Answer:
B
Explanation:
Low beams should only be used when fog and rain is present, as high beams can cause a dangerous glare to you and other drivers. You should also use your fog lights, but not every vehicle has them.
B.
Explanation:I just took the test and it is in fact correct! Hope this helped and have a good one!
Random Photo of the day10. A long 2 x 4 with a 3" standoff block nailed to each end is used as a
0 points
a. wall brace
b. straightedge
C. gauge block
d. trimmer stud
Answer:
straightedge
Explanation:
It is used for drawing straight lines or checking their straightness
Trans-Aerospace Industries has just begun a multimillion-dollar project. It has a team of 15 engineers working on 6 different components of a new jet they would like to launch in 2015. For this project, they have hired 1 lead engineer, 3 supervisors, and 11 certified PEs. Why is it justifiable to have this large a team with such a management structure?
Answer:
There are three subcategories of aerospace engineering, namely ... And there are many huge companies which are regularly hiring aeronautical engineers. ... Lockheed Martin has worked on some big projects over the years, ... the other aerospace giants, Boeing and Airbus, they hands down have the best ...
Explanation:
Answer:
the answer is Having a manager and supervisor ensures effective interactions so that the different aspects of the project do not fall off track.
Explanation:
just did this
Which of the following is a feature control frame typically used to identify?
A. Dimension lines
B. Extension lines
C. Features of size
D. Measurement equipment
Answer:
C. Feature size
Explanation:
summarize three steps that must be achieved in order to become a certified chemical engineer.
Answer: Earn bachelors degree, complete an internship, and complete relevant exams for certification
Explanation: Degrees in chemical engineering exist at the bachelor’s level and will prepare graduates for entry-level positions in the field. In addition to chemistry classes, students also study in physics, biology, mathematics and kinetics through a mix of classroom teaching, laboratory experiments and fieldwork placements.
While a master’s degree isn’t required, it can help students advance their careers to managerial levels or into research positions. It will also help those who completed their bachelor’s degree in a different field get up to speed on necessary skills and knowledge. After covering the same areas of a bachelor’s degree more in depth, students at this level typically complete a research project or fieldwork placement.
PhDs in chemical engineering are reserved for students who wish to work in the most specialized areas of development and production, or teach the discipline at the collegiate level. This degree covers the intricacies and nuances of chemical reactors, thermodynamics, transport phenomena, and numerical methods and typically includes a large-scale original research project and comprehensive exams.
While not all chemical engineering degree requirements include an internship or co-op component, these are excellent opportunities for gaining experience and building contacts in the field. Bachelor’s level students typically undertake these during their junior and/or senior years, while master’s and PhD level students can elect to do so after their first year of studies. The American Chemical Society maintains a board of internship and fellowship opportunities.
Though other areas of engineering are more stringent about licensure and certification, chemical engineering is less formal and has only a few mandates for entering the field. For those in the industry seeking to work in respected firms, there are a number of steps they can take to be competitive. These include:
Attend an ABET-accredited institution Undertake the Fundamentals of Engineering (FE) examination directly after completing a baccalaureate degree Complete the Professional Engineering (PE) exam after at least four years of relevant work experience
The water jacket is something you put on your engine when it rains?*
True
Or
False?
true
because if rain gets in your engine it could destroy it or you can get electrocuted if you try to touch your engine
Answer: it is true
Because a water jacket protects it from the rain
Against which type of economic structure does conflict theory argue?
ОА. .
communism
OB.
socialism
Oc. democracy
O D. capitalism
Answer:
b) socialism
Explanation:
Conflict theory focuses on the competition between groups within society over limited resources. Conflict theory views social and economic institutions as tools of the struggle between groups or classes, used to maintain inequality and the dominance of the ruling class.
HOPE IT HELPS!!!!!!!!!
Most of the world’s mixed economies are a combination of a __________ economy and a __________ economy.
A.
traditional . . . developing
B.
traditional . . . command
C.
market . . . traditional
D.
market . . . command
Please select the best answer from the choices provided
A
B
C
D
Answer:
The correct option is;
D. Market...Command
Explanation:
In a mixed economy, socialism and capitalism are combined in the economic policy, such the economy allows ownership of and offers protection for private property as well as provision of certain degree of allowance of capital utilization by the private sector. The government of a country with a mixed economic system can disrupt, obstruct, or restrict the activities taking place in the economy in order to meet the social objectives of the country's.
Answer:
D
Explanation:
Cause it is.
Please help meeeee. I don’t have time
Answer: precision
Explanation: because accuracy is right on there and precision is getting closer and closer
Professional services that you need to have performed on your vehicle every six months include: cleaning battery connections if necessary, Test/adjust air
pressure in spare tire, Check level of power steering fluid, Inspect parking brake for proper operation, examine /lubricate hinges, door latches & locks,
Check/Clean body and door drain holes, assess/adjust strength of the coolant.
True or false
Answer:
False
Explanation:
Indeed, not all services listed would need to be performed only until after every six months nor need professional assistance. Hence, it makes the statement false.
For example, these tasks may need to be performed more frequently, that is, less than six months;
Check/Clean body and door drain holes,Inspect parking brake for proper operationThis is the case because they must be performed regularly in other to comfortably use your vehicle.
Limestone (calcium carbonate) particles
arestored in 50-L bags. The void fraction of the particulatematter
is .30(liter of void space per liter of total volume) andthe
specific gravity of solid calcium carbonate is 2.93.
a) estimate the bulk density of the bag contents
(kgCaCO3/liter of total volume)
b) estimate the weight (W) of the filled bags. State whatyou
are neglecting in your estimate.
c) the contents of three bags are fed to a ball mill, a
devicelike a clotes dryer containing steel balls. The
tumblingaction of the balls crushes the limestone particles and
turns theminto a powder. The limestone coming out of the mill is
putback into 50-L bags. Would limestone fill three bags, notfill
three bags completely, or fill more than three bags.Explain.
Answer:
606506 026216n ytj dtyjjtj t
Explanation:
tyjtyjtyjtyj ty
Octave Chanute’s expertise in designing bridges gave him the know-how to tackle some big questions in aviation, such as the structure of biplane wings. What skills have you acquired from school that you could apply to a hobby?
Examples
Creativity. -let you do out of the box things
Problem Solving-Solve situation
Critical Thinking-Sturdy fast pace thinking
Leadership-The ability to guide others
Communication-The ability to talk to others
Collaboration-Working with some one
state 2 reasons on why blind spot checks are important
Answer:
How to Test for a Blind Spot . As you have learned, the blind spot is an area on your retina that has no visual receptors. Because of this, there is a tiny gap in your visual field. While your brain usually fills in the missing information so that you don't notice it, this quick and easy test makes it possible to demonstrate the blind spot , Of this, 300 crashes are, sadly, fatal. 2 Accidents are just as likely on Australian roads if blind spots are ignored. Not every car has blind-spot detection, so it's best to educate drivers about the importance of the blind spot to avoid accidents. However, not acknowledging the blind spot when driving isn't just dangerous for other cars on.
Explanation:
Unit 2 Quiz 1
of 10
Go to next questi
5. Which of the following vehicle systems must work correctly for proper engine functionality?
OA. Air-fuel delivery
OB. Computer system
OC. Cooling system
OD. All of the above
Grade/Exit
Answer:
all of the above
Explanation:
The vehicle systems which must work correctly for proper engine functionality are:
D. All of the above
What is Engine functionality?This refers to the ability of an engine to function so that the vehicle which it is powering is able to work.
With this in mind, we can see that if the engine of a system should work properly, then there needs to be the proper working of the air-fuel delivery, computer system, and the cooling system.
Read more about cooling system here:
https://brainly.com/question/1382943
Analyse what effect the building of an airport may have on the decision of how to use an area of land nearby. (6)
For what purpose can you use a T-square?
Which of the following best defines the term nanotechnology?
A: building with fabricated materials.
B: building with sustainable materials.
C: building while removing contaminants.
D: building with a focus on individual molecules.
The phrase which best defines the term nanotechnology is: C: building while removing contaminants.
What is nanotechnology?Nanotechnology can be defined as the branch of technology that involves the use of matter on a nanoscale or an atomic scale, which is typically about 1 to 100 nanometers.
This ultimately implies that, nanotechnology is a terminology that is used to describe the use of matter on a nanoscale such as in building while removing contaminants.
Read more on nanotechnology here: https://brainly.com/question/26155132
a Miliamp is equal to one millionth(1/1000000) of an amp
(for mechanic class)
Answer:
dsjfpefjejfpoek
Explanation:
fpoiewjfpoewpewofkwpeo
Which option can result from a lack of stable social and professional bonds?
OA
a routine, structured life
OB.
an unstructured, chaotic life
Ос.
an adventurous life
OD
an interesting life
Answer:
OB.
an unstructured, chaotic life
Explanation:
Select the correct text in the passage.
Which sentence best describes the job responsibilities of instrumentation engineers?
They are responsible for the manufacture of mechanical systems used in automated industrial machines. They are responsible for the
development and testing of chemical products used as medications. They are responsible for the development of computer software
applications that simulate the natural environment. They are responsible for integrating sensors with recorders, transmitters, displays, and
control systems.
Answer
They are responsible for the manufacture of mechanical systems used in automated industrial machines.
Explanation:
I'm not 100% sure but I think its that one.
The sentence that best describes the job responsibilities of instrumentation engineers is that They are responsible for the manufacture of mechanical systems used in automated industrial machines.
Who is an Instrumentation Engineering?Instrumentation engineering is known to be a new and not so popular engineering branches. It is one that can be found in India.
Here, Candidates do have a degree in instrumentation engineering are said to work in the electrical, mechanical, etc. field. Instrumentation engineering is one that is based on control processes that employs the use of sensors as a form of an input.
learn more about instrumentation engineers from
https://brainly.com/question/26197895
Which type of the following types of hammers is a welder is likely to have in his or her
toolbox?
Answer: ball peen
plz mark brainliest
The type of hammer that a welder is likely to have in the tool box would be the ball pen hammer.
Who is a welder of metals ?A welder is known as an individual that is trained to handle and work with different types of metals both in the field of moulding and welding of the metals.
The most important tool that should be in the kit of these welders is the ball pen which is the type of hammer that is used for striking nails and chisels (usually performed with the flat face of the hammer).
Learn more about metal here:
https://brainly.com/question/28183884
#SPJ2
Once a design is final, an engineer needs a plan for product ?
Answer:maintenance
Explanation:
Once the designers final an engineer needs a plan for product maintenance
What is the purpose of a presentation model? to fabricate a prototype to test the efficiency of the manufacturing process to test the functionality of essential design features to test how easy the product is for the consumer to use and understand
Answer:
Presentation Model is a pattern that pulls presentation behavior from a view. As such it's an alternative to Supervising Controller and Passive View.
Explanation:
How many extra supports does it take to make a square truss stable?
Answer:
4
Explanation:
Which tool is used to pull the tapered shaft on a tie-rod end from its mating steering component?
Answer:
A Pitman arm puller
Explanation:
this heavy-duty puller is made specially for removing the pressed-on pitman arm from the sector shaft. Tie-rod end puller: This tool is used to pull the tapered shaft on a tie-rod end from its mating steering component.
Tim was recently released from his last job. He was very rigid and would not change a product design once he began a project. He is now working for a new engineering firm and has learned from his last mistake. He is willing to meet with clients to change the needs of each and every situation. As a result, his work is now _____
As a result, his work is now Flexible and responsive to the clients requests.
What is a business?An organisation or enterprising entity engaging in commercial, industrial, or professional activity is referred to as a business.
Businesses can be for-profit corporations or charitable institutions. Limited liability firms, sole proprietorships, corporations, and partnerships are among the several types of businesses.
As such change in design can occur at any step of a product life cycle, it is the revision of a product's specification based on existing or present requirements.
However, due to the cost of making revisions and the prior expenses paid if the design that was later changed had proceeded into more advanced phases, it is more cost-effective to make changes to the design at the early stages of a product than at the later stages.
Thus, the work is now as per the clients, i.e., flexible and responsive.
For more details regarding a business, visit:
https://brainly.com/question/15826604
#SPJ2
Mobility refers to the ability to?
Answer:
Drive
Explanation:
Drive is a great example
When exchanging information with anyone involved in the collision, you should _____.
A. only give them what they ask for
B. give them your passport first
C. give them your name, address, and vehicle registration number, as well as show your driver license
D. not give them your information because they could use it against you
Answer:
its c
Explanation:
i took the test
Answer:
C. give them your name, address, and vehicle registration number, as well as show your driver license
Explanation:
When exchanging information with anyone involved in the collision, you should give them your name, address, and vehicle registration number, as well as show your driver license.
in a paragraph of 125 words, explain at least three ways that engineers explore possible solutions in their
projects
Answer:
Three ways that engineers explore possible solutions in their projects are;
1) Prototyping
2) Simulation
3) Calculations
Explanation:
1) Prototyping is the process of experimental testing of samples of design, or model of a product with the possibility of the inclusion of control of parameters in order to determine the workability of a solution.
2) Simulation is the process of creating an imitation of a situation, operation or process which can be used to determine if a particular solution will be able to work as required in the simulated environment of a problem.
3) Calculations are used to find preliminary results of particular situations, their cause and effects based on scientific laws, theories and hypothesis such that the factor of the problem is equated with the available ideas to find the best possible solution.
Answer:
well wuts the answer
Explanation:
Which of the following are typical categories of specifications and limitations?
O. design
O. environmental effects
O. supervision and management
O. ethical or legal implications
O. health and safety considerations
O. sustainability
O. cost and benefit difficulty
Answer:
cost and benefit
health and safety
ethical and legal
environmental effects
sustainability
Explanation:
these are the correct answers
Answer:
A, C, F, G, H
Explanation:
environmental effects
ethical or legal implications
sustainability
health and safety considerations
cost and benefit
What specific construction problems can be minimized by effective site planning? (Select all that apply.)
worker safety issues
environmental impact
zoning restrictions
structural defects
budget overages
Answer:structural defects, environmental impact
Explanation:
Structural Defects refers to any fault or deviation from the originally intended structural performance of any piece construction work. Structural defects usually arise from poor planning of the construction or bad workmanship.
Also, at the planning stages of a construction work, environmental impact of the project is always a major consideration. Adverse environmental impact of a project arises from poor planning of the project.