please help!! i need it right now
this is your correct answer mark me brainest
An ecosystem is made up of the interaction of all organisms in an area with all nonliving things. Organisms are living things like animals, plants, and microbes. Nonliving things include water, dirt, rocks and the sun. The living things are called biotic components and the nonliving things are called abiotic components.
There are a few different types of biotic components. Producers are living things that use a process called photosynthesis, which turns the sun's energy, water and carbon dioxide into fuel. Producers form the molecules that are the basis for all life on Earth, including plants, algae and some bacteria.
Consumers are animals that get their energy from eating other plants and animals. Decomposers are organisms that break down animal and plant material to make nutrients available. Examples of decomposers are bacteria, fungi and insects.
Abiotic components include temperature, sunlight, water, wind and minerals.
.
Write a short paragraph that explains the central idea of the article. Use at least two details from the article to support your response.
Answer:
All species in a given region interact with all nonliving objects to form an ecosystem. Animals, plants, and bacteria are examples of living organisms. Water, soil, rocks, and the sun are all nonliving objects. Biotic components are living organisms, while abiotic components are nonliving organisms.
Biotic components come in a variety of shapes and sizes. Producers are living entities that convert the sun's energy, water, and carbon dioxide into fuel through a process called photosynthesis. Producers create the compounds that underpin all life on Earth, including plants, algae, and bacteria.
I rephrased this...
Using correct significant figures, calculate the length of one side of a cube made of gold, if the mass of the cube is 4.05 g and the density of gold is 19.32 g/cm3
Answer:
Explanation:
density = 19.32
Mass = 4.05 g
V = ?
Formula
Density = mass / volume or
volume = mass / density.
Solution
volume = mass / volume
volume = 4.05 / 19.32
Volume = 2.10
The solid cube has a side length of ∛V which reads as the cube root of volume.
Side Length = ∛2.10 = 0.594 cm
Describe in detail an experiment using only hot and cold water that would enable you to
verify that the heat capacity of your coffee-cup calorimeter is about 1.0 x 10' J/°C. Be
specific about the procedure you would follow and the calculations you would need to
perform?
Based on the principle of conservation of energy, the heat capacity of the calorimeter is calculated using the formula:
c = {m2 × w × (t2 - t1) - m2 × w × (t2 -t1)}/m3 × (t2 -t1)What is a calorimeter?A calorimeter is an equipment used to determine heat of reaction.
The calorimeter works on the principle of conservation of energy:
heat gained = heat lostQuantity of heat energy is calculated using the formula below:
q = mass × heat capacity × temperature differenceIn the experiment, the following procedure is followed:
Mass of the hot water, cold water and calorimeter are recorded temperature of the hot water is recordedtemperature of the the cold water and calorimeter is recorded final temperature of the mixture is recorded heat capacity of the calorimeter is calculated using the formula: heat gained by calorimeter and cold water = heat lost by hot water.Assuming that;
mass of hot water = m1 mass of cold water =m2mass of calorimeter = m3initial temperature cold water and calorimeter = t1final temperature of mixture = t2heat capacity of water = wheat capacity of calorimeter = cTherefore, the heat capacity of the calorimeter is calculated using the formula:
c = {m2 × w × (t2 - t1) - m2 × w × (t2 -t1)}/m3 × (t2 -t1)Learn more about calorimeters at: https://brainly.com/question/1407669
5. A sample of carbon dioxide (CO2) has a mass of 52.0 g.
a. How many carbon atoms are present?
Answer:
52.0 gof CO2 contains 7.1 *10^23 molecules
1 molecule of CO2 has a mass of 7.3*10^-23 grams
Explanation:
Step 1: Data given
Mass of CO2 = 52.0 grams
Molar mass of CO2 = 44.01 g/mol
Number of Avogadro = 6.022 * 10^23 / mol
Step 2: Calculate moles of CO2
Moles CO2 = Mass CO2 / molar mass CO2
Moles CO2 = 52.0 grams / 44.01 g/mol
Moles CO2 = 1.18 moles
Step 3: Calculate molecules in 1.18 moles CO2
Number of molecules = 1.18 moles * 6.022*10^23 = 7.1 *10^23 molecules
1 molecule of CO2
Number of moles = 1 / 6.022*10^23
Number of moles = 1.66 *10^-24
Mass CO2 = 1.66*10^-24 moles * 44.01 g/mol
Mass CO2 = 7.3*10^-23 grams
6. If 2.6g of Lif dissolves and warms 25mL of water by 4.7°C, what
is the enthalpy of solution in kJ/mol? (Specific heat capacity of
water = 4.186J/mL/K)
Answer:
The idea here is that you can use the heat absorbed by the solution to find the heat given off by the dissolution of the salt.
More specifically, you can assume that
Δ
H
diss
=
−
q
solution
The minus sign is used here because heat lost carries a negative sign.
To find the heat absorbed by the solution, you can use the equation
q
=
m
⋅
c
⋅
Δ
T
−−−−−−−−−−−−−
Here
q
is the heat gained by the water
m
is the mass of the water
c
is the specific heat of water
Δ
T
is the change in temperature, defined as the difference between the final temperature and the initial temperature of the sample
As the problem suggests, you can approximate the mass and the specific heat of the solution to be equal to those of the pure water sample.
The temperature increases by
0.121
∘
C
, so you know that
Δ
T
=
0.121
∘
C
→
positive because the final temperature is higher than the initial temperature
Plug in your values to find
q
=
125
g
⋅
4.18 J
g
−
1
∘
C
−
1
⋅
0.121
∘
C
q
=
63.22 J
So, you know that the solution absorbed
63.22 J
, which implies that the dissolution of the salt gave off
63.22 J
. In other words, you have
Δ
H
diss
=
−
63.22 J
Convert the mass of sodium hydroxide to moles by using the compound's molar mass
2.4
⋅
10
−
4
g
⋅
1 mole NaOH
39.997
g
=
6.00
⋅
10
−
6
moles NaOH
You know that the enthalpy of dissolution when
6.00
⋅
10
−
6
moles of sodium hydroxide are dissolved in water, so use this info to find the enthalpy of dissolution when
1
mole of the salt dissolves
1
mole NaOH
⋅
−
63.22 J
6.00
⋅
10
−
6
moles NaOH
=
−
1.054
⋅
10
7
J
Finally, convert this to kilojoules
1.054
⋅
10
7
J
⋅
1 kJ
10
3
J
=
1.054
⋅
10
4
kJ
Therefore, you can say that the enthalpy of dissolution, or molar enthalpy of dissolution, for sodium hydroxide is
Δ
H
diss
=
−
1.1
⋅
10
4
.
kJ mol
−
1
−−−−−−−−−−−−−−−−−−−−−−−−−−−
The answer is rounded to two sig figs, the number fo sig figs you have for the mass of sodium hydroxide.
SIDE NOTE The accepted value for the enthalpy of dissolution of sodium hydroxide in water at
25
∘
C
is
Δ
H
diss
=
−
44.51 kJ
Explanation:
i hope its right
Hiya if you answr more than 5 = extra points please answer and least 3 lol and maybe explain how i can do it
Answer:
copy and paste them into the search and all of the answers come up trust me
Explanation:
Which of the following is considered a Green House Gas?
Answer:
Greenhouse gases (GHG) include carbon dioxide, water vapor, methane, ozone, nitrous oxide and fluorinated gases. These molecules in our atmosphere are called greenhouse gases because they absorb heat.
Explanation:
How do gas molecules move?
a. in an orderly fashion
c. in constant and random motion
b. taking steps and jumping
d. in circular motion
GAS :P
Draa
Answer:
in constant and random motion
Explanation:
As the gas molecules collide with the walls of a container, the molecules impart momentum to the walls, producing a force that can be measured. ... The molecules are in constant random motion, and there is an energy (mass x square of the velocity) associated with that motion.
What human activities may be causing CCD
Explanation:
Varroa mites, viruses, and European foulbrood
Answer:
CCD is likely to result from a combination of pathogens, such as Varroa mites, viruses and European foulbrood: issues related to nutrition, such as undernourished or malnourishment
Given the balanced equation with an unknown compound represented by X:
Which compound is represented by x ?
Answer:
CH3CH2OH
Explanation:
The reactant has:
- 6 carbon atoms
- 12 hydrogen atoms
- 6 oxygen atoms
The second product has:
- 4 oxygen atoms
- 2 carbon atoms
In 2CH3CH2OH there are:
- 4 carbon atoms
- 12 hydrogen atoms
- 2 oxygen atoms
If you combine the number of atoms of each chemical species of both 2CH3CH2OH and the second product, you will see that you get the same number of atoms of each chemical species in the reactant:
carbon = 2 + 4 = 6 (number of carbon atoms in reactant)
oxygen = 4 + 2 = 6 (number of oxygen atoms in reactant)
hydrogen = 0 + 12 = 12 (number of hydrogen atoms in reactant)
This means that no atoms were created or destroyed which is true for all equations. If this was done with one of the other compounds listed, atoms would have been created or destroyed which cannot happen. In all equations, atoms are never created or destroyed, however they do rearrange to form new products.
The carbon dioxide gas that was generated during this reaction was collected at 295K and 125 kPa. If 43.2 L of carbon dioxidegas was collected, how many grams of glucose (molar mass 180.155 g/mol) were used in this reaction?
Answer:
The balanced equation for this reaction is C2H2 + 502 + 4H2O + 3C02. What volume of carbon dioxide is produced when 2.8 L of oxygen are consumed? 25Explanation:
11.
Which statement are TRUE about protons.
a they have a positive charge
b they have a mass over 1800 times greater
than the mass of an electron
they were the first subatomic particles to be
С
discovered
d they repel electrons
Answer:
hoping this is a 2 mark answer a,b
Explanation:
electrons were the first subatomic particle to be discovered
protons + proton = repel
proton + electron = attract
All the objects in the force diagrams shown below have the same mass.
Which of the force diagrams would result in the greatest change in speed?
I need help asap
Answer:
do u know what the answer is yet
Explanation:
why organic chemistry is based on carbon?
Answer:
Life is based on carbon; organic chemistry studies compounds in which carbon is a central element. The properties of carbon make it the backbone of the organic molecules which form living matter. Carbon is a such a versatile element because it can form four covalent bonds.
Explanation:
brainliest pls
Organic chemistry is based on carbon because the property of carbon catenation is tetravalent due to which most of the organic compounds are carbon compounds.
Why is organic chemistry called carbon chemistry?Organic chemistry is the branch of chemistry that studies carbonic compounds or organic compounds, which are those formed by carbon atoms. In short, organic chemistry is the study of carbon compounds.
The answer is based on the way carbon combines with other chemical elements to form molecules. For example, hydrogen atoms only bond to one atom, oxygen to two atoms. Carbon is a particularly versatile chemical element, as it can bond with four atoms at once.
See more about carbon at brainly.com/question/22530423
What is the purpose of the ice?
Answer:
Ice act and help in condensation of the vapor
Explanation:
The energy released when gaseous water vapor condenses to form liquid water droplets is called latent heat. Latent heat from condensation causes an increase in air temperature surrounding the water droplets. The warmer air rises, causing the water vapor to condense when it meets cooler air at a higher altitude
Hydrazine (N 2 H 4 )) a rocket fuel reacts with oxygen to form nitrogen gas and water vapor . The reaction is represented with the equation: N 2 H 4 (l)+O 2 (g)—> N 2 (g)+2H 2O(g)
How many grams are needed to produce 96.0g water?
A.) 32.0g N2H4
B.) 48.0g N2H4
C.) 85.4g N2H4
D.) 192.2g N2H4
The mass of hydrazine (N₂H₄) required to produce 96 g of water (H₂O) is 85.4 g (Option C)
Balanced equationN₂H₄ + O₂ —> N₂ + 2H₂O
Molar mass of N₂H₄ = (2×14) + (4×1) = 32 g/mol
Mass of N₂H₄ from the balanced equation = 1 × 32 = 32 g
Molar mass of H₂O = (2×1) + 16 = 18 g/mol
Mass of H₂O from the balanced equation = 2 × 18 = 36 g
SUMMARY
From the balanced equation above,
36 g of H₂O were produced by 32 g of N₂H₄
How to determine the mass of N₂H₄From the balanced equation above,
36 g of H₂O were produced by 32 g of N₂H₄
Therefore,
96 g of H₂O will be produced by = (96 × 32) / 36 = 85.4 g of N₂H₄
Thus, 85.4 g of N₂H₄ is needed for the reaction
Learn more about stoichiometry:
https://brainly.com/question/14735801
What is the meaning of bezene
Answer:
Benzene is an organic chemical compound with the molecular formula C₆H₆. The benzene molecule is composed of six carbon atoms joined in a planar ring with one hydrogen atom attached to each. Because it contains only carbon and hydrogen atoms, benzene is classed as a hydrocarbon.
Describe the composition of humus and why it is an effective organic fertilizer.
Answer:
chemical fertilizers increase crop production; their overuse has hardened the soil, decreased fertility, strengthened pesticides, polluted air and water
which solution whose POH is 12
A)[H3O+] = 1×10−2 M
B)[OH−] = 1×10−2 M
C)[-OH] = 1×10−12 M
D)[H3O+] = 1×10−12 M
Answer:
d
Explanation:
H3O =1×10_12=12 ooh is 12
A solid inorganic nitrate contains 9.37% magnesium 10.93% nitrogen oxygen and 42.18% water calculate formula of a compound.
This problem is providing us with the percent composition of a compound containing magnesium, nitrogen, oxygen and water. Thus, the empirical formula is required and found to be Mg(NO₃)₂·6H₂O.
Empirical formulasIn chemistry, empirical formulas are used in order to figure out the minimum whole-number representation of a molecular formula, which contains the actual number of atoms.
Thus, we start determining it by assuming the given percentages as masses and calculating the moles with the atomic or molar mass of the involved species:
[tex]n_{Mg}=\frac{9.37}{24.3} =0.386\\\\n_{N}=\frac{10.3}{14.01}=0.735\\ \\n_O=\frac{37.52}{16.00}=2.32\\ \\n_{H_2O}=\frac{42.18}{18.02}=2.34[/tex]
Next, we divide by the 0.386 as the smallest number of moles in order to determine their subscripts in the chemical formula:
[tex]Mg}=\frac{0.386}{0.386} =1\\\\n_{N}=\frac{0.735}{0.386}=2\\\\n_O=\frac{2.32}{0.386}=6\\\\n_{H_2O}=\frac{2.34}{0.386}=6[/tex]
Hence, the empirical formula turns out to be Mg(NO₃)₂·6H₂O, which is actually a hydrate (hexahydrate).
Learn more about percent composition: brainly.com/question/12247957
Consider the following reaction.
2NO2(g)⇌N2O4(g)
When the system is at equilibrium, it contains NO2 at a pressure of 0.878 atm , and N2O4 at a pressure of 0.0771 atm . The volume of the container is then reduced to half its original volume. What is the pressure of each gas after equilibrium is reestablished?
The pressure of NO2 and N2O4 would be 1.756 atm and 0.1542 atm respectively.
Gas lawsAccording to Boyle's law, the pressure of a gas is inversely proportional to its volume at a constant temperature.
Mathematically: P1V1=P2V2
When the volume of a gas is halved at a constant temperature, the pressure is doubled. If it is the volume is doubled, the pressure would be halved.
In this case, the volume of the container is halved. Meaning that the pressure of each of the gas would be doubled by the time the equilibrium is reestablished.
Thus, NO2 would double from 0.878 atm to 1.756 atm while N2O4 will double from 0.0771 atm to 0.1542 atm
More on gas laws can be found here: https://brainly.com/question/1190311
need it for resources(duh)
Answer: Trail 2
Explanation: Because it has a pressure of 1 atm
How are different elements distinguishable from one another? (Check all that apply.)
Each has a unique chemical symbol.
Each is made of the same substance.
Each has a unique atomic number.
Each has a characteristic placement within the Periodic Table.
Which of the following best describes a neutralization reaction?
A. Acid + base =
[tex] {h}^{2} 0 + {h}^{3} {0}^{ + } [/tex]
B. Acid + base H+ + OH-
C. Acid + base salt + water
D. Acid + base metal + nonmetal
Answer: c
Explanation: just took the test and got it right
What is the gram molecular weight (GMW) of CuCl2?
The molar mass of CuCl2 is 134.452 g/mol. Each element's molar mass can be found in its designated box on the periodic table.
During science class the teacher mixed a soap solution with white liquid glue. While she was
mixing the substances, the cup began to get warm. After mixing them, the resulting substance
became thick, squishy, and stretchy. Juan says this is an example of a chemical change
Answer:
that is true
Explanation:
the chemical changed reaction
HELP ME OUT PLS!!!!!
A swimmer makes a turn at a pool wall.
Which answer choice best describes the direction the swimmer accelerates when she pushes against the wall?
A) Away from her push because the wall exerts an equal and opposite force
B) Away from her push because the wall exerts a stronger force in the same direction
C) Same direction as her push because the wall exerts an equal force in the same direction
D) Same direction as her push because the wall exerts a stronger and opposite force
Answer:
C
Explanation:
Well Its called reaction force, so that helps you figure out what direction she would go towards. When you use anything that has reaction force what way are they normally going? So thats why she stayed still.
When the light energy from sunlight hits matter, _________.
A. heat energy is formed
B. nothing happens
C. potential energy is formed
Answer:
When the light energy from sunlight hits matter, heat energy is formed
Answer:
A
Explanation:
when light energy hit matter heat energy formed
PLEASE
How many grams of hydrogen gas are created from a reaction of 72.0 g with an excess of water?
Answer:
How many grams of H2 can be produced from the reaction of 11.5 grams of sodium with an excess of water? Hint: 2Na + 2H2O ---> 2NaOH + H2. Ans: 0.505g .
Explanation:
