Is acid rain a global or a regional concern ?

Answer:

B the rides are to the sun

Answer:

The answer is b

Explanation:

Answer:

[tex]V=14.76mL[/tex]

Explanation:

Hello!

In this case, since the given 5.00 % (w/v) can also be represented in terms of mass of solute over volume of solution, we need to make sure that the same system of units is used, in this case, the appropriate units for that unit of concentration should be g/mL, and therefore, we first need the mass of citric acid in grams:

[tex]m=738mg*\frac{1g}{1000mg} =0.738 g[/tex]

Thus, by using the w/v percent, we obtain the following volume of solution:

[tex]V=\frac{m}{m/w}*100\%[/tex]

So we plug in to obtain:

[tex]V = \frac{0.738g}{5.00\%}*100\% \\\\V=14.76mL[/tex]

Best regards!

Answer:

The arrow going directly from the sun to the earth (middle one)!

Explanation:

HOPE THIS HELPS! :)

Answer:a

Explanation:

It can be tested and have a control, etc.

A hypothesis is a statement which can be confirmed experimentally. The correct answer is option A: Sodium metal reacts violently with water.

A hypothesis is a statement that can be confirmed by testing it. In other words, a hypothesis must be subjected to an experiment in order to ascertain whether it is true or false.

The only statement that can easily be confirmed experimentally in the laboratory is "Sodium metal reacts violently with water." Hence, this statement represents a valid hypothesis.

Learn more: https://brainly.com/question/17216882

Answer:20

Explanation:

The number of atoms that are present in 4Al₂O₃ is 24×10²³atoms.

Avogadro's number is the number of entities that are present in one mole of any substance, i.e.

1 mole = 6.022 × 10²³ atoms

Coefficient present in the given compounds gives idea about the moles of that substance. In 4Al₂O₃ number of moles of Al₂O₃ is 4.

Number of atoms of Al₂O₃ in 4 mole = 4mol × 6.022 × 10²³atoms/mol = 24×10²³atoms

Hence number of atoms of Al₂O₃ in 4 moles of 4Al₂O₃ is 24×10²³atoms.

To know more about Avogadro's number, visit the below link:

https://brainly.com/question/1513182

#SPJ2

Answer: a. [tex]2CH_4+2NH_3+3O_2\rightarrow 2HCN+6H_2O(g)[/tex]  

b. [tex]CH_4[/tex] is the limiting.

c. 13.5 g of hydrogen cyanide will be formed

Explanation:

To calculate the moles :

[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]    

[tex]\text{Moles of methane}=\frac{8g}{16g/mol}=0.50moles[/tex]

[tex]\text{Moles of ammonia}=\frac{10g}{17g/mol}=0.59moles[/tex]

The balanced reaction will be :

[tex]2CH_4+2NH_3+3O_2\rightarrow 2HCN+6H_2O(g)[/tex]  

According to stoichiometry :

2 moles of [tex]CH_4[/tex] require  = 2 moles of [tex]NH_3[/tex]

Thus 0.5 moles of [tex]CH_4[/tex] will require=[tex]\frac{2}{2}\times 0.5=0.5moles[/tex]  of [tex]NH_3[/tex]

Thus [tex]CH_4[/tex] is the limiting reagent as it limits the formation of product and [tex]NH_3[/tex] is the excess reagent as it is present in more amount than required.

As 2 moles of [tex]CH_4[/tex] give = 2 moles of [tex]HCN[/tex]

Thus 0.5 moles of [tex]CH_4[/tex] give =[tex]\frac{2}{2}\times 0.5=0.5moles[/tex]  of [tex]HCN[/tex]

Mass of [tex]HCN=moles\times {\text {Molar mass}}=0.5moles\times 27g/mol=13.5g[/tex]

Thus 13.5 g of [tex]HCN[/tex] will be produced from the given masses of both reactants.

Answer:

[tex]m_{Cr_2O_3}^{actual}=62.4gCr_2O_3[/tex]

Explanation:

Hello!

In this case, according to the reaction:

[tex]4Cr+3O_2\rightarrow 2Cr_2O_3[/tex]

We can see there is a 4:2 mole ratio between chromium and chromium (III) oxide, this, for the given 56.2 g of chromium, the theoretical yield of the oxide product is computed down below:

[tex]m_{Cr_2O_3}^{theoretical}=56.2gCr*\frac{1molCr}{52.0gCr}*\frac{2molCr_2O_3}{4molCr} *\frac{151.99gCr_2O_3}{1molCr_2O_3} =82.13gCr_2O_3[/tex]

Now, considering the 76.0-% yield for this reaction, the actual yield turns out:

[tex]m_{Cr_2O_3}^{actual}=82.13gCr_2O_3*\frac{76.0gCr_2O_3}{100gCr_2O_3} \\\\m_{Cr_2O_3}^{actual}=62.4gCr_2O_3[/tex]

Best regards!

ANSWER: 3020.8 moleclues of water (h20)           Explanation I did the math and the quiz

Answer:

A

Explanation:

An ion is a particle, atom or molecule with a net electrical charge.

Answer:

C. An element that has an unequal number of protons and electrons

Explanation:

An element has an equal number of protons and electrons, because the positive and negative energy has to cancel out so the atom is neutral. Ions are versions of atoms that lose electrons so they have a different energy than the initial atom, but they're still that atom because the number of protons determines the identity of the atom, and that number doesn't change.

Answer:

Explanation:

It probably would have been broken down to smaller pieces and spread out around the world. Hope this help! :)

This question is incomplete, the complete question is;

The weight loss of an aluminum alloy corroding in a solution of hydrochloric acid was observed to be 0.250 g/cm² after an 8 h immersion period [13]. What is the corresponding anodic current density in milliamperes per square centimeter, assuming that all the corrosion is due to the following anodic half-cell reaction:

Al → Al³⁺ + 3e⁻

The atomic weight is 58.7 g/mol

Answer:

Current density in milliamperes per square centimeter is 45.81 mA/cm²

Explanation:

Given the data in the question;

we know that Faradays law of electrolysis states that;

amount of substance produced at each electrode is directly proportional to the quantity of charge flowing through the cell.

so

m = ( Q/F) (M/z)

where m is the mass of substance liberated at an electrode( 0.250 g/cm²)

Q is the total electric charge passed through the substance

F is Faradays constant (96,500 C/mol)

M is the molar mass of the substance( 58.7 g/mol )  and Z is the number of electrons transferred(3)

Also

we know that; Q = It

where I is current and t is time( 8hrs × 60 × 60 = 28800 sec )

we substitute  Q = It  into our equation'

we have;

m = ( It/F) (M/z)

m = ItM / Fz

mFz = ItM

I = mFz / tM

so we substitute

I = [0.250 g/cm² × 96,500 C/mol × 3] / [ 28800 × 58.7 g/mol]

I = 72375 /  1690560

I = 0.04581 A/cm²

we know that; 1 ampere = 1000 milliampere

so

I = 0.04581 × 1000

I = 45.81 mA/cm²

Therefore, current density in milliamperes per square centimeter is 45.81 mA/cm²

Answer:

2.3?

Explanation:

To see the number of atoms of an element in a given molecule we need to multiply stoichiometry to the number that is written on the foot of the element that is stoichiometry. Therefore, each atom in the foil was composed mostly of empty space because most alpha particles directed at the foil.

Atom is the smallest particle of any element, molecule or compound. Atom can not be further divided. Atoms contains nucleus in its center and electron that revolve around the atom in fixed orbit.

In the nucleus, proton and neutron are present. Electron has -1 charge while proton has +1 charge. Neutron is neutral that is it has no charge. So overall the charge of nucleus is due to only proton, not by neutron.

Each atom in the foil was composed mostly of empty space because most alpha particles directed at the foil. This conclusion was the direct result of the gold foil experiment.

To know more about atom, here:

https://brainly.com/question/13518322

#SPJ2

Answer: im only in 6th grad sory

Explanation:

Answer:

the entropy of this system is 4.9452  × 10⁻²³ J/K

Explanation:

Given the data in the question;

we take a look at the Boltzmann formula for entropy;

s = k × In( W )

k is the Boltzmann's constant ( 1.38 × 10⁻²³ m² kg s⁻² K⁻¹ )

W is the number of energetically equivalent possible microstates or system configurations ( 36 )

so we substitute

s = 1.38 × 10⁻²³  × In( 36 )

s = 1.38 × 10⁻²³ × 3.5835

s = 4.9452  × 10⁻²³ J/K

Therefore, the entropy of this system is 4.9452  × 10⁻²³ J/K

Answer:

A - combustion

B - photosynthesis

C - respiration

The chemical change involved in each action is combustion, photosynthesis and respiration respectively.

Chemical changes are defined as changes which occur when a substance combines with another substance to form a new substance.Alternatively, when a substance breaks down or decomposes to give new substances it is also considered to be a chemical change.

There are several characteristics of chemical changes like change in color, change in state , change in odor and change in composition . During chemical change there is also formation of precipitate an insoluble mass of substance or even evolution of gases.

There are three types of chemical changes:

1) inorganic changes

2)organic changes

3) biochemical changes

During chemical changes atoms are rearranged and changes are accompanied by an energy change as new substances are formed.

Learn more about chemical change,here:

https://brainly.com/question/23693316

#SPJ7

Answer:

the IS unit for measuring the amount of a substance

Explanation:

that's what it is

Answer:

It is Likely to Be Sodium (Na) coz as You Down The group the reactivity increase

Answer:

Compound 1 - Can't decide

Compound 2 - Can't decide

Compound 3 - molecular

Explanation:

The solid that has been designated as compound 1 is difficult to really classify because, we can see that the solid only became hot when heated but does not soften. This can be an attribute of an ionic solid. However, the same solid is not soluble in water. This insolubility in water is a property of molecular solids. As a result of these, we will find it difficult to classify the solid.

Compound 2 is also difficult to decide upon because ionic solids are crystalline and can not be ground into powder. Amorphous substances can be ground into powder easily. Then, we can see that the substance does not conduct electricity in block form but does so when moistened. This means that we can not conveniently classify it as a molecular solid since molecular substances do not conduct electricity.

A molecular substance usually has a low melting and freezing point and also does not conduct electricity hence compound 3 is molecular solid.

Answer:

For both cases the answer is C

Explanation:  

We can see that the orbitals are not filled in the order of increasing energy and the Pauli exclusion principle is violated because it does not follow the correct order of the electron configuration; In the first exercise after the 2s2 orbital, the 2p2 orbital follows.

For the second exercise, you must start in order with level 1 and correctly filling each of the sublevels corresponding to each level until reaching level 7 and thus completing the desired number of electrons.

The Pauli exclusion principle shows the correct sequence of filling electrons into orbitals.

For the electron configuration; 1s22s23s2, we can see that the orbitals are not filled in order of increasing energy because the 3s orbital follows the 2p orbital which has been omitted.

For the configuration; Rn]7s26d4, the orbitals are not filled in order of increasing energy because the 6d orbital follows the 5f orbital and not the 7s orbital as written.

For the configuration; [Ne]3s23d5, orbitals are not filled in order of increasing energy and the Pauli exclusion principle is violated. one of the electrons in the 3s and 3d levels will have exactly the same value for all four quantum numbers.

The order of increasing energy of atomic orbitals is; 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p.

Learn more: https://brainly.com/question/8155254

Answer:

[tex]\lambda=1.94\times 10^8\ m[/tex]

Explanation:

Given that,

The frequency of a wave, f = 1.54 Hz

We need to find the wavelength of the wave.

The relation between wavelength, frequency and speed is given by :

[tex]c=f\lambda\\\\\lambda=\dfrac{c}{f}\\\\\lambda=\dfrac{3\times 10^8}{1.54}\\\\\lambda=1.94\times 10^8\ m[/tex]

So, the wavelength of the wave is [tex]1.94\times 10^8\ m[/tex].

The number of particles of atoms depends on the ratio of their composition in the compound

Given

5.432 g of table sugar

Required

moles of sample

moles of C, H and O

number of atoms

Solution

Table sugar : Sucrose : C₁₂H₂₂O₁₁

= 5.432 : 342,3 g/mol

= 0.016

C = 12 x 0.016 = 0.192

H = 22 x 0.016 = 0.352

O = 11 x 0.016 = 0.176

C = 0.192 x 6.02 x 10²³ = 1.16 x 10²³

H = 0.352 x 6.02 x 10²³ = 2.12 x 10²³

O = 0.176 x 6.02 x 10²³ = 1.06 x 10²³

Answer:

This kind of interaction can be expected between any polar molecule and non-polar/symmetrical molecule. The induction-interaction force is far weaker than dipole–dipole interaction, but stronger than the London dispersion force.

Answer:  Pb(NO3)2(aq) + 2KI(aq)  —> PbI2(s) + 2KNO3(aq)

1.57x10^22 atoms of Pb

87% yield

Explanation:

10.0 g Pb(II) nitrate = 10/333 moles = 0.03 moles

12.0 g KI = 12/166 moles = 0.072 moles (0.06 moles required)

11.4 g PbI2 = 11.4/421 moles = 0.026 moles

expected yield 0.03 moles, yield = 87%

atoms in 11.4 g = 0.026 moles = 0.026*6.02214076*10^23 atoms = 1.57*10^22

Answer:

Susie cooked sausages on a barbecue. (a) Fat and water in the sausages changed state. Draw one line from each statement to the correct change of state.

Explanation:

brailest/ crown please

Answer:

no of valence electrons

Explanation:

because valence electrons are the electrons present in the outer orbital

Answer:

its actually the number of shells

Explanation:

valence electrons are the same down any group. atomic orbitals, or shells, are the same across periods