Answer:
gravitational force and the air friction
Explanation:
when there is air drag, the forces acting on the projectile are the gravitational force and air friction.
Two point charges, 3.4 μC and -2.0 μC , are placed 5.0 cm apart on the x axis. Assume that the negative charge is at the origin, and the positive x-axis is directed from the negative charge to the positive. At what points along the x axis is the potential zero? Let V=0 at r=∞ .
The electric field is zero at x = -16.45cm
Data;
q1 = 3.4 μC q2 = -2.0 μC distance = 5cmThe Electric Field at point 0As the 3μC is larger than -2.0μC and the charges are opposite sign. The electric field will be zero at the negative axis.
Let the point be at x.
For an electric field to be equal to zero;
[tex]k(\frac{q_1}{d_1})^2 + k(\frac{q_2}{d_2})^2 = 0\\\frac{3.4}{(5-x)^2} - \frac{2}{x^2} = 0\\[/tex]
Let's solve for x using mathematical methods.
[tex]\frac{3.4x^2 - 2(5-x)^2}{(5-x)^2x^2}= 0\\ 3.4x^2 - 2(5-x^2) = 0\\3.4x^2 - 50 - 2x^2 + 20x = 0\\1.4x^2 +20x - 50 = 0[/tex]
Solving the above quadratic equation;
[tex]x = -16.45cm[/tex]
The electric field is zero at x = -16.45cm
Learn more on electric field at a point here;
https://brainly.com/question/1592046
https://brainly.com/question/14372859
An object has a mass of 785g and a volume of 15cm cubed. What is its density
Answer:
52.33 repeating
Explanation:
Density is equal to the Mass of an object divided by its Volume. or p = m/V
which issue was not a problem that had to be overcome for humans to travel into space
A.High levels of radiation
B.Extreme hot and cold temperatures
C.Lack of government support
D.Lack of oxygen
Lack of government support is not a problem faced by humans to travel to space.
What is Space travel?Space exploration or travel refers to employing the use of astronomy and space technology by humans to travel outer space. This is carried out by astronomers using uncrewed robotic space probes and human spaceflight.
Therefore,lack of government support is not a problem faced by humans while traveling to space because it does not require government support and outer space have harsh weather's which are not conducive to humans living on Earth, there is also high level of radiations,emissions of dangerous rays because of it's closeness to sun and also lack of oxygen which can be as a result of non existence of plants that release oxygen during photosynthesis.
Learn more about Space travel from the link below.
https://brainly.com/question/1344685
6 J of work is needed to stretch a spring from 10 cm to 12 cm and another 10 J is needed to stretch it from 12 cm to 14 cm, what is the natural length of the spring (in centimeters)
Answer:
9.8 cm
Explanation:
x = natural length
k*[(12 - x)² - (10 - x)²]/2 = 6 (1)
k*[(14 - x)² - (12 - x)²]/2 = 6 + 10 (2)
(1): k(144 + x² - 24x - 100 - x² + 20x) = 12
k(44 - 4x) = 12,
divide by 4, k(11 - x) = 3, k = 3/(11 - x)
(2): k(196 + x² - 28x - 144 - x² + 24x) = 32
k(52 - 4x) = 32
divide by 4, k(13 - x) = 8
3/(11 - x) * (13 - x) = 8
3(13 - x) = 8(11 - x)
39 - 3x = 88 - 8x
5x = 49
x = 9.8 cm
If the voltage in a circuit is 12V and is connected to a single 3Ohm resistor, what is the current flowing through the circuit?
Answer:
12/30
Explanation:
v=ir
i=v/r
12/30=i
Which property describes the rate at which waves pass by?
O A. Wavelength
B. Speed
O c. Period
C.
O D. Frequency
Option D is correct. Frequency is the property describes the rate at which waves pass by.
What is wave frequency?Wave frequency is the number of waves that travel through a specified location in a given amount of time.
The distance between two successive troughs or crests is known as the wavelength. The peak of the wave is the highest point, while the trough is the lowest.
Frequency is the property describes the rate at which waves pass by.
Hence,frequency is the right answer.
To learn more about the wave frequency, refer to the link;
https://brainly.com/question/14316711
#SPJ2
When work is done by the force of gravity, the path that the object takes isn't important. What matters
is the object's change in height, regardless of the path taken to get there. We have already discussed
that when there is a net force on an object, it's kinetic energy changes. We can see that in the
previous example of the brick falling towards the Earth over a distance h. As it falls the net force on it
is F,-mg, and it gains kinetic energy as it falls. Let's consider what must happen before the brick
falls. If the brick starts on the ground, let's assume that someone has to lift it up a distance h before it
falls.
10) If you lift a brick (mass m) up a distance h, what is the minimum force you need to apply to the
brick to lift it up?
11) If you apply that much force to the brick, how much work does your force do on the brick over the
distance h?
12) While lifting the brick, what is the net force acting on the brick?
13) While you are lifting up the brick, the net force on it is zero. Therefore, the net work done on the
brick is zero, and its kinetic energy remains the same. However, your force is still doing work on
the brick. If it's not causing a gain of kinetic energy then what is that work doing?
Answer:
Explanation:
10) mg
11) mgh
12) 0
13) Increasing potential energy
How much force is needed to stretch a spring 1.2m if the spring constant is 8.5 N/m?
Explanation:
spring constant k::8.5
and displacement x::1.2
f:? f: k×x
8.5×1.2:10.2N
You are working in the field to assess the stability of various slopes in the area of a new housing development. You conclude that the ratio of resisting forces to driving forces is 0.73 in an area where many houses are slated to be built. What do you recommend to the builder
The stability of the slope to vehicles moving on it is high, thus the builder can use materials that improves or maintains the given stability of the slope so that vehicles won't skid on the slope.
Stability of the slopeThe stability of the slopes comes with the availability of the static frictional forces.
Ff/F = 0.73
where;
Ff is the frictional forceF is the driving forceThe stability of the slope to vehicles moving on it is high, thus the builder can use materials that improves or maintains the given stability of the slope so that vehicles won't skid on the slope.
Learn more about effect of frictional force on slopes here: https://brainly.com/question/13203839
The slope's stability to vehicles traveling on it is high, thus the builder can employ materials that strengthen or preserve the slope's provided stability so that cars do not slide on the slope.
What is the friction force?It is a type of opposition force acting on the surface of the body that tries to oppose the motion of the body. its unit is Newton (N). Mathematically it is defined as the product of the coefficient of friction and normal reaction.
On resolving the given force and acceleration in the different components and balancing the equation gets.Components in the x-direction.
The given data in the problem is
the ratio of resisting forces to driving forces is 0.73
f is the resisting force
F is the driving force
[tex]\rm \frac{f}{F} = 0.73[/tex]
The slope's stability to vehicles traveling on it is high.
Hence the builder can employ materials that strengthen or preserve the slope's provided stability so that cars do not slide on the slope.
To know more about friction force refer to the link;
https://brainly.com/question/1714663
the ball is accelerating at a rate of 10 m/s squared. the balls mass if 5 kg. what is the net force on the ball? help me men plez
Answer:
50N
Explanation:
[tex]F=ma\\F=(5kg)*(10m/s^{2})\\F=50N[/tex]
A wire loop having area 0.606 m2 is placed in a uniform magnetic field with the normal vector of the loop at a 75.1 degree angle to the field. The field has an initial magnitude of 2.91 Tesla and then is increased at a constant rate to 7.97 Tesla in 0.856 seconds. If a current of 0.0980 Amps is measured to flow through the wire during this time, what must the resistance of the wire be in Ohms
The resistance of the wire is is 36.55 ohms.
Induced emf of the coilThe induced emf in the loop is calculated by Faraday's law as follows;
emf = A(B₂- B₁)/t
emf = 0.606 (7.97 - 2.91)/0.856
emf = 3.58 V
Resistance of the wireThe resistance of the wire is calculated by using Ohms law as follows;
emf = IR
R = emf/I
R = 3.58/0.098
R = 36.55 ohms
Learn more about induced emf here: https://brainly.com/question/13744192
A raised object has energy in its __________ __________ energy stores. What two words complete the sentence?
The complete statement is -
"A raised object has energy in its gravitational potential energy".
What is gravitational potential energy? Gravitational energy or gravitational potential energy is the potential energy a massive object has in relation to another massive object due to gravity. It is the potential energy associated with the gravitational field, which is released (converted into kinetic energy) when the objects fall towards each other. Gravitational potential energy increases when two objects are brought further apart.For two pairwise interacting point particles, the gravitational potential energy {U} is given by -[tex]${\displaystyle U=-{\frac {GMm}{R}}}[/tex]
Close to the Earth's surface, the gravitational field is approximately constant, and the gravitational potential energy of an object reduces to -U = mgh
The force between a point mass {M} and another point mass {m} is given by Newton's law of gravitation -[tex]${\displaystyle F={\frac {GMm}{r^{2}}}}[/tex]
To get the total work done by an external force to bring point mass
{m} from infinity to the final distance {R} (for example the radius of
Earth) of the two mass points, the force is integrated with respect to
displacement -
[tex]${\displaystyle W=\int _{\infty }^{R}{\frac {GMm}{r^{2}}}dr=-\left.{\frac {GMm}{r}}\right|_{\infty }^{R}}[/tex]
[tex]${\displaystyle U=-{\frac {GMm}{R}}}[/tex]
Given is the statement as -
"A raised object has energy in its __________ __________ energy"
An object that is raised above the surface of earth {near to earth surface} than it has gravitational potential energy.
Therefore, the complete statement is -
"A raised object has energy in its gravitational potential energy".
To solve more questions on energy conservation, visit the link below-
brainly.com/question/1041084
#SPJ6
help pls someone quick
Answer:
Correct
Explanation:
The logs and the slope helped the men to lift the nearby stone.
What is the relationship between frequency, wave length, and speed of a wave?
Answer:
Wave speed is the distance a wave travels in a given amount of time, such as the number of meters it travels per second. Wave speed is related to wavelength and wave frequency by the equation: Speed = Wavelength x Frequency. This equation can be used to calculate wave speed when wavelength and frequency are known.
Answer:
v = νλ
Explanation:
Let these be the denoted symbols for the values :-
Frequency = ν
Wavelength = λ
Speed = v
=> Then the relation is :
=> v = νλ
In the simulation, there are three balls on the floor. Drag each of them up off the floor, and then let go. See what happens to the balls. In what way do the balls behave the same? In what way do they behave differently?
Answer:
I hope this helps and I'm not to late
A way the balls behave the same way is by bouncing about 1 time after throwing the balls up. A way the balls act differently is the blue ball is bouncier than all the balls, the red ball bounces about 2 times before stopping, and the green ball doesn’t really bounce except for one time.
Explanation:
you also can use paraphrase to help you reword bye bye!!
My Answer:
Starting with how they acted the same. All three balls fell at the same rate since they are of the same mass; gravity has equal force on all three. Next to the differences, all three balls bounce differently. The blue ball had an average of four bounces before it stopped. The red ball bounced twice before stopping, and lastly, the green ball didn't bounce.
My Explanation:
This is how I answered the question, and I'm on edmentem aswell.
A container of an ideal gas at 1 atm is compressed to 1/3 its volume, with the temperature held constant, what is its final pressure?
Answer:
0.013atm
Explanation:
every gas contains 22.4 GameCube at atmospheric pressure
A container of an ideal gas at 1 atm is compressed to 1/3 its volume, with the temperature held constant, then its final pressure would be 3 atm
What is an ideal gas?It is an imaginary gas for which the volume occupies by it is negligible, this gas does not exist in a practical situation and the concept of an ideal gas is only the theoretical one, the real gases approach the behaviors of an ideal gas at a very high temperature and very low pressure.
As given in the problem A container of an ideal gas at 1 atm is compressed to 1/3 its volume, with the temperature held constant
By using the Boyle's law equation for the given problem
P₁V₁=P₂V₂
By substituting the values in the above equation
P₁ = 1 atmospheric pressure
V₁= V
P₂ =?
V₂= V/3
1×V=P₂×V/3
P₂ = 3V/V
P₂ = 3 atm
Thus, then its final pressure would be 3 atm
Learn more about ideal gas from here
brainly.com/question/8711877
#SPJ2
You push a box out of a carpeted room and along a hallway with a waxed linoleum floor. While pushing the crate 3 m out of the room you exert a force of 28 N; while pushing it 4 m along the hallway you exert a force of 14 N. To bring it to a stop you exert a force of 5 N through a distance of 1.2 m, opposite to the motion. How much work do you do in all
The total work done is equal to 134 J.
Work
The work formula is characterized as the multiplication of the force performed and the distance in which the movement was performed, so that:
[tex]W = F \times d[/tex]
Thus, it is enough to calculate the value of the work in each movement and add to find the total work, so that:
[tex]W_1 = 3 \times 28 = 84J\\W_2= 4 \times 14 = 56J\\W_3 = (-1.2) \times 5 = 6J[/tex]
[tex]84 + 56 + (-6) = 134J[/tex]
So, the total work done is equal to 134 J.
Learn mor about work in: brainly.com/question/4095205
When light traveling in straight lines passes through an object that is curved like a lens, the light is ________ at different angles.
Answer:
You are right. It is reflected
Explanation:
if it is concave then the light is reflected at one direction.
if it is convex the light is reflected outwards and they will travel away from the focal point and the light scatters or will be reflected to different directions
When light traveling in straight lines passes through an object that is curved like a lens, the light is refracted at different angles. Thus, the correct option is B.
What is refraction of light?Refraction is the phenomena of bending of light, it also happens with sound, water and other waves as it passes from one transparent substance into another substance. This bending of light by refraction makes it possible for us to have lenses, such as magnifying glasses, prisms, and rainbows.
When a ray of light travels in straight line, it passes through an object that is curved like a lens, the light is refracted at various different angles, depending upon the angle of incidence of light on the lens.
Therefore, the correct option is B.
Learn more about Light refraction here:
https://brainly.com/question/23750645
#SPJ2
How does the law of conservation apply to Earth's Energy Budget?
Answer:
The balance between incoming energy from the sun and outgoing energy from Earth ultimately drives our climate. This energy balance is governed by the first law of thermodynamics, also known as the law of conservation of energy.
A wheel is turning at 55 rad/s, and is slowing due to friction at a rate of -1.7 rad/s?. How long will the
wheel turn before coming to rest?(in seconds) How far will the wheel turn before coming to rest?( in
radians)
Answer:
32.4 s, 890 rad
Explanation:
ω₀ = 55 rad/s, α = -1.7 rad/s², ω = 0
α = (ω - ω₀)/t, so
t = -ω₀/α = -55/(-1.7) = 32.4 s
Δθ = ω₀t + αt²/2 = 55*32.4 + (-1.7)*32.4²/2 = 890 rad
Essay on Outdoor skills
Answer and Explanation:
I can't write the essay for you, but I can give you useful tips on what information should be in your essay.
____________________________________
Outdoor skills basically have a similar concept to street smarts. With street smarts, you are knowledgeable in what to do on the streets, how to act, what signs and signals to look out for, and other things like that. With outside smarts, it's the same way. Except, I would say that it is a little less social.
Outside smarts could be something like camping, and surviving in general in the wild, such as:
- Creating a tent or shelter for yourself to sleep in.
- Finding food and knowing whether it is acceptable and safe to eat.
- Making sure that you are in a safe area that is okay for you to camp out in.
- Making sure that you have some sort of protection, whether that would be with a weapon, a tool, or something else.
- Making sure that you have safe water to drink that you brought with you.
- A back-up plan in case there is a reason that you need to leave.
- A first aid kit in case of injury.
- How to create a fire and use it safely.
- A way to get back home, with a plan and possibly even a compass.
____________________________________
I hope that this helps.
A superelastic collision is one in which...
A. kinetic energy before the collision equals kinetic energy after the collision.
B. kinetic energy after the collision is zero.
C. kinetic energy before the collision is less than kinetic energy after the collision.
D. kinetic energy before the collision is greater than kinetic energy after the collision.
Answer: ~Y/n here~ Your answer I believe would be:
A. kinetic energy before the collision equals kinetic energy after the collision.
(Hope this helps!)
How many atoms of oxygen in the chemical formula 2 Ca(CIO2)2?
O 2
O 4
O 6
O 8
Answer:
I believe it's 8
Explanation:
Two charged particles with opposite signs but the same magnitude of charge enter a magnetic field that is perpendicular to their direction of motion. How will the motion of the two particles differ when they enter the magnetic field?
Answer:
the two particles will go opposite directions, along clockwise circle and counter-clockwise circle, respectively.
Explanation:
charge = ±q, velocity = v, magnetic field = B
force F = q v x B
opposite q will give opposite force, so the two particles will go opposite directions, along clockwise circle and counter-clockwise circle, respectively.
Calculate: the charge flow in 60 seconds in a wire when the current in the wire is 3.0 A.
Answer:
180 C
Explanation:
t = 60 sec, I = 3.0 A
Q = I*t = 3.0 * 60 = 180 C
relation between linear and cubical expansion?
cubic expansion is 3 times the linear expansion. expressed mathematically as
[tex] \gamma = 3 \alpha [/tex]
A 100 kg block slides down a frictionless ramp which is at an angle of 26.6 ∘ with the horizontal. Find the magnitude of the velocity of the block when it gets to the bottom of the ramp if the length of the incline is 50 meters. V=_____m/s
The block accelerates down the ramp due to the component of its weight that acts parallel to the ramp; this force has magnitude
(100 kg) g sin(26.6°) ≈ 438 N
(Note that the positive sign here means we take "down the ramp" to be the positive direction.)
Since the ramp is frictionless, this is the only force acting on the block in this direction. By Newton's second law, the block's acceleration is a such that
438 N ≈ (100 kg) a ⇒ a ≈ 4.38 m/s²
The block accelerates uniformly, so that it attains a speed v as it moves 50 m such that
v² = 2a (50 m)
Solve for v :
v = √(2a (50 m)) ≈ 20.9 m/s
A box of weight 100 N is at rest on a floor where μs = 0.4. A rope is attached to the box and pulled horizontally with tension T = 30 N. Which way does the box move?
∑F = F-fs
∑F = F - μs.N
∑F = 30 - 0.4 x 100
ΣF = 30 - 40 = -10
the box doesn't move
Due to the fact that the tension of 30 N that is given to the rope is less than the maximum static friction force of 40 N, the box remains in its current position.
We need to make a comparison between the force of static friction and the force that was applied in order to figure out which way the box is going to move. The static friction force (F[tex]_friction[/tex]) works in the opposite direction to the applied force, and it keeps the box from moving so long as the applied force does not exceed the maximum static friction force. This is true provided that the applied force does not exceed the maximum static friction force.
The following equation can be used to derive the greatest static friction force (F[tex]_friction_max[/tex]) that exists between the box and the floor:
F[tex]_friction_max[/tex] = s multiplied by N
where s is the coefficient of static friction and N is the normal force. Because the box is sitting still on the floor, the normal force is equal to the weight of the box, which is 100 N in this example.
F[tex]_friction_max[/tex] equals 0.4 times 100 N, which equals 40 N.
The tension in the rope, measured in newtons (N), is thirty. Due to the fact that T (30 N) is less than the maximum force of static friction (40 N), the box will not be able to overcome the static friction, and it will not move in the direction where the applied force is exerting its force.
Therefore, there is no movement of the box when a strain of 30 N is applied to the rope and it is pulled.
To know more about static friction
https://brainly.com/question/13680415
#SPJ2
A person pushes a box across a horizontal surface at a constant speed of 0.5 meter per second The box has
a mass of 40 kilograms, and the coefficient of sliding friction is 0.25. The power supplied to the box by the
person is
a. 0.2 W
c. 50 W
b. 5W
d. 100 W
Answer:
The correct option
(C) 50W
-
Hope it help's u :))!
A solar system has the five planets shown below. The mass of each planet is proportional to its size. Planet X is at equal distance from Planet A, Planet B, Planet C and Planet D Planet A Planet B Planet X Planet D Planet C O Which planet exerts the greatest gravitational force on Planet X? Planet A Planet B Planet C Planet D
Please help me i will mark Brainlast
Answer:
Explanation:
The gravitational force is equal to the equation [tex]\frac{Gm_{x} m_{p} }{r^{2} }[/tex]
r: distance between the planet and planet xm[tex]_{x}[/tex] : mass of planet x[tex]m_{p}[/tex]: mass of any planetSince we know that the distance between the planets to planet x is equal, thus the value 'r' is of no use to use to increase the gravitational force.
The only way to increase gravitational force is by increasing the mass of the planet. Thus planet C which has the greatest mass has the greatest gravitational force
Hope that helps!
