Which weighs more: 7.65 moles of sulfuric acid (H2SO4) or 7.89 x 1024 formula units of copper (II) chloride (CuCl2)

Answer:

D. The electrons are trapped in the crystal lattice structure and cannot move.

Explanation:

Ionic compounds are compounds that consist of positive and negative ions that are held together by the electrostatic forces of attraction. In the solid phase, these ions are arranged in a regular, repeating pattern known as a crystal lattice. The ions are held in place by the electrostatic forces of attraction, and the electrons are trapped within the crystal lattice structure. Because the ions and electrons are unable to move freely, ionic compounds do not conduct electricity in the solid phase.

The number of molecules of ammonia formed are: 8/3

Explanation:

The number of Nitrogen molecules is 4.

The number of Hydrogen molecules is 4.

The balanced chemical equation for formation of ammonia is:

N2 + 3H2 ----- 2NH3

According to the above equation, 3 molecules of H2 require one molecule of N2.

So, 4 molecules of H2 will require  4/3 molecules of N2

Hydrogen acts as a limiting reagent. This means that the number of ammonia molecules produced depends only on the number of hydrogen molecules.

Therefore, for 4 molecules of Hydrogen, the number of ammonia molecules produced is 8/3

An alarm clock draws 0. 6 a of current when connected to a 120 volt circuit. So the resistance of the alarm clock is 200 ohms.

To calculate the resistance of the alarm clock, we can use Ohm's Law, which states that the current through a conductor is equal to the voltage divided by the resistance. The equation is:

V = I * R

Where V is the voltage, I is the current, and R is the resistance. We know that the voltage is 120 volts and the current is 0.6 amps, so we can rearrange the equation to solve for R:

R = V / I

By substitute the known value

R = 120 volts / 0.6 amps = 200 ohms.

Learn more about Resistance here:

https://brainly.com/question/29427458

#SPJ4

70% is the percent composition of silicon in silicon carbide (sic).

Given,

To know more about Silica here

https://brainly.com/question/953530

#SPJ4

The  percent composition of silicon in the compound silicon carbide is approximately 70 %.

The silicon has an atomic mass of 28 g.

Atomic mass if C (Carbon atom) = 12 g.

Silicon Carbide mass total = 28 + 12

= 40 g.

Using the formula now.

Silicon mass divided by the compound's total mass yields a composition percentage of 100%.

= 28/40 × 100 %

= 70 %

Therefore, the silicon content in SiC is 70%.

Covalent bonds hold the silicon carbide crystals together as they form during the crystallisation process. The arrangement of the atoms creates two primary coordination tetrahedra with four silicon and four carbon atoms joined to a central Si and C atom.

To learn more about atomic mass click here:

https://brainly.com/question/14250653

#SPJ4

Answer:

Hey there! The rate of consumption of a compound is just a fancy way of saying how quickly it's used up in a chemical reaction. To find this rate, you'll need to measure the change in the concentration of the compound over time during the reaction. This can be done by taking periodic samples of the reaction mixture and analyzing the concentration of the compound using techniques like spectrophotometry or chromatography. The rate of consumption can be expressed using the following formula:

rate of consumption = -(Δ[compound]/Δt)

This formula is based on the concept of reaction rate, which is the change in the concentration of a reactant or product per unit time. I hope this information is helpful! If you have any more questions, just let me know.

The concentration of ammonia used is equal to 2.07 mol.dm⁻³.

A neutralization reaction can be explained as a reaction in which an acid and base react to form respective salt and water. When a strong acid will react with a strong base and the respective salt will be neither acidic nor basic.

When H₃PO₄ reacts with ammonia, the resulting salt is ammonium phosphate.

H₃PO₄    +  3 NH₃   →  (NH₄)₃PO₄

Given, the concentration of phosphoric acid = 1.25 mol dm⁻³

The volume of the phosphoric acid = 25 cm³ = 25 × 10⁻³ dm³

The number of moles of phosphoric acid, n = M × V = 1.25 × 25 × 10⁻³ = 0.0313 mol

The volume of the ammonia = 45.3 cm³ = 45.3 × 10⁻³ dm³

The number of moles of ammonia, n = 0.0313×3 = 0.0938 mol

The concentration of ammonia = 0.0938/45.3  × 10⁻³  = 2.07 mol dm⁻³

Learn more about neutralization reaction, here:

brainly.com/question/20038776

#SPJ1

The food which is lowest in sodium is fresh carrots.

Table salt is a substantial source of sodium. The average American consumes at least five teaspoons of salt per day. This is around 20 times more than what the body requires. Actually, your body only requires 1/4 teaspoon of salt per day. Although salt is naturally contained in food, processing and preparation add a significant amount of sodium. Many foods contain a large amount of sodium despite not tasting salty. High salt content can be found in processed, canned, or ready-made foods. Additionally, a lot of the meals offered at fast-food restaurants are high in sodium.

The food with the lowest salt content is fresh carrots.

Learn more about sodium

brainly.com/question/30098334

#SPJ4

The Lewis structure for HCCH (ethyne) by placing atoms on the grid and connecting them with bonds is-

For more details on Ethyne, visit:

https://brainly.com/question/4225077

lewis structure of ethyne is

Ethyne, also known as acetylene, is a hydrocarbon with the chemical formula C2H2. It is a colorless and highly flammable gas that has a distinct garlic-like smell. Ethyne is a member of the alkyne family, which is characterized by its triple bond between the two carbon atoms. This triple bond gives ethyne its unique chemical properties, such as high reactivity and stability.

Ethyne is used in a variety of industrial processes, such as welding and cutting, where the intense heat generated by the combustion of ethyne is used to melt metal. It is also used as a raw material in the production of chemicals such as acrylonitrile and vinyl acetylene. However, ethyne should be handled with caution as it is extremely flammable and can cause serious injury if not handled properly.

To know more about ethyne

https://brainly.com/question/9929793

#SPJ4

Answer:

Electromagnetic radiation can be described by its amplitude (brightness), wavelength, frequency, and period. By the equation E = h ν E=h\nu E=hν, we have seen how the frequency of a light wave is proportional to its energy.

Argon - 40 and Argon - 41, they are isotopes as they have the same number of protons but a different number of neutrons.

Isotopes are atoms with different atomic numbers but occupy the same place on the periodic table.

So, the elements on the periodic table that you see are not just one element, but two or more elements are sitting in that position. Isotopes of an element have the same number of protons as that element, but different numbers of neutrons, so they have the same atomic number but different mass numbers.

Atomic numbers, Argon - 40 and Argon - 41 have the same atomic number of 18.

So, the correct answer is option four.

Learn more about isotopes at https://brainly.com/question/364529

#SPJ4

Every diatomic molecule is having a linear geometry. The shape of dioxygen is linear with double bond between the oxygen atoms.

Molecules are formed by the combination of atoms. There are diatomic , triatomic  or tetratomic molecules or simply polyatomic molecules. Molecule are the basic units of compounds.

Oxygen is an electronegative element and is normally exists as diatomic molecules in atmosphere. Oxygen have 6 valence electrons and need two more electrons to achieve stability.

Thus, one oxygen combines with other by sharing two electrons each and forms a double bond between. Thus the oxygen molecules exhibit a linear geometry.

To find more on dioxygen, refer here:

https://brainly.com/question/19905677

#SPJ1

Explanation:

a branch of technology that are less than 100nanometerlong

Photoelectric sensors project and detect an infrared beam across an area.

photoelectric phenomenon in which  charged particles are emitted from or within a material upon absorption of electromagnetic radiation. This effect is often defined as the ejection of electrons from a metal plate when light hits it. In a broader definition,  radiant energy can be infrared, visible, or ultraviolet, X-rays, or gamma rays. Materials can be solids, liquids, or gases. Emitted particles can be both ions (charged atoms or molecules) and electrons.

This phenomenon was fundamental to the development of modern physics as it posed an enigmatic question about the properties of light (the behavior of particles or waves) that was finally solved by Albert Einstein  in 1905.

To know more about photoelectric:

https://brainly.com/question/26465043

#SPJ4

The formal charges on the sulfur and the oxygen are +6 and -2 respectively. Option A

Let us note that the formal charge would have to do with the kind of charge that the atom in the compound would tend to have. In the case of the compound that we have here, we are looking at the formal charges on the sulfur and the oxygen atoms in the compound.

Now we know that the sulfur atom would have a formal charge of + 6 if there are no double bonds that are in the structure while each of the oxygen atoms would have a formal charge of -1.

Learn more about formal charge:https://brainly.com/question/11723212

#SPJ1

1 times 2 that will give us 2 and then the oxygen since we need to have 6 we can put a 3 right here is the coefficient. 2 times 3 that equals 6. And we're done this equation is balanced the trick

In its simplest form in algebra, the definition of an equation is a mathematical statement that shows that two mathematical expressions are equal. For instance, 3x + 5 = 14 is an equation, in which 3x + 5 and 14 are two expressions separated by an 'equal' sign.

A mathematical equation which represents the relationship of two expressions on either side of the sign. It mostly has one variable and equal to symbol.

To know more about equation visit

https://brainly.com/question/10724260

#SPJ1

It can be concluded that the two samples with sulfur, oxygen, and sodium are the same compounds.

Out of the four given choices, option 1 is the most appropriate one. This can be justified by the fact that the samples in the question have the same chemical and physical properties, which are not considered for a mixture. It can neither be a solution because a solution can not exist in solid form but liquid. As per the question, the sample contains three elements, named sulfur, oxygen and sodium, so it is a compound.

A chemical compound is a substance that contains atoms from multiple chemical elements held together by chemical bonds. It is made up of numerous identical molecules. Therefore, a molecule made up of only one type of atom is not a compound.

To know more about compounds, refer to the following link:

https://brainly.com/question/26487468

#SPJ4

Complete question is:

Two solid samples each contain sulfur, oxygen, and sodium, only. These samples have the same color, melting point, density, and reaction with an aqueous barium chloride solution. It can be concluded that the two samples are the same.

(1) compound (3) mixture

(2) element (4) solution

Option (b) is correct. Amides are the derivative of amines and carboxylic acids.

Amides are the derivatives of carboxylic acid and amines. A carboxylic acid contains the  −COOH  functional group, and in an amide the  −OH  part of that group is replaced by an  −NH2  group. So, amides contain the  −CONH2  group. Any member of either of two classes of nitrogen-containing compounds related to ammonia and amines. The covalent amides are neutral or very weakly acidic substances formed by replacement of the hydroxyl group (OH) of an acid by an amino group NR2, in which R may represent a hydrogen atom or an organic combining group such as methyl, CH3. Among the amides of commercial importance are acetamide and dimethylformamide HCON(CH3)2, which are used as solvents, the sulfa drugs, and the nylons.

To learn more about Amides please visit:

https://brainly.com/question/11622057

#SPJ4

The mass of oxygen that reacted would be 26.32 grams.

The balanced equation of the reaction would be as follows:

[tex]SO_2(g) + 2O_2(g) --- > 2SO_3(g)[/tex]

Thus, the mole ratio of the [tex]SO_3[/tex] that is produced and the [tex]O_2[/tex] that reacts is 1:1.

Recall that, mole is the ratio of mass and molar mass. That is:

Mole = mass/molar mass

Mole of 65.8 grams of  [tex]SO_3[/tex] = 65.8/80 = 0.8225 mol

From the mole ratio, the equivalent mol of  [tex]O_2[/tex] that reacts would also be 0.8225 mol.

Mass of 0.8225 mol [tex]O_2[/tex] = 0.8225 x 32

                                       = 26.32 grams

In other words, the mass of oxygen that reacted to produce 65.8 grams of [tex]SO_3[/tex] according to the reaction is 26.32 grams.

More on stoichiometric problems can be found here: https://brainly.com/question/28297916

#SPJ1

The order of increasing non polar covalent character will be Li-H< Cl-H < Si-H < P-H.

The electronegativity of H, Si, P, Cl and Li are respectively 2.1 , 1.8 , 2.1 , 3.0 and 1.0 . Lower the electronegativity difference between the bonded atoms , higher the nonpolar covalent character in the bond. The electronegativity difference between the atoms in the given bonds are following:

Si-H = 0.3

P-H = 0

Cl-H = 0.9

Li-H = 1.1

Electronegativity cannot be directly measured and must be calculated from other atomic or molecular properties. Several methods of calculation have been proposed and, although there may be small differences in the numerical values of the electronegativity, all methods show the same periodic trend between elements.

To know more about covelent character here

https://brainly.com/question/1593923

#SPJ4

FeCl3, an excellent Lewis acid, has been widely and successfully used as a catalyst in a wide range of organic chemical processes.

Fluorine is mostly found in calcium fluoride (CaF2), which is a natural substance. Fluorite, often known as fluorspar, is a mineral form of it.

An insoluble ionic combination made up of Ca2+ and F ions is called calcium fluoride (CaF2). 'Fluorite,' also known as fluorspar, and 'Blue-John,' are the two names for the mineral when it is found in nature.

With the formula BeI2, beryllium iodide is an inorganic substance. A white solid, it is hygroscopic.

When metallic iron and dichloride are combined, anhydrous iron (III) chloride can be created. In a wide range of organic chemical processes, iron(III) chloride (FeCl3), a potent Lewis acid, has been used as a catalyst on a large scale and with great success.

To learn more about anhydrous iron refer to:

https://brainly.com/question/8455333

#SPJ4

The octahedral crystal-field splitting diagram for each species metal is Mn(H2O)62+.

Crystal field splitting is the process by which two ligand d orbitals are separated in energy. The crystal field splitting number is represented by the capital Greek letter. By dividing the crystal field, two similar metal-ligand complexes with distinct hues are produced.Electrostatic interactions between the ligand's electrons and the lobes of the d-orbital cause them to split. The electrons are drawn to the axis of an octahedron. Every orbital that has a lobe on its axis becomes more energetic.The crystal field splitting energy (o), with the subscript o standing for octahedral, is the difference between the energy levels of an octahedral complex. As we shall see, the charge on the metal ion, the location of the metal in the periodic table, and the makeup of the ligands all affect how much splitting occurs.

learn more about  energy levels Refer:brainly.com/question/29736874

#SPJ4

I'm sorry, but I am not able to send videos. However, I can provide you with some information about organic compounds.

An organic compound is a chemical compound that contains carbon. Carbon is a unique element because it can form a vast number of chemical compounds, and many of these compounds are essential for life. Organic compounds are found in all living things and play a variety of roles in biological processes.

There are many types of organic compounds, including carbohydrates, lipids, nucleic acids, and proteins. Carbohydrates, such as sugars and starches, are used as a source of energy. Lipids, such as fats and oils, are used for energy storage and insulation. Nucleic acids, such as DNA and RNA, contain genetic information and play a role in the synthesis of proteins. Proteins are complex molecules that perform a variety of functions in the body, including structural support, enzyme catalysis, and signaling.

Organic compounds are also found in non-living things, such as fossil fuels and synthetic materials. Many everyday products, such as plastics, dyes, and pharmaceuticals, are made from organic compounds.

It is an issue with effectiveness. This is evident at every stage of the production and consumption chain, starting with the use of the land. About 60% of the world's agricultural land is utilised for livestock grazing in response to the rise in demand for meat and dairy.

The total number of people, of all ages, residing in all nations worldwide is referred to as the world population. The world population is expected to reach 7.8 billion people in 2020 due to growth.

The development of modern medicine and the lessening of poverty around the world over the past two centuries have contributed significantly to the increase in the world's population. Due to the huge decrease in baby, child, and maternal mortality, life expectancy has increased.

Thus, It is an issue with effectiveness. This is evident at every stage of the production and consumption chain, starting with the use of the land.

To learn more about the global population, follow the link;

https://brainly.com/question/9875500

#SPJ1

In accordance with the posed question, the new volume is 10.44 L.

The phrase "ideal gas" describes a fictitious gas made up of molecules that adhere to the following principles: No attraction or repellence exists between the molecules of ideal gases. The sole interaction between molecules of an ideal gas would be an elastic impact when they collided or an athletic collision with the container walls.

Given data

Initial pressure (P₁): 3.36 bar

Initial volume (V₁): 15.0 L

Initial temperature (T₁): 298 K

Final pressure (P₂): 5.00 atm

Final volume (V₂): ?

Final temperature (T₂): 350 K

Step 2: Convert P₁ to atm

We will use the conversion factor 1 atm = 1.01325 bar.

3.36 bar × (1 atm / 1.01325 bar) = 3.32 atm

Step 3: Calculate V₂

We will use the combined gas law.

P₁ × V₁/T₁ = P₂ × V₂/T₂

V2 = P1 V1 T2/T1 P2

V₂ = 3.32 atm × 15.0 L × 350 K/298 K × 4.40 atm

V₂ = 10.44 L

To know more about Ideal Gas visit :

https://brainly.com/question/3861865

#SPJ4

The complete chemical equation of the chemical reaction in which Beryllium chloride is heated with potassium to produce beryllium and potassium chloride is as follows:

Chemical equations are symbols and chemical formulas that depict a chemical reaction symbolically.

Chemical equations use the symbols of the elements, ions, or compounds that are involved in the reaction to represent the reaction.

The given reaction describes how Beryllium can be extracted from beryllium chloride.

The chemical reaction is as follows: Beryllium chloride is heated with potassium to produce beryllium and potassium chloride.

The chemical equation of the reaction is as follows:

BeCl₂ + 2 K ---> Be + 2 KCl

Learn more about chemical equations at: https://brainly.com/question/26227625

#SPJ1

According to the molecular geometry, the shape of of compound with central sulfur atom with two unshared pairs of electrons and single bonds to two hydrogen atoms is V-shaped and bond angle is 92.1 °.

Molecular geometry can be defined as a three -dimensional arrangement of atoms which constitute the molecule.It includes parameters like bond length,bond angle and torsional angles.

It influences many properties of molecules like reactivity,polarity color,magnetism .The molecular geometry can be determined by various spectroscopic methods and diffraction methods , some of which are infrared,microwave and Raman spectroscopy.

Learn more about molecular geometry,here:

https://brainly.com/question/28557524

#SPJ1

There are three chirality centers in the structure: The carbon atom at the center of the molecule, the nitrogen atom at the top of the molecule, the oxygen atom at the bottom of the molecule.

What is structure?
Structure is the arrangement of components within a system. It is used to define the layout, connections and interactions of those components, in order to achieve a certain purpose. Structures can be physical, such as the structure of a bridge, or abstract, such as the structure of a story. Structures can be simple or complex and can involve multiple levels of inter-related components. For example, a business may have a hierarchical organizational structure with a CEO at the top, followed by a board of directors and then various departments and teams. Structure is an important part of any system because it helps to create order and organization, and provides clarity and understanding.

To learn more about structure
https://brainly.com/question/28353159

#SPJ4

The type of materials which is preferred for wearing in a structural firefighting clothing would be of a synthetic fiber that is flame resistant and has a high melting point.

Structural firefighting clothing is designed to protect firefighters from the heat and flames of a fire, as well as from falling debris. For structural firefighting clothing, materials that are typically used include nomex, kevlar, PBI, PTFE all of which are synthetic fiber that is heat and flame resistant, durable, and has a high melting point.

In general, the materials used in structural firefighting clothing should be flame resistant, heat resistant, and durable. They should also be able to withstand the rigors of firefighting, including exposure to water, dirt, and other harsh conditions.

To learn more about structural firefighting visit: https://brainly.com/question/14186083

#SPJ4