Identify the velocity-versus-time plot(s) that correspond to motion under a constant, non-zero acceleration.
Answer:
See explanation
Explanation:
The question is incomplete because the images were not attached but I will try to help you as much as possible.
Constant acceleration implies that the velocity increases uniformly with time.
The graph of constant acceleration is a straight line graph having a slope. The slope of the graph is constant at any point along the straight line.
The image attached shows a velocity-time graph depicting constant acceleration.
Is gravity less or more in the moon?
Answer:
The gravity is less in the moon as compared to Earth.
Answer:
The Moon's surface gravity is about 1/6th as powerful or about 1.6 meters per second per second. The Moon's surface gravity is weaker because it is far less massive than Earth. A body's surface gravity is proportional to its mass, but inversely proportional to the square of its radius
Explanation:
brainliest + extra points (50) plzz
A 47.5-g ball moves at 30.0 m/s. If its speed is measured to an accuracy of 0.20%, what is the minimum uncertainty in its position
Answer:
The minimum uncertainty in its position is 1.85 x 10⁻³² m.
Explanation:
Given;
mass of the ball, m = 47.5 g = 0.0475 kg
speed of the ball, v = 30 m/s
measuring accuracy of the speed, = 0.2% = 0.002
The uncertainty in measurement of momentum;
ΔP = mΔv
ΔP = (0.0475)(30 x 0.002)
ΔP = 2.85 x 10⁻³ kgm/s
The uncertainty in position is calculated as;
[tex]\delta x \geq \frac{h}{4\pi (\delta P)}[/tex]
where;
h is Planck's constant
[tex]\delta x \geq \frac{6.626 \ \times \ 10^{-34}}{4\pi (2.85 \ \times \ 10^{-3})} \\\\\delta x \geq 1.85 \ \times \ 10^{-32} \ m[/tex]
Thus, the minimum uncertainty in its position is 1.85 x 10⁻³² m.
Which list is in order from biggest to smallest? A. Earth Solar system Nebula Galaxy O O B. Universe - Galaxy Solar system Earth O C. Universe Earth Solar system Nebula O D. Solar system som Galaxy – Nebula Earth
Answer:B, universe, galaxy, solar system, earth
Explanation:
A p e x
Answer:
universe, Galaxy, solar system, earth
Explanation:
A P E X
1| Page
01. (a) (i) What is Polarization of a matter
(ii) draw in atomic view before and after
Answer:
Polarization occurs when an electric field distorts the negative cloud of electrons around positive atomic nuclei in a direction opposite the field. Polarization P in its quantitative meaning is the amount of dipole moment p per unit volume V of a polarized material, P = p/V.
Explanation:
Answer:
Polarization occurs when an electric field distorts the negative cloud of electrons around positive atomic nuclei in a direction opposite the field. Polarization( P) in its quantitative meaning is the amount of dipole moment (p) per unit volume V of a polarized material, where P = p/V.
1. Determine the kinetic energy of a 625-kg roller coaster car that is moving with a speed of 18.3 m/s,
Answer:
104653.13J
Explanation:
Given parameters:
Mass of roller coaster = 625kg
Speed = 18.3m/s
Unknown:
Kinetic energy = ?
Solution:
The kinetic energy is the energy due to the motion of a body.
Kinetic energy = [tex]\frac{1}{2}[/tex] x m x v²
m is the mass
v is the speed
Kinetic energy = [tex]\frac{1}{2}[/tex] x 625 x 18.3² = 104653.13J
When the Moon is at a distance of 0.25 D from the Earth, the gravitational force on the Moon from the Earth is 16.00 F. At what distance will the force on the Moon be 4.00 F?
Answer:
On the way to the Moon the Apollo astronauts reached a point where the. Moon's gravitational pull became stronger, than the Earth's. (a) Determine the distance of ...
Explanation:
Last week Tasha and Amy got into a fight at school. Tasha is accusing Amy of talking behind her back. Since the fight, Tasha has been
spamming Amy's social media profile with posts calling her a backstabber, a liar, and a cheat, among other things, Amy insists the matter was
all a misunderstanding, but some of her friends have started to turn against her.
In this situation Amy should try to confront Tasha face to face to sort the matter out. (5 points)
O True
O False
Answer:
True
Explanation:
Answer:
True
Explanation:
I feel that if she tries sorting it out herself that it could go two ways.
Calculate the volume of 1280 kilograms of aluminium if the density is 2700kg/m3
Answer:
0.47m3
Explanation:
Volume = Mass / Density
In this case:
Mass - 1280 kg
Density - 2700kg/m3
1280 / 2700 = 0.4740741m3
When this is rounded off ( 2 d.p ):
0.47 m3
HOPE THIS HELPED
A solid sphere of radius R carries a fixed, uniformly distributed charge q. Obtain an expression for the magnitude of the electric field created by the sphere at a point P outside the sphere.
Answer:
The electric field outside the sphere will be [tex]\dfrac{qr}{4\pi\epsilon_{0}R^3}[/tex].
Explanation:
Given that,
Radius of solid sphere = R
Charge = q
According to figure,
Suppose r is the distance between the point P and center of sphere.
If [tex]\rho[/tex] be the volume charge density,
Then, the charge will be,
[tex]q=\rho\times\dfrac{4}{3}\pi R^3[/tex].....(I)
Consider a Gaussian surface of radius r.
We need to calculate the electric field outside the sphere
Using formula of electric field
[tex]\oint{\vec{E}\cdot \vec{dA}}=\dfrac{Q}{\epsilon_{0}}[/tex]
[tex]E\times4\pi r^2=\dfrac{\rho\dotc \dfrac{4}{3}\pi r^3}{\epsilon_{0}}[/tex]
Put the value from equation (I)
[tex]E\times4\pi r^2=\dfrac{qr^3}{\epsilon_{0}R^3}[/tex]
[tex]E=\dfrac{qr}{4\pi\epsilon_{0}R^3}[/tex]
Hence, The electric field outside the sphere will be [tex]\dfrac{qr}{4\pi\epsilon_{0}R^3}[/tex].
If you want to delay a pulse of light in a laser experiment, you can send the light through a long coil of fiber optic cable. Light travels somewhat slower in the glass core of a fiber than it does in vacuum. We will approximate the speed of light in the fiber as 2.04 x 108 m/s. What length of fiber (in meters) should you use if you want to delay the arrival of light by 557 ns
Answer:
d = 113.6 m
Explanation:
For this exercise, the first thing we must notice is that the speed of the laser beam in the fiber is constant, so we can use the uniform motion relationships to find the necessary distance
v = d / t
let's reduce to SI units
t = 557 ns = 557 10⁻⁹ s
d = v t
d = 2.04 10⁸ 557 10⁻⁹
d = 1.136 102 m
d = 113.6 m
This is the distance of the fiber for the laser to arrive with the desired delay
A 1.5kg object moving with a speed of 2.5m/s strikes a wall and the ball rebounds with a speed of 1.5m/s. The ball is in contact with the wall for 0.045s. What is the magnitude of the average force exerted on the ball by the wall?
Answer:
F = 133.33[N]
Explanation:
This problem can be solved by the principle of momentum conservation, which tells us that momentum is preserved before and after the bounce of the ball on the wall.
In such a way that the movement towards the wall we will take it with a positive sign, and the force of the rebound to the left as negative. The movement to the left will be taken as a negative sign.
[tex]m_{1}*v_{1}-F*t=-m_{1}*v_{2}[/tex]
where:
m₁ = mass of the object = 1.5 [kg]
v₁ = velocity of the ball before hitting the wall = 2.5 [m/s]
F = average force [N]
t = time contact = 0.045 [s]
v₂ = velocity of the ball after hitting the wall = 1.5 [m/s]
Now replacing:
[tex](1.5*2.5)-F*0.045=-(1.5*1.5)\\3.75+2.25=F*0.045\\F=6/0.045\\F=133.33[N][/tex]
Approximately, What is the value of the Hubble Constant, as measured by scientists? Hypothetically, if the value of the Hubble Constant were 700 km/s/Mpc, what would this imply about the age of our universe?
Answer:
The current value of the Hubble's constant = 73 km/sec/Mpc.
t = 71.9 trillion years will be the new age of universe if the Hubble constant = 700 km/s/Mpc
Explanation:
The current value of the Hubble's constant = 73 km/sec/Mpc. However, recent discoveries in the cosmology contradicts the idea of Hubble constant as being fixed. Some scientists are not agreeing on this value and the debate is going on.
Hubble law states that how fast universe is expanding or in other words, galaxies are expanding separating with a speed directly proportional to the distance of galaxies to the earth.
Hence,
v is directly proportional to d
where, v = apparent velocity
d = distance
if we equate velocity and distance then there comes Hubble constant.
v = [tex]H_{0}[/tex] x d
[tex]H_{0}[/tex] = 73 km/sec/Mpc
where, Mpc = Mega Parsec = 1 Mpc = 3.086 x [tex]10^{19}[/tex] km
We can use Hubble constant to tell the age of universe.
t = d/v
t = d/( [tex]H_{0}[/tex] xd)
t = 1/[tex]H_{0}[/tex]
Scientist calculated the age of universe by using Hubble constant, which is 13.4 billion years.
Now, if we hypothetically change the value of Hubble constant,
from [tex]H_{0}[/tex] = 73 km/sec/Mpc to [tex]H_{0}[/tex] = 700 km/sec/Mpc
then the age of universe will be:
t = 1/[tex]H_{0}[/tex]
first convert the units of new [tex]H_{0}[/tex] into 1/s
[tex]H_{0}[/tex] = (700) x (/3.08 x [tex]10^{19}[/tex] )
[tex]H_{0}[/tex] = 227.27 x[tex]10^{-19}[/tex] = 2.27 x [tex]10^{-21}[/tex] 1/s
So,
Age of universe will be:
t = 1/[tex]H_{0}[/tex] = 1/2.27x[tex]10^{-21}[/tex] 1/s
t = 2.27 x [tex]10^{21}[/tex] s
t = 71.9 trillion years
t = 71.9 trillion years will be the new age of universe if the Hubble constant = 700 km/s/Mpc
Given value:
Hubble Constant,
[tex]H_o = \frac{700 \ km/s}{Mpc}[/tex]We know,
[tex]Mpc = 3.086\times 10^{19} \ km[/tex]By substituting the value of "Mpc" in Hubble constant, we get
→ [tex]H_o = \frac{700}{3.086\times 10^{19}}[/tex]
[tex]= 227\times 10^{-19} \ 1/s[/tex]
[tex]= 2.27\times 10^{-21} \ 1/s[/tex]
The Hubble's time will be:
→ [tex]H_o = \frac{1}{t}[/tex]
or,
→ [tex]t = \frac{1}{H_o}[/tex]
[tex]= \frac{1}{2.27\times 10^{-21}}[/tex]
[tex]= 4.4\times 10^{20} \ seconds[/tex]
Thus the above approach is right.
Learn more about Hubble Constant here:
https://brainly.com/question/13691927?
The area of the foundation of a square house is 840 ft. Find
the side length of the foundation of the house to nearest whole
number
Answer:
210 ft.
Explanation:
Since a square has 4 sides and all sides are equal, just do 210 divided by 4.
A boat moves through the water of a river at 8 m/s relative to the water, regardless of the boat's direction. If the water in theriver is flowing at 1.9 m/s, how long does it take the boat to makea round trip consisting of a 260 m displacement downstream followedby a 260 m
Answer:
68.88 m/s
Explanation:
downstream speed = 8+1.9=9.9 m/s
upstream speed = 8-1.9= 6.1 m/s
Therefore, total time taken would be 260/9.9+260/6.1 = 26.26+42.62 =
68.88 m/s
What is the potential energy of a 2500 g object suspended 5 m above the earth's surface?
kilograms. convert mass to kilograms to solve this problem.
Answer:
Explanation:
Potential energy, which is the energy a body assumes at a position, can be calculated using the formula:
P.E = m × g × h
Where;
m = mass (kg)
g = acceleration due to gravity (10m/s²)
h = height (m)
1. A 75.0 kg man pushes on a 500,000kg wall for 250s but it does not move. How
much work does he do on the wall?
Answer:
0J
Explanation:
No work is being done on the wall by the man pushing on it.
Given parameters:
Mass of man = 75kg
Mass of wall = 500000kg
Time = 250s
Unknown:
Work done = ?
Solution:
Work done is the force applied on a body that moves it along a particular path.
For work to be done, distance must be move or displacement must occur.
Since the wall is not moving the distance is 0;
Work done = Force x distance
Since distance is 0m, work done is 0J
The work done on the wall by the man is 0 J.
To calculate the amount of work done by the man, we use the formula below.
Formula:
W = (ma)d............. Equation 1Where:
W = Work done on the wall by the manm = mass of the walla = acceleration of the walld = distance.from the question,
Given:
m = 500000 kga = 0 m/s² (not moving)d = 0 m.Substitute these values into equation 1
W = 500000(0)(0)W = 0 J.Hence, the work done on the wall by the man is 0 J.
Learn more about work done here: https://brainly.com/question/8119756
Bro help me
Explain how an object with a higher temperature can have less thermal energy than an object with a lower temperature. ASAP
The total energy of all the particles makes up thermal energy. This implies that larger objects with slower-moving particles at low temperatures can have more energy than smaller ones with higher temperatures.
What is thermal energy?Thermal energy is the sum of the energies of all the particles. This implies that larger objects at low temperatures can have more energy than smaller ones at higher temperatures due to slower-moving particles.
These molecules and atoms move more quickly when something is heated, providing it with more thermal energy. Compared to cold water, hot water has more thermal energy.
Therefore, molecules and atoms in colder objects move more slowly and have less thermal energy than those in warmer ones. The ability of particles to transfer energy increases with speed.
To learn more about thermal energy, refer to the below link:
https://brainly.com/question/11278589
#SPJ2
4. What is the electric field strength (E) at a distance of 0.50 m from a 1.00×10°C charge?
Answer:
3.6*10¹⁰N/C
Explanation:
The formula for Electric field strength is expressed as:
E = kQ/r²
k is the coulombs constant = 9*10^9Nm²/C²
Q is the charge = 1.00×10°C
r is the distance = 0.50m
Substitute the parameters into the formula as shown:
E = kQ/r²
E = 9*10^9(1)/0.5²
E = 9*10^9/0.25
E = 36*10^9
E = 3.6*10¹⁰N/C
Hence the electric field strength is 3.6*10¹⁰N/C
A water molecule has 2 hydrogen atoms and 1 oxygen atom. If you were to add an additional oxygen atom to the molecule, would it still be water? If not, what would it be?
Answer:
No, it would not still be water. it would be hydrogen peroxide
Explanation:
water is [tex]H_{2} O[/tex]. Adding another oxygen would make it [tex]H_{2} O_{2}[/tex], which is hydrogen peroxide
Answer:
It would be Hydrogen peroxide
Explanation:
Atoms actually prefer being configured as water (H2O). Adding on the extra oxygen takes a lot of energy (and other chemicals). That's why we see lots of water and not much hydrogen peroxide around in nature. The reason hydrogen peroxide (H2O2) is dangerous is because it actually wants to drop off that extra oxygen and become water. Anything that does this is called an oxidising agent. An oxygen atom on it's own is pretty unstable and really wants to snatch up electrons from somewhere. First it'll probably gobble up some free floating hydrogen and make some more water with it. In our bodies we don't have much free floating hydrogen, so it runs out pretty quick. The oxygen atom army then has to start breaking up bigger molecules to steal the hydrogens and sometimes even the nitrogens. This breaks up the molecules that form the structures of your body and leaves you with a jumble of random configurations of atoms where the oxygen atoms passed through. Now, before you ask, normally oxygen doesn't do it to you because it exists in the air as O2, bonded to itself. The isolated oxygen atoms only exist for a brief time after they've split up from the hydrogen peroxide.
Victor covers 210 km by car at a speed of 70 km/hr. find the time taken to cover this distance.
Answer:
3 hrs
Explanation:
the distance covered by victor= 210 km
speed= 70 km/hrs
so, 70×3= 210
so the answer is 3 hrs
BTW im a small kid so don't just right away say the explanation sucks and the subject physics is not yet started in my grade.
edit: don't give me brainless answer plz.
If at some point in time an object has zero velocity and zero acceleration, what does that mean about its motion at the next instant
Answer:
Explanation:
Usually, when an object possesses 0 velocity, then the object is expected to be at rest. But like the popular saying, there's always an exception to every rule. There exists cases in which an object isn't at rest, but possesses 0 speed or velocity. Since acceleration is the rate of change of velocity with time, the acceleration becomes negative, instead of positive.
Again, when the acceleration becomes zero, it means that the object isn't moving or it has no speed. And thus, the body is at rest. Every moving body as an acceleration, either positive, or negative. Zero acceleration means the object is at rest, and not moving at all.
Please leave a like if it helped you
At any point in time, when
when the acceleration becomes zero, it means that the object isn't moving or it has no speed. And thus, the body is at rest.
What is acceleration?Acceleration is defined as the change of the velocity with the time. Acceleration is a vector quantity and is defined by both the magnitude and the direction
when the acceleration becomes zero, it means that the object isn't moving or it has no speed. And thus, the body is at rest. Every moving body as an acceleration, either positive, or negative. Zero acceleration means the object is at rest, and not moving at all.
Now If an object is moving with an acceleration that causes its speed to be reduced, there will be a moment in which it reaches v = 0, but this doesn't necessarily mean that the acceleration isn't acting anymore. If the object continues its movement with the same acceleration, it's velocity will become negative.
If you throw an object in the air with a certain velocity, it will move vertically, reducing its velocity in a 9,8 rate (which is the acceleration caused by gravity). At a certain point, the object will reach its maximum height, and will start to fall. In the exact moment that it reaches the maximum height, before it starts falling, its velocity is zero, but gravity is still acting on the object (this is the reason why it starts falling instead of just being stopped at that point). Therefore, at that point, the object has zero velocity but an acceleration of 9,8 .
To know more about acceleration follow
brainly.com/question/25749514
if humans have some animal blood sails why do we walk on 2 feet
please helppppppppppp
Answer: 4
Explanation:
when energy is greater then frequency should increase and wavelength should decrease.
Therefore answer is 4
What are forces like in a collision?
Answer:
equal in magnitude and opposite in direction.
Explanation:
I don't have 1 I just knew -_('-')_-
Answer right I will cashapp $5
Someone made a copy of an analog wave and a digital wave. Compare the copies
with the original waves. Then, explain which type of wave is a more reliable way to
encode and transmit information.
Answer:
The original analog sound waves are perfect but the copy is not because most analog waves have wavelengths that are too long to reproduce in copies
The original digital waves and the copy are perfect because with digital waves no information gets lost in the transfer of data, and there is no additional noise added to the copy.
Analog refers to audio recorded using methods that replicate the original sound waves. Digital audio is recorded by taking samples of the original sound wave at a specified rate.
Explanation:
i dont need $5
i wrote this using information from go ogle and some from brai nly. I hope it helps.
What are the units for measuring specific heat?
a. degrees Celsius per gram
b. joules per degrees Celsius
c. joules per gram degree Celsius
d. degrees Celsius per joule gram
Answer:
c. joules per gram degree Celsius
Explanation:
edg 2021
You are sending waves down a spring. You send a small amplitude wave down the spring. Then you
send a large amplitude wave. The large amplitude wave is...
A.slower than the low amplitude wave
B.the same speed as the low amplitude wave
C.faster than the low amplitude wave
Answer:
a is the correct answer hope it will help you
How long does it take for a bee traveling 11.34 m/s to fly 120 m?
diffrence between:- movable pulley and fixed pully
Answer:
fixed pulley: A pulley system in which the pulley is attached to a fixed point and the rope is attached to the object. ... movable pulley: A pulley system in which the pulley is attached to the object; one end of the rope is attached to a fixed point and the other end of the rope is free.
Explanation: