Answer:
hydrochloric acid
Explanation:
The compound Mr. Pham's company used is most likely hydrochloric acid.
Hydrochloric acid is a strong acid and it is applied to remove corrosion and rusts from another body.
For industrial purposes, they are used as cleansing agents.The acid is capable of dissolving and breaking down the rust and corrosion.
A base does not have this property and would not effectively remove the corrosion.
Sodium hydroxide and lithium hydroxide are bases.
Nitric acid is not as strong as hydrochloric acid.
Answer:
hydrochloric acid
Explanation:
i just did the test 3 minutes ago.
hope this helps and have a good day.
:)
A man standing on top of a 30 m tall building throws a brick downwards with a velocity of 12 m/s. Determine the speed of the brick just before it hits the ground.
Answer:
27.1m/s
Explanation:
Given parameters:
Height of the building = 30m
Initial velocity = 12m/s
Unknown:
Final velocity = ?
Solution:
We apply one of the kinematics equation to solve this problem:
v² = u² + 2gh
v is the final velocity
u is the initial velocity
g is the acceleration due to gravity
h is the height
v² = 12² + (2 x 9.8 x 30)
v = 27.1m/s
please help me!! will mark brainliest
Sheila lives in the seashore community of Beachview. At 6:00 a.M. One morning, she noticed that the local ocean water was at high tide. At approximately noon that same day, she noticed the water was at low tide.
Answer:
hello your question is incomplete below is the complete question
Sheila lives in the seashore community of Beachview. At 6:00 a.m. one morning, she noticed that the local ocean water was at high tide. At approximately noon that same day, she noticed the water was at low tide.
Which of the following describes what caused the change in tides between 6:00 a.m. and noon that day
options :
A)The Earth revolved approximately 90° around the Sun, and the gravitational attraction between the Moon and Sun increased.
B)The Earth completed one full rotation (360°), and the gravitational attraction between the Moon and the Beachview area increased.
C)The Earth completed one full revolution around the Sun (360°), and the gravitational attraction between the Moon and Sun decreased.
D)The Earth rotated approximately 90°, and the gravitational attraction between the Moon and the Beachview area decreased.
answer :
The Earth rotated approximately 90°, and the gravitational attraction between the Moon and the Beachview area decreased. ( D )
Explanation:
The movement of the Earth in the Galaxy occurs in two ways
namely: Rotation and Revolution and each movement comes has an effect on the earth, also each movement has a time frame as well.
The complete rotation of the earth about its axis takes about 24 hours and this rotation brings about Night and day and it also causes the rise and fall of tides. while the Revolution of the earth round brings about different seasons and it takes about 365 days for a complete revolution of the earth round the sun.
hence the the change in tides between 6:00 a.m. and noon that day is caused by The Earth rotating approximately 90°, and the gravitational attraction between the Moon and the Beachview area decreased.
The distance that the pointer of a galvanometer moves depends on the amount of magnetism in the loops of the armature.
Please select the best answer from the choices provided
T
F
at terminal velocity what will be relationship between drag force and driving force
Answer:
The answer to this question is given below in this explanation section.
Explanation:
"relationship between drag force and driving force"
The velocity at any time during the flight depends on the corresponding acceleration of the vehicle and the balance of forces acting of the vehicle.Forces acceleration and velocity are all vector quantities having both a magnitude and a direction.When describing the motion of an object caused by forces,one must account for both the magnitude and direction.The forces present during coasting flights are the drag and the weight.The weight is constant is magnitude and is always directed toward the center of earth.The magnitude of the drag change the square of the velocity.During ascent the drag is in the same direction as the weight .But during descent the drag opposes the weight.
For the descending rocket the next vertical external force F is equal to the difference between the drag D and the weight W:
F=D-W
The impetus power or energy behind something in motion,as in he was clearly the driving force in the new administration This term transfer the force that sets in motion an engine or vehicle to other enterprises.Gravity is the driving force for an object falling towards the ground.
A skate boarder relies on the ground pushing on the sole of her shoe to drive her skateboard along.
4. An 85 kg object has 2.16 x 10 J of kinetic energy. What is the object's velocity?
Answer:
v = 0.713[m/s]
Explanation:
Kinetic energy is defined as the product of mass by the squared velocity of a body. In this way with the following expression we can have the kinetic energy as a function of velocity.
[tex]E_{kin}=0.5*m*v^{2}[/tex]
where:
m = mass = 85 [kg]
v = velocity [m/s]
Ekin = kinetic energy = 2.16*10 [J]
[tex]2.16*10 = 0.5*85*v^{2}\\v =\sqrt{0.508} \\v= 0.713[m/s][/tex]
What is the density of a box measuring 100 grams and 10 ml?
Answer:
In order to convert density to grams, you have to put the mass on one side of the equation, and the density and the volume on the other. Therefore, d * v = m. Multiply the density by the volume. Using the example in step 1, you would multiply 2 g/mL by 4mL.
Explanation:
ok
SI. unit of resistance ?
Answer:
si unit of resistance is Ohm
What does it mean that photographs are two-dimensional?
A dog starts at position x=2.50m, and undergoes a displacement of 8.25m. What is its final position?
Answer:
Civil law deals with behavior that constitutes an injury to an individual or other private party, such as a corporation. Examples are defamation (including libel and slander), breach of contract, negligence resulting in injury or death, and property damage.
Explanation:
A 150 lb person and a 200 lb person run into each other.
What can you say about force?
Who accelerated the most? Why?
Explanation:
1. Force is something that pushes or pulls you
2. The 150 lbs person accelerated faster because they had less force pushing or pulling them down.
25 POINTS!!!
Copy this concept map, and then use vocabulary terms from the previous page to complete the concept map.
VOCAB
Mechanical wave
Electromagnetic wave
Transverse wave
Longitudinal wave
Frequency
Amplitude
Refraction
Radio wave
Infrared wave
Ultraviolet wave
Transparent
Translucent
Opaque
Intensity
Compression
Rarefaction
Pitch
Decibel
Which refers to the thermal energy that flows from one substance to another when the substances differ in
emperature?
Answer:
Heat
Explanation: The state in which no thermal energy transfer occurs because both substances are at the same temperature.
Answer:
A: Heat
I hope this helps
I am giving 18 points. Please try and don’t just do it for the points.
They won’t let me shown the very last picture, it looks like the normal L shape that is in every picture, and just one straight line. L—
Like that.
Which of the following graphs below represents the motion of an object at variable speeds? (3 points)
Distance
(miles)
Time
(hours)
Distance
(miles)
Time
(hours)
Answer:Distance.
Explanation:
What is the acceleration of an object that has a mass of 10kg and is pushed with a force of 50n
Answer:
5m/s/s
Explanation:
force = mass x acceleration
50 = 10a
a=5m/s/s
Which of the following statements about Copernicus' heliocentric model of the Solar System are accurate?
It was the first such model was supported by scientific evidence.
It was not published until Copernicus was close to death.
It was the first time a heliocentric model had ever been suggested.
It was not controversial, and was readily accepted.
It stated that the Sun revolved around the Earth.
It stated that the Earth revolved around the Sun.
Answer:
(i) It was the first such model was supported by scientific evidence: FALSE
(ii) It was not published until Copernicus was close to death: TRUE
(iii) It was the first time a heliocentric model had ever been suggested: FALSE
(iv) It was not controversial, and was readily accepted: FALSE
(v) It stated that the Sun revolved around the Earth: FALSE
(vi) It stated that the Earth revolved around the Sun: TRUE
Explanation:
We proceed to demonstrate the validity of each option from statement:
(i) It was the first such model was supported by scientific evidence: FALSE
The geocentric model was based mostly on interpretation of two astronomical findings: (a) The displacement of the stars with respect to Earth due to stellar parallax, (b) The apparent consistency of brightness of the planet Venus seen from Earth.
(ii) It was not published until Copernicus was close to death: TRUE
Copernicus published his heliocentric theory, contained in the book De revolutionibus orbium coelestium, months before his death, in 1543.
(iii) It was the first time a heliocentric model had ever been suggested: FALSE
Greek mathematician and astronomer Aristarchus of Samos was the first person who proposed the heliocentric model in the 4th Century.
(iv) It was not controversial, and was readily accepted: FALSE
The Roman Catholic Church defended geocentric model proposed by Claudius Ptolemy and Tycho Brahe and rejected the model proposed by Copernicus, whose publication was included in the Index Librorum Prohibitorum in 1616.
(v) It stated that the Sun revolved around the Earth: FALSE
This is the main idea of the geocentric model.
(vi) It stated that the Earth revolved around the Sun: TRUE
This is the main idea of the heliocentric model.
Name two sub-kingdoms of plant kingdoms
Answer:
⭐. cryptogams ( non-flowering & non-seed bearing)
⭐. phanerogams ( flowering & seed bearing)
Which statement about the relationship between air pressure and air density is accurate?
A) Air pressure decreases as air density increases
B) Air pressure increases as air density increases
C) Air pressure increases as air density decreases
D) Air pressure is unrelated to air density
Answer:
A: Air pressure decreases as air density increases
Explanation:
Pressure is a force exerted on or against an object by being in contact with a substance. Thus, air pressure is due to the bombardment of the air (gas) particles with a surface. Density is defined as the mass per volume of a substance. Thus, air density is defined as the mass of air per unit volume.
If that Explanation does not make any sense let me make it easier.
The air at the top of a mountain is cooler than the air at the bottom. This temperature difference is due to a phenomenon that occurs in Earth’s atmosphere. Air rises and sinks based on differences in temperature and pressure. Here’s a quick experiment that will help explain the role of pressure.Take in a deep breath as if you were ready to blow out birthday candles. Puff your cheeks with air like a chipmunk. Hold it for a few seconds, and then blow the air slowly from your cheeks.Cold air sinks while warm air rises because cold air is denser than warm air. When a lot of cold air sinks, it creates an area of high air pressure where it hits the surface. This high-pressure air flows to an area of low pressure, creating wind. When this air warms, it rises up into the atmosphere.Temperature decreases as altitude increases. That’s why a mountain peak may be covered with snow while the bottom of the mountain is full of green plants and trees. When warm air rises into the atmosphere, it cools. The density of the air increases as it cools, which eventually creates an area of high pressure and starts the cycle again.
If not for this phenomenon of air rising and sinking in the atmosphere, there would be no wind or weather.
I hope that helped!
How do you score a goal in team handball ?
Answer:a goal is scored by throwing the ball into the goal post and is confirmed by deciding that’s if the ball has hit the tape mark or not
Explanation:
Which type of wave has the longest wavelength?
Gamma rays
Ultraviolet rays
Visible light
Microwaves
Radio waves
Answer:
Radio Waves
Explanation:
Speed – time graph of uniform motion is horizontal straight line.
Select one:
a. TRUE
b. FALSE
how would something make more energy in order to travel farther and faster
Answer:
hit it harder
Explanation:
Endicott Kendrick
What is the orbital period of a moon orbits around a 1.0*10^26 kg planet that has a is the orbit radius of 2.48 x 10^7?
Answer:
222334
Explanation:
Please mark me brainlist
What is the momentum of a 120 pound bicyclist that is traveling at 25 mph?
Practice Problem • In 2.5 s a car increases its speed from 60 km/h to 65 km/h while a bicycle goes from rest to 5 km/h.
•Which undergoes the greater acceleration?
• What is the acceleration of each vehicle?
Answer:
they have same acceleration 2m/s^2
Explanation:
a =v-u/t
65-60/2.5
2m/s^2
a) The acceleration of the car and the bicycle are equal since [tex]\delta V[/tex] for both vehicle is 5km/h and the time taken for both vehicle is also the same 2.5s.
b) The acceleration of the bicycle is 0.556m/s²
Given the data in the question;
Time taken for both car and bicycle; [tex]t = 2.5s[/tex]Initial velocity of car; [tex]u_c = 60km/h = 16.667m/s[/tex]Final velocity of car; [tex]v_c = 65km/h = 18.0556m/s[/tex]Since the bicycle starts from rest
Initial velocity of the bicycle; [tex]u_b = 0[/tex]Final velocity of the bicycle; [tex]v_b = 5km/h = 1.38889m/s[/tex]a)
The acceleration of the car and the bicycle are equal since [tex]\delta V[/tex] for both vehicle is 5km/h time taken for both vehicle is also the same 2.5s.
b)
The acceleration of each vehicle
To determine the acceleration for car and the bicycle, we use the first equation of motion:
[tex]v = u + at[/tex]
Where v is the final velocity, u is the initial velocity, a is the acceleration and t is the time.
Now, For the car;
[tex]18.0556m/s = 16.667m/s + ( a + 2.5s )\\\\a = \frac{18.0556m/s - 16.667m/s }{2.5} \\\\a = \frac{1.3886m/s}{2.5s} \\\\a = 0.556 m/s^2[/tex]
Hence, the acceleration of the car is 0.556m/s²
For the bicycle;
[tex]1.38889m/s = 0 + ( a * 2.5s )\\\\a = \frac{1.38889m/s}{2.5s}\\\\a = 0.556m/s[/tex]
Hence, the acceleration of the bicycle is 0.556m/s²
Learn more: https://brainly.com/question/19131245
Most metals have...
a. Atoms that are spread out, and low specific heats
b. Atoms that are close, and low specific heats
c. Atoms that are spread out, and high specific heats
d. Atoms that are close, and high specific heats
In gym class, a student kicks a soccer ball high into the air. As the ball goes upward, which type of energy in increasing?
The answer is kinetic energy
Explation: it is moving
In gym class, a student kicks a soccer ball high into the air. As the ball goes upward, the gravitational potential energy gets increased.
What is Gravitational potential energy?
Gravitational potential energy can be defined as if the energy of an object possesses because of its position in a gravitational field.
The formula for gravitational potential energy is,
U = mgh
where,
U - Gravitational potential energy,
m - Mass,
g - gravitation field,
h - Height.
As we are on the Earth, the gravity acceleration can be as constant and the value is a = 9.8 m/s².
As a student kicks the ball, first it moves upward and its gravitational potential energy is increases and kinetic energy will completely begins to decrease but when the ball falls towards the earth, its gravitational potential energy will be transformed into kinetic energy. When the ball collides with the ground, the kinetic energy is transformed into other forms of energy.
The kinetic energy and gravitational potential energy changes during its movement from ground to the top height. Thus, when the ball goes upward gravitational potential energy gets increased.
Learn more about the energy,
https://brainly.com/question/17617850
#SPJ6
Why is a protective apron or lab coat important to use when working with acids?
Acids conduct electricity and contact could cause a shock.
Acids react with lipids and can cause damage to skin tissue.
Acids break down fabrics and can cause burns if the acids are strong.
Acids have a slippery feel and could result in a fall.
Answer:
Acids break down fabrics and can cause burns if the acids are strong.
Explanation:
A protective apron or lab coat is important when working with acids because acids break down fabrics and can cause burns if the acids are strong.
An acid is a substance that interacts with water to produce excess hydroxonium ions in an aqueous solution. A strong acid ionizes completely in solution. When they come in contact with a fabric, they break them down violently. So, if they come in contact with the skin, it causes a violent break down of body tissues. The apron acts a protective layer.Answer:
C
Explanation:
I got it right
Which statement accurately describes radioactive dating?
a. Geologists use only one type of radioactive dating.
b. Geologists compare parent and daughter elements to determine rock type.
c. Geologists will measure how stable multiple parent elements can decay into multiple daughter elements.
d. Geologists compare the observed abundance of naturally occurring radioactive isotopes and their decay products using decay rates.
Answer: C. is the answer
Explanation:
Answer:
D
Explanation:
took the test :D
What is the "price" that you pay for using less force?
What is the “price” that you pay for using less force? The price that you pay for using less force is having to do more work.
.....................................
dont ask this is what i looked up and found
The "price" that you pay for using less force is:
The object would not moveForce is defined as the energy which is required to move or change the velocity of an object.
There are different types of force which includes:
Gravitational forceApplied forceFrictional force, etcAs a result of this, if there is less force exerted on an object, then the "price" which would be paid for this is that the object would not move.
Read more here:
https://brainly.com/question/24557735