Explanation:
As an example, Let's writte some ionic compounds:
Of the elements calcium, Ca, beryllium, Be, barium, Ba, and strontium, Sr, arrange in order of decreasing atomic radii. Explain your answer using the terms electron and energy level.
Order these elements Ca, Be, Ba, and Sr:
If we take a look at the periodic table trends we will see that the atomic radii increases from left to right and from top to bottom.
So let's look for our elements:
Be: atomic number 4
Ba: atomic number 56
Ca: atomic number 20
Sr: atomic number 38
They are all Alkaline Earth Metals, they are in the same group.
So we said that the atomic radii increases from top to bottom. If we have to arrange them in order of decreasing atomic radii, we have to put first the largest one. The Barium is the one that is in a lower position, then Sr, then Ca and finally Be.
So the order of our problem is Ba, Sr, Ca and Be.
Which is the explanation?
As we move down in the periodic table the number of electrons increases. They all have 2 electrons in the outer shell. But let's look at the electronic configuration of two of them:
Ca:
Ba:
Density of gasses lawA sample of gas with a density of 0.066 g/l at 32 C and a pressure of 0.95 atm. Find the density of the gas at STP
Answer:
[tex]0.078\text{ g/l}[/tex]Explanation:
Here, we want to calculate the density of the gas at STP
We use a modification of the general gas law as follows
Mathematically:
[tex]\frac{P_1}{D_1\times T_1}\text{ = }\frac{P_2}{D_2\times T_2}[/tex]where:
P1 is the initial pressure which is 0.95 atm
D1 is the initial density which is 0.066 g/l
T1 is the initial temperature in Kelvin (we add the temperature in Celsius with 273 K : 32 + 273 = 305 K)
P2 is the pressure at STP which is 1 atm
D2 is the density that we want to calculate
T2 is the temperature at STP which is 273 K
Substituting the values, we have it that:
[tex]\begin{gathered} \frac{0.95}{0.066\times305}\text{ = }\frac{1}{D_2\times273} \\ \\ D_2\text{ = }\frac{0.066\times305}{0.95\times273}\text{ = 0.078 g/l} \end{gathered}[/tex]Define electronegativity.
A neutral atom has high electronegativity. Describe what happens to this atom during ionic bond formation.
No trolls, fake answers, copied answers
a) Electronegativity has to do with the fact that electrons are unequally shared in a bond
b) The electronegative tom would receive electrons in an ionic bond.
What is electronegativity?The term electronegativity has to do with the fact that in some atoms, the electron cloud could be closer to them in a covalent bonding situation than to the other atom. You need to recall that in a covalent bond, the electron pair of the bond is shared and the electron cloud is expected to be equidistant between the nuclei of the two atoms that are bonding.
In a case where the electron cloud seems to be closer to one atom than the other then the other atom is said to be highly electronegative. We also need to knw that in an ionic bond, there is a transfer of electrons from one atom to the other.
If one of the bonding atoms in an ionic bond is highly electronegative, it then follows that electrons would be transferred to that atom in the process of ionic bonding.
Learn more about ionic bonding:https://brainly.com/question/11527546
#SPJ1
100 points!
Why rusting is a chemical change?
1-A new reactant is formed
2-A new product is formed
3-There is increased activation energy
4-A new substance is not formed
Answer: 4
Explanation:
A cheeseburger from a fast food restaurant contains 19 g of fat, 20 g of carbohydrates and 28 g of protein. How many kcal of energy does the cheeseburger contain? (Food caloric values are 9.0 kcal/g for fats, 4.0 kcal/g for carbohydrates and 4.0kcal/g for protein). Round the answer for each type of food to the nearest tens place. A. 70. kcal B. 360 calories C. 17 calories D. 630 calories
Answer:
Example:
Here, we want to get the kcal of energy contained in the cheeseburger
To do this, we multiply the caloric values of each food type by their masses and then sum
Mathematically, we have that as:
[tex]19(9)\text{ + 20\lparen4\rparen + 28\lparen4\rparen = 363 kcal}[/tex]To the nearest tens, we have that as 360 kcal
What will be the final temperature of a 3L nitrogen gas initially exposed to a temperature of 10°C if the volume is increased to 10L assuming that the pressure is fixed at 1 atm?
Step 1
Charles's law states that the volume (V) of a gas is directly proportional to its absolute temperature. It is assumed that the pressure and the quantity of gas remain constant.
Mathematically:
[tex]\frac{V1}{T1}=\frac{V2}{T2}[/tex]-------------------
Step 2
Information provided:
T1 = 10 °C + 273 = 283 K
V1 = 3 L
---
T2 = Unknown
V2 = 10 L
-------------------
Step 3
Procedure:
[tex]\begin{gathered} \frac{V1}{T1}=\frac{V2}{T2} \\ T2\text{ =}\frac{V2}{V1}\text{ x T1} \\ T2\text{ = }\frac{10\text{ L}}{3\text{ L}}\text{ }x\text{ }283\text{ K } \\ T2\text{ = 943 K} \end{gathered}[/tex]Answer: 943 K or 670 °C
I need help on balancing the equations and on what type of reaction it is.
Given the balanced chemical reaction expressed as:
[tex]2Au_2O_3\rightarrow4Au+3O_2[/tex]A Redox reaction is a reaction that involves the transfer of electrons and changes in the oxidation state between the elements.
The given chemical equation is therefore an oxidation-reduction reaction since it involves a change in the oxidation state of the elements.
Determine the moles of Au₂O₃
[tex]\begin{gathered} \text{Mole = }\frac{Mass}{Molar\text{ mass}} \\ \text{Mole of Au}_2O_3=\frac{10g}{441.93g\text{/mol}} \\ \text{Mole of Au}_2O_3=0.02263\text{moles} \end{gathered}[/tex]According to stochiometry, you can see that 2 moles of Gold(III)oxide produce 4 moles of Gold. Hence the moles of Gold produced will be:
[tex]\begin{gathered} \text{moles of Gold=}\frac{0.02263\times4}{2} \\ \text{moles of Gold=}0.02263\times2 \\ \text{moles of Gold=}0.0453\text{moles} \end{gathered}[/tex]Determine the mass of Gold.
[tex]\begin{gathered} \text{Mass of Gold=moles}\times molar\text{ mass} \\ \text{Mass of Gold=}0.0453\times196.97 \\ \text{Mass of Gold}=8.91\text{grams} \end{gathered}[/tex]Next is determining the mole of Oxygen
According to stochiometry, you can see that 2 moles of Gold(III)oxide produce 3 moles of Oxygen. Hence the moles of Oxygen produced will be:
[tex]\begin{gathered} \text{moles of Oxygen=}\frac{0.02263\times3}{2} \\ \text{moles of Oxygen}=0.033945\text{moles} \end{gathered}[/tex]Determine the mass of oxygen produced
[tex]\begin{gathered} \text{Mass of O}_2=moles\times\text{Molar mass} \\ \text{Mass of O}_2=0.033945\times16 \\ \text{Mass of O}_2=0.543\text{grams} \end{gathered}[/tex]Hence the mass of oxygen produced is 0.543 grams
Draw electron dot structures for the following substances: a. C12, b. CO, c. CO2 d. NH3, e. CC14, f. H2O
When drawing an electron dot diagram, you need to check the exact number of electrons that an atom has in its shell, only the valence electrons must be drawn
Classify CH3CH2NH2 as astrong base or a weak base.Strong BaseWeak Base
Answer:
CH3CH2NH2 is a weak base.
Explanation:
CH3CH2NH2 is a weak base since its Kb is small, and thus it partially dissociates.
Starting with a gas of N2 in a balloon of temperature 148.5°C and volume 241.8mL, what is its final volume if you cool it to -96.4°C?
Answer
101.3 mL
Explanation
Given:
The initial temperature, T₁ = 148.5 °C = (148.5°C + 273) = 421.5 K
The initial volume, V₁ = 241.8 mL
Final temperature, T₂ = -96.4 °C = (-96.4°C + 273) = 176.6 K
What to find:
The final volume of the gas.
Step-by-step solution:
The final volume, V₂ of the gas can be calculated using Charle's law formula.
[tex]\begin{gathered} \frac{V_1}{T_1}=\frac{V_2}{T_2} \\ \\ \Rightarrow V_2=\frac{V_1\times T_2}{T_1}=\frac{241.8mL\times176.6K}{421.5K}=\frac{42701.88\text{ }mL}{421.5} \\ \\ V_2=101.3\text{ }mL \end{gathered}[/tex]The final volume of the gas is 101.3 mL
A gas is confined to a cylinder under constant atmospheric pressure,. When the gas undergoes a particular chemical reaction , it releases 135 kJ of heat to its surroundings and does 63 KJ of P-V Work on its surroundings. What are the values of ∆H and ∆E for this process ?
Answer:
[tex]\begin{gathered} \triangle H=-135kJ \\ \triangle E=-198kJ \end{gathered}[/tex]Explanations:
From the question, we are given the following
Amount of heat released to the surroundings = 135kJ
Work done to its surroundings q = 63 kJ
The derivation of the enthalpy at constant pressure is expressed as;
[tex]\triangle H=\triangle U+\triangle(P_{int}V)[/tex]where;
[tex]\begin{gathered} \triangle U\text{ is the internal energy} \\ P_{int_{}}\text{ is the internal pressure} \\ V\text{ is the volume of the gas} \end{gathered}[/tex]Since the cylinder gas is under constant pressure, then the enthalpy will be equal to the work done to have:
[tex]\triangle H=q[/tex]Since q = 63kJ, hence;
[tex]\triangle H=q=-135kJ[/tex]Next is to calculate the change in the change in the internal energy
Using the law of energy conservation which states that the change in internal energy is equal to the heat transferred to, less the work done by, the system. Mathematically;
[tex]\begin{gathered} \triangle E=q+W \\ \triangle E=-135kJ+(-63kJ) \\ \triangle E=-198kJ \end{gathered}[/tex]Hence the change in internal energy for the process is -198kJ
what is the molar mass of anhydrous solid, mol
what is the molar mass of anhydrous solid, mol?
Andrew wants to become a certified forensic pathologist. What is MOST likely to be true about his path to achieve this goal?
A.
It is fairly easy and doesn’t take a long time.
B.
There is no required residency or clinical fellowship.
C.
It requires a medical degree like a regular doctor.
D.
There are no schools that are currently offering this training.
Answer:
A
Explanation:
it is easy and doesn't take a long time
What kind of intermolecular forces act between a chloramine (NH₂CI) molecule and an oxide (0²-) anion?Note: If there is more than one type of intermolecular force that acts, be sure to list them all, with a comma between thename of each force.
Answer
Hydrogen bonding, dipole-dipole interaction, and dispersion forces.
Explanation
The chloramine (NH₂CI) molecule has N-H bonds, so there will be hydrogen bonding. Also, NH₂Cl is a polar molecule, so there will be dipole-dipole interaction. And as with molecules like O²⁻, there will be dispersion forces.
Therefore, the kind of intermolecular forces that act between a chloramine (NH₂CI) molecule and an oxide (O²⁻) anion are hydrogen bonding, dipole-dipole interaction, and dispersion forces.
Of the following EM waves, which has the highest frequency?A.X-raysB.Ultraviolet lightC.MicrowavesD.Infrared light
Answer
A. X-rays
Explanation
There are seven regions in the electromagnetic spectrum (EM) which in order of lowest to highest frequency are:
Radio waves, microwaves, infrared, visible light, ultraviolet, X-rays, and gamma rays.
Therefore, of the following EM waves given in the options, the one that has the highest frequency is A. X-rays
Which is a common use for a type of electromagnetic radiation?
A tanning bed uses microwaves.
Water purification uses radio waves.
Thermal imaging uses infrared waves.
Weather radar uses ultraviolet waves.
Common use for a type of electromagnetic radiation is Thermal imaging uses infrared waves.
When magnetic field comes in contact with electric field than electromagnetic radiations are formed. The magnetic field and the electric field are perpendicular to each other. types of electromagnetic waves are : Radio waves, Microwaves, Infrared waves, Visible light , Ultraviolet waves, X- rays , gamma rays.
A tanning bed uses the ultraviolet waves
water purification uses the UV waves
Thermal imaging uses the infrared waves
weather radar use the Radio waves
Thus, Common use for a type of electromagnetic radiation is the Thermal imaging uses infrared waves.
To learn more about electromagnetic waves here
https://brainly.com/question/4284608
#SPJ1
A 1.6700 g sample of pure compound was analyzed and found to contain 0.1870 ghydrogen, 0.8899 g carbon with the remainder being oxygen. What is the molecularformula of the unknown compound if its molar mass is 90.14 g/mol.?
Answer: C4H10O2
Explanation:
At first find the percentage composition, in 1.67 g compound what percentage of Carbon, Hydrogen and Oxygen are there. Then from those percentages through unitary method find out how much Carbon, Hydrogen and Oxygen would be there in 90.1 g of compound. From those amounts finds their mole number, as in divide the obtained amount by their gram equivalent mass. The numbers you obtain are the corresponding number of Carbon Hydrogen and Oxygen in one molecule of the compound. Hope this helps
10. What is the Arrhenious definition for acids and bases? Why do we use thisdefinition?
ANSWER
Definition of an acid; is a substance that produced hydrogen ions (H+) as the only positive ion when dissolved in water or in an aqueous solution. it increases the concentration of hydrogen ions in an aqueous solution.
Definition of the base; are hydroxide compounds that give hydroxide ion (OH-) on dissociation in water. it increases the concentration of hydroxide ions in an aqueous solution.
Why do we use the definition: it helps us to understand the acid-base properties of substances in an aqueous medium. neutralization, hydrolysis, and strength of acids and bases
EXPLANATION:
Arrhenius defined acid and base in the following way
According to Arrhenius, he defined an acid as a substance that produced hydrogen ions (H+) as the only positive ion when dissolved in water or in an aqueous solution. it increases the concentration of hydrogen ions in an aqueous solution.
[tex]\begin{gathered} \text{According to Arrhenius} \\ HA_{(aq)}\rightleftarrows H^{+_{}}_{(aq)}+A^-_{(aq)} \end{gathered}[/tex]Bases are hydroxide compounds that give hydroxide ion (OH-) on dissociation in water. it increases the concentration of hydroxide ions in an aqueous solution.
[tex]\text{BOH}_{(aq)}\rightleftarrows B^+_{(aq)}+OH^-_{(aq)}[/tex]Arrhenius's definition of acid and base is still in use because it helps us to understand the acid-base properties of substances in an aqueous medium. neutralization, hydrolysis, and strength of acids and bases
Ozone molecules in the upper atmosphere absorb radiation. If the radiation has a wavelength between 240 nm and 310 nm, the ozone molecules will decompose into oxygen molecules and oxygen atoms. The oxygen atoms then recombine with the oxygen molecules to make more ozone, releasing heat. This converts light energy into heat energy and insulates the Earth. ***** O3(g) → O2(g) + O(g) -> light energy absorbed heat energy released O2(g) + O(g) 03(g) a) What kind of electromagnetic radiation has a wavelength between 240 and 310 nm? b) Which wavelength represents the minimum amount of energy required for this reaction to proceed: 240 nm or 310 nm? c) Calculate the minimum amount of light energy that must be absorbed to convert 1 mole of ozone into oxygen molecules and atoms. Report your answer in kJ/mol. [4 Marks]
a)ultraviolet rays
Explanation:
ultraviolet rays are electromagnetic waves that are found in the range of 240 and 310 somewhere in between the electromagnetic spectrum
b)310nm causes minimum energy because the ultraviolet rays have reacted with oxygen to produce zone
c) 310nm to
=3.1×10^-7m once converted find the frequency using the converted wavelength as your wavelength AND once that has been done find your
E=hv=6.626×10^-34×9.68×10^14=6.414×10^-10J convert J to KJ/MOL will be 386.3KJ/MOL.
If 30.0 mL of 0.150 M CaCl2 is added to 22.0 mL of 0.100 M AgNO3, what is the mass of the AgCl precipitate?
If 30.0 mL of 0.150 M CaCl2 is added to 22.0 mL of 0.100 M AgNO3 then 0.0022 moles AgNO3 will be precipitated.
The balanced chemical equation can be written as:
[tex]2AgNO_{3}[/tex] + [tex]CaCl_{2}[/tex] → 2AgCl + [tex]Ca(NO_{3} )_{2}[/tex]
Molecular Weight of CaCl2 = 110.98 g/mol
[tex]Ca(NO_{3} )_{2}[/tex] =170.01
AgCl = 143.45 g/mol
Volume of calcium chloride ([tex]CaCl_{2}[/tex] ) =30.0mL
1 ml = [tex]10^{-3}[/tex] L
So, 30 ml =0.03L
[tex]AgNO_{3}[/tex] = 22 mL= 0.022 L
1 ml = [tex]10^{-3}[/tex] L
So, 22 ml =0.022 L
By solving for the limiting reactant one needs to get the moles [tex]CaCl_{2}[/tex]and mols [tex]AgNO_{3}[/tex].
calcium chloride ( [tex]CaCl_{2}[/tex] ) = 0.150M(mol/L) × 0.03L = 0.0045 moles
Silver nitrate ([tex]AgNO_{3}[/tex] ) = 0.100M ×0.022L = 0.0022 moles
Since the stoichiometric ratio of Silver nitrate ( [tex]AgNO_{3}[/tex] ) to calcium chloride ( [tex]CaCl_{2}[/tex]) is 2:1
0.0022 mols [tex]AgNO_{3}[/tex] × (1 mol [tex]CaCl_{2}[/tex] / [tex]AgNO_{3}[/tex] 2 mols ) = 0.00085 mols [tex]CaCl_{2}[/tex] .
Therefore, 0.0022 moles [tex]AgNO_{3}[/tex] will be obtained.
To know more about precipitated.
https://brainly.com/question/28238910
#SPJ1
How many moles of carbon dioxide are formed when reacting with 36 moles of oxygen?
1) Chemical equation
[tex]CH_4+2O_2\rightarrow CO_2+2H_2O[/tex]2) Moles of CO2 produced oxygen reacts
The molar ratio
2 mol O2: 1 mol CO2
[tex]molCO_2_{}=36molO_2\cdot\frac{1molCO_2}{2molO_2}=18molCO_2[/tex]If 36 mol O2 reacts, it will produce 18 mol CO2.
.
A 5.325-gram sample of methyl benzoate, a compound used in the manufacture of perfumes, is found to contain 3.758 g carbon, .316 g hydrogen, and 1.251 grams of oxygen. What is the empirical formula for this substance?
Answer
The empirical formula for the compound is C₄H₄O₁Explanation
Given:
Mass composition: 3.758 g carbon, 0.316 g hydrogen, and 1.251 grams oxygen.
What to find:
The empirical formula for the substance.
Step-by-step solution:
The first step is to convert the number of grams of each element into moles as shown below using the molar masses of H = 1.00784 g/mol and C = 12.011 g/mol and O = 15.999 g/mol
Note: Mole = Mass/Molar mass
Moles C = 3.758g/12.011 g/mol = 0.31 mol
Moles H = 0.316g/1.00784 g/mol = 0.31 mol
Moles O = 1.251g/15.999 g/mol = 0.078 mol
Now, let's divide the number of moles of each element by the smallest number obtained:
C = 0.31/0.078 = 4
H = 0.31/0.078 = 4
O = 0.078/0.078 = 1
The empirical formula for the compound is C₄H₄O₁
what is the volume (in L) in a cylinder filled with 23.0 g of N2 gas at a temperature of 65 C and a pressure of 2.37 atm?
The volume of the cylinder filled with 23.0 g of N₂ gas at a temperature of 65 °C and a pressure of 2.37 atm is 9.6 L
Given that,
Mass of the nitrogen gas in the cylinder (m) = 23 g
Temperature (T) = 65 ℃ = 65 + 273 = 338 K
Pressure (P) = 2.37 atm
R (gas constant) = 0.082057338 L.atm.K⁻¹.mol⁻¹
In Ideal gas law or general gas equation,
PV = nRT
Number of moles in nitrogen (n) = Given mass (m) of nitrogen/ Molar mass of nitrogen
Given mass (m) = 23 g
Molar mass of Nitrogen = 28 g/mol
Number of moles of nitrogen (n) = 23 / 28 = 0.82 moles of nitrogen
PV = nRT
2.37 * V = 0.82 * 0.0821 * 338
2.37 * V = 22.75
V = 22.75 / 2.37
V = 9.6 L
To know more about Molar mass
https://brainly.com/question/22997914
#SPJ1
A 150 g piece of iron (Cp = 25.09 J/(mol-°C)) was heated to a temperature of
47°C and then placed in contact with a 275 g piece of copper at 20°C (Cp = 25.46
J/(mol-°C)). What is the final temperature of the two pieces of metal?
Final temperature of the two pieces of metal is 32.25°C
Temprature is the degree of hotness or coldness of the object
Here given data is
Mass of iron = 150 g
Mass of copper = 275 g
Specific heat of iron = 25.09 J/mol°C
Specific heat of copper = 25.46J/mol°C
Temprature in iron = 47°C = initial temprature = T₁
Temprature in copper = 20°C = initial temprature = T₁'
So here we have to find final temprature of two pieces of metal =?
So, the formula is Q =mcΔT
Q = (150 g - 275 g) × (25.09 J/mol°C - 25.46J/mol°C) × ( 47°C-20°C )
Q = 125×0.37×27
Q = 243 J
243 J/125×0.37 = 5.25°C = change in temprature
Initial temprature = 27°C
Final temprature = ?
ΔT = T₂ - T₁
27°C = T₂ - 5.25°C
T₂ = 27°C + 5.25°C
T₂ = 32.25°C
Final temperature of the two pieces of metal is 32.25°C
Know more about metal
https://brainly.com/question/21265758
#SPJ1
HELP ASAP PLEASE. A legend is a traditional story that explains something in real life. Sometimes they are accepted as true, but sometimes they are fantastical and just plain fun. There are many legends that surround the North Star explaining its creation as well as why it is stationary.
Take some time to research some of the legends of the North Star. After you have had a chance to read several of them, create your own fantastical story of the North Star. It can be how it came to be or explain why it is stationary.
A legend of the North star goes as follows:
Once upon a time, when God was creating the universe, the curious star Tam once he learned that God was humans on earth, he began visiting humans. He became fond of one human. But each time he had to return to the sky, the human could not see him again. Therefore, he decided to remain stationary so that the human can always locate him.What is the North Star?The North star is a star that sits directly above the North pole of the earth. It is also known as Polaris.
The North star is especially significant in that the North star is an ever-present star in the skies. It neither rises nor sets unlike other stars in the skies.
Because of this special feature of the North star, it serves as a guiding beacon in the skies for travelers. Also, several legends have been told about the North star.
Learn more about the North star at: https://brainly.com/question/1130377
#SPJ1
stomach acid has a pH of 1 and tomatoes have a pH of 4. How many times stronger than tomatoes is stomach acid?
We must take into account the definition of pH, and this represents the concentration of H+ ions([H+]). It can be defined with the following equation:
[tex]pH=-\log \lbrack H^+\rbrack[/tex]To determine how many times the acid is stronger than the tomato, we must calculate the concentration of H+ ions for each pH value, to do so we clear [H+] from the previous equation:
[tex]\lbrack H^+\rbrack=10^{-pH}[/tex]Now we substitute each pH value into the equation:
[tex]\begin{gathered} \lbrack H^+\rbrack_{StomachAcid}=10^{-1} \\ \lbrack H^+\rbrack_{\text{Tomatoes}}=10^{-4} \end{gathered}[/tex]Therefore we will have to:
[tex]\frac{\lbrack H^+\rbrack_{StomachAcid}}{\lbrack H^+\rbrack_{\text{Tomatoes}}}=\frac{10^{-1}}{10^{-4}}=\frac{1}{10^{-3}}=10^3=1000[/tex]Therefore, stomach acid will be 1000 times stronger than the tomatoes.
How many groups are attached to a center atom with trigonal planar geometry? 3 groups 1 group 5 groups 4 groups
Answer:
The number of groups attached to a center atom with trigonal planar geometry is 3 groups.
What is the Organic compound shown? A) PropyneB) 1-ButeneC) 1-ButyneD) Acetylene
ANSWER
1-Butyne
STEP-BY-STEP EXPLANATION:
To name the below structure, we need to consider the following
0. The number of carbon atoms present in the structure
,1. The type of bond and the location
According to the structure given, we have four carbon atoms
These four carbon atoms mean Butane according to the alkane family
We have a tripple bond in between the first and second carbon atom
Since we have a tripple bond, the -ane in butane will be changed to -yne
Hence, the name of the structure is 1-Butyne
Some cracker tins include a glass vial of drying material in the lid to keep the crackers crisp. In many cases, the material is a mixture of magnesium sulfate and cobalt chloride indicators. As the magnesium sulfate absorbs moisture (MgSO4 ∙ H2O + 6H2O MgSO4 ∙ 7H2O), the indicator changes color from blue to pink (CoCl2 ∙ 4H2O + 2H2O CoCl2 ∙ 6H2O). When this drying mixture becomes totally pink, it can be restored if it is heated in an oven. What two changes are caused by the heating?
The two indicators given are there to absorb water or moisture. So when the indicator is totally pink it means it has been used to its total potential.
By heating the indicator, this can evaporate the water from the indicator, thus restoring it. This means that the indicator will go back to its blue color and it can be re-used.
So the two changes caused by heating:
1. Indicator changes color back to blue.
2. Water is evaporated from the indicator.
Write a balanced chemical reaction for each of the following double replacement reactions:
a. Hydrochloric acid reacts with sodium hydroxide.
b. Hydrochloric acid reacts with barium hydroxide.
c. Hydrochloric acid reacts with ammonium hydroxide
Balanced chemical reaction for each of the following double replacement reactions:
a) HCl + NaOH -----> NaCl + H₂O
b) 2HCl + Ba(OH)₂ ----> BaCl₂ + 2H₂O
c) 3HCl + Al(OH)₃ ----> AlCl₃ + 3H₂O
Balanced chemical reaction is when the number of atoms in the reactant sides are equal to the no. of atoms in product side.
a) Hydrochloric acid reacts with sodium hydroxide.
HCl + NaOH -----> NaCl + H₂O
b) Hydrochloric acid reacts with barium hydroxide.
2HCl + Ba(OH)₂ ----> BaCl₂ + 2H₂O
c) Hydrochloric acid reacts with ammonium hydroxide
3HCl + Al(OH)₃ ----> AlCl₃ + 3H₂O
Thus, Balanced chemical reaction for each of the following double replacement reactions:
a) HCl + NaOH -----> NaCl + H₂O
b) 2HCl + Ba(OH)₂ ----> BaCl₂ + 2H₂O
c) 3HCl + Al(OH)₃ ----> AlCl₃ + 3H₂O
To learn more about Balanced chemical reaction here
https://brainly.com/question/14263388
#SPJ1
