Answer:
Period = 5 seconds
Frequency = 0.2 Hz
Explanation:
The period is the time per cycle. So, if a wave hits the beach every 5 seconds, the period will be 5 seconds.
Additionally, the frequency is the inverse of the period, so the frequency of the waves can be calculated as:
[tex]\text{frequency = }\frac{1}{Period}=\frac{1}{5}=0.2\text{ Hz}[/tex]So, the answers are:
Period = 5 seconds
Frequency = 0.2 Hz
Please help me with this!
The balloon goes 25 m east in first 10 s.
Then the wind blows the balloon 35 m west in 8 s.
a
The balloon travels 25 m in 10s.
b
the balloon travels a distance 35 m in next 8 s.
c
thhe total distance travelled by the balloon is,
[tex]\begin{gathered} d=25+35 \\ =60\text{ m} \end{gathered}[/tex]d
Average speed in 10 s is,
[tex]\begin{gathered} s=\frac{25}{10} \\ =2.5\text{ m/s} \end{gathered}[/tex]e
The average speed in next 8 s is,
[tex]\begin{gathered} s_8=\frac{35}{8} \\ =4.37\text{ m/s} \end{gathered}[/tex]f
the average speed for the entire trip is,
[tex]\begin{gathered} s_{av}=\frac{25+35}{10+8} \\ =3.33\text{ m/s} \end{gathered}[/tex]g
displacement during the first 10 s is.
[tex]d_1=(25m)\hat{i}[/tex]h.
displacement during next 8 s is,
[tex]d_2=(-35m)\hat{i}[/tex]i
The total displacement is,
[tex]\begin{gathered} d_1+d_2=(25-35)\hat{i}_{} \\ =-(10m)\hat{i} \end{gathered}[/tex]j
the average velocity in 10 s is,
[tex]\begin{gathered} v_1=\frac{25m}{10}\hat{i} \\ =(2.5m)\hat{i} \end{gathered}[/tex]k
The average velocity in 8 s is,
[tex]\begin{gathered} v_2=\frac{-35\text{ m}}{8\text{ s}}\hat{i} \\ =-(4.37m)\hat{i} \end{gathered}[/tex]l
The average velocity entire the whole trip is,
[tex]\begin{gathered} v_{av}=\frac{d_1+d_2}{18} \\ =\frac{-10m\hat{i}}{18\text{ s}} \\ =-(0.55\hat{m/s)i} \end{gathered}[/tex]In a lightning discharge, 45 C of charge move through a potential difference of 1.0 x108 V in 0.030 s.A. What is the current of the lightning strike?B. How much energy is released by the lightning bolt?
Given:
Charge, Q = 45 C
Potential difference, V = 1.0 x 10⁸ V
Time, t = 0.030 s
Let's solve for the following:
• (A). What is the current of the lightning strike?
To find the current, apply the formula:
[tex]I=\frac{Q}{t}[/tex]Where:
I si the current
Q is the charge = 45 C
t is the time = 0.030 s
Thus, we have:
[tex]\begin{gathered} I=\frac{45}{0.030} \\ \\ I=1500\text{ A} \end{gathered}[/tex]Therefore, the current of the lightning strike is 1500 Amperes.
• (B). How much energy is released by the lightning bolt?
To find the amount of energy released, apply the formula:
[tex]E=V\times Q[/tex]where:
E is the Energy released
V is the potential difference, V = 1.0 x 10⁸ V
Q is the charge = 45 C
Thus, we have:
[tex]\begin{gathered} E=1.0\times10^8\ast45 \\ \\ E=4.5\times10^9\text{ J} \end{gathered}[/tex]Therefore, the energy released is 4.5 x 10⁹ Joules.
ANSWER:
(a). 1500 A
(b). 4.5 x 10⁹ J
how far will you go (km) in 3 min traveling 60 km/hr?
We will have the following:
First, we transform minutes to hours, that is:
[tex]3\min \cdot\frac{1h}{60\min }=0.05h[/tex]Now, we determine the distance traveled:
[tex]d=(60km/h)(0.05h)\Rightarrow d=3km[/tex]So, you will go 3km.
A rock sample has a mass of 6 kg and a volume of 0.002 m3. Calculate the density of this rock sample.
The density of the rock sample is 3000 kg/m³.
Density is an important property of matter because it can be used to determine the weight of an object. For example, if you know the density of a rock sample and its volume, you can calculate its weight by multiplying the density by the volume. Density can also be used to determine the composition of a material. For example, if you know the densities of different materials, you can identify the material of a rock sample by measuring its density.
Density is a measure of how much mass is contained in a given volume.. The calculation of the density of the rock sample:
Density = Mass / Volume
Density = 6 kg / 0.002 m³
Density = 3000 kg/m³
As a result, the rock sample has a density of 3000 kg/m³.
To know more about the Density, here
https://brainly.com/question/32293567
#SPJ2
i am not sure the best way to solve this problem
ANSWER
14.11 s
EXPLANATION
We know that in total, the runner will run a distance of 100m. He runs at constant acceleration for a while and then his velocity gets constant until the end of the track - this means that in the last part, his acceleration is zero.
So we have two parts:
For the first part, we have the acceleration and time. If we set that the initial position is zero, as shown in the diagram above, and that the runner starts from rest - therefore, his initial velocity is zero - we can find the distance of the first part of the path, which we'll call x1:
[tex]x_1=x_0+v_0t+\frac{1}{2}at^2[/tex]Since x0 and v0 are both zero, then those terms get cancelled:
[tex]x_1=\frac{1}{2}\cdot a\cdot t^2=\frac{1}{2}\cdot1.5\cdot6^2=27m[/tex]So the first part of the track, where the runner is speeding up, has a distance of 27m. Therefore, the rest of the track where the runner runs at constant acceleration is:
[tex]100-27=73[/tex]73m.
We want to find the time it took the runner to run the whole 100m. We know that he did the first part in 6 seconds. To find the time of the second part, we can use the distance we just found. Let's call it xf:
[tex]x_f-x_1=\frac{1}{2}at^2+v_0t[/tex]We know that the acceleration in this part of the track is zero and the initial velocity for this part is the velocity the runner had when he reached 6 seconds - i.e. 27m:
[tex]73m=v_1\cdot t[/tex]We don't know the time and we don't know the velocity, but we can find the second one using the formula for velocity for the first part of the track with t = 6s:
[tex]\begin{gathered} v_1=a\cdot t+v_0 \\ v_1=1.5\cdot6 \\ v_1=9m/s \end{gathered}[/tex]Now we can find the time for the second part of the track:
[tex]\begin{gathered} 73m=9m/s\cdot t \\ t=\frac{73m}{9m/s} \\ t\approx8.11s \end{gathered}[/tex]Therefore, the total time it took the runner to run 100m was:
[tex]\begin{gathered} t=6s+8.11s \\ t=14.11s \end{gathered}[/tex]14.11 s
What is the kinetic energy of a 2.0 kg object moving at 5 m/s?
Let's put the given values into the formula below and get the result;
[tex]K.E=\frac{1}{2}mv^2[/tex]We know the numerical value of speed. We also know the mass. We can jump straight to the conclusion.
[tex]K.E=\frac{1}{2}(2kg)(5m/s)^2[/tex][tex]=\frac{1}{2}(2kg)(25m^2/s^2)[/tex][tex]=25m^2/s^2=25J[/tex]The Kinetic Energy is 25J.
If we want to accelerate an object, we must apply force on it, after applying Force some work has to be done in which energy should be transferred to the object. The energy is known as kinetic energy. The kinetic energy always depends on the mass and the velocity. It is denoted as K and the Si unit is Joules (J).
To calculate the Kinetic Energy,
K= 1/2 mv^2
m = mass
v = velocity
K = kinetic energy
In solving the above equation,
K = 1/2 x2 x 5^2
K = 5x5
K = 25
The Kinetic Energy is 25J.
To learn about Kinetic Energy:
https://brainly.com/question/26472013
People weigh less on the moon than on the Earth because:the moon is smaller and has less gravity to pull on you.the Earth has less gravity than the Moon.people weigh the same on the moon as they do on Earth.the moon is magnetized.
Given
People weigh less on the moon than on the Earth
To find
The correct reason for the given statement
Explanation
The moon has much lesser mass than that of the earth. It is also just 60 percent as dense as the earth. So the gravitational pull on the moon is less than on the earth and thus people weigh less on the moon
Conclusion
The correct reason is
the moon is smaller and has less gravity to pull on you.
A projectile is fired at an upward angle of 55.0 ∘ from the top of a 155 m cliff with a speed of 165 m/s .
a)What will be its speed when it strikes the ground below? (Use conservation of energy and neglect air resistance.)
A projectile is fired at an upward angle and the speed of the object when it strikes the ground below will be 434.5 m/s.
What is Projectile motion?A projectile is an object or particle that is thrown toward the surface of the Earth and moves along a curved route only under the influence of gravity. Galileo demonstrated that this curving path was a parabola, but in the unique situation where it is hurled straight up, it may also be a straight line.
According to the question,
[tex]h=v_0_yt+1/2gt^2[/tex]
-155 m = (165 × sin 55°)t - 0.5(9.8)t²
-155 = 135.16t - 4.9 t²
4.9 t² - 135.16t - 155 = 0
t = 27.5 seconds.
Now, the speed of the object when it strikes the ground will be,
[tex]v_f=v_i+gt[/tex]
= 165 + (9.8)(27.5)
[tex]v_f[/tex] = 434.5 m/s.
To get more information about Projectile :
https://brainly.com/question/11422992
#SPJ1
The pressure is greater at the bottom of the bucket filled with water ,why?
What is the frequency of a photon of EMR with a wavelength of 2.55x10*³m?1.18x1011 Hz8.50x10 12 Hz7.65x105 Hz1.18x105 Hz
In order to solve this equation, we will need to use the formula
[tex]f=\frac{c}{\lambda}[/tex]where f = frequency, c is the speed of light and lamda is wavelength
c = 3x10^8 m/s
lamda = 2.55x10^-3 m
f = (3x10^8)/(2.55x10^-3) = 1.18x10^11 1/s
It is not possible to derive an equation of motion for uniform acceleration without a time variable. Is this true or false?
The third equation of motion is given as,
[tex]v^2=u^2+2as[/tex]Here, v is the final velocity, u is the initial velocity, a is the acceleration and s is displacement.
The expression for the acceleration is given as,
[tex]a=\frac{v^2-u^2}{2s}[/tex]In the above expression, the acceleration of the body is not a function of the time variable. Therefore, it is possible to derive an equation of motion for uniform acceleration without a time variable. Hence, the given statement is false.
The role or purpose of the battery in a circuit is to ____. Choose three.Group of answer choicesa) supply electric charge so that a current can existb) supply energy to the chargec) move the charge from the - to the + terminal of the batteryd) transform energy from electrical energy into light energye) establish an electric potential difference between the + and - terminalsf) replenish the charge which is lost in the light bulbg) offer resistance to the flow of charge so that the light bulb can get hot
Given:
The battery is connected to a circuit.
To find:
The purpose of the battery in the circuit
Explanation:
A battery is a source of energy in a circuit. The battery provides a push or a voltage to get the current flowing in a circuit.
Hence, the purposes are
b) supply energy to the charge
e) establish an electric potential difference between the + and - terminals
f) replenish the charge which is lost in the light bulb
A motorcycle has a constant acceleration of 3.74 m/s2. Both the velocity and acceleration of the motorcycle point in the same direction. How much time is required for the motorcycle to change its speed from (a)21.5 to 31.5 m/s, and (b)51.5 to 61.5 m/s?(a)Number ______ Units_________(b)Number ______ Units_________
Since the acceleration is constant we know that it is given by:
[tex]a=\frac{v_f-v_0}{t}[/tex]from where we have that:
[tex]t=\frac{v_f-v_0}{a}[/tex]once we have this equation we can determine the time by plugging the values of the acceleration and velocities.
a)
In this case we have that:
[tex]t=\frac{31.5-21.5}{3.74}=2.67[/tex]Therefore it takes 2.67 s.
b)
In this case we have that:
[tex]t=\frac{61.5-51.5}{3.74}=2.67[/tex]Therefore it takes 2.67 s.
A plane's average speed between 2 cities is 800 km/hr. If the trip takes 4.5 hours howfar does the plane fly?
Considering the average velocity can be written as:
[tex]v=\frac{\Delta s}{\Delta t}[/tex]We can isolate the distance, and we get:
[tex]\Delta s=v*\Delta t\rightarrow\Delta s=800*4.5=3600km[/tex]Then, the distance the plane flew is 3600km
A sample of unknown material weight 900N In air and and 400N when submerged in an alcohol solution with a density of 0.7 g/cm³.What is the density of the material ?
1.26 g/cm³
ExplanationStep 1
given
[tex]\begin{gathered} F_{g(air)}=900\text{ N} \\ F_{g(alchodol)}=400\text{ N} \\ \rho_{alcohol}=0.7\text{ }\frac{g}{cm^3} \end{gathered}[/tex]unknown; the density of the material, so
[tex]\begin{gathered} F_B=F_{g(air)}-F_{g(alcohol)} \\ F_B=900\text{ N-400 N=500 N} \end{gathered}[/tex]so, the proportion is
the ratio of the force equals the ratio of the density ,so
[tex]\begin{gathered} \frac{F_{g(air)}}{F_B}=\frac{\rho_{material}}{\rho_{alcholol}} \\ replace \\ \frac{900\text{ N}}{500\text{ N}}=\frac{\rho_{material}}{0.7\text{ }\frac{g}{cm^3}} \\ mutliply\text{ both sides by 0.7}\frac{g}{cm^3} \\ \frac{900\text{N}}{500\text{N}}*0.7\text{ }\frac{g}{cm^3}=\frac{\rho_{mater\imaginaryI al}}{0.7\text{\frac{g}{cm^{3}}}}*0.7\frac{g}{cm^3} \\ 1.26\frac{g}{cm^3}=\text{ density of the material } \\ \end{gathered}[/tex]so, the density of the material is
1.26 g/cm³
I hope this helps you
Derek leaves his physics book on top of a drafting table that is inclined at a 35° angle. The table exerts a force on the book of 18 Newtons, and the force of gravity is 22 Newtons. If the Force of friction acting on the book is 11 Newtons, what is the Net Force on the book?
The net force on the book is equal to 1.61 N.
What is the net force?The net force on the object can be defined as the vector sum of all the forces together. Net force becomes resultant force and shows the same effect on the rotational motion as all actual forces.
Given, the angle of the book with the table, α = 35°
The force of friction, f = 11N
The normal force acting on the book, N = 18N
The force of gravity, W = 22 N
The net force along the table is F₁ = Wsinα - f
F₁= 22× sin35° - 11
F₁ = 1.6 N
The net force perpendicular to table is F₂ = W cosα -N
F₂= 22×cos35° -18
F₂ = 0.021 N
The net force on the book is [tex]F_{net} = \sqrt{F_1^2+F_2^2}[/tex]
[tex]F_{net} = \sqrt{(1.6)^2+(0.021)^2}[/tex]
[tex]F_{net} = 1.61N[/tex]
Therefore, the net force on the book is equal to 1.61 Newtons.
Learn more about net force, here:
https://brainly.com/question/13410291
#SPJ1
If there is a source voltage of 12 volts with a 2.5 volt drop over the LED, and an intended current of 100 mA, what size resistor should be used?
Given:
A voltage source has a voltage of 12 V.
A voltage drop over the LED is 2.5 V.
The current in the circuit is 100 mA.
To find:
The resistance of the resistor should be used.
Explanation:
LED is a forward-biased PN junction that emits light. The voltage drop over the LED is 2.5 V.
The voltage source has a voltage of 12 V.
Hence, the total voltage in the circuit = 12 V - 2.5 V = 9.5 V
The resistance of the circuit in the forward biased is almost equal to zero. Let the resistance in the circuit be R.
Thus, the total resistance in the circuit = 0 + R = R
The current in the circuit is = 100 mA = 0.1 A
The resistance R of the circuit can be calculated as:
[tex]R=\frac{V}{I}[/tex]Here, V is the voltage in the circuit and I is the current in the circuit.
Substituting the values in the above equation, we get:
[tex]\begin{gathered} R=\frac{9.5\text{ V}}{0.1\text{ A}} \\ \\ R=95\text{ }\Omega \end{gathered}[/tex]Final answer:
Hence, a resistor of 95 Ω should be used in the circuit.
How long would it take to pass 700 C of charge through a toaster drawing 10 A of current? How many electrons would pass through the toaster in this time?
Given that the charge of the toaster is q =700 C
The current of the toaster is I = 10 A
We have to find the time and number of electrons.
Time can be calculated by the formula,
[tex]t=\frac{q}{I}[/tex]Substituting the values, the time will be
[tex]\begin{gathered} t=\frac{700}{10} \\ =70\text{ s} \end{gathered}[/tex]The number of electrons can be calculated by the formula,
[tex]n=\frac{q}{e}[/tex]Here, n is the number of electrons
and e is the charge of the electron whose value is
[tex]1.6\text{ }\times10^{-19}\text{ C}[/tex]Substituting the values, the number of electrons will be
[tex]\begin{gathered} n\text{ = }\frac{700}{1.6\times10^{-19}} \\ =4.375\text{ }\times10^{-17} \end{gathered}[/tex]The nearest star to the Earth (other than the Sun) is about 4.0 lightyears away. A lightyear, ly, is the distance light travels in one year. Voyager 1 is traveling at 38,500 miles per hour. How long will it take Voyager 1 to reach the nearest star in years?
First, let's convert the distance of 4 lightyears to miles:
[tex]4\text{ ly}=4\cdot5.879\cdot10^{12}\text{ miles}=23.516\cdot10^{12}\text{ miles}[/tex]Now, let's find the time required:
[tex]\begin{gathered} distance=speed\cdot time\\ \\ 23.516\cdot10^{12}=38500\cdot t\\ \\ t=\frac{23.516\cdot10^{12}}{38500}\\ \\ t=6.10805\cdot10^8\text{ hours} \end{gathered}[/tex]Then, we need to convert from hours to years:
[tex]6.10805\cdot10^8\text{ hours}=\frac{6.10805\cdot10^8}{8760}=6.97266\cdot10^4\text{ years}[/tex]Therefore it will take approximately 69727 years.
Three resistors with resistances of 9 Ω, 18 Ω, and 30 Ω are in a series circuit with a 12 volt battery. What is the total resistance of the resistors in the circuit?
When resistors are in series, the total resistance is equal to the sum of the individual resistances of each resistor. Thus, the total resistance in this circuit is 9+18+30 = 57Ω
Hey! I really need help with this question please :)
Answer: B
Explanation:
The formula for calculating the efficiency of a heat engine is expressed as
Efficiency = useful work done/Heat energy supplied x 100
From the information given,
Heat energy supplied = 500
useful work done = 50
Efficiency = 50/500 x 100
Efficiency = 10%
Draw In figure what the compass needles would show if that current is as shown in the figure. Make the arrow the “north” direction. (Please refer to picture)
The direction of the magnetic field around a current-carrying conductor is given by the right-hand thumb rule. In the figure, the direction of the flow of the current is into the plane of the paper.
Therefore the needles of the compass would align as,
In the above figure, the arrowheads indicate the north direction.
In the setup of a cart pulled by a hanging mass, without friction, we have the following information: the mass of the cart is 0.53 Kg., and the hanging mass is 0.077 Kg.
Determine the acceleration of the cart (in m/s2).
The acceleration of the cart
a=1.2431m/s^2
What is acceleration?Generally, The equation for Newton's second law of motion is
2nd law of motion,
Fnet=m a
on hanging mass,
m_1 g-T=m_1 a
m_1 g-m_2 a=m_1 a
Acceleration, [tex]$a=\frac{m_1 g}{m_1+m_2}$[/tex]
[tex]&a=\frac{0.077 \mathrm{~kg} \times 9.8 \mathrm{~m} / \mathrm{s}^2}{0.077 \mathrm{~kg}+0.53 \mathrm{~kg}} \\[/tex]
a=1.2431m/s^2
Read more about Acceleration
https://brainly.com/question/12550364
#SPJ1
Round the answer for each problem to the correct number of significant figures.
a. (7.31 × 104) + (3.23 × 103)
b. (8.54 × 10–3) – (3.41 × 10–4)
c. 4.35 dm × 2.34 dm × 7.35 dm
d. 4.78 cm + 3.218 cm + 5.82 cm
e. 38,736 km ÷ 4784 km
After solving each problem to correct the number of significant figures :
(a) 76330
(b) 8199 × 10⁻³
(c) 74.81 dm.
(d) 13.8 cm
(e) 8.09 km
What is an Equation?Equations are mathematical expressions that have two algebraic expressions on either side of an equals (=) sign. The expressions on the left and right are shown to be equal to one another, demonstrating this relationship. L.H.S. = R.H.S. (left hand side = right hand side) is a fundamental mathematical formula.
According to the question,
(a) (7.31 × 10⁴) + (3.23 × 10³)
(73100) + (3230) = 76330
(b) (8.54 × 10⁻³) – (3.41 × 10⁻⁴)
= 8199 × 10⁻³
(c) 4.35 dm × 2.34 dm × 7.35 dm
= 74.81 dm.
(d) 4.78 cm+3.218 cm+5.82 cm
= 13.8 cm
(e) 38,736 km ÷ 4784 km
= 8.09 km
To get more information about Equation :
https://brainly.com/question/10413253
#SPJ1
Convert 500BTU/ft.s.F to g.cal/cm^2.s.°C
The requirement of the prompt is for 500 British Thermal Units /Calories (Cal) to be converted to Gram Calories. Hence, 500 BTU (cal) = 126,082cm²
What is a British Thermal Unit?A British thermal unit is a heat unit defined as the amount of heat needed to raise the temperature of one pound of water by one degree Fahrenheit. It is also one of the customary units used in the United States.
To covert 500 BTU, one must note that according to established scientific metrics.:
1 BTU = 252.164 Gram (Cal).
Hence,
500 BTU = 252.164 x 500
= 126,082 cm²
Learn more about BTU:
https://brainly.com/question/14252954
#SPJ1
Two children are riding on a merry-go-round. Child A is at a greater distance from the axis of rotation than child B. Which child hasthe larger linear displacement?Select one:a. There is not enough information given to answer the question.b. Child Ac. They have the same non-zero linear displacementd. Child Be. They have the same zero linear displacement.
The linear displacement in a rotation is given by:
[tex]s=r\theta[/tex]where r is the distance from the axis of rotation and theta is the angular displacement.
Since the linear displacement is proportional to the radius we conclude that child A has a larger linear displacement.
my choice1A child pushes a toy truck up an inclined plane. The lifting force is...Select one:ut ofO a. the weight of the truck.O b. the length of the inclined plane.O c. the force the child uses to push the truck.uestionO d. equal to the total amount of work done.
When pushing a toy truck up an inclined plane, the force that makes the truck goes up is the force that the child uses to push the truck. (The force that pushes
Therefore the correct option is C.
A person is running at a velocity vv. By which factor would they need to increase their speed in order to double their kinetic energy?
The kinetic energy is given by:
[tex]K=\frac{1}{2}mv^2[/tex]If we want to double it then we have:
[tex]2(\frac{1}{2}mv^2)=\frac{1}{2}m(\sqrt[]{2}v)^2[/tex]Therefore the speed has to increas by a factor of square root of 2
Ultraviolet light has shorter wavelengths and higherfrequencies than visible light.TRUEFALSE
Ultraviolet light has shorter wavelengths and higher frequencies than visible light.
The answer is TRUE
Suppose you stand with one foot on ceramic flooring and one foot on a wool carpet,
making contact over an area of 80.0cm2 with each foot. Both the ceramic and the
carpet are 2.00 cm thick and are 10.0ºC on their bottom sides. At what rate must
heat transfer occurs from each foot to keep the top of the ceramic and carpet at
33.0ºC?
The rate of heat transfer from each foot to keep the top of the ceramic and carpet at the desired temperature is 27.6 J/s.
What is thermal heat transfer?
Thermal heat transfer is defined as the movement of heat across the border of the system due to a difference in temperature between the system and its surroundings.
The rate at which heat transfer occurs from each foot to keep the top of the ceramic and carpet at the given temperature is calculated as follows;
Q/t = kA(T₂ - T₁)/d
where;
Q/t is the rate of heat transfer
k is heat transfer coefficientT₂ is the final temperatureT₁ is the initial temperatured is the distance between the wool and ceramics
The heat transfer coefficient of human skin = 0.3 W / m⁰C
Area = 80 cm² = 0.008 m²
thickness, d = 2 cm = 0.02 m
change in temperature, = 33⁰ C - 10 ⁰C = 23 ⁰C
Q/t = (0.3 x 0.008 x 23) / (0.002)
Q/t = 27.6 W = 27.6 J/s
Thus, the rate of heat transfer from each foot to keep the top of the ceramic and carpet at the desired temperature is 27.6 J/s.
Learn more about heat transfer here: https://brainly.com/question/16055406
#SPJ1
