Answer:
2 ml=2 cm³
Explanation:
volume=mass/density
1ml= 1cm³
= 24g/12g/cm³
= 2 cm³
Answer:
2 ml=2 cm³
Explanation:
volume=mass/density
1ml= 1cm³
= 24g/12g/cm³ = 2 cm³
please mark me brainiest you said you would!
What is the correct chemical formula for Fe3+ and P3-
Answer:
FeP, which is iron (III) phosphide.
Explanation:
Hello,
In this case, when iron (III) ion and phosphide ion react, the following compound is formed as the charges are exchanged to each other at the subscripts:
[tex]Fe^{3+}+P^{3-}\rightarrow Fe_3P_3[/tex]
Yet, since the three could be simplified to 1 at both Fe and P, we obtain:
[tex]Fe^{3+}+P^{3-}\rightarrow FeP[/tex]
Which is known as iron (III) phosphide.
Best regards.
1pt Which part of the scientific method helps you figure out what you've learned?
O A. Predict
OB. Observe
O C. Design
O D. Analyze
Be sure to answer all parts. The following IUPAC name is incorrect. Which of the following is the best explanation for why the name is incorrect? 3−butyl−2,2−dimethylhexane The longest chain was not chosen. The compound is spelled incorrectly. The compound is alphabetized incorrectly. The compound has incorrectly labeled substituents. Correct the name: 1−ethyl−1−tert−butylpentane 4−tert−butyloctane (1,1,1−trimethyl)−sec−butylpentane tert−butyloctane
Answer:
Which of the following is the best explanation for why the name is incorrect?
- The longest chain was not chosen.
- 4−tert−butyloctane
Explanation:
Let's think in the condensed formula:
CH₃C(CH₃)₂CH((CH₂)₃CH₃)CH₂CH₂CH₃.
We see that in the second carbon, we have two methyls and in the third carbon a butyl group.
But the name is incorrect because the longest chain was not chosen.
For IUPAC rules we have to determine:
- The longest main chain.
- From two chains of equal length, we may choose the most branched chain.
- It must be numbered starting from the end that has the closest branch.
- Each remainder is named as a substitute for the main chain
If we draw the alkane we have:
CH₃
|
CH₃ - C - - CH - - CH₂ -- CH₂ -- CH₃
| |
CH₃ CH₂
|
CH₂
|
CH₂
|
CH₃
The carbon in black, is the first carbon, if we start to number from the underlined carbon, we would have the first branch at carbon 5. We have 8 carbons, so if we start to count from the black carbon (carbon 1), the branch will be at the carbon 4, that's the main chain.
So finally, at the carbon 4 we have a tertiary carbon (it is a single carbon which is joined with 3 others carbons, and the single carbon is it joined to the main chain). That is the tert-butyl group.
As it is in the fourth position, we can say that the alkane's name is 4−tert−butyloctane.
Notice that tert-butyl is a common name but it is available by IUPAC.
How much energy is required to heat the solid iron from 1535 ∘C to 2000 ∘C?
Answer:
[tex]Q=206.46\frac{J}{g}[/tex]
Explanation:
Hello,
In this case, since the energy due to the change of temperature is computed via:
[tex]Q=mCp\Delta T[/tex]
Thus, since the specific heat of iron is 0.444 J/(g°C), the heat per unit of mass turns out:
[tex]Q=0.444\frac{J}{g\°C}(2000-1535)\°C\\ \\Q=206.46\frac{J}{g}[/tex]
Best regards.
"206.46 J/g" energy required to heat the solid iron.
Energy due to change in temperature:The movements or the activity of microscopic particles known as atoms, molecules, or ions in solids, solvents, as well as gases.
Thermal energy may go from one item towards the another one.
Given:
Temperature, [tex]T_1 = 1535[/tex]°C
[tex]T_2 = 2000[/tex]°C
Change, [tex]\Delta T = T_2-T_1[/tex]
We know the relation,
→ [tex]Q = mC_p \Delta T[/tex]
By putting the values,
[tex]= 0.444(2000-1535)[/tex]
[tex]= 206.46[/tex] J/g
Thus the answer above is right.
Find out more information about energy here:
https://brainly.com/question/2033877
A cubic piece of platinum metal (specific heat capacity = 0.1256 J/°C･g) at 200.0°C is dropped into 1.00 L of deuterium oxide ('heavy water,' specific heat capacity = 4.211 J/°C･g) at 25.5°C. The final temperature of the platinum and deuterium oxide mixture is 41.9°C. The density of platinum is 21.45 g/cm³ and the density of deuterium oxide is 1.11 g/mL. What is the edge length of the cube of platinum, in centimeters?
Answer:
[tex]a=5.65cm[/tex]
Explanation:
Hello,
In this case, for this heat transfer process in which the heat lost by the hot platinum is gained by the cold deuterium oxide based on the equation:
[tex]Q_{Pt}=-Q_{Deu}[/tex]
We can represent the heats in terms of mass, heat capacities and temperatures:
[tex]m_{Pt}Cp_{Pt}(T_f-T_{Pt})=-m_{Deu}Cp_{Deu}(T_f-T_{Deu})[/tex]
Thus, we solve for the mass of platinum:
[tex]m_{Pt}=\frac{-m_{Deu}Cp_{Deu}(T_f-T_{Deu})}{Cp_{Pt}(T_f-T_{Pt})} \\\\m_{Pt}=\frac{-1.00L*1110g/L*4.211J/(g\°C)*(41.9-25.5)\°C}{0.1256J/(g\°C)*(41.9-200.0)\°C} \\\\m_{Pt}=3860.4g[/tex]
Next, by using the density of platinum we compute the volume:
[tex]V_{Pt}=\frac{3860.4g}{21.45g/cm^3}\\ \\V_{Pt}=180cm^3[/tex]
Which computed in terms of the edge length is:
[tex]V=a^3[/tex]
Therefore, the edge length turns out:
[tex]a=\sqrt[3]{180cm^3}\\ \\a=5.65cm[/tex]
Best regards.
how does adding energy to an atom affect its electrons
How does the automatic hammer convert gravitational potential energy into kinetic energy?
Answer:
Exolaiend in explanation section
Explanation:
First of all, the automatic hammer is used to drive nails into tight spaces where where we can't get a sufficient striking force if we are to use a normal regular hammer in driving the nail.
So the nail to be driven is lifted out of rest(it's position). The energy here is gravitational potential energy.
Now, when it is driven into the tight spaces, the gravitational energy would be converted to kinetic energy due to the motion and speed involved.
Silicon carbide is an abrasive used in the manufacture of grinding wheels. A company is investigating whether they can be more efficient in the construction of such wheels by making their own via the following reaction. (a) If this reaction consistently has a yield of , what is the minimum amount (in ) of both silicon dioxide and carbon needed to produce of for the manufacture of cutting wheels? silicon dioxide kg carbon kg (b) The silicon dioxide is to be obtained from sand and the carbon is derived from coal. If the available sand is by weight and the coal is by weight, and assuming the other material does not interfere with the intended reaction, what mass of coal (in ) is needed for each metric ton of sand used? () kg
Answer:
A. Amount of SiO₂ = 102941.25 moles of SiO₂
Amount of C = 308823.75 moles of C
B. 0.712 metric tons of coal is required for every metric ton of sand
Note: The question is incomplete. the complete question is given below;
Silicon carbide is an abrasive used in the manufacture of grinding wheels. A company is investigating whether they can be more efficient in the construction of such wheels by making their own SiC via the reaction.
SiO₂ + 3C = SiC + 2CO
a. If this reaction consistently has a yield of 83%, what is the minimum amount of both silicon dioxide and carbon needed to produce 3500 kg of SiC for the manufacture of cutting wheels?
Amount of silicon dioxide = ? mol
Amount of carbon = ? mol
b. The silicon dioxide is to be obtained from sand and the carbon is derived from coal. If the available sand is 93% SiO2 by weight and the coal is 75% C by weight, what mass of coal is needed for each metric ton of sand used?
Mass of coal = ? metric tons
Explanation:
A. First the theoretical yield from the equation is determined
100/85* 3500 kg = 4117.65 kg = 4117650 g
molar mass of silicon dioxide = 28 + 2*16 = 60 g/mol; molar mass of carbon = 12g/mol; molar mass f SiC = 28 + 12 = 40 g/mol
40 g SiC is produced by 60 g of SiO₂
4117650 g of SiC will be produced by 4117650 * 60/40 g of SiO₂ = 6176475 g of SiO₂ = 6176.475 kg of SiO₂
Amount in moles = 6176475 g / 60 g/mol = 102941.25 moles of SiO₂
40 g SiC is produced by 3 * 12 g of C = 36 g of C
4117650 g of SiC will be produced by 4117650 * 36/40 g of C = 3705885 g of C = 3705.885 kg of C
Amount in moles = 3705885 g / 12 g/mol = 308823.75 moles of C
B. I metric tonne = 1000 kg
amount of sand required = 100/93 * 6176.475 kg = 6641.37 kg = 6.64 tonnes
amount of coal required = 100/75 * 3705.885 kg = 4941.18 kg = 4.94 tonnes
ratio of coal to sand = 4.94/6.64 = 0.712
Therefore, 0.712 metric tons of coal is required for every metric ton of sand
The chemical name for laughing gas is dinitrogen oxide. The two elements found in a sample of this gas are and .
When a piece of zinc metal is carefully placed in a beaker of strong acid, bubbles form on the surface of the metal and begin to rise to the surface.
The bubbles most likely indicate that
A.
a new substance is being produced.
B.
the zinc metal is melting.
C.
the acid solution is boiling.
D.
a physical change is occurring.
Answer:
A. a new substance is being produced.
Explanation:
The bubbles most likely indicates that a new substance is being produced by this reaction. In essence, we describe this sort of change as chemical change.
In a chemical change, new substances are usually produced. They are accompanied by the evolution or absorption of energy.
The reaction of Zinc with a strong acid to produce bubbles on the surface of the metal indicates a chemical change and the formation of a new kind of substance.
Take for example, let zinc reacts with hydrocholoric acid, HCl;
Zn + 2HCl → ZnCl₂ + H₂
Since Zn is higher than Hydrogen in the activity series, it will displace it from HCl and liberate hydrogen gas as a product. This will cause the bubbles observed in the reaction.
This is a chemical change and new products have been formed.
B and D are wrong because they are both physical changes.
C is wrong because no information about such is provided by the problem statement.
So, when a piece of zinc metal combines with a strong acid, a new kind of substance is produced.
This section of the periodic table is called a(n)
Answer:
Is it Group?
Explanation:
Fill in the blank with the correct response:
The ______________ contains all the water on Earth and is why Earth is referred to as the blue planet.
A.magnetosphere
B.hydrosphere
C.atmosphere
D.lithosphere
what makes calcium and nitrogen different list two differences
Answer:
the difference in electronegativity is so large (2.04) that the bonding electrons spend almost all their time on the nitrogen atom.
Explanation:
Because calcium loses 2 electrons to become Ca2+, and nitrogen gains 3 electrons to become N3−, you need two calcium atoms and three nitrogen atoms in order to form a neutral compound.
What is the true ratio of atoms in a molecule or formula unit called?
O the molecular formula
O the molar mass
O the percent composition
O the empirical formula
Answer:
the molar mass
Explanation:
Answer:
The molecular formula
Explanation:
A on edge
Mass of Mg (g): 0.2000 Mass of oxide (g): 0.3317 1. Determine the empirical formula of the oxide of magnesium. (Think carefully about the precision of each mass that you measured before you do this calculation. How many significant figures are justified for each mass?) 2. Write the correctly balanced chemical equation for the reaction of magnesium with molecular oxygen. 3. Write the correctly balanced chemical equation for the reaction of magnesium with molecular nitrogen. 4. Write the correctly balanced chemical equation for the reaction of magnesium nitride with water. 5. Write the correctly balanced chemical equation for the reaction of heating magnesium hydroxide
Answer:
1. Empirical formula is MgO
2. 2Mg + O₂ --> 2MgO
3. 3Mg + N₂ ---> Mg₃N₂
4. Mg₃N₂ + 6H₂O ----> 3Mg(OH)₂ + 2NH₃
5. Mg(OH)₂ ---> MgO + H₂O
Explanation:
1. Empirical formula:
mass of magnesium oxide = 0.3327 g; mass of magnesium = 0.2000 g
mass of oxygen = 0.3317 g - 0.2000 g = 0.1317 g
molar mass of magnesium = 24, molar mass of oxygen = 16
molar ratio of magnesium to oxygen is then calculated;
magnesium = 0.2000/24 = 0.0083 : oxygen = 0.1317/16 = 0.0082
magnesium = 0.0083/0.0082 = 1 : oxygen = 0.0082/0.0082 = 1
molar ratio of magnesium to oxygen = 1 : 1
Therefore, empirical formula is MgO
2. The reaction of magnesium with molecular oxygen produces magnesium oxide as shown by the equation below:
2Mg + O₂ --> 2MgO
3. The reaction of magnesium with molecular nitrogen produces magnesium nitride as shown by the equation below:
3Mg + N₂ ---> Mg₃N₂
4. The reaction of magnesium nitride with water produces magnesium hydroxide and ammonia gas as shown by the equation below:
Mg₃N₂ + 6H₂O ----> 3Mg(OH)₂ + 2NH₃
5. The products of the reaction of heating magnesium hydroxide are magnesium oxide and water as shown by the equation below:
Mg(OH)₂ ---> MgO + H₂O
How do you test color?
Review the following statements regarding properties of real and ideal gases. Identify the statement that is not correct? Group of answer choices The ratio PV/RT = 1 for one mole of an ideal gas. The ratio PV/nRT < 1 for one mole of a real gas because of repulsive interactions between the molecules. The ratio PV/nRT > 1 for one mole of a real gas because of the finite size of the molecules. At low temperatures, the attractive forces between molecules cause a real gas to deviate from ideal gas behavior. At high pressures, the finite size of the molecules causes a real gas to deviate from ideal gas behavior
Answer:.The ratio PV/nRT < 1 for one mole of a real gas because of repulsive interactions between the molecules.
Explanation:
The expression PV/nRT is referred to as the compressibility factor commonly designated as Z.
This compressibility factor (Z) for real gas is often less than 1. Z<1 means attraction forces are dominant in the system.
Hence, Z<1 implies attractive and not repulsive force dominance in the system.
What happens to a gas when heat is removed?
Answer: Heat is removed from a gas, and the substance becomes a liquid.
A liquid has a density of 16 g/mL. If you have 0.21 mL of liquid, what what is mass be
Answer:
The answer is 3.36 gExplanation:
The mass of a substance when given the density and volume can be found by using the formula
mass = Density × volumeFrom the question
volume of liquid = 0.21 mL
density = 16 g/mL
The mass of the liquid is
mass = 0.21 × 16
We have the final answer as
3.36 gHope this helps you
Can someone please help?
Answer:
b) c2h2
Explanation:
PLEASE HELP ASAP WILL GIVE BRAINLIEST!!!
what is the volume of a rock in cubic cm (cm3^) with a mass of 156g and a known density of 1.93 g/cm3^
Answer:
301.08 cm^3
Explanation:
v=m×d
156g×1.93g/cm^3
Answer:
The answer is 301.08
Explanation
I hope this helps! I know this is the right answer I took the test! Can I get brainliest?
Which of the following is true?
O The exact position of an electron can be known.
O Electron clouds have the same energy levels.
O Electrons in a cloud have probable locations.
O Electrons are positively charged.
Answer:
B. O The electron cloud have the same energy levels.
Express the number 4.80x10-1 in standard form
A badger is running at a speed of 1 m/s. If the badger moves that was for 2600 seconds, how far will the badger travel?
Answer:
[tex]d=2600m[/tex]
Explanation:
Hello,
In this case, since the velocity is computed via the distance divided by the elapsed time:
[tex]v=\frac{d}{t}[/tex]
We can easily compute the how far it will travel as shown below:
[tex]d=v*t=1m/s*2600s\\\\d=2600m[/tex]
Best regards.
Mass of 500g and volume of 2500 cm3 what is the destiny
Answer:
The answer is
0.2 g/cm³Explanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\[/tex]
From the question
mass = 500 g
volume = 2500 cm³
The density is
[tex]density = \frac{500}{2500} = \frac{5}{25} = \frac{1}{5} \\ [/tex]
We have the final answer as
0.2 g/cm³Hope this helps you
Dmitri Mendeleev and Henry Moseley developed their periodic tables about forty years apart. During that time, many discoveries in chemistry were made. Which fact was most likely discovered between the time of Mendeleev’s table and the time of Moseley’s table that helped Moseley develop his version? Atomic mass is the average mass of different samples of the same element. Different elements can have similar chemical properties even if their atomic masses are different. The number of protons in an atom is different than the atom’s total mass. Protons strongly affect an element’s atomic mass, while the electrons in atoms do not.
Answer:
The first one I think
Explanation:
Answer:
Its C
Explanation:
What is the formula for finding the density of
an object?
Answer:
density = Mass / Volume
Explanation:
The definition of density of a substance is "the mass of the substance per unit of volume"
Which involves a quotient of the mass of the sample substance you have divided the volume it occupies, via the formula:
Density = Mass divided Volume = Mass / Volume
The formula for finding the density of an object is Density = Mass/volume.
Density is a physical property that measures the amount of mass per unit volume of a substance. It describes how compact or concentrated a substance is. Mathematically, density is calculated by dividing the mass of an object or substance by its volume.
Density is typically expressed in units such as grams per cubic centimeter (g/cm³) or kilograms per cubic meter (kg/m³), depending on the units used for mass and volume. It can vary depending on its composition and temperature. Different substances have different densities.
Learn more about density, here:
brainly.com/question/29775886
#SPJ6
A basic solution contains an excess of H^+ ions.
O True
O False
Answer:
true
Explanation:
Yes basic solutions also have H+ ions.
While running, leg muscles work to move leg bones, and the skin helps to
Answer:regulating body temperature
Explanation:
When liquid gold becomes a solid, its particles get closer together. Which best describes what happened to the gold?
the conservation of magnetism
the change in solubility in a physical change
the change in melting point in a physical change
the rearrangement of particles in a physical change
Answer:
The rearrangement of particles in a physical change
Explanation:
Hello.
In this case, since phase transitions are physical changes in which the molecules of a substance in any phase rearrange in order to form another phase of the same substance, we can see that for gold when passing from liquid to solid, which is a process called freezing, the initial liquid gold has the particles not-so-close but also not-so-far to each other with a messy arrangement with lack of order as well but the final solid gold has a very organized network of particles, we can infer that the best statement describing such change is the rearrangement of particles in a physical change. You can verify the particles arrangement on the attached picture.
Best regards.
Answer:
yes d is the answer
Explanation:
