velocity = square root of (2 x Kinetic Energy / Mass)
velocity = √(2KE/m)
velocity = √(2*2800/75)
velocity = 24.29 m/s
A test rocket is fired straight up from rest with net acceleration of 25 m/s2. After 5 seconds the motor turns off, but the rocket continues to coast upward. What maximum elevation does the rocket reached?.
Maximum elevation that the rocket reached is calculated to be 1109.69 m.
What is elevation?Angle that is formed between the horizontal line and line of sight is called the angle of elevation.
Given, net acceleration is 25 m/s²
Height after burn,
S = 0.5 x f x t²
= 0.5 x 25 x 25 = 312.5 m
Velocity is f x t =25 x 5= 125 m/s
Rocket starts to fall to earth and at its maximum height the velocity is zero
0 = initial velocity - g x t
= 125 - 9.8 x t
Now, t = 12.75 secs
As, Distance travelled, S = u x t - 0.5 x g x t^2
= 125 x 12.75 - 4.9 x 12.75^2
Now, S = 797.19 m
So total elevation = 312.5 + 797.19
Therefore, total elevation = 1109.69 m
To know more about elevation, refer
https://brainly.com/question/88158
#SPJ4
How accurate was the first chronometer?
The first chronometer was not very accurate, as it had an error rate of up to 15 minutes a day. However, it was still a major advancement in maritime navigation as it improved the accuracy of longitude determination substantially compared to the methods that were used before.
The Impact of the First Chronometer on Maritime NavigationThe invention of the first chronometer in the 18th century was a major milestone in the history of maritime navigation. The chronometer was a type of clock that was designed to be used onboard ships in order to accurately measure longitude. It was a major improvement over the methods that were used before, as it had an error rate of only 15 minutes per day. This meant that navigators could much more accurately determine their position at sea, which was critical for safe navigation.
The chronometer allowed for a much more precise determination of longitude than was previously possible. Before its invention, the best method of determining longitude was based on lunar observations, which was still highly inaccurate. With the chronometer, navigators could now determine their longitude within minutes rather than hours. This greatly increased the safety and efficiency of maritime travel.
Learn more about Chronometer:
https://brainly.com/question/29617091
#SPJ4
A sample of 66 observations will be taken from an infinite population. The population proportion equals 0. 12. The probability that the sample proportion will be less than 0. 1969 is.
The likelihood that the sample percentage will be smaller than 0.1969 in accordance with the normal distribution is 0.9222 = 92.22%.
What kind of observation would this be?A simple sight may be seeing an apple drop from a tree. Another finding was that the goldfish primarily frequent a certain area of the water at morning. Another example of detection is the smell of decaying trash.
The metric X's z-score for a normal curve variable with a mean and standard deviation is provided by:
Z = X - μ / σ
The z-score computes the standard deviation of the measure's divergence from the mean.
The p-value for this z-score, which corresponds to the percentile of X, may be obtained by looking somewhere at z-score table.
Using the Fundamental Theorem, the polling distribution of the sample proportion for a percentage p in a subset n is roughly normal with mean = p and standard deviation [tex]s = \sqrt{\frac{P (1-P)}{n} }[/tex] , if np & n (1 - p) are both more than 10.
The percentage and sample size for this issue are provided by:
p = 0.12, n = 66.
The mean and standard error are thus:
μ = p = 0.12
[tex]s = \sqrt{ \frac{0.12(0.88)}{66} }[/tex]
The p-value for Z where X = 0. 1969 is the likelihood that the sample percentage will be smaller than 0. 1969, so:
Z = X - μ / σ
By the Central Limit Theorem:
Z = X - μ / s
Z = 0.1969 -0.12/ 0.04
Z = 1.92
Z = 1.92 has a p-value of 0.9222
To know more about Observations visit:
brainly.com/question/28940972
#SPJ4
How much mass was there in the protoplanetary disk out of which the planets formed compared to the mass of the Sun
When compared to the mass of the Sun, the protoplanetary disk—from which the planets formed—had between 0.01% and 0.1 mass. In addition, since the aforementioned disc was close to the solar system.
Additionally, it indicates that a star system between two other stellar systems can form at any time. Moreover, based on data from newly formed planets or stars, the protoplanetary disc is estimated to have a mass of 0.01 to 0.1 solar mass. An infant newly formed star, a T Tauri star, or a Herbig Ae/Be star is surrounded by a rotating protoplanetary disc, which is made of dense gas and dust. Another way to think about the protoplanetary disc is as the star's own accretion disc.
Learn more about mass here
https://brainly.com/question/18064917
#SPJ4
The protoplanetary disc had a mass of roughly 2 × 10³⁰kg, while the Sun's mass is roughly 1.989 × 10³⁰ kg. The protoplanetary disc and the solar system together have a mass of around 2 × 10³⁰kg. 1.989 × 10³⁰kg, or 99.89% of the solar system's mass, is in the Sun.
Formation, it is believed that protoplanetary discs are thin objects with masses much smaller than the center young star and typical vertical heights far lower than the radius. Although the gas in a typical proto-planetary disc makes up the majority of its mass, the existence of dust particles has a significant impact on how the disc evolves.
Thus, the protoplanetary disk from which the planets formed had between 0.01% and 0.1 mass when compared to the mass of the Sun. Furthermore, the object in question was close to the solar system.
To know more about protoplanetary disc
https://brainly.com/question/4961006
#SPJ4
an upright object is 50 cm from a concave mirror of radius 60 cm. the character of the image is? A.indeterminate B.virtual and inverted C.virtual and upright D.real and upright D.real and inverted
A concave mirror with a radius of 60 cm is 50 cm away from an upright object. As a result, the image's character is both real and inverted. The correct answer is E.
The image's characters are real and inverted. This is because the object is within the focal point of the concave mirror, which means that the image formed will be real, meaning that it can be projected onto a screen or captured on film. Additionally, the image will be inverted, meaning that it will be upside-down compared to the object. This is because the concave mirror reflects light inward, and the image is formed behind the mirror. The image will also be smaller than the object because the concave mirror causes light to converge.
Learn more about concave mirror here: brainly.com/question/27841226
#SPJ4
How does a chronometer determine longitude?
A chronometer can determine longitude by measuring the difference in time between a known point on land and the current location. This difference in time can then be used to calculate the longitude. For example, if the time at the known point is 12:00 pm, and the time at the current location is 12:30 pm, the difference in time is 30 minutes, which equates to 30 degrees of longitude.
How Chronometers Are Used to Determine LongitudeOne of the most important navigational tools available to sailors and explorers is the chronometer, which is used to determine longitude. Longitude is a measurement of distance east or west of a prime meridian, which is used to measure the position of a location relative to the rest of the world. Chronometers measure the difference in time between a known point on land and the current location, which is then used to calculate the longitude.
The invention of the chronometer dates back to the 18th century when John Harrison created the first accurate marine chronometer. This device was revolutionary for its time as it enabled sailors to calculate their longitude with some degree of accuracy for the first time. It was also used to set the time for navigational calculations, which allowed for more accurate and reliable navigation.
Today, chronometers are still used to determine longitude, although the technology has improved significantly since Harrison's time. Modern chronometers are incredibly accurate and reliable, ensuring that sailors and explorers can accurately calculate their position without having to rely on guesswork.
Learn more about chronometer :
https://brainly.com/question/5224178
#SPJ4
when a karate chop breaks a board with a 3000-n blow, the amount of force that acts on the hand is
Or less 3000 N of force acts just on the hand when a ninja kick breaks a piece of wood with a 3000 N blow. In physics, a pressure effect has the power to change how an item moves.
A mass-containing object's velocity could alter and accelerate as a result of a force (for example, moving from a state of rest). A push or a pull can also be used to conceptualise force. According to the physics concept of force, a change in velocity is caused by the push or pull an item receives. A body's resting or moving status can be changed by an external agent known as force.
Learn more about force here
https://brainly.com/question/13191643
#SPJ4
Which units are used to measure both velocity and speed? Select three options.
m/s
d/t
km/h
mph
m²
The vector quantity velocity (v), represented by the formula v = s/t, measures displacement or change in position (s), over time (t), in terms of a change in velocity (t).Speed (or rate, r) is a scalar number, denoted by the equation r = d/t, that quantifies the distance travelled (d) over the change in time (t). Thus, option A,C,D is correct.
What units used to measure velocity and speed?The same units are used to measure both velocity and speed. The meter is the SI unit for both displacement and distance. Time is measured in seconds, or SI. The ratio of two, or the meter per second, is the SI unit of speed and velocity.
Therefore, m/s, km/h, mph units are used to measure both velocity and speed.
Learn more about units here:
https://brainly.com/question/13769802
#SPJ1
A 60-kg and a 90-kg skydiver jump from an airplane at an altitude of 6000 m, both falling in the pike position. Make some assumption on their frontal areas and calculate their terminal velocities. How long will it take for each skydiver to reach the ground (assuming the time to reach terminal velocity is small)
The velocity for mass of 60 kg is 99.6 m/s and for mass of 90 kg is 122 m/s.
What does science mean by speed?The displacement that an object or particle experiences concerning respect to time are expressed vectorially as velocity. The meter per second (m/s) is the accepted unit of velocity magnitude (also known as speed). Alternately, the magnitude of velocity can be expressed in centimeters per second (cm/s).
What is speed and what is its SI equivalent?The pace at which a body's distance changes about time is referred to as its velocity. Its SI equivalent is m/s.
Given:-
Mass (m1) = 60kg
Mass (m2) = 90kg
Assumption:
ρ(air) = 1.21 kg/m^3
Pike position so assume A = 0.14 m^2
Pike position so assume C = 0.7
The terminal velocity [tex]V_T= \sqrt{\frac{2mg}{ρ(air)*C*A} }[/tex]
For 60kg,
[tex]V_T= \sqrt{\frac{2*60*9.80}{1.12*0.7*0.14} }[/tex]
[tex]V_T=99.6m/s[/tex]
For 90kg,
[tex]V_T= \sqrt{\frac{2*90*9.80}{1.12*0.7*0.14} }[/tex]
[tex]V_T=122m/s[/tex]
To know more about velocity visit:
https://brainly.com/question/500702
#SPJ4
Two workers are pushing on the same large crate. One worker pushes east with a force of 875 n, while the other worker pushes north with a force of 960 n. Friction between the crate and the floor is directed west with a force of 80 n and south with a force of 105 n. Assuming drag due to air resistance is negligible, what are the total north-south net forces and the total east-west net forces acting on the crate, causing it to accelerate across the floor?.
The total north-south net force acting on the crate is the sum of the forces pushing north (960 N) and the force of friction pushing south (105 N). This is a net force of 960 N - 105 N = 855 N pushing north.
The total east-west net force acting on the crate is the sum of the forces pushing east (875 N) and the force of friction pushing west (80 N). This is a net force of 875 N - 80 N = 795 N pushing east.
This can be explained by Newton's second law, which states that the acceleration of an object is directly proportional to the net force acting on it and inversely proportional to its mass.
In this case, the crate is accelerating in the direction of the net forces acting on it (north and east). The forces of friction are opposing the motion of the crate, so they are subtracted from the total net force to determine the final acceleration.
Learn more about Newton's second law here: https://brainly.com/question/13447525
#SPJ4
on with pavel. A substance having low specific head capacity gets headed faster than another mass and having high specific head capacity? Why?
Answer:
Below
Explanation:
Heat capacity has units of J / g °C
if g of the two samples are equal , for comparison , this can
be reduced to J / °C
sqec heat = J/°C
or re-arranging :
J / spec heat = °C
now if spec heat 1 > spec heat 2
then adding the same J will cause less temp rise in 1 than in 2
Example : adding 100 J of heat to each sample .... and say,
specheat 1 = 4 and specheat2 = 2
J / specheat 1 = C
100 / 4 = 25 ° C Temp change
J /specheat 2 =
100 / 2 = 50 <===== so smaller spec heat results in higher ° C change
if your vehicle breaks down on the road, the first thing to do is to... choose one a. warn other motorists. b. try to get your vehicle going. c. get off the road. d. wave until someone stops.
Option (A) is correct ,if your vehicle breaks down on the road, the first thing to do is warn other motorists
What is vehicle?A vehicle is a piece of equipment used to move people or goods. Wagons, bicycles, motorized, railroad, watercraft, amphibious, aircraft, and spacecraft are examples of vehicles.
Why are vehicles important?Why are automobiles so crucial? The private automobile has changed modern civilization for more than a century by enabling freedom and independence of movement. Due to the growing distances between places like house, workplace, academic facilities, shopping malls, and recreational facilities, transportation is becoming ever more crucial.
To know more about vehicle visit :
https://brainly.com/question/8860896
#SPJ4
in order to cover such large expanses of seafloor, shield volcanoes erupt ________ lava.
"In order to cover such large expanses of seafloor, shield volcanoes erupt basaltic lava."
Around the island of Hawaii, there are two largest active volcanoes in the world, towering more than 9 km above the ocean's surface.
The majority of basaltic and andesitic lava flows that make up shield volcanoes were quite fluid when they erupted. They were created by numerous eruptions that took place intermittently over extremely long periods of time.
Basaltic lava can easily and quickly travel more than 20 kilometres from a vent. Volcanic gases can usually escape due to the low viscosity without producing large eruption columns. However, basaltic lava fountains and fissure eruptions continue to produce towering, explosive fountains.
To know more about volcanoes:
https://brainly.com/question/891764
#SPJ4
How many atoms are there in a 2 moles of oxygen atoms? how many atoms are there in 2 moles of oxygen molecules?.
Two moles of oxygen contain 1.2044 ×10²⁴ oxygen atoms.
The mole, which is denoted by the symbol "mol," is used to measure the quantity or amount of substance. We know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number.
number of mole of O₂= 2 mole
number of atoms/molecules=number of moles × 6.022×10²³(Avogadro number)
substituting all the given values in the above equation, we get
number of oxygen atoms = 2 × 6.022 × 10²³
number of oxygen atoms= 1.2044 ×10²⁴ oxygen atoms.
Therefore, 1.2044 ×10²⁴ oxygen atoms are there in a 2 moles of oxygen atoms.
To know more about mole click here
https://brainly.com/question/20486415
#SPJ4
A transverse plane will cut a body or organ into? a) Anterior and posteriorb) Left and right c) Superior and inferior d) At an angle
c) Superior and inferior portions.
The transverse plane's function is what?
The body's upper (superior) or lower (inferior) halves are separated by the transverse plane, also known as the axial plane.This plane is where rotational or horizontal movements take place, such as:Rotation: turning the torso or even a limb about its axis of rotation.
What in anatomy is a transverse cut?Transverse plane: A horizontal slit that divides the specimen's top and bottom.additionally called a cross-sectional plane.The left and right halves of the specimen are divided by a vertical cut made along the specimen's exact center line, or midsagittal plane.
To know more about body or organ visit:
https://brainly.com/question/16934328
#SPJ4
choose the weaker acid in each of the following pairs: (a) hbr hi (b) h3aso4 h2seo4 (c) hno3 hno2
The weaker acid is a) HI (b) H3AsO4 (c) HNO2. The weaker acid in each of the pairs is determined by looking at the relative strength of their conjugate bases.
For (a), HI has a weaker conjugate base than HBr, which means that HI is the weaker acid. For (b), H3AsO4 has a weaker conjugate base than H2SeO4, making H3AsO4 the weaker acid. For (c), HNO3 has a stronger conjugate base than HNO2, so HNO2 is the weaker acid. The relative strength of the conjugate bases is important because when acids dissociate in water, they release protons.
The more electronegative an atom is, the harder it is for it to accept a proton. This means that the conjugate base of a stronger acid is less likely to accept a proton than the conjugate base of a weaker acid. The relative strength of acids and bases is measured with the pKa scale, which is the -log of the acid dissociation constant. A lower pKa value indicates a stronger acid and a higher pKa value indicates a weaker acid.
To know more about acid refer to the link brainly.com/question/29796621
#SPJ4
choose the weaker acid in each of the following pairs (a) HI or HBr (b) H3AsO4 or H2SeO4 (c) HNO3 or HNO2
Does the time it takes a car to travel a distance affect its velocity?
The amount of distance an object travels in a given length of time is measured as velocity.
What is velocity?Here's a word equation that expresses the relationship between time, distance, and velocity: Distance traveled divided by time to arrive equals velocity.During uniformly accelerated, straight-line motion, the relationship between velocity and time is simple. The bigger the velocity change, the longer the acceleration. When the acceleration is constant, the change in velocity is precisely proportional to the time.In other words, the amount by which velocity varies with distance depends on how it would fluctuate with time. That is a straightforward connection that expresses how velocity changes with distance given an a. When an exceeds zero, velocity increases.For more information on velocity kindly visit to
https://brainly.com/question/862972
#SPJ1
a two meter long rod of uniform diameter 6 cm has density 3/ (5 x) grams per cubic centimeter at distance x, measured in meters, from the left-hand endpoint. Find the total mass of the rod
The density function of a 2-m rod is 3/ (5 x) grams per cubic centimeter at distance x, measured in meters, from the left-hand endpoint. The total mass of the rod is 28.5 gram
The formula of mass as a function of density is:
m = ρ . V
Where:
ρ = density
V = volume
m = mass
In the given problem, since the density is not constant but a function of distance x, then:
dm = ρ(x) . A dx
Where:
ρ(x) = 3/(5 + x)
A = 1/4 πd² ( d = diameter of rod's cross section)
A = 1/4 (3.14) (6)² = 28.26 cm²
Hence,
dm = 28.26 × 3/(5 + x) dx
dm = 84.78 / (5 + x) dx
Take the integral:
∫dm = ∫ 84.78 / (5 + x) dx
m = 84.78ln (5+x) + C
Evaluate the integral from 0 - 2 meters. Note that in the density function, x is measured in meters while the unit of density function is already in gram per cubic centimeters. Hence, no need to convert it to cm.
m = 84.78 [ln(5+2) - ln(5+0)]
= 84.78 [ln(7) - ln(5)]
= 28.5 gram
There was a typo in your question, most probably your question was:
A two meter long rod of uniform diameter 6 cm has density 3/ (5 + x) grams per cubic centimeter at distance x, measured in meters, from the left-hand endpoint. Find the total mass of the rod
Learn more about density here:
https://brainly.com/question/21805590
#SPJ4
The figure shows two vectors T⃗ and U⃗ separated by an angle θTU.
You are given that T⃗ =(3,1,0), U⃗ =(2,4,0), and T⃗ ×U⃗ =V⃗ .
1) Express V⃗ as an ordered triplet of values, separated by commas.
2) Find the magnitude of V
3) Find the sine of the angle between T⃗ and U⃗ .
Answer:
1) (0,0,10)
2) 10
3) 0.707
Explanation:
1) Given the x,y, and z magnitudes of both T and U, we find V by using the cross product: c = (ay*bz - az*by)i^ + (az*bx - ax*bz)j^ + (ax*by - ay*bx)k^
(i^ = "i hat" etc. sry to confuse)
in this case, I used a=T, b=U, and c=V:
V = (Ty*Uz - Tz*Uy)i^ + (Tz*Ux - Tx*Uz)j^ + (Tx*Uy - Ty*Ux)k^
Now plug in values:
V = (1*0 - 0*4)i^ + (0*2 - 3*0)j^ + (3*4 - 1*2)k^
V = 0i^ + 0j^ + 10k^
These are your components.
2) To get the magnitude of V, you add up the vector components:
sqrt( 0^2 + 0^2 + 10^2)
sqrt(100) = 10
Note: because they are vectors, you must use vector addition with the square root. (do NOT simply add 0 + 0 + 10 = 10.)
3) Lastly it asks for sin(theta), so we can use the equation of:
c = a*b*sin(theta)
Again I input c = V, a = T, b = U:
V = T*U*sin(theta)
Isolate sin(theta) on one side:
sin(theta) = V/(T*U)
To get just T or U, do vector addition once more for their x,y, and z components:
T = Tx + Ty + Tz = sqrt( 3^2 + 1^2 + 0^2) = sqrt( 9 + 1 + 0) = 3.162
U = Ux + Uy + Uz = sqrt( 2^2 + 4^2 + 0^2) = sqrt (4 + 16 + 0) = 4.472
Plug in values:
sin(theta) = V/(T*U) = 10/(3.162*4.472) = 0.707
what is the net force that is the result ot combining a 30 N force at a 45° angle above the horizontal and a 45 N force 37° above the horizontal
The net force that is the result of combining the two forces is 74.83 N.
What is the net force of the two forces combined?
The net force of the two forces combined is calculated as follows;
The sum of the vertical component of the forces is calculated as;
Fy = 30 N x sin ( 45 ) + 45 N x sin ( 37 )
Fy = 48.3 N
The sum of the horizontal component of the forces is calculated as;
Fx = 30 N x cos ( 45 ) + 45 N x cos ( 37 )
Fx = 57.15 N
The net force that is the result of combining the two forces is calculated as follows;
F (net) = √ ( Fy² + Fx² )
F (net) = √ ( 48.3² + 57.15² )
F (net) = 74.83 N
Learn more about net force here: https://brainly.com/question/14361879
#SPJ1
a sled is pulled along a flat road with a consistency velocity. The sled is being pulled by a rope that makes an angle of 25 degrees with the horizontal. The friction of a snow on the sled provides a force of 85 Newtons. What is the force being applied to the rope
The force being applied to the rope is 43.78 Newtons.
How do you determine the force applied?To find the force being applied to the rope, you can use the formula:
F = ma
where,
F is the force, m is the mass of the sled, and a is the acceleration of the sled. Since the sled is moving at a constant velocity, the acceleration is 0.
The force being applied to the sled by the rope can be broken down into two components:
a horizontal component and a vertical component.The horizontal component is the force being applied to the sled in the direction it is moving, and the vertical component is the force being applied to the sled in the direction perpendicular to the direction it is moving.
Apply trigonometry to find the horizontal and vertical components of the force being applied to the sled. The horizontal component is the force being applied to the sled in the direction it is moving, and the vertical component is the force being applied to the sled in the direction perpendicular to the direction it is moving.
So, the horizontal component of the force being applied to the sled is 85 * cos(25) = 72.67 Newtons. The vertical component of the force being applied to the sled is 85 * sin(25) = 42.78 Newtons.
Since the friction of the snow on the sled provides a force of 85 Newtons in the opposite direction of the direction the sled is moving, the total horizontal force being applied to the sled is 72.67 - 85 = -12.33 Newtons. This means that the force being applied to the rope in the direction it is being pulled is 12.33 Newtons.
The total vertical force being applied to the sled is 42.78 - 0 = 42.78 Newtons. This means that the force being applied to the rope in the direction perpendicular to the direction it is being pulled is 42.78 Newtons.
So, the total force being applied to the rope is the square root of the sum of the squares of the horizontal and vertical components of the force. This is equal to the square root of (12.33^2 + 42.78^2) = 43.78 Newtons.
Therefore, the correct answer is as given above
learn more about force: https://brainly.com/question/12970081
#SPJ1
When you play with your toy gun, the gun has a spring. When the spring is compressed by 0.12m, the toy gun shoots out a 0.010 kg pellet to a max height of 100m, a) What is the final gravitational potential energy of the pellet
The Gravitational Potential Energy (GPE) of the pellet is 980 Joules.
To find the final Gravitational Potential Energy (GPE) of the pellet, we can use the formula:
GPE = mgh
Where m is the mass of the object (in this case, the pellet), g is the acceleration due to gravity (approximately 9.8 m/s² on the surface of the Earth), and h is the height the object is above a reference point.
In this case, the mass of the pellet is 0.010 kg, the acceleration due to gravity is 9.8 m/s², and the final height of the pellet is 100m.
So the final Gravitational Potential Energy of the pellet is:
GPE = (0.010 kg)(9.8 m/s^2)(100m)
GPE = 980 Joules
To learn more about Gravitational Potential Energy visit: https://brainly.com/question/3120930
#SPJ4
a rock is dropped from a bridge and it hits the river 4.5 seconds later. How high is the bridge?
Answer:
99 meters
Explanation:
Apply the distance formula:
[tex] \displaystyle{s = ut + \dfrac{1}{2} g{t}^{2} }[/tex]
where u is initial velocity which is 0 m/s since there is no initial velocity by dropping an object.
t is time which we know is 4.5 seconds. Finally, g is a constant of acceleration due to gravity which on Earth equals to 9.8 m/s². Therefore:
[tex] \displaystyle{s = 0 \cdot 4.5 + \dfrac{1}{2}(9.8) {(4.5)}^{2} } \\ \\ \displaystyle{s = \dfrac{1}{2}(9.8) {(4.5)}^{2} } \\ \\ \displaystyle{s \approx 99 \: \text{m}}[/tex]
Therefore, the bridge is around 99 meters height.
a cheetah can accelerate from rest to a speed of 25.5 m/s in 4.00 s. what is its acceleration (in m/s2)? (enter a number.)
A cheetah may accelerate at a speed od 25.5 m/s within 4.00 seconds, which equals 51.
Tell me about acceleration.acceleration describes the speed and direction changes in velocity over time. Acceleration refers to the change in speed or direction of an item or point travelling straight forward. Due to the constant change in direction, motion on a circle accelerates even while the speed is constant.
What exactly is the law for acceleration simple?According to Newton's Second Law on Motion, when a force applies on a mass object, acceleration occurs and speed increases. The application of the this motion law can be seen while bicycling. There is mass in your bicycle. The force is generated by the leg muscles pressing against the bicycle pedals.
To know more about acceleration visit:
https://brainly.com/question/12550364
#SPJ4
What is the KE of a 72.62 kg person running at 1.78 m/s
Answer:
115 J (100 J if following significant rule)
Explanation:
We can find the kinetic energy by applying the formula:
[tex] \displaystyle{ \text{ KE} = \dfrac{1}{2}mv^2}[/tex]
m is mass and v is velocity. Therefore, substitute in the formula:
[tex] \displaystyle{ \text{ KE} = \dfrac{1}{2} \times 72.62 \times {1.78}^{2} } \\ \\ \displaystyle{ \text{ KE} = \dfrac{1}{2} \times 72.62 \times 3.17} \\ \\ \displaystyle{ \text{ KE} \approx 115 \: \text{J}}[/tex]
If following the significant rule, it'd be 100 J but 115 J is more appropriate.
A 150-kg football player collides head-on with a 75-kg running back. During the collision, the heavier player exerts a force of magnitude on the smaller player. If the smaller player exerts a force back on the heavier player, which response is most accurate
(A), FA = FB . Both heavier and lighter players exert force, which is equal in magnitude and direction.
Every action has an equal and opposite reaction, according to Newton's third law of motion. The force of a heavier player on a lighter player is an action-reaction pair to the force of a lighter player on a heavier player.
As a result, both forces are equal in magnitude but opposite in direction. As a result, option (A) is the best option. Regardless of whether one object is lighter or heavier, two objects exert equal and opposing forces on each other.
For more questions like Players click the link below:
https://brainly.com/question/23902008
#SPJ4
Complete question is attached below:
What is the index of refraction through air?
The index of refraction through air is approximately 1.0003 because the refractive index of air is very close to 1.
This is because air has no optical properties that significantly affect the bending of light rays. Therefore, the refractive index of air is close to 1, which is the refractive index of a vacuum.
The refractive index of air is affected by several factors, including:
temperaturepressurehumiditythe presence of any suspended particles in the air.As these factors change, the refractive index of air changes slightly. For example, when the temperature or pressure increases, the refractive index of air increases. Similarly, when the humidity increases, the refractive index of air decreases.
Learn more about the index of refraction:
https://brainly.com/question/12469161
#SPJ4
If you drag a couch 6 m with 84 N of force at an angle of 40 degrees, how much work did you do?
Answer:
386.09 J
Explanation:
You want to know the work done to move a couch 6 m if a force of 84 N at an angle of 40° is used to move it.
WorkWork is the product of force and distance. The force is measured in the direction of motion. Here, the force in the direction of motion is ...
(84 N)cos(40°)
Then the work done is ...
W = Fd
W = (84 N)cos(40°)·(6 m) = 386.09 N·m = 386.09 J
You did 386.09 J of work to drag the couch.
The compound beam is fixed at A, pin connected at B, and supported by a roller at C. Draw the shear and moment diagrams for the beam.
The composite beam is supported by a roller at A, pin attached at B, and fastened at C. (See pic). The sheer and moment diagrams' figures are included.
At the intersection of "A" and "B," the shear force remains constant. in the Shear diagram, the first incline plane.
Linear shifts in shearing force are present between "B" and "C." The bending moment diagram thus reveals the parabolic shape.
The moment is 0 at point "B."
By calculating the shear force and bending moment at a specific place on a structural element, such as a beam, shear and bending moment diagrams are analytical approaches that are used in conjunction with structural analysis to help structural design.
Learn more about shear diagram
brainly.com/question/29749446
#SPJ4
What percentage of the Earth is made up of water
Answer:
water covers 70% of the earth