Volume of 16.0 m aqueous ammonia solution required to prepare 500.0 ml of a 1.90 m solution is 50ml
What is molarity?Molarity is used to describe the concentration of a solution. Molarity, also called molarity, is the number of moles of solute (dissolved substance) per liter of solution. The unit of molarity is moles per cubic decimeter, written as mol dm⁻³ or simply M. A cubic decimeter is the same as a liter. In many old textbooks you can find concentrations in moles/liter written as mol l⁻¹
Original concentration x initial volume = final concentration x final volume.
We will use the equation (M₁)(V₁) = (M₂)(V₂)
Given,
M₁ = 16.0 m
M₂ = 1.90 m
V₂ = 500.0 ml or 0.5L
So, 16 × V₁ = 1.90 × 0.5
16 V₁ = 0.9 m
V₁ = [tex]\frac{0.9}{16}[/tex]
V₁ = 0.05L or 50ml
To know more about molarity visit:
https://brainly.com/question/19517011
#SPJ4
Why was temperature change for the water slight in your experiments while the temperature change for the metal was large?.
The difference in the temperature change can be explained by the difference in the specific heat capacity for water (4.186 J/g°C) and the specific heat capacity for the metal you used (metals have small values for specific heat capacities).
Specific heat capacity is a material characteristic that quantifies how much heat (in Joules) is needed to change the temperature of 1 g of the material by a single degree (°C or K). Water has a relatively high specific heat capacity (4.186 J/g°C), which means that you need to add 4.186 Joules of heat to increase the temperature of 1 g of water by 1 °C.
On the other hand, metals have small values for their specific heat capacities (0.900 J/g°C for aluminum, 0.386 J/g°C for copper, 0.420 J/g°C for steel), which means that their temperature will drastically change for the same amount of heat invested or taken away.
You can learn more about specific heat capacity here:
brainly.com/question/28302909
#SPJ4
I need HELP fast!!!
At the end of the video, the man getting interviewed provides an analogy about meditation and states of matter. Create your own analogy that explains the differences between the behavior of molecules in different states of matter. Explain.
The differences between the behavior of molecules in different states of matter is marathon runner
Molecule are made up of one or more atom and also the smallest particle of any substance which can exist independently and retain physical and chemical properties of the substances
They would be close to each other and are tightly packed like solid molecules and then the race was stared they were loosely packed compared to solid and then at the game reaches at the end point the players will be spread out and they would be more loosely packed compared to solid and liquids
Know more about states of matter
https://brainly.com/question/9402776
#SPJ1
3.23x106 kJ to kcal
Express the value kilocalories in to three significant figures
help me please!
The value into kilocalories up to three significant figures is 77.1 x 10^3 kilocalories
1 kj = 0.239 kilocalorie
3.23 x 10^6 kJ x 0.239 kilocalorie = 77.1 x 10^3 kilocalories
3.23 x 10^6 kJ = 77.1 x 10^3 kilocalories
What is Significant figure ?In chemistry, Significant figures are the digits of value which carry meaning towards the resolution of the measurement. They are also called significant figures in chemistry. All the experimental measurements have some kind of uncertainty associated with them.
Learn more about Significant figure here:
https://brainly.com/question/24491627
#SPJ13
How many moles are in 175.9 g of Krypton?
Answer:
2.09 molesExplanation:
We can find the number of moles from the given mass of the element by using the formula
[tex]n = \frac{m}{M} \\ [/tex]
m is the mass
M is the molar mass
n is the number of moles
The molar mass of krypton is 84 g/mol
We have
[tex]n = \frac{175.9}{84} = 2.094\\ [/tex]
We have the final answer as
2.09 molesHope this helps you
7. This question is about calculating the area.
A nanoparticle is in the shape of a cuboid.
Calculate its surface area to volume ratio.
Show working.
a
a = 80 nm
b = 15mm
c = 20nm
C
Surface area to volume ratio:
Answer:
Explanation
Finally, we can calculate the surface-area-to-volume ratio of the nanoparticle by dividing 4750 nanometers squared by 18750 nanometers cubed. It is important to place the surface area first because that is what the problem is asking us to compare.
to ensure that the decolorization of crystal violet reaction takes place within the linear range of the crystal violet calibration curve, and that there is an excess of hydroxide ions, 10.0 ml of the stock solution of crystal violet is diluted twice. first, with 10.0e so ml of distilled water and then with 10.0 ml of 0.10 m naoh. what is the [oh-] in the final dilute solution?
A calibration curve is a regression model that uses the instrument's reaction to known standards to forecast the unknown concentrations of interest-related analytes.
How do you calculate calibration curve?
The formula will have the general form of y = mx + b, where m denotes the slope and b the y-intercept, as in y = 1.05x + 0.2.When making adjustments to measurements made on samples whose values are unknown, use the equation for the calibration curve.Solve for y (the "true" value) by substituting the measured value (x) into the equation. We have four milliliters of a 2.5 x 10–5 molar solution of crystal violet.the crystal violet kinetics process, too.Usually, adding sodium hydroxide in much larger amounts causes the violet color to fade.You must now add the two of them together to complete this reaction.However, we're attempting to determine the crystal violet concentration prior to the reaction.Therefore, we are not attempting any story geometry; rather, we are attempting to determine the concentration of crystal violet at the start of the reaction.And it's not the crystal violet's concentration.We have four milliliters of a crystal violet solution that is 2.5 x 10 n-5 molar in size.When doing a crystal violet kinetics reaction.The violet tint typically vanishes as you add sodium hydroxide in much bigger amounts.Currently, you need to add the two together in this particular reaction.However, we're looking for the crystal violet concentration just before the reaction starts.We are only attempting to determine the concentration of the crystal violet at the start of the reaction; we are not attempting to perform any stories geometry here.Furthermore, it is not the crystal violet's concentration.All of the components in that particular reaction become diluted when two substances are mixed together.So, when you combine two milliliters of sodium hydroxide solution with four milliliters of the crystal violet solution.The total of those volumes makes up your new volume.Therefore, the result of mixing them is a six-ml solution.Therefore, we must apply the equation polarity times volume is equivalent to mill, aren? T times volume here in order to get the concentration before any of the sodium hydroxide reacts.The number of moles remains constant because we haven't initiated the reaction yet, and it also remains constant in this location.We therefore have a 2.5 times 10 to 5 molar solution. Therefore, we have a 2.5 x 10-5 molar solution in a four milliliter volume.We are currently working on the new mill arat E.However, we are aware that the current volume of our system is six mL.We shall divide both sides by six to obtain the new milliarat E, and we will discover that the new polarity is 1.67 times 10 to the -5moles per liter.We diluted the crystal violet with our other solutions, which reduced the polarity.
To learn more about calibration curve refer
https://brainly.com/question/13492847
#SPJ4
if there are 125 atoms of the parent isotope remaining and 875 atoms of the daughter isotope in a rock, how many half-lives have passed since the rock formed?
To solve this question we need to know the concept behind half life. Decay of radioactive element always comes under first order kinetics. Three half-lives have passed since the rock formed.
What is half life?Half life tells about the time at which the radioactive material decays to half of its initial concentration.
Mathematically the the total number of half life can be calculated as
[tex]\rm \frac{t}{t_{1/2}} =-\frac{ln\frac{N_{t}}{N_{0}} }{ln 2}[/tex]
Nt= amount of the isotope that has not yet decayed after a time t
N₀= initial amount of the isotope
t=the time
[tex]t_{1/2}[/tex] = the half-life
Substituting the given values in the above equation
[tex]\rm \frac{t}{t_{1/2}} =-\frac{ln\frac{125}{100} }{ln 2}[/tex]
Solving this we get
3[tex]t_[1/2}[/tex]= t
Therefore, three half-lives have passed since the rock formed.
To know more about half life, here:
brainly.com/question/21464063
#SPJ1
a student wrote this name for a compound made of calcium and sulfer. Sulfer calcium. What is wrong with this name? Write the correct name for the compound.
Answer: Should actually be Calcium Sulfide
Explanation: Alkali metal + non metal = salt.
2nd element in compound should either end in -ide or
a) cite the major differences between activation and concentration polarizations. (b) under what conditions is activation polarization rate controlling? (c) under what conditions is concentration polarization rate controlling?
Activation polarization is occuring due to the evolution or deposition of some gases taking place in a redox reaction. Concentration polarization occurs between two electrodes when uneven distribution of ions occurs in the boundary.
What is polarization?Polarization is the process of charge separation between two species or the potential difference occurred due to the concentration gradient.
The two types of polarization occuring are activation polarization and concentration polarization. In activation polarization there occurs difference by the accumulation of gases.
For example the evolution of gases from the hydrogen electrode immersed in an electrolyte causes a polarization between the two electrodes.
In concentration polarization, there will be a concentration gradient of ions in the boundary of two electrodes occured due the electroanalytical reaction.
To find more about electrodes , refer the link below:
https://brainly.com/question/17060277
#SPJ1
how does the specific heat capacity of water compare with the specific heat capacities of other common materials? how does the specific heat capacity of water compare with the specific heat capacities of other common materials? the specific heat capacity of water is very low in comparison with other common materials. the specific heat capacities of water and other common materials are approximately the same. the specific heat capacity of water is very high in comparison with other common materials.
Liquid water has one of the highest specific heat capacities among common substances, about 4184 J⋅kg−1⋅K−1 at 20 °C; but that of ice, just below 0 °C, is only 2093 J⋅kg−1⋅K−1. The specific heat capacities of iron, granite, and hydrogen gas are about 449 J⋅kg−1⋅K−1, 790 J⋅kg−1⋅K−1, and 14300 J⋅kg−1⋅K−1, respectively.
The amount of heat required to increase the temperature of 1 gram of a substance by 1 degree Celsius (°C) is known as specific heat. Since water has a higher specific heat than other substances, it requires more energy to raise its temperature.
The heat capacity of a sample of a substance is divided by the mass of the sample to produce the specific heat capacity (symbol cp), also known as massif heat capacity. Informally, it is the quantity of heat that must be added to one unit of a substance's mass in order to raise its temperature by one unit. joule per kelvin per kilogram is the specific heat capacity unit in the SI.
A substance's specific heat capacity may be substantially higher when heated in an open vessel that permits expansion than when heated in a closed vessel that prevents expansion, especially when the substance is a gas (specific heat capacity at constant pressure) (specific heat capacity at constant volume).
To learn more about specific heat capacity visit here:
brainly.com/question/28302909
#SPJ4
a soluble iodide was dissolved in water. then, an excess of silver nitrate, , was added to precipitate all of the iodide ion as silver iodide, . a question content area if 2.940 g of the soluble iodide gave 1.329 g of silver iodide, how many grams of iodine are in the sample of soluble iodide?
In the sample of soluble iodide, 0.7183 grams iodine are present.
To find the concentration of iodine in grams we must known about molar mass of Silver and molar mass of Iodine.
Molecular weight of Ag = 107.86
Molecular weight of I = 126.90
Molecular weight of = 107.86 + 126.90 = 234.76
Percentage of I in [tex]AgI[/tex] is = (126.90/234.77) x 100 = 54.05%
so we can convert percentage of Iodine in silver iodide into grams by using formula percentage of Iodine/100x grams of silver Iodide.
so,Concentration of Iodine in grams=[tex]\frac{54.05}{100}[/tex]×1.329
=0.5405x1.329
=0.7183g
1.329g of [tex]AgI[/tex] contains 0.7183g of iodine in soluble Iodide.
To learn more about Concertration ,Click Here
brainly.com/question/6184701
#SPJ4
what is true of atoms, elements, and minerals? multiple select question. when a mineral is separated into its component atom parts, it is still a mineral. an element is a type of atom that has a specific number of protons. if a single atom of an element is broken apart, its pieces are still recognizable as that element. an atom is the smallest unit of an element that retains the characteristics of that element. minerals are composed of chemically bonded elements.
Correct statements are:
An element is a type of atom that has a specific number of protons.
An atom is the smallest unit of an element that retains the characteristics of that element.
Minerals are composed of chemically bonded elements.
When a mineral is separated into its component atom parts, those parts will act according to the element they belong to, and the elements have properties that differ from the original mineral, because of chemical bonds formed during the creation of the mineral.
If a single atom of an element is broken apart, its pieces are protons, neutrons, and electrons, particles that are universal for all elements, and there is no way to distinguish, for example, iron neutrons from hydrogen neutrons. In cases of radioactive decay, atoms of elements may break down to form new elements.
You can learn more about chemical bonds here:
brainly.com/question/15444131
#SPJ4
preform the mathematical operation and then write the answer to the correct number of significant figures.
a) 100g + 10g
b) 903cm x 10cm
c) 0.6030 cm(2) ÷ 0.1cm
d) 9.5 mm + 0.083 mm
e) 430.0 mL - 10.2111 mL
f) 762.4 m + 3.2m + 1.21m
Preform the mathematical operation and then write the answer to the correct number of significant figures.
a) 110 g
b) 9030 cm
c) 6.0 cm
d)9.6 mm
e) 419.8 mL
f) 766.8 m
a) 100 g + 10 g = 110g
b) 903 cm × 10 cm = 9030 cm
c) 0.6030 cm² / 0.1 cm = 6.0 cm
here lowest significant is = 0.1 , so ans will round off till first decimal.
d) 9.5 mm + 0.083 mm = 9.583 mm = 9.6 mm
e) 430.0 mL -10.2111 mL = 419.8 mL
f) 762.4 m + 3.2 m + 1.21 m = 766.8 m
here the lowest significant figure = 3.2 , so the ans will be round off to first decimal figure.
Thus, preform the mathematical operation and then write the answer to the correct number of significant figures.
a) 110 g
b) 9030 cm
c) 6.0 cm
d)9.6 mm
e) 419.8 mL
f) 766.8 m
To learn more about significant figure here
https://brainly.com/question/17396594
#SPJ1
Carbon dioxide (co2) is a gaseous compound. calculate the percent composition of this compound. answer using one decimal place. what is the percent by mass of carbon? % what is the percent by mass of oxygen? %
The percent composition of carbon dioxide is as follows: 27.3% carbon, 72.7% oxygen.
To calculate the percent composition of the compound, we can assume that we have one mol of carbon dioxide. The molar mass of carbon dioxide is 44 g/mol.
Based on the molecular formula of carbon dioxide (CO₂), we can say that 1 mol of CO₂ contains 1 mol of carbon and two moles of oxygen.
The molar mass of carbon is 12 g/mol, and we can calculate its percent by mass by dividing the mass of carbon in carbon dioxide by the mass of carbon dioxide and multiplying the result by 100%:
%C = 100% * 12 g/mol / 44 g/mol
%C = 27.3%
Because carbon dioxide is made of only carbon and oxygen, we can the oxygen percent by mass by simply subtracting the carbon percent by mass from 100%:
%O = 100% - %C
%O = 100% - 27.3%
%O = 72.7%
You can learn more about percent composition here:
brainly.com/question/17505281
#SPJ4
most of the triose phosphate produced by the calvin cycle is used to regenerate rubp, which is the first reactant in the cycle. what output of the light reactions is directly required for the regeneration steps?
Adenosine triphosphate is directly required for the regeneration steps.
What is Adenosine Triphosphate?
Adenosine triphosphate (ATP) is the source of energy for use and storage at the cellular level. The structure of ATP is a nucleoside triphosphate, consisting of a nitrogenous base (adenine), a ribose sugar, and three serially bonded phosphate groups.
What is Calvin cycle?
The Calvin cycle, light-independent reactions, bio synthetic phase, dark reactions, or photosynthetic carbon reduction cycle of photosynthesis is a series of chemical reactions that convert carbon dioxide and hydrogen-carrier compounds into glucose.
To learn more about ATP, click https://brainly.com/question/19786223
#SPJ4
The half life for the decay of radium is 1620 years. What is the rate constant for this first-order process?.
The rate constant of the Decay of Radium with half life of 1620 years is 0.0004277/year.
We know, every radioactive reaction is a first order reaction.
So, it will follow the first order kinetics.
The half life of the radium sample is 1620 years.
We know, the standard formula for the half life of the first order reaction is,
T = 0.693/K
Where,
T is the half life of the reaction,
L is the rate constant of the reaction.
It is given that the half life of the reaction is 1620 years, so, putting all the values,
T = 0.693/K
K = 0.693/1620
K = 0.0004277/year.
So, the rate constant of the decay of radium is 0.0004277/year.
To know more about Rate constant, visit,
https://brainly.com/question/8813467
#SPJ4
A physical model of a crime scene is called
O a map
O an animation
O a reenactment
O a reconstruction
A physical model of a crime scene is called an animation
What exactly is tangible proof at a crime scene?The evidence that crime scene investigators gather includes fingerprints, tyre tracks, hairs, fibres, blood, and other bodily fluids. The NIJ sponsors initiatives to enhance: Blood and other bodily fluids at the location were identified.
There are three different sorts of imprint evidence: bite marks, tool marks, and shoe and tyre prints. Each of these may employ one or more of the following collection strategies, such as taking photos, lifting objects with tape, or plaster-casting.
Physical evidence, also known as actual evidence or material evidence, is any tangible thing that is presented as evidence in a court case that has some connection to the issue that gave birth to the dispute.
Learn more about crime scene refer
https://brainly.com/question/10702774
#SPJ13
Answer:
The answer is O a reconstruction.
Explanation:
Got it right on the test.
5. The electrical charges in an atom are located
A. only in the nucleus B. on protons and neutrons
C. on protons and electrons D. on protons, electrons, and
and ato
neutrons
15151 mostly
The correct option is (B) On protons and neutrons
The electrical charges in an atom are located on protons and neutrons.
What is an atomic structure?Protons and neutrons, two different subatomic particle kinds, are found in the nucleus of the atom. The neutrons have no electrical charge, while the protons are positively charged. Electrons, a third category of subatomic particle, move about the nucleus. The electrical charge on the electrons is negative. Protons and electrons, which are both positively and negatively charged, often exist in equal numbers in an atom. The atom becomes electrically neutral as a result. Around the nucleus, electrons exist at various energies, or "shells." The number of electrons that can fit inside the shell is constrained. There are various numbers of protons in the nucleus of an atom, depending on the composition. The atomic number, which is the sum of the numbers of protons and neutrons in the nucleus, is referred to as the mass number.Learn more about the Atomic structure with the help of the given link:
https://brainly.com/question/14214017
#SPJ13
how many possible monobromination products of butane are there? include minor product(s) not just the major product(s). if a product exists as a pair of enantiomers be sure to count both enantiomers as a distinct product.
Possible monobromination products of butane are 3.
What is a monobromination?Monobromination as defined by medicine:
an organic molecule is given one bromine atom by the addition process.
In a chemical process known as bromination, a compound is subjected to bromination, which adds bromine to the substance. Following bromination, the result will possess traits distinct from the initial reactant.
Any reaction or process known as bromination entails the introduction of bromine into a molecule alone. Alkene bromination with the electrophilic addition of Br₂. electrophilic aromatic substitution-based bromination of a benzene ring. Benzylic position bromination using a free radical substitution process.
By way of the reaction, a total of three monobrominated compounds will be produced.
To know more about monobromination visit:
https://brainly.com/question/16048943
#SPJ4
Profiles Tab Window HelpE- CengageNOW Online texgmenttakeCovalentActivity.do?locator assignment-takeTUTOR Percent YieldCengage: Digital Course S xResubmit[References]Consider this reaction, which occurs in the atmosphere and contributes to photochemical smog:N₂(9) + O₂(g) -2NO(g)If there is 16.28 g N₂ and excess O₂ present, the reaction yields 27.5 g NO. Calculate the percent yield for thereaction.Show Approach Show Tutor StepsE-OWL2| Online teaching x E OWLA21 Assignments | D902IncorrectYou can work though the tutor steps and submit your answer again.2
Answer:
[tex]78.83\text{ \%}[/tex]Explanation:
Here, we want to calculate the percentage yield of the reaction
Mathematically, we have that as:
[tex]\frac{Actual\text{ Yield}}{Theoretical\text{ Yiled }}\text{ }\times\text{ 100 \%}[/tex]The mass of the product NO given in the question is the actual yield which is 27.50 g
Now, let us get the theoretical yield
We find the number of moles of nitrogen gas that reacted
Mathematically, that is the mass of nitrogen gas divided by the molar mass
The molar mass of the nitrogen gas is 28 g/mol
The number of moles is thus:
[tex]\frac{16.28}{28}\text{ = 0.5814 mol}[/tex]From the equation of reaction, 1 mole of N2 yields 2 moles of NO
Thus, 0.5814 mol of N2 will yield:
[tex]0.5814\text{ }\times\text{ 2 = 1.1628 mol}[/tex]Now, to get the mass of NO produced, we multiply this number of moles by the molar mass of NO
The molar mass of NO is 30 g/mol
The mass that was produced is thus:
[tex]30\text{ }\times\text{ 1.1628 = 34.884 g}[/tex]Finally, we have the percentage yield as:
[tex]\frac{27.50}{34.884}\text{ }\times\text{ 100 \% = 78.83 \%}[/tex]An engine overheats and causes a car to catch on fire- is this a physical or chemical property?
Answer:
physical
Explanation:
HAVE GREAT DAY!
9. which flask contains the sample with the greatest density? a flask a b flask b c flask c d flask d e flask e 10. which flask contains the smallest number of moles of gas?
9 = T = 40 degrees Celsius, P = 2 atm is the greatest density
10 = T = 50 degrees Celsius, P = 0.5 atm is the smallest number of moles of gas .
Exactly which flask has the highest density?The gas with the highest atomic mass will be contained in the flask with the highest density.
Which flask would hold the most moles of gas at any given time?At constant volume and pressure, the ratio of the gas's moles to the temperature is inverse. Since the temperature was dropped, the flask containing helium will thus contain the most moles of gas.
Which flask is under the greatest pressure?Pressure and temperature have a straight relationship, PV = nRT, according to the ideal gas law. The pressure will be maximum in the heated helium flask because of this. d.
To know more about highest density visit:-
https://brainly.com/question/3883825
#SPJ13
a flexible container at an initial volume of 8.15 l contains 9.51 mol of gas. more gas is then added to the container until it reaches a final volume of 15.5 l. assuming the pressure and temperature of the gas remain constant, calculate the number of moles of gas added to the container.
The number of moles added to increase the volume of the gas from 8.51 L to 15.5 L is 8.67 moles.
The initial volume of the gas is 8.15 L and final volume of gas is 15.5 L and the initial moles are 9.51 moles.
As per the Ideal gas equation,
PV = nRT
where,
P is pressure,
V is volume of gas,
n is the number of moles of gas,
R is the gas constant,
T is the temperature of the gas.
Rearranging the equation,
V/n = RT/P
The left side is constant, so, it is valid to see,
V₁/n₁ = V₂/n₂
V₁ is initial volume,
n₁ is the initial moles,
V₂ is the final volume,
n₂ is the final moles.
So, we can write this by putting the values,
8.51/(9.5) = 15.5/n₂
n₂ = 18.17
The number of moles added = n₁ - n₂
Added moles = 8.67 moles
The moles added are 8.67 moles.
To know more about Ideal gas equation, visit,
https://brainly.com/question/25290815
#SPJ4
The density of a pure substance is always
the ............ under the same conditions
An physical properly I believe
Explanation: characteristics such as melting point boiling point color ider colored stuff etc all have physical properties
Label the diagram of ionic bonds with the name of the 2 elements involved
the options are
Lithium, fluorine, sodium and chlorine
And it has a picture of the periodic table above Brainly just let's me use one picture at a time and
that was the most important
I took 3 pictures the first one was the periodic table, the second one is shown and the third were just the options listed above ^
Answer:
Lithium (Li) and Fluorine (F)
Explanation:
Assume the atom is neutral and count the electrons. That will also be the number of protons (i.e., the atomic number).
See attached worksheet.
Using the periodic table, predict whether the following chlorides are ionic or covalent: SiCl4, PCl3, CaCl2, CsCl, CuCl2, and CrCl3.
The following chlorides are ionic or covalent:
SiCl₄ = covalent
PCl₃ = covalent
CaCl₂ = ionic
CsCl = ionic
CuCl₂ = ionic
CrCl₃ = ionic
SiCl₄ is silicon tetrachloride. SiCl₄ is a covalent. The bond between silicon and chlorine is formed by the sharing of electrons.
PCl₃ is Phosphorous trichloride . PCl₃ is covalent. Phosphorus contain 5 electrons in valence shell and requires 3 more to complete octet and chlorine require one electron to complete octet so, the bond formed is by sharing of electron.
CaCl₂ is calcium chloride. CaCl₂ is an ionic. calcium is metal and metal donates electron to chlorine is non metal and non metal accept electrons and become Ca²⁺ and Cl⁻. The bond formed by the transfer of electrons.
CsCl is cesium chloride. CsCl is an ionic. symbol of ions : Cs⁺ and Cl⁻
CuCl₂ is copper(II) chloride. CuCl₂ is ionic formed by the transfer of electrons. symbol of ions : Cu²⁺ and Cl⁻
CrCl₃ is chromium(III) chloride. CrCl₃ is an ionic. symbol of ions : Cr³⁺ and Cl⁻.
Thus, The following chlorides are ionic or covalent:
SiCl₄ = covalent
PCl₃ = covalent
CaCl₂ = ionic
CsCl = ionic
CuCl₂ = ionic
CrCl₃ = ionic
To learn more about ionic and covalent here
https://brainly.com/question/15105831
#SPJ1
A scientist placed a sample of lithium into a container of water. The scientist observed the lithium floating and making a buzzing sound as gas bubbles were forming around it. Smoke and steam were released as well. Which conclusion is BEST supported by this observation?
A.
Water was vaporized.
B.
Dissolved gases were released.
C.
A chemical change took place.
D.
The lithium was dissolved by the water.
Answer:
Explanation:Again, this is an example of a physical change. Figure 3.6. 1: Ice melting is a physical change. When liquid water (H2O) freezes into a solid state (ice), it appears changed; however, this change is only physical, as the composition of the constituent molecules is the same: 11.19% hydrogen and 88.81% oxygen by mass.03-Sept-2019
Explain the effect of an enzyme on activation energy of a reaction.
Answer:
Enzymes act as catalysts, accelerating the chemical reaction by lowering the activation energy. Activation energy is the energy needed for the particles to react. Enzymes come out of the reaction unchanged.
Explanation:
i really need the ansewer so whats the answer?
Energy was lost by substance A to the environment is the statement which best supports the data in the table and is denoted as option D.
What is Energy transfer?This is referred to as the processes which is characterized by the movement of energy from one system to another an an example is heat energy transfer which have different techniques such as conduction, convection etc.
Temperature on the other hand is the measure of the degree of hotness or coldness of a substance and is influenced by heat energy.
From the graph, we can deduce that substance has a temperature which was decreasing with time while substance B has a temperature which was constant throughout.
This therefore means that Energy was lost by substance A to the environment hence ,the reason why option D was chosen as the correct choice.
Read more about Energy transfer here https://brainly.com/question/22379099
#SPJ1
9. suppose you are analyzing an unidentified spread that has qualities of butter. how could determining whether or not the product was hydrogenated help you to identify the item?
We will be able to tell if the spread is margarine if it has been hydrogenated.
A liquid unsaturated fat can be made into a solid fat by the process of hydrogenation. In order to make an unsaturated fat saturated, hydrogen atoms must be injected into it. Trans fat, a particular form of fat, is created during this hydrogenation process.
An unsaturated fat undergoes hydrogenation, changing from a liquid to a solid. Unsaturated fats become saturated ones as a result of this process. The remaining unsaturated fats undergo another molecular shape change during this phase. An "trans" form is the end outcome.
We must maintain both of them at room temperature in order to analyze the unidentified spread. The process of hydrogenating corn oil results in the production of margarine.
Learn more about chemical reactions at
https://brainly.com/question/19626681?referrer=searchResults
#SPJ4
