Using information from your IR spectra for borneol, camphor and isoborneol, answer the following questions:
a. Which peak/s are present in both spectra of pure borneol and pure camphor between 1500 cm-1 - 4000 cm-1 ______________ cm-1
Which functional group/s are responsible for this peak ___________
b. Which peak is present in the spectrum of pure borneol and absent in that pure camphor between 1500 cm-1 - 4000 cm-1 ______________ cm-1
Which functional group/s are responsible for this peak ___________
c. Which peak is present in the spectrum of pure camphor and absent in that pure borneol between 1500 cm-1 - 4000 cm-1 ______________ cm-1
Which functional group/s are responsible for this peak ______________
. Would you expect the IR spectra of borneol and isoborneol to be the same or different? Provide a reason for your answer.
Thank you very much. I appreciate you answering all my questions.

Two students could obtain different values for the calculated area of the same rectangle due to rounding and the accuracy of their measurements.

To learn more about Conversion factors refer to:

https://brainly.com/question/28308386

#SPJ4

The layers of the earth as shown in the diagram are:

The Earth is composed of four distinct layers:

The Earth's outermost layers, the crust and the brittle upper part of the mantle, are together referred to as the lithosphere. The asthenosphere, another component of the upper mantle, and the atmosphere form its boundaries.

Located under the lithosphere, the asthenosphere is a region of the Earth's mantle that is thought to be significantly hotter and more fluid than the lithosphere. Between 100 km (60 miles) and 700 km (450 miles) below the surface of the Earth is the asthenosphere.

Learn more about layers of the earth at: https://brainly.com/question/10430823

#SPJ1

The carbonic acid dissociation constant, ocean pH and the bicarbonate ion concentration are required to to calculate the ocean concentration of the carbonate ion.

The concentration of a chemical species is the amount in moles per given litre of solution.

To calculate the ocean concentration of the carbonate ion, the data needed are:

The equation for calculating the carbonate ion concentration is given below:

[CO32-] =[tex]\frac{kA{-}[ HCO3-] }{H+}[/tex]

Therefore, to calculate the ocean concentration of the carbonate ion, the carbonic acid dissociation constant, ocean pH and the bicarbonate ion concentration are required.

To look more about bicarbonate ion click here

brainly.com/question/7378820

#SPJ4

Answer:

must be 9 g of water.

Explanation:

i did 18/2.

The final product of the beta decay of Thorium Th-231 is ²³¹Pa₉₁.

Beta decay can be explained as a kind of radioactive decay in which a beta particle is released from an atomic nucleus and is changing the real nuclide to an isobar.

Beta decay will transform it into a proton by the emission of an electron as well antineutrino. A proton is changed into a neutron by the liberating of a positron with a neutrino.

Neither the β-particle nor its anti-neutrino exist within the nucleus before β-decay but can be generated in the decay process.

The probability of decaying because of beta and other decay is estimated by its nuclear binding energy.

²³¹Pa₉₀  ²³¹Pa₉₁  + ⁰e₋₁

Learn more about Beta decay, here:

brainly.com/question/23642823

#SPJ1

We need 1.68 L of concentrated (14.7 M) phosphoric acid to prepare 25.0 L of 3.0 M H3PO4.

To prepare 25.0 L of 3.0 M H3PO4, we can use the formula:

M1V1 = M2V2

Where M1 = concentrated phosphoric acid (14.7 M)

V1 =  (the volume of concentrated phosphoric acid needed)

M2 = 3.0 M

V2 => 25.0 L

We can solve for V1 by substituting the values into the formula and rearranging:

V1 = (M2V2) / M1

V1 = (3.0 M * 25.0 L) / 14.7 M

V1 = 1.68 L

So, we need 1.68 L of concentrated (14.7 M) phosphoric acid to prepare 25.0 L of 3.0 M H3PO4.

Learn more about Phosphoric Acid here:

https://brainly.com/question/3700851

#SPJ4

the answer to your chemistry high school question is... the partial pressure is 11.7 moles

the answer is b

Explanation: its b

An addition reaction occurs when HBr is added to alkenes. Always, the more substituted carbon of the alkene receives the bromine (Markovnikov-selectivity)

An ethene-like compound known as a symmetrical alkene has the same groups at both ends of the carbon-carbon double bond. In the presence of organic peroxides or some airborne oxygen, the reaction takes place at ambient temperature. The two scenarios are identical because alkenes produce residues of organic peroxides when they react extremely slowly with oxygen.

Propene is an example of an unsymmetrical alkene because it has distinct groups at either end of the carbon-carbon double bond. The same conditions as with a symmetrical alkene apply for the reaction, but there is a challenge because the hydrogen and bromine can combine in two different ways.

Normally, the hydrogen becomes linked to the carbon with the most hydrogens when a molecule HX adds to a carbon-carbon double bond. The Markovnikov's Rule is what governs this. The peroxide effect or anti-Markovnikov addition occurs when HBr adds on the "wrong way around" in the presence of organic peroxides.

Hydrogen bromide adds to propene using an electrophilic addition process in the absence of peroxides. This results in the outcome that Markovnikov's Rule expected.

To know more about alkenes click here

https://brainly.com/question/29032376

#SPJ4

The state of matter of the aforementioned substance that most closely resembles liquid is determined by the forces of attraction.

The mass of a substance is determined by its temperature. Whether a substance is a gas, solid, or liquid depends on its temperature. The direction of a gas's molecules and atoms' motion depends on temperature.

A liquid is an incompressible fluid that maintains a constant volume under all conditions and conforms to the shape of its container. One of the four basic states of matter, it is also the only one to have a set volume but no fixed form.

to know more about temperature here:

brainly.com/question/15267055

#SPJ4

The pH of the acetic acid solution is 7.46.

A standard hydrogen electrode (SHE) is immersed in an acetic acid (CH3COOH) solution, and connected by an external circuit to an iron nail dipping into 0.10 M FeCl2. The measured potential of this cell, Ecell, is 0.24 V. To calculate the pH of the acetic acid solution, we must first understand the reaction taking place in the cell.

The SHE acts as the reducing agent in the cell, and is oxidized according to the following reaction:

SHE + H+ → H2

At the same time, the iron nail is acting as the oxidizing agent, and is reduced according to the following reaction:

Fe2+ + 2e- → Fe

Combining the two reactions, we can construct the overall cell reaction:

CH3COOH + H+ + Fe2+ → CH3COO- + H2 + Fe

Using the Nernst equation, we can calculate the pH of the acetic acid solution:

Ecell = E0cell - (RT/F) * ln( [CH3COO-] * [Fe] / [CH3COOH] * [Fe2+] )

Rearranging the equation:

pH = pK + log[ (Ecell - E0cell) / (RT/F) ] + log([CH3COOH]/[Fe2+])

Using the given values, we can calculate the pH of the acetic acid solution:

pH = 4.76 + log[ (0.24 - 0) / (0.0591) ] + log([1]/[0.10])

= 4.76 + 1.7 + 1

= 7.46

To learn more about acid, click here:

https://brainly.com/question/25148363

#SPJ4

The molarity of the aqueous acid, H₂SO₄ solution, given that 19.5 mL of the acid is needed to neutralize 25.9 mL of 0.0266 M LiOH solution is 0.0177 M

We'll begin by obtaining the mole ratio of the acid and based from the balanced neutralization equation for the reaction. This is given below:

H₂SO₄ + 2LiOH —> Li₂SO₄ + 2H₂O

Finally, we shall determine the molarity of the aqueous acid, H₂SO₄ solution. Details below

MaVa / MbVb = nA / nB

(Ma × 19.5) / (0.0266 × 25.9) = 1 / 2

Cross multiply

Ma × 19.5 × 2 = 0.0266 × 25.9

Divide both side by 19.5 × 2

Ma = (0.0266 × 25.9) / (19.5 × 2)

Ma = 0.0177 M

Thus, the molarity of the acid is 0.0177 M

Learn more about molarity:

https://brainly.com/question/13386686

#SPJ1

The different colors stem from the fact that the electrons of different elements absorb different amounts of energy. Option B

We know that in chemistry, the flame test is one of the ways that we can be able to find out the kind of element that we have. The process of the test is just that we can be able to moisten a salt of the test substance and then expose it to flame. The color that we see from the flame is the color of the electronic transition that is going on in the atom of the element.

Since we know that what is going on is that basically the electrons that are in the substance would just absorb energy and move from a one energy level to the next and this would lead to the emission of light of a characteristic color, this us what we see in the flame test.

Learn more about flame test:https://brainly.com/question/6357832

#SPJ1

The definition of a Bronsted-Lowry base is a b) proton (or hydrogen ion) acceptor.

Any species that can donate a proton qualifies as a Bronsted-Lowry acid, and any species that can accept a proton qualifies as a base. A Bronsted-Lowry base must have at least one lone pair of electrons in order to accept a proton and create a new bond with it. When one compound accepts a proton or H+ ion from another, the resulting conjugated acid is known as a Bronsted-Lowry base. While weak acids and bases only partially ionise in an aqueous solution, strong acids and bases do so completely. In response If there are fewer hydrogens, then the substance is acid (donates hydrogen ions). If the quantity of hydrogens increase then the substance is considered as base i.e. it accepts hydrogen ions.

To learn more about Brønsted-Lowry base click here:

https://brainly.com/question/21736327

#SPJ4

Options 1,2,4,and 6 are correct because of multiple factors that effect entropy of a reaction in various conditions.

1- Entropy is a state function-the current value doesn't depend on the reaction previous history.

2- Entropy is a measure of the randomness or disorder of the system.

4- Any spontaneous process increases the total entropy of the entire universe.

6- Entropy increases when a solid turns into a gas. The statement 3 is not correct, the standard entropy of a pure substance at a given temperature is not always zero. And statement 5 is not correct since the product of a chemical reaction doesn't have to have a higher entropy than the reactants, it depends on the specific reaction.

Learn more about Entropy here:

https://brainly.com/question/22748374

#SPJ4

The probability that it is your day off given that today is friday 12% or 0.12. Conditional probability is the probability of an event occurring given that another event has already occurred.

We can use Bayes' Theorem, which states that:

P(A | B) = P(B | A) * P(A) / P(B)

Where:

P(A) is the probability of event A happening (it is your day off)

P(B) is the probability of event B happening (today is Friday)

P(A | B) is the probability of event A happening, given that event B has happened (the probability that it is your day off, given that today is Friday)

P(B | A) is the probability of event B happening, given that event A has happened (the probability that it is Friday, given that it is your day off)

We know that the probability of it being Friday and your day off is 12%. This is the joint probability of events A and B.

P(A and B) = P(A) * P(B) = 0.12

We are also given that the probability that it is Friday and it's your day off is 12% which is equivalent to P(A and B)

We don't have the information about the probability of B given A, but we have P(A and B) and we know the probability of B and A.

so we can calculate P(A|B) as follows:

P(A|B) = P(A and B) / P(B) = (0.12) / (0.12 + x)

Where x is the probability of B given A is not true.

This formula tells us that the probability that it is your day off, given that today is Friday, is 12% or 0.12

Learn more about Probability here:

https://brainly.com/question/30034780

#SPJ4

Given that it is Friday today, the likelihood that it is your day off is 12%, or 0.12. The likelihood of an event happening given that another event has already happened is known as conditional probability.

Using the Bayes' Theorem, which says:

P(B | A) * P(A) / P(A | B) = P(B | A) (B)

Where:

The probability of an event is P(A). an occurrence (it is your day off). P(B) is the likelihood that event B will occur (today is Friday)

P(A | B) represents the likelihood that event A will occur given that event B has already occurred (the probability that it is your day off, given that today is Friday). P(B | A) is the likelihood that event B will occur assuming that event A has already occurred (the likelihood that it will be Friday).

To learn more about probability, click here.

https://brainly.com/question/30034780

#SPJ4

The binding agent that powdered pigment is mixed with to form paint is known as the binder or vehicle.

A binder, also known as a vehicle or medium, is a substance that is added to powdered pigments to form paint. The binder serves as the adhesive that holds the pigments together and attaches them to a surface. Without a binder, the pigments would simply be a dry powder that would not stick to a surface or retain its color over time. Binders can be made from a variety of materials, including natural and synthetic substances. Some common types of binders used in paint include:Oil-based binders, such as linseed oil, which are derived from plants and animals. Synthetic binders, such as acrylics, alkyds, and polyurethanes, which are made from chemicals. Water-based binders, such as gum arabic, which are water-soluble and can be thinned with water.

Learn more about synthetic substances here:

https://brainly.com/question/29261907

#SPJ4

Prokaryotic cells typically have diameters ranging from 0.1 to 5.0 micrometers (m) and are substantially smaller than eukaryotic cells, which typically have diameters ranging from 10 to 100 m.

A single-celled creature called a prokaryote lacks a nucleus and other membrane-bound organelles. The term prokaryote is derived from the Greek and v. Prokaryotes were classed into the empire Prokaryota in the two-empire concept developed by Édouard Chatton. A nucleoid area, DNA and RNA as genetic material, ribosomes that create proteins, and cytoplasm that contains a cytoskeleton that organizes cellular components are all present in all prokaryotic cells. Prokaryotic creatures, on the other hand, are a tremendously varied group of organisms that exist in a wide range of forms and sizes.

Here,

Prokaryotic cells typically have diameters ranging from 0.1 to 5.0 micrometers (m), making them substantially smaller than eukaryotic cells, which typically have dimensions ranging from 10 to 100 m.

To know more about prokaryotic cell,

https://brainly.com/question/29771587

#SPJ1

q = mCT, q = heat =?, m = mass of water (not of the chips) = 58.18 g, C = specific heat of water = 4.184 J/g-deg, T = change in temperature = 28.1 - 21.5 = 6.6 deg, and q = (58.18 g)(4.284 J/g-deg)(6.6 deg).

Equation q = -CT, where C is the calorimeter's heat capacity and T is the temperature change, can be used to determine how much heat is released during the reaction. Since the combustion takes place at a constant volume, the reaction's q is equal to E.

q = MSP heat, where q = heat quantity, expressed in joules (J). 1 degree C Mass, expressed in grams, is K. m. t = °C or K of temperature change. The amount of heat needed to increase the temperature of a specified quantity of a substance by one degree is known as the heat capacity, or C, of the substance.

to know more about calorimeters here:

brainly.com/question/4802333

#SPJ4

Here is the electron configuration of each of the following atoms:

[tex](a) N^2^-: 1s_22s_22p_3\\(b) Ca^2^+: 1s_22s_22p_63s_23p_6\\(c) S^-: 1s_22s_22p_6\\(d) Cs^2+: [Xe] 6s_1\\(e) Cr^2^+: [Ar] 3d_3\\(f) Gd^3^+: [Xe] 4f_7 5d_1 6s_2[/tex]

Here is the electron configuration of each of the following atoms:

[tex](a) C: 1s_22s_22p_2\\(b) P: 1s_22s_22p_63s_23p_3\\(c) V: [Ar] 3d_3 4s_2\\(d) Sb: [Kr] 5s_2 5p_3 4d_10 5p_3\\(e) Sm: [Xe] 4f_6 6s_2 6p_6 5d_1 4f_6[/tex]

Electron configurations are used to describe the arrangement of electrons in an atom. They are written in the format [noble gas] [subshell], where the noble gas is the element with the same number of electrons as the atom in question, and the subshell is the additional electrons that the atom has.

Learn more about electron configuration, here https://brainly.com/question/29757010

#SPJ4

5.0 mol Al produces up to 2.5 mol Al2O3 and 6.0 mol O2 produces up to 4.0 mol Al2O3. The mass of Al2O3 forms 47.2 g.

A body's mass is an inherent quality. Prior to the discovery of the atom and particle physics, it was widely considered to be tied to the amount of matter in a physical body.

The amount of matter in a particle or object is represented by the dimensionless quantity mass (symbolized m). The kilogramme is the International System's (SI) preferred unit of mass (kg).

Atomic mass of Al - 27, O - 16

Al₂O₃ molecular mass

= 2 * 27 + 3 * 16

= 102

54 g Al ⇾ 102 g Al₂O₃

25g Al ⇾ x g Al₂O₃

x = 25 * 102 / 54

= 47.2 g Al₂O₃

Thus, The mass of Al2O3 forms 47.2 g.

To learn more about the mass, follow the link;

https://brainly.com/question/19694949

#SPJ1

Answer:

255

Explanation:

Since the amount of Al that can react is limiting, the theoretical yield of Al2O3 will be based on the amount of Al available.

From the balanced equation, we can see that 4 mol Al produces 2 mol Al2O3:

4 Al + 3 O2 → 2 Al2O3

So, 5.0 mol Al will produce:

2.5 mol Al2O3 = 2 mol Al2O3/4 mol Al * 5.0 mol Al = 2.5 mol Al2O3

The molar mass of Al2O3 is 102 g/mol, so:

mass of Al2O3 = 2.5 mol Al2O3 * 102 g/mol = 255 g

Therefore, the mass of Al2O3 that forms is 255 g, rounded to the nearest ones place.

The gold that would be plated from jewelry that is electroplated with gold for 25 seconds at 1.5A is 0.07 grams.

The gold that would be plated can be calculated according to the electrochemical equation which is AU ++ 1e-Au(s).

Now, electrochemical reaction will result the plating of 1 atom of gold for 1 electron. So for 25 seconds at 1.5 A, we get 1.5*25 = 37.5 coulombs of electrons since the ampere is equal to coulomb per second.

The number of electrons we have if coulomb of electrons about 6.241Ă*10^18 electrons is 6.241Ă*10^18*37.5 = 2.34*10^20. Then we can calculate the moles using Avogadro's number which is 2.34*10^20 / 6.02*10^23 = 3.88*10^-4.

Then, we can calculate the grams of gold by multiplying the number of moles by the weight of the atom gold. So, 3.88*10^-4 * 196.96657 = 7.65*10^-2.

Thus the number of gold that would be plated in grams is 7.65*10^2 or equal to 0.077 grams.

Learn more about plated here:

brainly.com/question/23550782

#SPJ4

The group 1 metals placed in the periodic table is called as the Alkali metals. because of their oxides and the hydroxide form alkaline solution with water.

The group 1 elements called as the alkali metal as their oxides and their hydroxides form the alkaline solution with the water. The alkali metals are given as :

These elements are the metals except the hydrogen . the hydrogen element is the non metal nut place in the group 1. the hydrogen is the exception. the alkali metals are very reactive.

To learn more about elements here

https://brainly.com/question/17105472

#SPJ4

The periodic table's group 1 metals are referred to as alkali metals. due to the formation of an alkaline solution with water by their oxides and hydroxides.

When combined with water, the group 1 elements known as the alkali metals' oxides and hydroxides create an alkaline solution. The following are the alkali metals:

Hydrogen - H

Rubidium - Rb

Lithium - Li

Sodium - Na

Potassium - K

Francium - Fr

Cesium - Cs

With the exception of hydrogen, these elements are all metals. The non-metal  spot in group one is occupied by the hydrogen element. The exception is hydrogen. The reactiveness of alkali metals is high. it is due to only 1 electron in the outer most energy shell which is not under high attraction from the nucleus due to shielding effect of inner electrons.

To learn more about elements click here:

https://brainly.com/question/17105472

#SPJ4

Answer:

The scientific method is a systematic approach to problem-solving that is used to explore and understand the natural world. It is based on the idea that knowledge is acquired through observation and experimentation, and that new ideas can be tested and refined through the scientific process.

Scientific question: How does the concentration of a solute in a solvent affect the rate of diffusion?

Hypothesis: If the concentration of a solute in a solvent is increased, then the rate of diffusion will also increase.

Experiment:

Obtain a container with a flat bottom and a lid, such as a petri dish or a covered glass dish.

Fill the container with a solvent, such as water.

Add a solute to the solvent, such as salt or sugar. Vary the concentration of the solute by adding different amounts.

Place a drop of food coloring in the center of the solvent.

Close the lid of the container and observe the rate at which the food coloring spreads outwards.

Repeat the experiment with different concentrations of the solute to compare the results.

Citation:

"Scientific Method." Encyclopedia Britannica, Encyclopedia Britannica, Inc., www.britannica.com/topic/scientific-method.

Explanation:

The correct formula for antimony (V) phosphide is SbP5. This formula reflects the fact that there is one antimony atom and five phosphorus atoms in the compound, with the antimony having an oxidation state of +5.

Chemical nomenclature is the practice of assigning names to chemical compounds. This is done using the rules of IUPAC nomenclature, which involves using prefixes, suffixes, and numerical prefixes to indicate the structure of the compound. For example, the chemical name for water is dihydrogen monoxide, which indicates that it contains two hydrogen atoms and one oxygen atom.

Learn more about antimony (V) phosphide :

https://brainly.com/question/824434

#SPJ4

According to superposition principle of rocks the oldest sedimentary rock layer is in the bottom and the youngest will be the upper layer.

One of the geological laws that geologists use to calculate the relative ages of rock strata, or layers, is the law of superposition. According to this theory, rock layers are stacked or deposited one on top of the other. The bottom will have the oldest rock strata and the top will have the youngest.

Earlier rocks, which were horizontally deposited over the older layers, are buried deeper in the planet than younger ones. This now widely accepted idea, which is also known as the Law of Superposition, is regarded as a fundamental rule of geology.

Long before the technology existed to compute the precise ages of rocks, geologists were able to use this principle to identify the oldest rock layers.

To find more on superposition principle, refer here:

https://brainly.com/question/2699638

#SPJ1

The number of moles of oxygen (O₂) that will combine with 0.05 mol of methane (CH₄) is 0.1 moles of oxygen.

The mole ratio of the reaction of oxygen with methane is determined from the equation of the reaction of oxygen with methane.

The equation of the reaction of oxygen and methane is given below as follows:

CH₄ + 2 O₂ ---> CO₂+ 2 H₂O

The mole ratio of the reaction of oxygen with methane is 2 : 1

Hence, 0.05 moles of methane will require 0.05 * 2 moles of oxygen

0.05 moles of methane will require 0.1 moles of oxygen.

Learn more about mole ratio at: https://brainly.com/question/19099163

#SPJ1

A ligand is an atom or molecule that binds to a central atom or ion. The porphyrin ring Fe(II) ion in oxymyoglobin is coordinated by four nitrogen atoms from the porphyrin ring,

two oxygen atoms, and two histidine residues (distal and proximal). Therefore, all of the listed options are ligands.

In oxymyoglobin, the four nitrogen atoms of the porphyrin ring (tetrapyrole) are coordinated to the Fe(II) ion. These nitrogen atoms can be considered as donor atoms, donating electrons to the metal ion. The two oxygen atoms of the heme group and the two histidine residues (distal and proximal) are also donating electrons and thus considered as ligands. All of these atoms and molecules are involved in the coordination of the Fe(II) ion in oxymyoglobin and can be considered as ligands.

learn more about oxymyoglobin here

https://brainly.com/question/30078402

#SPJ4

Nucleophilic substitution is indicated by the letter "S," while a single molecular rate-determining step is indicated by the number "1."

As a result, it is common to depict the rate equation as depending first-order on the substrate and zero-order on the nucleophile. This correlation exists when the nucleophile concentration is substantially higher than the intermediates. Instead, steady-state kinetics may provide a more realistic description of the rate equation. Reactions of secondary or tertiary alkyl halides under extremely basic conditions or, under strongly acidic conditions, with secondary or tertiary alcohols are prominent examples of this process, which involves a carbocation intermediate.

In contrast, the SN2 alternative reaction takes place with primary and secondary alkyl halides. The SN1 reaction is also known as the dissociative substitution in inorganic chemistry.

The complete question and answer are attached as an image.

Want to know more about SN1 reaction visit the link which is given below;

https://brainly.com/question/29558712

#SPJ4

Natural gas is a renewable resource and can be conserved by recycling plastic bottles before buying a new plastic bottle of water.

A renewable resource can be described as a flow resource, a natural resource that will replenish to replace the portion depleted by usage and consumption. When the recovery rate of resources can be defined as unlikely to ever exceed a human time scale, these are known as perpetual resources.

Renewable resources can be described as a part of Earth's natural environment. A positive life-cycle assessment can be defined as a key indicator of sustainability.

Biorenewable chemicals can be defined as chemicals formed by biological organisms that offer feedstocks for the chemical industry. Biorenewable chemicals can give solar-energy-powered substitutes for the petroleum feedstocks that supply the chemical industry.

Learn more about nonrenewable sources of energy, here:

brainly.com/question/10402348

#SPJ1