Answer:
Use the stairs
Explanation:
This is easier because if you go on the stairs you can rest if you get tired but if you go on the inclined plane then the weight of the jugs will make you slower than you already are and you may end up going back down instead of up where you wanna go.
The wavelength of a particular color of yellow light is 579 nm. The energy of this wavelength of light is
Answer:
3.44× 10⁻¹⁹Joules
Explanation:
Energy of the wavelength is expressed using the formula:
E = hc/λ
h is the Planck constant
c is the velocity of light
λ is the wavelength
Given
h = 6.63 × 10^-34 m² kg / s
c = 3×10⁸ m/s
λ = 579nm = 579 × 10⁻⁹m
λ = 5.79× 10⁻⁷m
Substitute the given values into the formula
E = hc/λ
E = (6.63 × 10⁻³⁴× 3×10⁸)/5.79× 10⁻⁷
E = 19.89× 10⁻³⁴⁺⁸/5.79× 10⁻⁷
E = 19.89× 10⁻²⁶/5.79× 10⁻⁷
E = 3.44× 10⁻²⁶⁺⁷
E = 3.44× 10⁻¹⁹Joules
Hence the energy of this wavelength of light is 3.44× 10⁻¹⁹Joules
A 151 kg crate is pulled along a level surface by an engine. The coefficient of kinetic friction between the crate and the surface is 0.399. How much power must the engine deliver to move the crate at a constant speed of 6.04 m/s
Answer:
3566.26 Watts
Explanation:
From the question given above, the following data were obtained:
Mass (m) of crate = 151 kg
Coefficient of kinetic friction (μ) = 0.399
Velocity (v) = 6.04 m/s
Power (P) =?
Next, we shall determine the normal reaction. This can be obtained as follow:
Mass (m) of crate = 151 kg
Acceleration due to gravity (g) = 9.8 m/s²
Normal reaction (R) = mg
Normal reaction (R) = 151 × 9.8
Normal reaction (R) = 1479.8 N
Next, we shall determine the force applied to move the crate. This can be obtained as follow:
Coefficient of kinetic friction (μ) = 0.399
Normal reaction (R) = 1479.8 N
Force (F) =?
F = μR
F = 0.399 × 1479.8
F = 590.44 N
Finally, we shall determine the power used to move the crate as follow:
Velocity (v) = 6.04 m/s
Force (F) applied = 590.44 N
Power (P) =?
P = F × v
P = 590.44 × 6.04
P = 3566.26 Watts
Therefore, the power used to move the crate is 3566.26 Watts.
A student drops a ball off the top of building and records that the ball takes 3.82s to reach the ground. Determine all unknowns and answer the following questions. Neglect drag.
What was the ball's speed just before striking the ground?
m/s
From what height was the ball dropped?
m
Explanation:
Given parameters:
Time of drop = 3.82s
Unknown:
Final velocity of the ball = ?
Height of fall = ?
Solution:
To solve this problem, we apply the appropriate motion equation.
To find the final velocity;
v = u + gt
v is the unknown final velocity
u is the initial velocity = 0m/s
g is the acceleration due to gravity = 9.8m/s²
t is the time
v = 0 + 9.8 x 3.82 = 37.4m/s
Height of drop;
H = ut + [tex]\frac{1}{2}[/tex]gt²
So;
H = (0 x 3.82) + ( [tex]\frac{1}{2}[/tex] x 9.8 x 3.82²) = 71.5m
Sketch the electric field around these two objects if they have the same sign of charge. Make a separate drawing showing equipotential lines around the two charges. The potential is defined to be zero at infinity. Identify the line of zero potential between the two charges, if there is one.
Answer:
* far from one of the charges, the field of the other charge is small and can be neglected
* on the outside of the loads the fields are added territorially
* between the charges the two fields tend to vanish
Explanation:
The electric field around two objects with charge of the same sign, for simplicity suppose that the objects have positive point spherical charges,
E = k q / r2
bold letters indicate vectors, therefore the total electric field is
E_total = E1 + E2
the module of this field is
E_total = E1- E2
therefore we can outline this field
* far from one of the charges, the field of the other charge is small and can be neglected
* on the outside of the loads the fields are added territorially
* between the charges the two fields tend to vanish
An outline of these shows in Attachment A
The equipotential surfaces are defined as being perpendicular to the electric field lines since the electric field and the power difference are related
E = [tex]\frac{dV}{dx} i^ + \frac{dV}{dy} j^ + \frac{dV}{dz} k^ = \Delta V[/tex]
We can schematize some characteristics of these surfaces
* very close to each load are spherical surfaces
* very far from the load is an elliptical surface, which envelops the loads
* between them there is a point of zero potential point C
See attached part B
A zone plate is found to give series of images of a point source on its axis. If the strongest and the second strongest images are at distances of 0.30m and 0.06 m respectively from the zone plate (both from the same side remote from the source), calculate the distance of the source from the zone plate, principal focal length and the radius of the second zone. Assume λ = 6 x 10-7m.
What is the speed of a commercial jet which travels form New York to Los Angeles (4800) in 6 hours
Answer:
[tex]Speed = 800km}/hr[/tex]
Explanation:
Given
[tex]Distance = 4800km[/tex]
[tex]Time = 6hr[/tex]
Required
Determine the speed of the jet
The speed is calculated as:
[tex]Speed = \frac{Distance}{Time}[/tex]
Substitute 4800 km for Distance and 6hr for Time
[tex]Speed = \frac{4800km}{6hr}[/tex]
[tex]Speed = 800km}/hr[/tex]
Hence, the speed of the commercial jet is 800km/hr
A 0.323 kg ball is moving 13.9 m/s when it runs into a spring. If the spring compresses 0.350 m in bringing the ball to a stop, what is the spring constant?
Answer:
Explanation:
F = -k*x
k = F/x = (0.323*9.8)/(0.35)
k = 9.04
The kinetic energy of the spring is equal to its elastic potential energy. From this we can determine the force constant k. The force, constant of the ball here is 509.4 N/m.
What is spring constant ?The applied force f on an elastic material like a spring is directly proportional to the displacement x of the material.
Thus, f = -k x
here, the proportionality constant k is called spring constant or force constant. It can be defined as the force required to stretch or compress an elastic material by 1 m.
The elastic potential energy = 1/2 kx²
it is equal to the kinetic energy of the material if its move to form a wave like a spring.
Here, mass of the ball = 0.323 kg
velocity = 13.9 m/s
displacement = 0.350 m
then 1/2 mv² = 1/2 kx²
then k = mv²/x²
k = 0.323 kg × (13.9 m/s)²/ (0.35)² = 509.4 N/m
Therefore, the spring constant of the ball will be 509.4 N/m.
Find more on spring constant:
https://brainly.com/question/14973217
#SPJ2
Which type of physical activity is being performed in the picture?
A.
cardiovascular
B.
strength training
C.
flexibility
D.
cross training
Reset Next
What is the momentum of a 12 kg ball with velocity of 24 m/s?
Answer:
288 kg.m/sExplanation:
The momentum of an object can be found by using the formula
momentum = mass × velocity
From the question we have
momentum = 12 × 24
We have the final answer as
288 kg.m/sHope this helps you
Which two statements describe how ultrasound technology produces an
image of part of the body?
A. The amount of time it takes for a wave to return can be used to
create an image.
B. Low-frequency sound waves are reflected by tissues in the body.
C. High-frequency sound waves are reflected by tissues in the body.
D. Body tissues absorb high-frequency sound waves, producing an
image
Answer:
A,C
Explanation:
The amount of time it takes for a wave to return can be used to create an image
High--frequency sound waves are reflected by tissues in the body
Ultrasound technology produces an image of part of the body on: The amount of time it takes for a wave to return can be used to create an image and high-frequency sound waves are reflected by tissues in the body. So, option (A) and (C) is correct.
What is ultrasonic technology?Sound waves are used in ultrasound imaging to create images of the inside of the body. It aids in determining the origins of discomfort, edema, and infection in the body's internal organs as well as the examination of a developing fetus in pregnant women.
The same concepts underlie sonar used by ships, bats, and fisherman as well as those used by ultrasound imaging. A sound wave echoes or bounces back when it encounters an object. These echo waves can be measured to obtain information on the object's size, shape, and consistency as well as its distance from the source. Whether the thing is solid or liquid is included in this.
The amount of time it takes for a wave to return helps to create an image and high-frequency sound waves are reflected by tissues in the body. So, option (A) and (C) is correct.
To find more about ultrasonic, refer the link:
https://brainly.com/question/21336084
#SPJ5
You use 35 J of energy to move a 7.0N object.How far did it move
Answer:
5 metres
Explanation:
Work Done = Force x Distance
So Distance = Work done ÷ Force
= 35 ÷ 7.0
= 5 metres
Which process causes Earth to act like a magnet?
O A. Convection of hot material in the mantle
O B. Flow of water due to gravitational energy
O C. Movement of ions in the core
O D. Shifting of the tectonic plates
SUBMI
Answer:movement of iron in core
Explanatio
two cars with initial speed 2v and v, lock their brakes and skid to a stop. what is the ratio of the distance travelled
Answer:
4:1
Explanation:
Given that the initial speed of the first car, u = 2v while the initial speed of the second car, u = v. To find the distance travelled, we are going to apply one of the equations of motion. The equation chosen is
v² = u² - 2as, where
s = the distance needed
a = acceleration due to gravity
u = initial velocity which is v & 2v
v = final velocity which is 0
For the first car with initial velocity, 2v, on substituting into the equation, we have
v² = u² - 2as(1)
0 = 4v - 2as(1)
4v = 2as(1)
2v = as(1), making s(1) subject of formula we have
s(1) = 2v/a
Taking the second car, we have u = v
v² = u² - 2as(2)
0 = v - 2as(2)
v = 2as(2), making s(2) subject of formula, we have
s(2) = v/2a
Not, ratio of s1 : s2 =
2v/a : v/2a
s1/s2 = 2v/a ÷ v/2a
s1/s2 = 2v/a * 2a/v
s1/s2 = 4av/av
s1/s2 = 4/1
Therefore, the ratio of the first car to the second car is 4:1
Please leave a like if it helped you
a 45 kg boy sits on a horse on a carousel 5.0 m from the center of the circle. he makes a revolution every 8.0 s.
calculate his speed.
what is centripetal force acting on the boy?
For every complete revolution the boy makes around the center of the carousel, he travels a distance of 2π (5.0 m) = 10π m, which gives a linear speed of
v = (10π m) / (8.0 s) ≈ 3.927 m/s
Then his centripetal acceleration would be
a = v ² / (5.0 m) ≈ 3.084 m/s²
so that the centripetal force exerted on him has magnitude
F = (45 kg) a ≈ 138.791 N ≈ 140 N
(rounded to 2 significant digits)
which of the following is not a mechanical form of energy?
a. Nuclear
b. Kinetic
c. Spring potential
d. Gravitational potential
Answer:
The answer is Spring Potential
Explanation:
Because all the others are a mechanical form of energy
Select the correct answer.
Which of these factors will increase the speed of a sound wave in the air?
A. slowing down the movement of particles in the air
B. raising the temperature of the air
C. removing particles form the air
D. decreasing the kinetic energy of the air
E. stopping particle collisions in the air
Answer:
B
Explanation:
But molecules at a higher temperature have more energy.
Answer: B. Raising the temperature of the air
A gold wire that is 1.8 mm in diameter and 15 cm long carries a current of 260 mA. How many electrons per second pass a given cross section of the wire
Answer: 162500000
Explanation:
given data:
wire diameter = 1.8mm
wire length = 15cm
current = 260mA.
electron charge e = [tex]1.6*10^{-19} C[/tex]
Solution:
[tex]I = \frac{q}{t}[/tex]
where:
[tex]I = current\\\\q = charge\\\\t = time \\\\q=It\\\\q= 260mt[/tex]
[tex]q=ne\\\\n = \frac{q}{e} \\\\n= \frac{260*10^{-3} t}{1.6*10^{-19} } \\\\n= 162500000t\\\\\frac{n}{t} = 162500000[/tex]
number of electrons per seconds would be 162500000
Using a pulley, you apply a force of 10 Newtons to life an object that weighs 100 Newtons. What is the mechanical advantage of that pulley?
Answer: 10
Explanation:
The mechanical advantage of that pulley is 10.
What is mechanical advantage?The force amplified by utilizing a tool, mechanical device, or machine system is known as mechanical advantage. To achieve the desired output force amplification, the gadget trades off input forces against movement. The law of the lever serves as a paradigm for this.
Mechanisms are machine parts made to control forces and motion in this way.
Given that: the weighs of the object: W = 100 Newton.
Applied force: F = 10 N.
For using a pulley, you have to apply a force of 10 Newtons to lift an object that weighs 100 Newtons.
Hence, the mechanical advantage of the pulley is
= Weighs of the object/applied force
= 100 Newton / 10 Newton.
= 10.
The mechanical advantage of it is 10.
Learn more about mechanical advantage here:
https://brainly.com/question/16617083
#SPJ5
As an object’s speed decreases, its kinetic energy (KE) ________.
As an object’s height increases, its gravitational potential energy (PEg) ________.
1. What is the significance of the slopes of the two graphs?
2. Using the graphs, calculate the acceleration for each scenario?
3. What is the relationship between force, mass, and acceleration? Explain using data
Answer:
1. The velocity of the wagon decreases when Tradi is in the wagon because the mass increases while the external force stays constant.
2. The basic formula for calculating acceleration is a=F/a
Tommy along, acceleration: it will be 2.5 m/s^2. a=100/40
Tommy + Tradi = it will be about 1.66 m/s^2 since a=100/60
3. Well, you see, F=ma, when mass increases, the force decreases.
The relationship between mass and force is inversely proportional.
According to the graphs, velocity increases when there's less mass, which you could say that they are also inversely proportional.
Another comparison,
As the force applied on an object increases, when the mass stays constant, the acceleration also increases. Which means that they are directly proportional.
Stand in a doorway so your toes and nose are against the doorway. 4. Grab a weight in each hand and hold your arms out from your body on either side of the wall. 5. Try to stand on your tip toes. What happens
please help thank you
which of the following statements BEST describes the difference between an atom and an ion ?
Answer:
well the correct answer is
d. An atom contains equal numbers of protons and electrons whereas an ion contains unequal numbers of protons and electrons .Explanation:
A charged atom is known as an ion, well it can be negative as well as positive charge.
if atom has more protons than electrons then it get positively charged and known as cationif the atom has more electrons that the number of protons then the atom get negatively charged and known as anionin 1-2 complete sentences define "opportunity cost " in your own words
Answer:
Here you go, hope this helps! :)
Explanation:
Opportunity cost is the value of the next best thing you give up whenever you make a decision. It is "the loss of potential gain from other alternatives when one alternative is chosen". ... For example, opportunity cost is how much leisure time we give up to work.
This cantilever beam is loaded by two point loads. If the moment of inertia of the beam is 5.0*10-6 m4 and the modulus of elasticity is 210 GPa, the maximum deflection of the beam is:
Answer:
The answer is i just need the 5 pt sowwry bro hope you have luck finding it ;]
Explanation:
you prolly alr found it but it doesnt really matter
If a ball with a momentum of 40 kgm/s has a velocity of 2 m/s, what is its mass?
momentum (m)=40
velocity (v)=2
now,
momentum (m)=m×v
40=m×2
m=40÷2
m=20kg
The wavelength of a particular color of violet light is 417 nm. The energy of this wavelength of light is
Answer:
E = 4.7 x [tex]10^{-19}[/tex] Joules
Explanation:
Solution:
The wavelength of a particular color of violet light = 417 nm
What is the energy = ?
In order to calculate energy, we will use the following formula:
E = hf
where, f = frequency = 1/wavelength = c/λ
where c = speed of light = 299 792 458 m / s or 3 x [tex]10^{8}[/tex] m/s
where h = Plank's constant = 6.62x [tex]10^{-34}[/tex] [tex]m^{2}[/tex] kg / s
So,
λ = 417 nm
1 nm = [tex]10^{-9}[/tex] m
so,
λ = 417 x [tex]10^{-9}[/tex] m
Now, just plug in the values to calculate the energy of this wavelength of light.
E = hc/λ
E = ( 6.62x [tex]10^{-34}[/tex] ) (299 792 458) / (417 x [tex]10^{-9}[/tex] )
E = 0.047 x[tex]10^{-17}[/tex]
E = 4.7 x [tex]10^{-19}[/tex] Joules
the motion diagrams shown above represent cyclist 1 in the third panel above?
Answer:
A
Explanation:
Change of velocity is defined as acceleration and acceleration accounts for both change is direction and speed
g Calculate the electric potential at the center of the square with a side of 1 meter, formed by the four charged particles.
Answer:
The potential at the center of square due to four identical charges each at the corner is 5.09 q x [tex]10^1^0[/tex] Volts, where q is the charge.
Explanation:
From the question it is given that
side of square = a = 1 m
let the charge of each square is q
potential at center due to 1 charge is V = [tex]\frac{q}{4\pi \epsilon r}[/tex] , where
[tex]\epsilon[/tex] is electrical permittivity of space
r is the distance between charge and point.
since the charge is present at at the corner so the distance between charge and point is the half the length of diagonal of square.
⇒ distance between charge and point = r =[tex]\frac{a}{\sqrt{2}}[/tex] = [tex]\frac{1}{\sqrt{2} }[/tex] = 0.707 m
thus, V= [tex]\frac{q}{4\pi \epsilon r}[/tex] , on substituting the respected values of r = 0.707m and [tex]\frac{1}{4\pi \epsilon}[/tex] = 9 x [tex]10^9[/tex] we get,
V = 1.272 q x [tex]10^1^0[/tex] V
thus potential due to all 4 charges is
V = 1.272 q x [tex]10^1^0[/tex] x 4 = 5.09 q x [tex]10^1^0[/tex] Volts
Do you know how to do this clever ones hmmm?? Describe and explain the motion of a small ball floating on a pond when waves travel across the pond.
Answer:
Ball moves up and down repeatedly on surface because waves consist of successive crests and troughs moving across surface, each crest pushes ball up and each trough allows it to move down.
Explanation:
please help me!!!!!!!!!!!!!!!
Answer:
3
Explanation:
i did it