What is the equivalent resistance of the following combination circuit? A 5.00 Ω resistance placed in series with a parallel combination of 9.00 Ω and 6.00 Ω ?

What Is The Equivalent Resistance Of The Following Combination Circuit? A 5.00 Resistance Placed In Series

Answers

Answer 1

The equivalent resistance of the circuit is 8.6 Ω.

What is resistance?

Resistance can be defined as the opposition to current flow in an electric circuit. The S.I unit of resistance is ohms.

To calculate the equivalent resistance, we use the formula below.

Formula:

R' = R₁+(R₂//R₃)................ Equation 1

Where:

R' = Equivalent resistance of the circuit.

From the diagram,

Given:

R₁ = 5 .00 ΩR₂ = 9.00 ΩR₃ = 6.00 Ω

Substitute these values into equation 1

R' = 5+(9//6)R' = 5+[(9×6)/(9+6)]R' = 5+[54/15]R' = 5+3.6R' = 8.6 Ω

Hence, The equivalent resistance of the circuit is 8.6 Ω
Learn more about equivalent resistance here: https://brainly.com/question/12856032


Related Questions

Gravity is a force that opposes motion. true or false?

Answers

Answer:

true,because when the gravity of an object is changed the motion of the object changes

Suppose that Salim hits a 100 g fastball moving towards him at a speed of 42 m/s with his bat as shown in the image.the impulse of the fastball is 8 kg.m/s in the antiparallel direction of the initial velocity. Then the final momentum of the fastball is --------------( Suppose that the direction of the fastball toward the bat is negative and away from the bat is positive)

1.8 kg m/s
0.6 kg m/s
3.8 kg m/s
2.4 kg m/s

Answers

The final momentum of the ball is 3.8 kgm/s.

Change in momentum of the ball

The impulse received by the ball is equal to change in momentum of the ball.

J = ΔP

where;

J is the impulseΔP is change in momentum

ΔP = P₂ - P₁

P₂ = ΔP + P₁

Final momentum of the ball

The final momentum of the ball is calculated as follows;

P₂ = 8 + (- 0.1 x 42)

P₂ = 8 - 4.2

P₂ = 3.8 kgm/s

Learn more about change in momentum here: https://brainly.com/question/7538238

Brainliest if correct

Answers

Answer:

It's is c coz the weight is equal to the normal force

A rectangular box has side 10cm x 5cm x 2cm. If it lies on a horizontal surface and has weight 1.00N, calculate the maximum and Minimum pressure it exerts on the Surface

Answers

Answer:

P max = 1000 pa

P min = 200 pa

Explanation:

P = F/A

pressure will be maximum when surface gets minimum. so to find the maximum amount of pressure we need to calculate the minimum surface. it is 2cm×5cm = 10cm² = 0.001m² . then we have:

P = 1 / 0.001 = 1000 pa

to find minimum pressure the surface that must be chosen is 10cm×5cm = 50cm² = 0.005m² .

P = 1 / 0.005 = 200 pa

A bridge that was 5m long has been washed out by a heavy rain. The road on the
far side of the stream is 2m lower that the road the car starts on. How fast must
the car be going to successfully jump the stream?

Answers

hello so first of all you put 2m in the and you timesand then i’ve got your answer

As observed from Earth, the Sun has an angular size of about 0.53o. From the observation, estimate the diameter of the Sun. How large in volume is the Sun when compared to Earth?

Answers

Formula
Angular Diameter = 206265 * (Actual
diameter / Distance)
Angular Dia * Distance = 206265 X Actual
dia
(Angular Dia * Dist.) / 206265 = Actual
diameter.
Given Data Angular diameter = 0.5 degrees
we know that sun is approximately 1AU
away
Distance = 93,000,000 miles
Angular size = 0.5 degrees X (60 min / deg)
X (60 sec / min)
Angular size = 1800 seconds of arc
Act. Diameter = (1800 X 93,000,000) /
206265
Act.diameter = 810,000 miles = 1,300,000
km
Assume sun as sphere
Volume of sun = 1.15*10 ^18 km?
We know that Volume of earth = 1.08 *
10 ^12 km3
Dividing vol. Of sun by earth
Volume difference is sun is 1.3 million times
bigger than earth. That's 1.3 million earth
could fit inside sun

A 4-lb collar can slide without friction along a horizontal rod and is in equilibrium at A when it is pushed 1 in. to the right and released from rest. The springs are undeformed when the collar is at A and the constant of each spring is 2800 lb/in. Determine the maximum velocity of the collar.

Answers

The maximum velocity of the collar is 0.335 m/s.

Maximum velocity of simple harmonic motion

The maximum velocity of a simple harmonic motion occurs when the object is in equilibrium position.

K.E = U

¹/₂mv² = ¹/₂kx²

mv² = kx²

where;

k is spring constant = 2800 lb/in = 316.36 N/mx is extension = 1 in = 0.0254 mm is mass = 4 lb = 1.81 kg

[tex]v = \sqrt{\frac{kx^2}{m} } \\\\v = \sqrt{\frac{316.36 \times 0.0254^2}{1.81} }\\\\v = 0.335 \ m/s[/tex]

Thus, the maximum velocity of the collar is 0.335 m/s.

Learn more about maximum velocity of SHM here: https://brainly.com/question/20595261

With what minimum speed must athlete leave the ground in order to lift his center of mass 2.00 m and cross the bar with a speed of 0.95 m/s

Answers

The athlete must leave the ground with a speed of 6.33m/s.

Kinect and potential energy

To calculate the initial speed, with the information of height and final speed, we can use the following expression that uses the kinetic energy and potential energy:

                               [tex]mgh_1 + \frac{1}{2}mv_1^{2}= mgh_2 + \frac{1}{2}mv_2^{2}[/tex]    

Applying the values ​​given by the statement we have:

                           [tex]9.81\times 0 + \frac{1}{2}v_1^{2} = 9.81 \times 2 + \frac{1}{2}(0.95)^{2}[/tex]      

                                             [tex]v_1 = 6.33m/s[/tex]

So, the athlete must leave the ground with a speed of 6.33m/s.

Learn more about kinect and potential energy in: brainly.com/question/14509624

A sphere of mass M 5 1.00 kg is supported by a string that passes over a pulley at the end of a horizontal rod of length L 5 0.300 m (Fig. P17.15). The string makes an angle u 5 35.08 with the rod. The fundamental frequency of standing waves in the portion of the string above the rod is f 5 60.0 Hz. Find the mass of the portion of the string above the rod.

Answers

A fundamental frequency of 60 Hz, attached mass of 1 kg., rod length of

0.3 m gives the mass of the part of the string as 3.245 × 10⁻³ kg.

Response:

The mass of the string, m ≈ 3.245 × 10⁻³ kg

How can the mass of the part of the string be calculated?

The given parameters are;

Mass of the sphere, M = 1.00 kg

Length of the rod, L = 0.300 m

Angle the string makes with the rod, θ = 35°

The fundamental frequency of the standing wave in the portion of the

string above the rod, f₁ = 60.0 Hz

Required;

The mass of the portion of the string above the rod

Solution:

The fundamental frequency in a string is given as follows;

[tex]f_1 = \mathbf{\dfrac{\sqrt{\dfrac{T}{m/l} } }{2 \cdot l}}[/tex]

Where;

T = The tension in the string

m = The mass of the string

l = The length of the string

[tex]The \ tension \ in \ the \ string, \ T= \mathbf{\dfrac{M \cdot g}{sin(\theta)}}[/tex]

Which gives;

[tex]T= \mathbf{\dfrac{1 \times 9.81}{sin(35)}} \approx 17.1[/tex]

The tension in the string, T ≈ 17.1 N

[tex]The \ length \ of \ the \ string, \ l=\mathbf{\dfrac{L}{cos(\theta)}}[/tex]

Therefore;

[tex]l=\dfrac{0.300}{cos \left(35^{\circ} \right)} \approx 0.366[/tex]

Therefore;

[tex]60.0 = \mathbf{\dfrac{\sqrt{\dfrac{17.1}{m/0.366} } }{2 \times 0.366}}[/tex]

Which gives;

[tex]m = \dfrac{17.1}{(60.0 \times 2 \times 0.366)^2} \times 0.366 \approx 3.245 \times 10^{-3}[/tex]

The mass of the string, m ≈ 3.245 × 10⁻³ kg

Learn more about the fundamental frequency of an material here:

https://brainly.com/question/3776467

Perform an experiment in which you flip a switch 2,300,000 times. Write this
number in scientific notation.
O A. 23 x 10-6
O B. 2.3 x 106
O C. 0.23 x 105
O D. 0.23 x 106

Answers

Answer:

B. 2.3 x 10⁶

Explanation:

To calculate scientific notation for the number 2,300,000, we have to follow this notation

a × 10^b

Step 1 :

To find a we have to write the non-zero digits placing a decimal after the first non-zero digit.

2,300,000 to 2.300000

Step 2 :

Now, to find b count how many numbers of digits are there to the right of the decimal.

2.300000

Hence, there are 6 digits to the right of the decimal.

Step 3 :

Since, we had found the value of a and b, we can now reconstruct the number into scientific notation.

a = 2.3

b = 6

2.3 × 10

Therefore, option b is correct.

What problem did the crew of Biosphere 2 face?
A virus from one of the animals
A loss of oxygen
One of the crew members developed cancer
The crew ran out of food.

Answers

Answer: A loss of oxygen

Explanation: There wasn’t enough reliable oxygen for the researchers to inhale

Can someone please answer this? I am really lost.

Answers

Answer:

8.0 rad/s

Explanation:

I₁ = 1.0 kgm², ω₁ = -20.0 rad/s (clockwise is positive direction)

I₂ = 4.0 kgm², ω₂ = 15.0 rad/s

Angular momentum conservation:

I₁ω₁ + I₂ω₂ = (I₁ + I₂)ω

1.0 x (-20.0) + 4.0 * 15.0 = (1.0 + 4.0)ω

40.0 = 5.0ω

so ω = 8.0 rad/s

You're collecting data in BeyondLabz for an object in free fall, subject to air resistance. How do you know when you've collected enough data points for a single run

Answers

Enough data points would have been collected when specific data for upward and downward motion are collected.

What is a Data point?

A data point is a discrete unit of information. This information is always unique.

Free fall

An object subjected to free fall is under the influence of gravity. An object subjected has different time of motion for upward and downward motion.

Thus, we can conclude that enough data points would have been collected when specific data for upward and downward motion are collected.

Learn more about free fall here: https://brainly.com/question/10909077

state some important uses of magnet​

Answers

Magnets are used in magnetic compass, doorbells, refrigerators. Magnets are used in dynamos, motors, loudspeakers, microphones etc. Ceramic magnets are used in computers. Magnets are used in toys to give a magic effect.

How much work is needed to lift a 50kg weight 3.0m ?

Answers

**Answer** 1471.5 Joules of work

Explanation- you can do force x distance

Force= 50kg * 9.81N gravitational

Distance= 3m

True or false: charge can be created or destroyed

Answers

Answer:

False

Explanation:

Charges only be transferred from one system to another. Materials that permit electrons to move freely through them, such as most metals

khanacademy

Enumerate some things you can do to make work easier and faster when working with simple machines. (2 answer)​

Answers

Answer:

by increasing the distance through which force is applied, by multiplying force of speed to the energy applied

The first user who answer is correct :)

Two students side in carts opposite to one another in a spinning Ferris wheel as shown.
Student A is originally at the bottom of the Ferris wheel while student B is at the top of the Ferris wheel. As the wheel turns, student B comes to the bottom white student A arrives at the top, as shown. The Ferris wheel spins at a constant speed so the two students are traveling with constant speed. Students A and B have masses ma and mb, respectively. The Ferris wheel has a radius R. What is the magnitude of the TOTAL work done on student A in moving from the bottom to the top of the Ferris wheel? The total work is the sum of the work done by all the forces on the body; i.e. Wtotal = sum(Fd). Neglect air resistance.
Also, what is the sign of the work done on student B by the Ferris wheel in moving from the top to the bottom?

Answers

Net work done  on student B by the Ferris wheel in moving from the top to the bottom  is mathematically given as

net work done on A =0.

Net work done  

Generally the equation for the work energy theorem is mathematically given as

net work done on A = change in kinetic energy of A.

Where, angular velocity is constant.

change in kinetic energy = 0.

Hence, from work energy theorem,

net work done on A =0.

For more information on work

https://brainly.com/question/756198

if two temperatures differ by 25 degrees on Celsius scale, the difference of temperature on Fahrenheit scale is?


Answers

Answer:

25 x 9/5 = 45 degrees Fahrenheit

Explanation:

The rear wheel of a 150 kg tricycle accidentally ran over a nail. The circular tip of the nail has a diameter of 0.001 m. How much pressure did the wheel of the tricycle experience assuming that the entire weight of the tricycle is concentrated on the rear wheel that ran over the nail.

Answers

The pressure experienced by the wheel of the tricycle is 1.85×10¹⁰ N/m²

What is pressure?

Pressure can be defined as the force acting perpendicular per unit area on the surface of a body. The S.I unit of pressure is N/m²

To calculate the pressure of the wheel of the tricycle, we use the formula below

Formula:

P = 4mg/πd².............. Equation 1

Where:

P = Pressure of the tricycle wheelm = mass of the wheeld = diameter of the wheelg = acceleration due to gravityπ = pie.

From the question,

Given:

m = 150 kgd = 0.001 mg = 9.8 m/s²π = 3.14

Substitute these values into equation 1

P = 4(150)(9.8)/(0.001²×3.14)P = 5880/0.00000314P = 1.85×10¹⁰ N/m²

Hence, The pressure experienced by the wheel of the tricycle is 1.85×10¹⁰ N/m².
Learn more about pressure here: https://brainly.com/question/25736513

Select the correct answer.
While Jordan was playing with her favorite doll, one of its legs fell off. Now she wants to take the doll to visit the doctor. What does Jordan's
thought process demonstrate?
O A. logic
OB. animism
O C. classification
OD. conservation

Answers

A. logic, would be your answer i believe!

Directions: Read the following excerpts carefully, then identify whether they employ informative, persuasive, or argumentative writing technique.

ENGLISH Subject:

I am really confused, might anyone know?

Answers

Hi there!

Informative writing has the intent to inform or educate us on a particular topic or event. It gives us more information and insight onto something.

Persuasive writing has the intent of convincing us to believe in a certain idea or to perform a certain action. For instance, advertisements have a persuasive intent; they are persuading us to buy a product or service.

Argumentative writing is similar to persuasive writing in the sense that they are persuading us to believe a certain idea. However, they are often based on logic and fact rather than opinions.

Let's look at the first excerpt.

This morning at 9 a.m., a school bus collided with a car at the intersection of Osmena and Cabrera streets. The passengers were not injured, but the medical personnel checked each student as well as the driver before they were transported to their school.

This text doesn't try to convince us in believing something. It doesn't argue anything and it only tries to give us more insight onto the event, which is a car accident. No opinions are stated and only events are given.

Therefore, this excerpt uses an informative writing technique.

Answer:

1. Informative
2. Persuasive
3. Informative
4. Persuasive
5. Argumentative

Explanation:

Informative is a way to inform the audience on a particular topic throughout the reading. Common examples of an informative paragraph would be to inform people on different situations around the world or a news outlet some would say.

Persuasive is a way to convince one to change/commit an act of sorts. Through persuasion you can convince your audience to look at a situation from a different perspective and perhaps convince the person to be more willing to do change the way they do something else. Common example of a persuasive paragraph would be trying to persuade someone to use less water through telling them the importance of water conservation and how water is a nonrenewable source.

Argumentative somewhat similar to persuasive but is more assertive you are trying to convince the audience why the side you're apart of is more better then the opposite side through a means of ethos, pathos, and logos. Common example of a argumentative paragraph would be something like why pizza is better then hamburgers.

Now that we know this information it's time to answer:

Excerpt one:
Excerpt one is known "informative excerpt" because we are informing the readers about how a school bus collided with a car nearby, and how thankfully none of the passengers were injured.

Excerpt two:
Excerpt two would be known as a "persuasive writing." We aren't trying to convince the audience on our side of donating blood so this won't be an argumentative writing, we are trying to persuade them by saying the benefits of how donating blood can save a person's life.

Excerpt three:
Excerpt three would be known as an "informative writing." We aren't trying to persuade or convince we are trying to inform the audience of the dangers of drinking while in high school by listing all the negative effects drinking has on a highschooler like unsafe encounters.

Excerpt four:
Excerpt four would be known as an "persuasive writing." This writing is trying to convince the reader about how the death penalty is a good punishment for criminals because the bible says an eye for an eye and how we should keep it on the books.

Excerpt five:
The final excerpt will be known as an "argumentative writing." This writing is again assertive, and it lists both sides of the spectrum how parents won't let their children study abroad because of how expensive it costs for things like tuition, food, shelter along with other necessities. It even goes as far as stating it's own position by saying how it's expensive to study abroad.

Hope this helps.

If the frequency increased, how would the change impact the wave speed and wavelength?

Answers

Answer:

The frequency and wavelength of a wave are related. When frequency increases more wave crests pass a fixed point each second. That means the wavelength shortens. So, as frequency increases, wavelength decreases.

Explanation:

Answer: The waves travel at the same speed, but the observed frequency depends on any relative motion between the observer and source. When the observed frequency changes, so does the wavelength. If the observer and source are moving toward each other, then the frequency increases and the wavelength decreases.

Explanation: I hope this helped you understand

A battery is charging. Electric current enters the battery through the ______ terminal, at a ______ potential than when it exits the battery

Answers

Electric current enters the battery through the negative terminal, at a  high potential than when it exits the battery.

What is Potential difference?

This is the amount of work needed to move a unit charge from a reference point to a specific point against an electric field.

In a battery, electric current moves from negative to the positive terminal with the positive terminal having a higher potential which is the point where it leaves the battery.

Read  more about Potential difference here https://brainly.com/question/87152

What is the magnitude of the electric field at a point that is 0.5m to the right of a small sphere with a net charge of -6.0x10-6 C?

Answers

Answer:

lil durk a goat

Explanation:

A rotating turntable (rt=4.50 m) is rotating at a constant rate. At the edge of the turntable is a mass (m = 3.00 kg) on the end of a 5.00 m - long string (L). If theta = 40.0o,determine:

Answers

The magnitude of the tension in the string is 9.31 N.

Tension in the string

The magnitude of the tension in the string in the horizontal circle formed by the turn table is calculated as follows;

T = Fcos(θ)

where;

F is centripetal forceθ is inclination of the string

[tex]T = \frac{mv^2}{r} \times cos(\theta)\\\\T = \frac{3 \times 4.5^2}{5} \times cos(40)\\\\T = 9.31 \ N[/tex]

Thus, the magnitude of the tension in the string is 9.31 N.

The complete question is below:

A rotating turntable (rt=4.50 m) is rotating at a constant rate. At the edge of the turntable is a mass (m = 3.00 kg) on the end of a 5.00 m - long string (L). If theta = 40.0o,determine the magnitude of the tension in the string.

Learn more about tension in horizontal circle here: https://brainly.com/question/12803719

5) Two cables support a mass of 100kg. One cable is perfectly horizontal, while the other
makes an angle of 40 degrees above the horizontal. Find the tension in the horizontal
cable.

Answers

T sin θ = M g = W     cable supporting weight

T = 100 * 9.8 / sin 40 = 1525 N

T cos θ = Th horizontal force due to cable

Th = 1525 cos 40 = 1168 N

i know it’s 30 but how ??? what equations did you use and how do you get there ?

Answers

The change in momentum of the object between 0 and 4s is 40 Ns.

What is momentum?

The momentum of an object is determined from the product of mass and velocity of the object.

The change in momentum of an object is equal to the impulse received by the object.

ΔP = J = Ft

where;

ΔP is change in momentumJ is impulseF is forcet is time

The change in momentum of the object between 0 and 4s is calculated as follows;

ΔP = Ft

ΔP = 10 x 4

ΔP = 40 Ns

Learn more about change in  momentum here: https://brainly.com/question/7538238

A half-ring (semicircle) of uniformly distributed charge Q has radius R. What is the electric potential at its center

Answers

The electric potential at the center of the half-ring is [tex]\frac{kQ}{R}[/tex].

Electric force experienced by the charge

The force experienced by the charge is calculated by Coulomb's law;

[tex]F = \frac{kQ^2}{R^2}[/tex]

Electric field strength

The electric field strength is force per unit charge;

[tex]E = \frac{F}{Q} = \frac{kQ}{R^2}[/tex]

What is electric potential?

The electric potential is work done in moving a charge from infinity to a certain point.

V = Ed

[tex]V = \frac{kQ}{R^2} \times R\\\\V = \frac{kQ}{R}[/tex]

Learn more about electric potential here: https://brainly.com/question/24317284

Siobhan wants to measure the mass of a bag of flour. What should she use?

Answers

This depends on how big the bag is. Most commonly, the bag weighs 2 kg to 10 kg or more. With this range of weight, Siobhan should use a balance to measure the mass of the flour and record the mass in kilograms. Thus, the answer is the first choice

Answer:

A weighing scale

Explanation:

A weighing scale graduated in grams or kilograms can be used.

Other Questions
Describe the location of Greek homeland including Macedonia before 334 BCEPlease help. Carbon dating description Quadrilateral JKLM is graphed with vertices at J(-2,2), K(-1,-5), L(4,0), and M(3,7).A) Prove that the diagonals JL and MK have the same midpoint.B) Prove that segments JL and MK are perpendicular. ANYONE PLEASE HELP ME WITH MY ENGLISH HOMEWORK I REALLY NEED THE ANSWER RIGHT NOW I HOPE YALL CAN HELP ME:( Factor Completely: 10x + 15 Someone pls help with number 2, i will choose brainliest! We have all seen those solid colored canvas pieces in the museum. Do you think they qualify as abstract art? Defend your point of view. Given a = 7.6, A = 50 degrees, and b = 4.3, use the Law of Sines to solve for B. Roundyour answer to the nearest degree, and enter the number only. Note: The figure isnot drawn to scale. What year did the Algerian Revolution begin? I give Brainly pls answer correctly A city following the multi-nuclei model would MOST LIKELY be found in Latin America the American Sunbelt Southwest Asia Southern Europe Central Asia complete the calculation so that each shows the correct sum 1.036 +blank =4 4) According to the article, how many athletes over the last ten years have died from the medical conditionknown as heatstroke?A) zero athletesB) ten young athletesC) less than two dozenD) more than two dozen Sumit has created a procedure to draw a boat in Logo and saved it by the name, 'Boat'. Next day, when he tried to type the name 'Boat', the computer displayed the message "I don't know how to Boat". Why has it happened? How does global warming affect solar energy in the atmosphere?(1 point). What is an equation that represents the linearfunction described by the data in Item 5?Please help:(( QUESTION 5Find the error in the problem below. Then give the correct answer.X + 2x 5 = -23x - 5 = -2+5 +53x = 7x= 7/3 The speed of a passenger train that is traveling at an initial speed of 14 feet per second and continues to accelerate can be modeled by the function y = 14t2. A second train that is 1,400 feet ahead of the first train is traveling at a constant speed of 96 feet per second and can be modeled by the function y = 96t + 1400. Solve the system of equations. Which solution represents a viable time that the trains are side by side? Which term best describes the author's tone in paragraph 8?A.soberB.passionateC.flatteringD.mocking find the values of X,Y and Z