Answer:
Lithium has two naturally occurring isotopes. Lithium-6 has an atomic mass of 6.015 amu. Lithium-7 has an atomic mass of 7.016 amu. The average atomic mass of lithium is 6.941 amu.
Explanation:
A gas initially at 273k is heated such that it volume and pressure became twice their original volume what is the new temperature of the gas
Answer:
1092K
Explanation:
We can use the combined gas law to answer this question:
P1V1/T1 = P2V2/T2,
where P, V and T are the Pressure, Volume, and Temperature for initial (1) and Final (2) conditions. Temperatures must be in Kelvin.
The problem states that V2 = 2V1 and P2 = 2P1.
Let's rearrange to solve for T2, which is the question:
T2 = T1(P2/P1)(V2/V1)
Note how the pressure and temperature values are written: as ratios. Enter the values:
T2 = (273K)(P2/P1)(V2/V1)
T2 = (273K)(2P1/P1)(2V1/V1) [Use the expressions for V2 and P2 from above]
T2 = (273K)(2)(2)
T2 = 1092K
What is the group number and period number for Selenium?
group 7A, period 4
group 6A, period 4
group 6a. period 3
group 4a, period 6
Answer:
Group 6a, period 4
Explanation:
Refer to image
Identify the different stages of the water cycle and the changes in the phases of water. Illustrate the arrangement and motion of particles in each phase change. Use the water cycle diagram below as reference.
The water cycle is largely composed of evaporation, condensation and precipitation.
What is the water cycle?The water cycle has to do with the movement of water throughout the ecosystem. It is one of the biogeochemical cycles that exists in nature. In the water cycle, water evaporates from the earth surface, condenses and falls as rain.
Hence, the major components of the water cycle are;
EvaporationCondensationPrecipitationLearn more about water cycle: https://brainly.com/question/1151425
What is the pH of a solution of RbOH with a concentration of 0.86 M? Answer to 2 decimal places
Answer:The pH of the solution is given by pH=−log([H3O+])
Explanation:so you can't use
pH
=
−
log
(
0.150
)
because that's the concentration of the hydroxide anions,
OH
−
, not of the hydronium cations,
H
3
O
+
. In essence, you calculated the
pOH
of the solution, not its
pH
.
Sodium hydroxide is a strong base, which means that it dissociates completely in aqueous solution to produce hydroxide anions in a
1
:
1
mole ratio.
NaOH
(
a
q
)
→
Na
+
(
a
q
)
+
OH
−
(
a
q
)
So your solution has
[
OH
−
]
=
[
NaOH
]
=
0.150 M
Now, the
pOH
of the solution can be calculated by using
pOH
=
−
log
(
[
OH
−
]
)
−−−−−−−−−−−−−−−−−−−−
In your case, you have
pOH
=
−
log
(
0.150
)
=
0.824
Now, an aqueous solution at
25
∘
C
has
pH + pOH
=
14
−−−−−−−−−−−−−−so you can't use
pH
=
−
log
(
0.150
)
because that's the concentration of the hydroxide anions,
OH
−
, not of the hydronium cations,
H
3
O
+
. In essence, you calculated the
pOH
of the solution, not its
pH
.
Sodium hydroxide is a strong base, which means that it dissociates completely in aqueous solution to produce hydroxide anions in a
1
:
1
mole ratio.
NaOH
(
a
q
)
→
Na
+
(
a
q
)
+
OH
−
(
a
q
)
So your solution has
[
OH
−
]
=
[
NaOH
]
=
0.150 M
Now, the
pOH
of the solution can be calculated by using
pOH
=
−
log
(
[
OH
−
]
)
−−−−−−−−−−−−−−−−−−−−
In your case, you have
pOH
=
−
log
(
0.150
)
=
0.824
Now, an aqueous solution at
25
∘
C
has
pH + pOH
=
14
−−−−−−−−−−−−−−
Which compound can inadvertently be created through the distillation process and can be fatal if consumed
Answer:
lWhich compound can inadvertently be created through the distillation process and can be fatal if consumed?
Methanol
Use the periodic table to determine the molar mass of silver oxide (Ag20).
Type the correct answer in the box. Use numerals, and express your answer to the correct number of significant figures
(blank) g/mol
The molar mass of the compound (i.e silver oxide) Ag₂O obtained from the periodic table is 232 g/mol
What is the molar mass of a compound?The molar mass a compound is simply defined as the sum of the molar masses of the individual elements found in the compound.
How to determine the molar mass of the compound Formula = Ag₂OMolar mass of Ag = 108 g/mol Molar mass of O = 16 g/mol Molar mass of Ag₂O =?Molar mass of Ag₂O = (2×108) + 16
Molar mass of Ag₂O = 216 + 16
Molar mass of Ag₂O = 232 g/mol
Learn more about molar mass:
https://brainly.com/question/25879634
Answer: 231.753 g/mol
Explanation:
got it right on Exact Path
gas occupies 100.0 mL at a pressure of 780 mm Hg. What is the volume of the gas
when its pressure is increased to 880 mm Hg?
Answer:
Final volume after applying 880 mmHg pressure = 89.28
Explanation:
Initial volume (V 1)= 100 ml
Initial pressure (P1) =780 mm Hg = 780/780 = 1atm
Final pressure (P2)=880 mm Hg = 880/780 =1.12 atm
Final volume (V2)=?
We know that,
Applying Boyle's law,
P1 V1=P2 V2
1*100=1.12*V2
100=1.12*V2
100/1.12=V2
89.28=V2
V2=89.28 ml
Hope this helps you. Please mark me as a brainlist.
help this mirrorball, please
Answer:
Option B
Explanation:
Avagadro's hypothesis showed that at constant temperature and pressure equal volume of all gases contains equal no of molecules.
Avagadro's constant is known as 6.022×10^23
Which of the following represents Avogadro's hypothesis?
Equal volumes of all gases under same conditions of temperature and pressure contain equal number of moleculesAvogadro's hypothesis is an experimental gas law that relates to the volume of gas to the amount of gas present. Its formula is :
[tex] \sf \frac{V_1}{ n_{1} } = \frac{V_2}{ n_{2} } [/tex]
Where,
V1 is first volumeV2 is second volumen1 is first amount of gas (in moles)n2 is second amount of gas (in moles)As molecules move in a current of air or water, heat is transferred by ____________.
Answer:
It is called Convection. Hope this helps!!!
PREDICT THE PRODUCTS AND AND BALANCE THE EQUATION
Al(s) + __O2 (g)
Answer:
See below.
Explanation:
Products :-
Al₂O₃ (aluminum oxide)
Balanced Equation :-
4Al + 3O₂ => 2Al₂O₃
Hope it helps.
Which symptoms are common with cardiac dysrhythmias? Select all that apply.
low blood pressure
fluid buildup in the hands
dizziness
palpitations
headaches
Answer: low blood, dizziness, and palpitations
Explanation: Im doing the assignment now
what is the trophic level of common Prawn? primary,secondary,or tertiary consumer?
Answer:
secondary consumer
Explanation:
The salt water food web begins with producers (plants, algae, phytoplankton) that create food from sunlight, and continues with primary consumers (zooplankton) that eat the producers, followed by secondary consumers (shrimp, crustaceans, small fish) that eat the primary consumers, then tertiary consumers
A solid has a very high melting point, great hardness, and poor electrical conduction. This is a(n) ________ solid
Calculate the ratio of H ions to OH– ions at a pH = 7. Find the concentration of H ions to OH– ions listed in Table B of your Student Guide. Then divide the H concentration by the OH– concentration. Record this calculated ratio in Table A of your Student Guide. Compare your approximated and calculated ratios of H ions to OH– ions at a pH = 7. Are they the same? Why or why not? Record your comparison in Table A. What is the concentration of H ions at a pH = 7? mol/L What is the concentration of OH– ions at a pH = 7? mol/L What is the ratio of H ions to OH– ions at a pH = 7? :1.
The pH can be defined as the measure of the acidity or the basicity of the solution. The ratio of hydrogen ion concentration and hydroxide ion concentration at pH 7 is 1.
What is hydrogen ion concentration?The hydrogen ion concentration can be given as the amount of hydrogen percent in the sample solution.
The pH has been the negative logarithmic value measurement of the hydrogen ion in the sample. The sum of the hydrogen ion and the hydroxide ion in the sample has been a constant 14.
[tex]\rm pH+pOH=14[/tex]
The pH can be given as:
[tex]\rm pH=-log[H^+][/tex]
At pH 7 neutral pH the concentration of Hydrogen ion and hydroxide are equal i.e.
[tex]\rm 7=-log[H^+]\\H^+=10^{-7}\;M[/tex]
The hydroxide ion concentration has been given as:
[tex]\rm pOH=-log[OH^-]\\7=-log[OH^-]\\OH^-=10^{-7}\;M[/tex]
The concentration of hydrogen and hydroxide are equal at pH 7. Thus, the ratio of the concentration has been 1.
This states the sample to be neutral.
Learn more about pH, here:
https://brainly.com/question/4676102
Give the characteristic of a first order reaction having only one reactant.
Answer:
As the first order reaction depends on (a uni-molecular reaction) the concentration of only one reactant.
And the rate law of the reaction of first order with a reactant A is:
rate = K[A]^-1
when K is the rate constant.
What kind of metal are spoons typically made out of?.
Answer:
Spoons are usually made out of steel
Answer:
Aluminum and steel
Explanation:
A population of deer live in a forest ecosystem. Which of these describes a density-independent factor that could affect this population?
A. An invasive species causes increased competition for space.
B. A new predator is introduced into the ecosystem.
C. A wildfire occurs in the ecosystem.
D. The deer population's food supply decreases.
Answer:C. A wildfire occurs in the ecosystem.
Explanation: I just got it right
(VIEW PHOTO) Identify the parts of the equation by dragging each label below to the correct arrow on the diagram. Drag the items on the left to the correct location on the right.
The location are Solid, reactants, aqueous, liquid, gas.
A strong has a precise form and volume. A liquid has a particular quantity, but takes the shape of its field. A gasoline lacks either a defined form or quantity. Plasma is similar to a gasoline in that its particles are very some distance aside, but a gasoline is electrically neutral and plasma has a rate.
What's chemical response?A chemical reaction occurs while one or greater chemical substances are modified into one or greater other chemical compounds. Examples: iron and oxygen combining to make rust. vinegar and baking soda combining to make sodium acetate, carbon dioxide and water.
What's strong ?A strong is a state of be counted that keeps its form and density when now not constrained.
What are 3 forms of gases?Elemental gasses. those are the factors that exist as gasses at trendy temperature and stress.pure and mixed gases. pure gases can be made of person atoms consisting of inert gases or may be constructed from a group of various atoms which include carbon dioxide. poisonous gases.Learn more about chemical compounds here: https://brainly.com/question/26487468
#SPJ2
what is the term called when it means to lacks properties of metal?
Answer:
The used term is nonmetal.
Explanation:
Nonmetals are elements that are not shiny or are not good conductors of electricity or heat.
The periodic table has approximately 23 nonmetals in it.
In the periodic table, we can find elements. These ones could be nonmetal and metals.
The elements that lack metallic properties are the nonmetals.
Metals are good conductors of heat and electricity, like Cu or Fe.
Although, nonmetals are not good conductors.
Hello I'm always here to help!!!
___________________________
A nonmetal is an element that lacks the majority of metal's characteristics. Nonmetals make up all of the elements in the shaded boxes. On Earth, many of the nonmetals are common elements. Nonmetals have physical traits that are diametrically opposed to metals. Solid nonmetals are dull, which means they aren't gleaming.
___________________________
Have a great day!!!!
What do you notice about the Total
height lost in each set of trials?
Answer: In each set of trails, the total height lost was the same.
Explanation:
three ways in which atmosphere nitrogen can be fixed
There are three major ways in which this happens: first, by lightning, when the energy of lightning strikes breaks apart the N2 bonds; second, by industrial methods, when humans break the bonds with high pressure and temperatures, and hydrogen; finally, by biological fixation, with bacteria living in the soil.
What is the pH of a KOH solution that has [H ] = 1. 87 × 10–13 M? What is the pOH of a KOH solution that has [OH− ] = 5. 81 × 10−3 M? What is the pH of a solution of NaCl that has [H ] = 1. 00 × 10–7 M?.
pH is the hydrogen ion concentration and pOH is the hydroxide ion concentration in the solution. pH KOH is 12.73, pOH KOH is 2.24 and pH NaCl is 7.
What are pH and pOH?pH is the negative log of the hydrogen ion concentration and pOH is the negative log of the hydroxide ion concentration.
The relation between the pH and pOH can be given as, [tex]\rm pOH = 14 - pH[/tex]
The pH of KOH can be calculated by the formula,
[tex]\rm pH = \rm -log [H^{+}][/tex]
In the first case, the concentration of the KOH is [tex]1. 87 \times 10^{-13}\;\rm M[/tex]
Substituting values in the equation:
[tex]\begin{aligned} \rm pH &= \rm -log [H^{+}]\\\\&= \rm -log [1. 87 \times 10^{-13}\;\rm M ]\\\\&= 12.73\end{aligned}[/tex]
Hence, the pH of KOH is 12.73.
pOH of KOH can be calculated by the formula,
[tex]\rm pOH = \rm -log [OH^{-}][/tex]
The hydroxide concentration of the KOH solution is [tex]5. 81 \times 10^{-3}\;\rm M[/tex]
Substituting value in the equation:
[tex]\begin{aligned} \rm pOH &= \rm -log [OH^{-}]\\\\&= \rm -log [5. 81 \times 10^{-3}\;\rm M ]\\\\&= 2.24 \end{aligned}[/tex]
Hence, the pOH of KOH is 2.24
The pH of NaCl can be calculated by the formula,
[tex]\rm pH = \rm -log [H^{+}][/tex]
In the third case, the concentration of the NaCl is [tex]1. 00\times 10^{-7}\;\rm M[/tex]
Substituting values in the equation:
[tex]\begin{aligned} \rm pH &= \rm -log [H^{+}]\\\\&= \rm -log [1. 00 \times 10^{-7}\;\rm M ]\\\\&= 7 \end{aligned}[/tex]
Hence, the pH of KOH is 7.0.
Therefore, KOH is basic and NaCl is approximately neutral.
Learn more about pH and pOH here:
https://brainly.com/question/13885794
If 17. 6 g of hcl are used to produce a 14. 5 l solution, what is the ph of the solution?.
This problem is providing us with the mass of hydrochloric acid and the volume of solution and asks for the pH of the resulting solution, which turns out to be 1.477.
pH calculationsIn chemistry, one can calculate the pH of a solution by firstly obtaining its molarity as the division of the moles of solute by the liters of solution, so in this case for HCl we have:
[tex]M=\frac{17.6g*\frac{1mol}{36.46g} }{14.5L} \\\\M=0.0333 M[/tex]
Next, due to the fact that hydrochloric acid is a strong acid, we realize its concentration is nearly the same to the released hydrogen ions to the solution upon ionization. Thereby, the resulting pH is:
[tex]pH=-log(0.0333)\\\\pH=1.477[/tex]
Which conserves as much decimals as significant figures in the molarity.
Learn more about pH calculations: brainly.com/question/1195974
how many CO2 molecules exist in the following reaction? C3H8 + 5O2 >>> 3CO2 + 4H2O
Answer:
21.0g of CO2
Explanation:
what is osmosis and it's functions
Answer:
Osmosis is a passing of material and especially water through a membrane (as of a living cell) that will not allow all kinds of molecules to pass. Osmosis allows water to pass through cell membranes. The transfer of water from a dilute solution to a concentrated solution over a partly permeable membrane is defined as osmosis.
Explanation:
I hope this helps :)
* I NEED THIS *
Which of the following statements about oceans is incorrect?
A: Oceans collect water from other reservoirs including streams and rivers.
B: Oceans are the main source of drinking water on Earth's surface.
C: Oceans are connected to other reservoirs through evaporation and precipitation.
D: Oceans are the main type of reservoir that contain salt water.
Answer:
B is incorrect
Explanation:
Ocean are made of salt water which is undrinkable therefore they are not any type of drinking water source.
14. When weathering breaks down rocks with water, wears things away with wind, and scorches or freezes the earth
with temperature, it is called
weathering
15. In chemical weathering chemicals in the air mix with water to make
that eats
away at limestone rock Oxygen reacts with iron and forms
16. Erosion is the flow of water that moves rocks and sand, the push of the wind that carries sediments away and
even the movement of a
dropping pieces of rock at the bottoms of oceans and lakes.
Go onto brainpop.com and find the tutorial called Weathering. Login with sawgrassmid and poplearn.
and eventually
17. Weathering is the process that breaks down rocks into
18.
formation depends on sediments from weathering and those same bits make up sedimentary
rocks.
Answer:
14. Mechanical Weathering
15. & 16. I'm not sure
17. Smaller Pieces, Minerals I think
18. I can't remember
Explanation:
I'm not 100% sure about these but I hope they help. Sorry I couldn't do any more.
True or false, some molecules have the same molecular formula as their empirical formula.
Answer:
True, some molecules have the same molecular formula as their empirical formula.
Explanation:
The empirical formula of many compounds may be the same. Formaldehyde, for example, has the chemical formula CH2O, which is equal to the empirical formula of glucose. Each molecule of formaldehyde has one carbon atom, two hydrogen atoms, and one oxygen atom.
is the tendency of an object to resist a change in its state of motion.
Answer:
Inertia is the tendency of an object to resist changes in its state of motion.
Explanation:
hope this helps
What are bubbles (fizzes) in a soda can be described as??
Liquid to Gas or Gas to Liquid
Answer:
Liquid to Gas
Explanation:
The drink in the soda is a liquid and when you open the can, the CO2 leaves the container.
Hope this helped! :)
