using various data visualization tools, such as spreadsheet software, data visualization libraries, or specialized data visualization software.
To know more about datasets click below:
https://brainly.com/question/24058780#
#SPJ4
Determine if the given equations are parallel, perpendicular or neither.
Equation 1: y = 8
Equation 2: x = −1
Answers
well, since one is a horizontal line and the other is a vertical line, Check the picture below.
a 1.00 l solution saturated at 25∘c with lead(ii) iodide contains 0.54 g of pbi2.
Answers
The Ksp of the lead II iodide is 6.4 * 10^-9.
What is the solubility product?We know that the solubility product has to do with the amount of the solute that we can be able to find that has dissolve in the saturated solution form the data that we have from the question that is given.
Now we know that;
Number of moles of the solute = mass/ molar mass
= 0.54 g/461 g/mol
= 1.17 * 10^-3 moles
Molarity = 1.17 * 10^-3 moles/ 1 L
= 1.17 * 10^-3 M
Then Ksp = [x] [2x]^2
Ksp = 4x^3
Ksp = 4( 1.17 * 10^-3 )^3
Ksp = 6.4 * 10^-9
Learn more about Ksp:https://brainly.com/question/27132799
#SPJ1
8. 52 - 2? +3
2c-4d
if c = -1 and d = -4
problem on the photo
algebra
also do problems #10 and #12
Answers
On solving the provided questyion, As a result, the answer to the given function issue is k = 0.01238 and 24,390 years.
Describe function.One variable in a function is defined in terms of another. The phrase "Y is a function of x" (symbolized as y = y(x)) indicates that y varies according to the value that the x expression assumes. Despite the fact that it is usually asserted that "x causes y," this is not always the case.
Given : t = 2005 -2000 = 5 years
a=6.124
Population =a
[tex]6.515 = 6.124\\= > =6.515/ 6.124\\= > ln( 6.515/ 6.124 ) = 5k\\= > k = 0.01238[/tex]
[tex]7.5 = 6.124\\= > = 7.5/ 6.124\\= > t = 150/280\\= > t =24,390 years.\\[/tex]
Therefore , the solution to the given problem of function comes out to be
[tex]k = 0.01238 and 24,390 years.[/tex]
To know more about function , visit
brainly.com/question/28193995
#SPJ1
The local hardware store is having a 15% off sale on lawnmowers this weekend X represents the original price of a lawn mower which answer Choice below shows two different Expressions that cold be used to find the price of any lawnmower pre-tax this weekend?
Answers
Answer:
X - X * 0.15 = 0.85X
X * 0.85 = X - X * 0.15
Both of these expressions can be used to find the price of any lawnmower pre-tax this weekend. The first expression calculates the price by subtracting 15% of the original price from the original price, and the second expression calculates the price by multiplying the original price by 85%.
How do you dilate a line segment around a point?
Answers
You dilate a line segment around a point by following a simple procedure mentioned below that begins with identifying the center of a line segment.
Dilating a line segment around a point is a simple process. First, you need to identify the center of the line segment.
Then, use a ruler or other measuring device to measure the distance from the center of the line segment to each end point.
To dilate the line segment, multiply the measured distance by the desired scale factor. Finally, draw a new line segment connecting the two new end points.
This will give you the dilated line segment around the point you identified at the beginning.
To learn more about segment, click here:
https://brainly.com/question/280216
#SPJ4
Ria’s age is x years old.Jai’s age is x/2 + 5.If Jai is elder than Amit,which of these could be the possible relation between Amit’s and Ria’s age?
Answers
Answer:
Ria is older than Amit
Step-by-step explanation:
x is ria's age
x = 1/2 x + 5
(subtract 1/2 x from both sides)
1/2 x = 5
(divide by 1/2)
x = 10
Ria is 10
x/2 + 5 is Jay's age
10/2 + 5 = 10
Ria and Jay are the same age, so if Jay is older than Amit, Ria is as well.
3. A music store sells a guitar for $45. If the local sales tax is 6%, what is the total cost of the guitar, including tax? Do NOT use a dollar sign in your
Answers
Answer:
£42.30
Step-by-step explanation:
6% of £45 = 2.7
£45-£2.70=£42.30
When you say don't use the dollar sign do you mean I should convert from dollars to pounds?
QUICK PLEASE HELP!
A function is graphed.
On which interval is the function increasing and linear?
Answers
Option B x = -2 to x = 1 in this interval the function is increasing and linear
What does a function show as increasing and decreasing?
If the value of f(x) grows as the value of x increases, the function is said to be increasing; conversely, if the value of f(x) decreases as the value of x increases, the function is said to be declining.
To determine if a function is increasing or decreasing on an interval, we need to know the sign of its first derivative on that interval. To determine if a function is linear, we need to know if the function is of degree one.
A function that is linear is of degree one and the graph of a linear function is a straight line, where the slope of the line is the coefficient of x.
To determine if a function is linear and increasing or decreasing on an interval, we need to determine the sign of the first derivative of the function on that interval, if the first derivative is positive, the function is increasing, if it is negative, the function is decreasing.
Additionally, it is also important to consider the domain of the function, to ensure the function is defined on that interval.
Learn more about increasing and decreasing function
https://brainly.com/question/13157110
#SPJ1
