Answer:
29 L.
Explanation:
Hello!
In this case, considering that we are performing a conversion by which the time should be cancelled out to obtain liters, we first need to convert the seconds on bottom to hours and then the volume on top to liters, just a shown down below:
[tex]2.0\frac{mL}{s} *\frac{1L}{1000mL} *\frac{3600s}{1hr}*4.0hr\\\\=28.8L[/tex]
Which turns out 29 L with 2 significant figures.
Best regards!
A gene carries the ________ for a trait. brainpop
. A reaction in which A, B, and C react to form products is first order in A, second order in B, and zero order in C. a) Write a rate law for the reaction. b) What is the overall order of the reaction
Answer:
a) r = k × [A] × [B]²
b) 3
Explanation:
Let's consider the following generic reaction
A + B + C ⇒ Products
The generic rate law is:
r = k × [A]ᵃ × [B]ᵇ × [C]ⁿ
where
r: reaction ratek: rate constanta, b, n: reaction ordersThis reaction is first order in A, second order in B, and zero order in C. The rate law is:
r = k × [A]¹ × [B]² × [C]⁰
r = k × [A] × [B]²
The overall order of the reaction is the sum of the individual reaction orders.
1 + 2 + 0 = 3
Pls help, science 8th grade question, #11 thx :)
what is thermal energy
Answer:
Thermal energy refers to the energy contained within a system that is responsible for its temperature. Heat is the flow of thermal energy. A whole branch of physics, thermodynamics, deals with how heat is transferred between different systems and how work is done in the process (see the 1ˢᵗ law of thermodynamics).
Explanation:
Explanation:
Thermal Energy refers to the energy within a system that is responsible for it temperature etc.
fine the average acceleration of the cyclist moving from point A to point B , and over the whole trip ( from point A to point D ) .
Explanation:
Andresiaは13.1マイルの長さのレースを走っています。彼はすでに1.1マイル走っています。アンドレスが走るために残っているマイル数を再確認する
How many electrons are in an atom with the electron
configuration of 1s 2s 2p 3s!?
Answer:
11
Explanation:
electronic configuration = 1s^2, 2s^2, 2p^6, 3s^1
therefore total electrons = 2+2+6+1 = 11
Hope it helps youu 。◕‿◕。
A scooter maintains a pace of 1.45 minutes per mile, with fuel economy of 85 miles per gallon. How many seconds can it travel on 145 mL of fuel under these conditions
Answer:
281s
Explanation:
Given parameters:
Speed of the scooter = 1.45min per mile
Fuel economy of engine = 85miles per gallon
Quantity of fuel = 145mL
Unknown:
Time of travel with the volume of fuel given = ?
Solution:
To solve this problem, we need to find the distance the fuel will last.
Rate of fuel consumption by the engine = 85miles per gallon
Convert 145mL to gallons;
3785.41mL = 1 gallon
145mL will therefore give [tex]\frac{145}{3785.41}[/tex] = 0.038gallons
So;
Distance covered = 85miles per gallon x 0.038gallons = 3.23miles
From;
Rate of travel = [tex]\frac{time }{distance}[/tex]
Time = rate of travel x distance = 1.45 minutes per mile x 3.23miles
Time = 4.7min
1 min = 60s
4.7min = 4.7 x 60 = 281s
Calculate the mass of 3.5 moles of H2O
63 g H₂O
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightChemistry
Atomic Structure
Reading a Periodic TableStoichiometry
Using Dimensional AnalysisExplanation:Step 1: Define
3.5 mol H₂O
Step 2: Identify Conversions
Molar Mass of H - 1.01 g/mol
Molar Mass of O - 16.00 g/mol
Molar Mass of H₂O - 2(1.01) + 16.00 = 18.02 g/mol
Step 3: Convert
Set up: [tex]\displaystyle 3.5 \ mol \ H_2O(\frac{18.02 \ g \ H_2O}{1 \ mol \ H_2O})[/tex]Divide/Multiply: [tex]\displaystyle 63.07 \ g \ H_2O[/tex]Step 4: Check
Follow sig fig rules and round. We are given 2 sig figs.
63.07 g H₂O ≈ 63 g H₂O
Two controlled variables of light?
Answer:
material of the block, the shape of the block and the color of the light
Explanation:
2. Put the following steps of scientific inquiry in order, please number 1‐3.
_______Make an observation
_______ Ask a question
_______ Form a hypothesis
Please help!!!! Really need to know this!!
The theoretical yield of NaCl : 15 mol
Further explanationGiven
15 mol Na
15 mol Cl₂
Required
The theoretical yield of NaCl
Solution
Reaction
2Na + Cl₂ ⇒ 2NaCl
A theoretical yield is the amount of product that you calculate from the reaction equation according to the product and reactant coefficients
Find limiting reactant (mol : coefficient) :
Na = 15 : 2 = 7.5
Cl₂ = 15 : 1 = 15
The limiting reactant = Na(smaller ratio)
Mol of NaCl based on mol Na as limiting reactant.
From the equation, mol ratio of Na : NaCl = 2 : 2, so mol NaCl = 15 mol
Describe the environmental impacts that are involved during the design, research and development, and marketing phases of cell phones.
Answer:
joe mama
Explanation:
400 + 20 + 420
The number of I atoms in the reactants is greater than the number in the product : True or False
There are 4 atoms of F in both the reactants and the products. True or False
The illustration represents a valid chemical transformation. True or false
Explanation:
We can summarize the reaction shown as:
2F₂ + I₂ → 2F₃I
Since I is purple
F is the green
The number of I atoms in the reactants is greater than the number in the product
False:
The number of I atoms on both side of the expression is 2
There are 4 atoms of F in both the reactants and the products.
False:
There are 4 atoms of F on the reactant side and 6 atoms of F on the product side
The illustration represents a valid chemical transformation. True or false
False
The reaction does not represent a valid chemical transformation because in a valid chemical transformation, the number of atoms on both sides of the expression must be the same.
Type the correct answer in the box. A car accelerates from 4 meters/second to 16 meters/second in 4 seconds. The car's acceleration is _
Answer:
Formula for acceleration is
V-U÷T
In the given information
V=16
U=4
T=4
Acceleration =16-4/4
=3 metre per second ^2
Explanation:
The oxidation of Cu₂O(s) to CuO(s) is an exothermic process:
2 Cu₂O(s) + O₂(g) → 4 CuO (s) ∆H = -292.0 kJ・mol⁻¹
Calculate the work done when 6.50 mol of Cu₂O(s) undergo oxidation at STP.
Answer:
w = 7376.6 J
Explanation:
To calculate the work done in the system, we need first to calculate the number of moles of all compounds.
The following expression, that comes from the 1° law of thermodynamic, will help you to get the work:
w = ΔnRT
Where:
Δn: difference in the number of moles between products and reactants
R: constant universal of gases (8.314 J / mol K)
T: Temperature in Kelvin.
As we are doing this reaction in STP, then the Pressure is 1 atm, and temperature is 0 °C or 273 K.
Now, we already have the moles of Cu₂O, let's see, according to the balanced reaction, how many moles we should have of O₂ and CuO.
If 1 mole of O₂ reacts with 2 moles of Cu₂O then 6.5 moles of Cu₂O will be:
moles O₂ = 6.5 moles Cu₂O * (1 mole O₂/2 moles Cu₂O) = 3.25 moles O₂
If 2 moles of Cu₂O produces 4 moles of CuO, then 6.5 moles will be:
moles CuO = 6.5 moles Cu₂O*(4 moles CuO/2 moles Cu₂O) = 13 moles CuO
Now that we have the moles, let's calculate the value of Δn.
Δn = moles product - moles reactants
Δn = 13 - (6.5 + 3.25) = 3.25 moles
Now, we can calculate the work done in the system:
w = 3.25 * (8.314 * 273)
w = 7376.6 J or 7.3766 kJHope this helps
1. About how many Atlantic horseshoe crabs were caught in 2017?
Answer:
994,491 were caught in 2017
Please please !!! help me I’ve been doing this for 2 hours
How many molecules of NaCl are in 0.61 moles of NaCl?
1.8 x 1023
2.5 x 1023
3.7 x 1023
4.5 x 1023
Answer:
3.7 x 10^23
is the right answer
. If 55.5 g of aluminum is heated to 95.0 °C and placed into 500.0 g of water at 30.0°C , What
is the final temperature of the system? Cp of aluminum is.900J/gºC
The final temperature of the system : 31.5 °C
Further explanationGiven
55.5 g Al, 95 C
500 g water, 30 C
C Al = 0.900 J/gºC
Required
the final temperature
Solution
Q in = Q out
Q absorbed = Q released
Q water = Q Aluminium
[tex]\tt 500\times 4.186\times (t-30)=55.5\times 0.9\times (95-t)\\\\2093t-62790=4702.5-49.5t\\\\2142.5t=67492.5\rightarrow t=31.5^oC[/tex]
Complete the complex dimensional analysis problem to determine the price of one atom of aluminum. A 20cm x 20cm square of aluminum had a mass of 1.50g. A box of aluminum cost $1.29 and the area of foil in the box is 2.33 m^2. What is the cost of one atom of aluminum?
$8.09
Because you multiply and subtract to get the answer
Identify three nonmetal atoms that, when bonded covalently, have an argon electron configuration.
Answer:
Phosphorus
Sulphur
And chlorine are non metals when bonded covalently gain electronic configuration of argon
Like PCl3
SO2 and HCl
Explanation:
Why is the mass of an actual element/ atom different then the number show on the periodic table?
A. The periodic table contains the mass of the most abundant isotope only
B. The periodic table contains an average mass of isotopes by abundance
C. The periodic table contains the largest mass of all isotopes
D. It is the same, the mass shown is the mass of an element/ atom
Answer:
B.
Explanation:
The atomic masses listed on the periodic table are a weighted AVERAGE of an element's isotopes.
Part 1
For 671 g of butadiene (C4H6) calculate the number of moles.
Answer in units of mol.
Part 2
Calculate the number of molecules.
Answer in units of molec.
Answer:
74.73 ×10²³ molecules
Number of moles = 12.41 mol
Explanation:
Given data:
Mass of C₄H₆ = 671 g
Number of moles = ?
Number of molecules = ?
Solution:
Number of moles:
Number of moles = mass/molar mass
Number of moles = 671 g/ 54.091 g/mol
Number of moles = 12.41 mol
Number of molecules:
1 mole contain 6.022×10²³ molecules
12.41 mol × 6.022×10²³ molecules / 1 mol
74.73 ×10²³ molecules
When fat comes in contact with sodium hydroxide, it produces soap and glycerin. Determine whether this is a physical change or a chemical change. Explain your
Answer:
It is a chemical change
Explanation:
Fat is a triglyceride. Triglycerides form soap when they come into contact with sodium hydroxide.
Now, we know that a chemical change is one in which a new substance is formed and it is not easily reversible. Heat is also given out or absorbed in the process.
Now the combination of sodium hydroxide and fat yields a new substance called soap. The appearance of the new substance conclusively proves that a chemical change has taken place.
cholorine is more reactive than nitrogen? why
Answer:
Because of the presence of lone pairs in nitrogen it further adds to its reactivity. Hence nitrogen is more electronegative than chlorine. ... Chlorine is less reactive than nitrogen in other words nitrogen is more reactive than chlorine
Explanation:
Brainliest plzzzzzzzzzzzzzzzzzzz
Plz guys help me plz
Explanation:
Can you edit your question and get a better pic because I cant see anything. Its blurry.
5
is the sum of the kinetic energy and the
of the particles that make up an object. *
(7 Points)
Thermal energy, potential energy
mechanical energy, potential energy
ООО
chemical energy, mechanical energy
Thermal energy, mechanical energy
Answer:
The total amount of mechanical energy is merely the sum of the potential energy and the kinetic energy. This sum is simply referred to as the total mechanical energy
predict what would happen if two people with equal mass standing on skateboard pushed against each other
Answer: They would both be pushed backward. (READ EXPLANATION)
Explanation:
Since your question has an error in it, I will provide two answers. If they were standing on their feet, they would not move. if they're both standing on skateboards, they would both move backwards because they have no friction on the ground. if both of them are standing on the same skateboard and pushing against each other, they would not move.
Which of the following is absolutely necessary for cloud formation?
A) Condensation nucleii
B) Hydrogen gas
C) Liquid methane
D) Blue food coloring
Answer:
The correct answer is letter A. Condensation nucleii
When calcium and phosphorus form an ionic bond, what is the chemical formula of the compound?
In which way does electricity flow in a DC circuit? *
From the negative terminal of the battery to the positive one
From the positive terminal of the battery to the negative one
The electricity flows first from the negative terminal to the positive one, then the
polarity switches
The electricity flows first from the positive terminal to the negative one, then the
polarity switches
Answer:
From the negative terminal of the battery to the positive one
Explanation:
DC is just dirrect current that has e- flowing from the negative terminal to the positive.