Answer: Speed and velocity are both measured using the same units. The SI unit of distance and displacement is the meter. The SI unit of time is the second. The SI unit of speed and velocity is the ratio of two — the meter per second .
Explanation: Hopefully this helps you.
PLEASE HELP ASAP
In this diagram you see a wave. B is at the high point of the wave; D is at the low point in the wave. A, D, and E are located where the wave crosses the t-axis.
Which letter represents the trough of the wave?
when energy is transferred from ond object to another, what must occur?
Answer:kinetic energy
Explanation:
if a book of mass 50 kg is placed on the table of mass 200 kg what will be the weight of table and reaction of table on the book?
Answer:
See the answer below.
Explanation:
The weight of the table should be equal to the weight of the table plus the weight of the book.
[tex]w_{table}=m_{table}*g\\w_{table}=200*9.81\\w_{table}=1962[N][/tex]
And for the book
[tex]w_{book}=m_{book}*g\\w_{book}=50*9.81\\w_{book}=490.5[N][/tex]
And the total weight
[tex]w = w_{table}+w_{book}\\w=1962+490.5\\w = 2452.5 [N][/tex]
For the system to be in balance, the reaction force exerted by the table on the book must be equal to the weight of the book. This force in physics is known as the normal force.
[tex]N_{force} = w_{book}\\N_{force}=490.5[N][/tex]
is throwing a ball against a wall newton's 3rd law ?
Answer: Yes
Explanation: Yes
Unlike acceleration and velocity, speed is NOT a quantity that accounts for..
a. distance
b. direction
c. time
d. movement
Answer:
B
Explanation:
direction is literally the only difference between speed and velocity
Taking into account the definition of speed and velocity, the correct answer is option b. Unlike acceleration and velocity, speed is NOT a quantity that accounts for direction.
SpeedSpeed refers to the distance an object travels in a given time and is a scalar quantity.
VelocityOn the other hand, velocity is a magnitude that expresses the relationship between the space traveled by an object, the time used for it and its direction. In other words, velocity refers to the interval of time it takes for an object to move towards a certain direction. Since velocity considers the direction in which an object moves, it is considered a vector character magnitude.
SummaryIn summary, speed does not take into account the direction of movement, while speed implies the change of position of an object in space within a certain amount of time, that is, speed plus the direction in which said movement is produced.
Correct answerFinally, the correct answer is option b. Unlike acceleration and velocity, speed is NOT a quantity that accounts for direction.
Learn more:
https://brainly.com/question/13881070?referrer=searchResultshttps://brainly.com/question/11214858?referrer=searchResultsEarthquakes are especially associated with ___ boundaries
Can someone please help with this one?!
Answer:
Explanation:
i wanna say its A
A sailboat on a lake sails 90. meters north and then sails 60. meters due east. Compared to its starting position, the new position of the sailboat is
show your work
Answer:
The new position of the sailboat is 108.2 m, at N 53.3° E
Explanation:
From the image uploaded, R is the resultant displacement and it is calculated as;
R² = 90² + 60² (Pythagoras theorem)
R² = 11700
R = √11700
R = 108.2 m
The direction of the boat is given by θ in the image uploaded;
tanθ = opp/adj
tanθ = 90 / 60
tanθ = 1.5
θ = tan⁻¹(1.5)
θ = 53.3°
θ = N 53.3° E
Therefore, the new position of the sailboat is 108.2 m, at N 53.3° E
Suppose an automobile has 2000-joules of kinetic energy. when it moves at twice the speed, what will be its kinetic energy? what's its kinetic energy at three times the speed?
Answer:
K.Eₓ = 4 K.E
K.Eₓ = 9 K.E
Explanation:
Th formula for the kinetic energy of a body is given as follows:
[tex]K.E = \frac{1}{2}mv^2\\[/tex] ---------------equation (1)
where,
K.E = Kinetic Energy of Automobile
m = mass of automobile
v = speed of automobile
For twice speed:
vₓ = 2v
then,
[tex]K.E_{x} = \frac{1}{2}mv_{x}^2\\K.E_{x} = \frac{1}{2}m(2v)^2\\K.E_{x} = 4\frac{1}{2}mv^2\\[/tex]
using equation (1):
K.Eₓ = 4 K.E
For thrice speed:
vₓ = 3v
then,
[tex]K.E_{x} = \frac{1}{2}mv_{x}^2\\K.E_{x} = \frac{1}{2}m(3v)^2\\K.E_{x} = 9\frac{1}{2}mv^2\\[/tex]
using equation (1):
K.Eₓ = 9 K.E
A. The kinetic energy of automobile when it moves at twice the speed is 8000 J
B. The kinetic energy of automobile when it moves at three times the speed is 18000 J
Let the mass of the automobile be constant.
Let the initial velocity be v
A. Determination of the kinetic energy of the automobile when it moves at twice the speed.
Initial kinetic energy (KE₁) = 2000 JInitial velocity (v₁) = vFinal velocity (v₂) = 2vFinal kinetic energy (KE₂) =?KE₁ /v₁² = KE₂ / v₂²
2000 / v² = KE₂ / (2v)²
2000 / v² = KE₂ / 4v²
Cancel out v²
2000 = KE₂ / 4
Cross multiply
KE₂ = 2000 × 4
KE₂ = 8000 J
B. Determination of the kinetic energy of the automobile when it moves at three times the speed.
Initial kinetic energy (KE₁) = 2000 JInitial velocity (v₁) = vFinal velocity (v₂) = 3vFinal kinetic energy (KE₂) =?KE₁ /v₁² = KE₂ / v₂²
2000 / v² = KE₂ / (3v)²
2000 / v² = KE₂ / 9v²
Cancel out v²
2000 = KE₂ / 9
Cross multiply
KE₂ = 2000 × 9
KE₂ = 18000 J
Learn more about kinetic energy:
https://brainly.com/question/10703928
How is it technically correct to say that a car making a u-turn can have a constant speed but cannot have a constant velocity?
During the "U" part of the turn, the car would follow an approximately circular path, and if it's moving at a constant speed, it would have to accelerate toward the center of the circle in order to change its direction.
1.-Sean los siguientes vectores A=3i + 2j - 7 k B=3J + 6 K + 5 i Hallar a) |A| b) A+B c) |A+B| d) A-B e) 2A+3B
Answer:
A = 2,
Explanation:
(3 + 2) - 7
2 - A: 2
3 + 6 + 5
14 - B: 14
YOUR WELCOME
Two circular rods, both of length L and having the same diameter, are placed end to end between rigid supports with no initial stress in the rods. The coefficient of linear expansion and Young's modulus for rod A are αA and YA respectively; those for rod B are αB and YB respectively. Both rods are "normal" materials with α>0. The temperature of the rods is now raised by ΔT.
What is the stress F/A in the rods after heating?Express the stress in terms of ?A, ?B, YA, YB, and ?T.
Answer:
[tex]\mathbf{\dfrac{F}{A}= -\dfrac{( \alpha_A + \alpha _B)\Delta T}{\bigg ( \dfrac{1}{Y_A}+ \dfrac{1}{Y_B}\bigg )} }[/tex]
Explanation:
From the information given.
The formula for Youngs modulus(Y) can be illustrated as follows:
[tex]Y = \dfrac{F/A}{\Delta L /L}[/tex]
where;
F = force
A = area
ΔL / L = the fraction of the change that occurred in the length.
If we make ΔL / L the subject of the formula, the above expression can be re-written as:
[tex]\dfrac{\Delta L}{L } = \dfrac{1}{Y}\dfrac{F}{A}[/tex]
However, the total fractional change that occurred in the length can be computed as:
[tex]\dfrac{\Delta L_{compressive \ stress}}{L} = \dfrac{\Delta L_A}{L_A} + \dfrac{\Delta {L_B}}{L_B}[/tex]
where;
[tex]L = L_A = L_B[/tex]
The area of both rods is said to be equal as well.
Thus;
[tex]\dfrac{\Delta L_{compressive \ stress}}{L} = \dfrac{1}{Y_1} \dfrac{F}{A}+ \dfrac{1}{Y_2}\dfrac{F}{A}[/tex]
[tex]\dfrac{\Delta L_{compressive \ stress}}{L} =\bigg( \dfrac{1}{Y_1} + \dfrac{1}{Y_2} \bigg ) \dfrac{F}{A}[/tex] ----- Let this be equation (1)
Recall that:
[tex]\dfrac{\Delta L }{L }= \alpha \Delta T[/tex]
in which
ΔL = change in length
L = the original length of rod before extension
∝ = coefficient of linear expansion
ΔT = temperature change
Similarly:
The total fractional change in the length is:
[tex]\Delta L _{thermal} = \Delta L_A +\Delta L_B[/tex]
[tex]\Delta L _{thermal} = \alpha_AL \Delta T+\alpha_BL \Delta T[/tex]
[tex]\dfrac{\Delta L _{thermal}}{L} =( \alpha_A+ \alpha _B) \Delta T \ \ \ ---(2)[/tex]
The sum of both the thermal and compressive stress of the combined rod is equal to the fractional change.
Mathematically:
[tex]\Delta L_{net} = \Delta L_{thermal} + \Delta L_{compressive \ stress}[/tex]
where;
[tex]\Delta L_{net} =0[/tex]
∴
[tex]0 = \Delta L_{thermal} + \Delta L_{compressive \ stress}[/tex]
[tex]\Delta L_{compressive \ stress} =- \Delta L_{thermal}[/tex]
From equation (1) & (2)
[tex]\bigg( \dfrac{1}{Y_1} + \dfrac{1}{Y_2} \bigg ) \dfrac{F}{A}= - (\alpha_A + \alpha_B) \Delta T[/tex]
Making the stress [tex]\dfrac{F}{A}[/tex] the subject, we get;
[tex]\mathbf{\dfrac{F}{A}= -\dfrac{( \alpha_A + \alpha _B)\Delta T}{\bigg ( \dfrac{1}{Y_A}+ \dfrac{1}{Y_B}\bigg )} }[/tex]
PLEASE HELP ;w;
What is the difference in energy expended to do work between a crane lifting a 100-N block 6 m above the ground versus a crane lifting a 100-N block 11 m above the ground?
0 J
5 J
100 J
500 J
Answer:
500 J
Explanation:
100 X 6=600
100 X 11=1,100
1,100-600=500J
Which of the following can occur when an object is accelerating?
A. It speeds up
B. It slows down
C.
Changes in Direction
D.
All of the above is acceleration
Answer:
D
Explanation:
Change in speed or direction is acceleration
An object accelerates when it is moving faster. Option A is corect.
What is acceleration?The rate of velocity change concerning time is known as acceleration. According to Newton's second law, the eventual effect of all forces applied to a body is its acceleration.
The pace at which a body's velocity varies is represented by acceleration, which is a vector quantity.
[tex]\rm a = \frac{v-u}{t}[/tex]
Where,
u is the initial speed in m/sec
v is the final speed in m/sec
t is the time interval in sec
a is the acceleration in m/sec²
When an object is accelerating it speeds up.
Hence option A is correct.
To learn more about acceleration, refer to the link;
https://brainly.com/question/2437624
#SPJ2
Which does not decrease your chances of being injured
A Warmup
B Overload
C Exercise
D Cooldown
Perform the following operation observing proper significant digits.
323.7 cm+ 100 cm+ 6.8 cm= _____.
A. 430.51 cm
B. 429.0 cm
C. 430.5 cm
D. 431 cm
Answer:
430.5 cm
Explanation:
first we detect point digt than
323+100+6
=429
now point digt
0.7+0.6
1.5
add both:-
429+1.5
=430.5
does anyone know the answers to these ?
Directions: Label the name of the element found in the body. Which one is an Isotope?
Answer:
Carbon Dioxide
Explanation:
Isotopes can be found in Carbon 12
Traveling at high altitudes_________ vehicle engine performance when compared to operating the same vehicle at sea level
Answer:
Lessens
Explanation:
The performance of an engine at high altitudes is lower due to the decreasing density of air with elevation, such that at high altitude, the density is much less and a given quantity of oxygen occupies much more space at high altitudes, and the oxygen content in the air drawn in is lesser at high altitude, and the combustion power is much lesser at high altitudes when the engine speed is high up to about 4000 rpm.
A bungee jumper hangs from a bungee cord with zero velocity. If the bungee
cord has a spring constant of 18 N/m and the jumper has a mass of 113 kg,
how stretched is the bungee cord past its natural length?
A. 1.56 m
B. 61.5 m
C. 6.27 m
D. 18.2 m
SUBMIT
Answer:
C maybe
Explanation:
A bungee jumper hangs from a bungee cord with zero velocity. If the bungee cord has a spring constant of 18 N/m and the jumper has a mass of 113 kg, he streched 6.27 m.
What is Zero velocity?The zero-velocity surface is a concept that relates to the N-body problem of gravity. It represents a surface a body of given energy cannot cross, since it would have zero velocity on the surface.
It was first introduced by George William Hill. The zero-velocity surface is particularly significant when working with weak gravitational interactions among orbiting bodies.
For the purpose of locating Lagrange points, the zero-velocity surface is another crucial factor. In the rotating coordinate system, these points correspond to places where the apparent potential is extreme.
Therefore, A bungee jumper hangs from a bungee cord with zero velocity. If the bungee cord has a spring constant of 18 N/m and the jumper has a mass of 113 kg, he streched 6.27 m.
To learn more about zero velocity, refer to the link:
https://brainly.com/question/18634403
#SPJ2
HELP ASAP!! WILL TRY TO GIVE BRAINLIEST
How are ribosomes different from other complex animal cell organelles?
If an organism had the following organelles: mitochondria, chloroplast, ribosome, nucleus, cell wall, and cell membrane, what type of organism is the cell found
A. Plant and Animal
B. Only Animal
C. Animal & Fungi
D. Only plants
Answer:
D
Explanation:
look at the picture and help me please!! WHAT ARE THOSE 4 QUESTIONS!!!???
Answer:
a, b, a, c, that should be the order from top to bottom
Given an objects momentum and velocity which equation can be used to calculate the objects mass
What ocean features occur along areas of volcanic activity in the ocean floor and release high pressure, extremely hot water and chemicals?
Trenches
Mid-ocean ridges
Hydrothermal vents
Continental shelfs
Answer:
Hydrothermal vents
Explanation:
A hydrothermal vent is found along with areas of volcanic activity in the ocean floor which discharges geothermally heated water. Tectonic plates in such areas move apart at spreading centers and hotspots to form hydrothermal vent.
A hydrothermal vent ejects hot and often toxic, fluids and gases into the surrounding seawater when seawater meets magma.
Hence, the correct answer is "Hydrothermal vents".
A bike is traveling at a speed of 15 m/s. The mass of the bike is 30 kg. What is the kinetic
energy of the bike?
Answer:
3375 JExplanation:
The kinetic energy of an object can be found by using the formula
[tex]k = \frac{1}{2} m {v}^{2} \\ [/tex]
m is the mass
v is the velocity
From the question we have
[tex]k = \frac{1}{2} \times 30 \times {15}^{2} \\ = 15 \times {15}^{2} \\ = {15}^{3} \: \: \: \: \: \: \: \: \: \: [/tex]
We have the final answer as
3375 JHope this helps you
a ball is dropped from a height of 13.3 m. how long will it take for the ball to hit the ground?
Answer:
i dont know the actual answer but i can tell you that it takes 4 seconds for a ball to hit the ground .
Explanation:
Marcie weighs 98 lbs. What is her mass?
Answer:
44.492 kg
Explanation:
Convert pounds to kilograms.
1 lb = 0.454 kg
98 lb * 0.454 kg =44.492 kg
Answer:
what he said above is correct yes
Explanation:
How is the earth a cracked hard boiled egg
When play stops in the game of hockey, to restart the action what is that called? (Hint: there are several points on the rink)
Answer:
Face - off
Explanation:
Face - off is a term used in ice hockey to start periods of play and also to restart the play/action after a previous stoppage.
This face - off involves two opposing players from the 2 opposing teams standing opposite each other at an approximate distance of one sticks blade with the game official dropping the puck between them. Thereafter, two players will then to try to gain possession of the puck.