Answers
Related Questions
5. Annie drags her little red wagon with a mass of 5.00 kg, up a hill that has an angle of
elevation of 30.09. She applies the force of 150 N parallel to the incline. Assume that
the wagon starts from rest at the bottom of the hill, and neglect friction (4 points)
a) What is the value of the acceleration of the wagon?
Answers
Answer: [tex]25.08\ m/s^2[/tex]
Explanation:
Given
mass of wagon m=5 kg
elevation
[tex]\theta =30.9^{\circ}\\F=150\ N[/tex]
Sin component of weight will oppose the applied force therefore we can write
[tex]F-W\sin \theta=ma\\where\\W=weight(mg)\\a=acceleration[/tex]
[tex]150-5\times 9.8\times \sin (30.09)^{\circ}=5\times a\\125.43=5a\\a=25.08\ m/s^2[/tex]
An LED light bulb is favored over an incandescent light bulb because it is more , what?
Answers
An LED light bulb is favoured because it is more bright.
An LED light is favored over an incandescent light bulb because it is more bright than the incandescent bulb.
What is an LED bulb?An LED is a light emitting diode. It is used widely for the production of light because it shows some advantages which include:
Many traditional lighting systems like the incandescent bulbs turn more than 90% of the energy which they use to heat, allocating only about 10% of energy to actual light production. LEDs emit almost no heat energy, and most of the light energy they emit is within the visible spectrum.
LEDs use much less energy than that of incandescent bulbs because the diode light is much more efficient, power-wise, than the filament light. LED bulbs use more than 75% less energy than those of incandescent lighting.
Learn more about LED bulb here:
https://brainly.com/question/30272515
#SPJ6
A boy pulls his toy on a smooth horizontal surface with a rope inclined at 60 degree to the horizontal if the effective force pulling the toy along the horizontal surface is 5 Newton calculate the tension in the rope
Answers
Answer:
Tension = 2.5 N
Explanation:
Given:
Angle = 60°
Force f = 5 N
Find:
Tension
Computation:
Tension = fcosθ
Tension = (5)cos60
Tension = (5)(1/2)
Tension = 2.5 N
this is an area where two tectonic plates move towards each other with one going under the other plate?
Answers
Answer:Convergent boundaries are areas where plates move toward each other and collide. These are also known as compressional or destructive boundaries. Subduction zones occur where an oceanic plate meets a continental plate and is pushed underneath it. Subduction zones are marked by oceanic trenches.
pLS THANK ME AND VOTE ME BRAINLIEST ME
Explanation:
Shuffling your feet across the floor as you walk is an example of
A) charging by friction
B) induction
C) static discharge
D) conduction
E) none of the above
Answers
Answer:
i think a
Explanation:
Shuffling your feet across the floor as you walk is an example of charging by friction. The correct option is A.
What is friction?The force preventing sliding against one another of solid surfaces, fluid layers, and material components is known as friction.
There are various kinds of friction: Two solid surfaces in touch are opposed to one another's relative lateral motion by dry friction.
Frictional force is the force produced when two surfaces slide against and touch each other.
The surface texture and amount of force needing them together have the biggest an impact on these forces. The amount of frictional force is influenced by the object's position and angle.
As an illustration of how charge is transferred via friction, consider walking over a carpet.
Thus, the correct option is A.
For more details regarding friction, visit:
https://brainly.com/question/13000653
#SPJ5
A family is skating at an ice rink. The 58.2 kg mother is holding the
hand of her 35.5 kg daughter. The father grabs his wife's free hand and pulls horizontally with a constant force of 100. N. Assume that the skates glide without friction on the ice and that the family's hands andarms approximate ideal strings. How much net force does the daughter experience?
Answers
Answer:
When I got this question I had to draw it out so if you have to do that, draw 3 stick figures holding hands, one representing the mother, father, and daughter. Then you write their weights on top of them and then draw an arrow pointing from the father to the mother.
Explanation:
use this formula :
[tex]a_{y}[/tex] = [tex]\frac{Fdadshandy}{msys}[/tex]
then you fill it in :
[tex]a_{y}[/tex] = [tex]\frac{100N}{35.5kg+58.2kg}[/tex]
[tex]a_{y}[/tex] = [tex]\frac{100N}{93.7kg}[/tex]
[tex]a_{y}[/tex] = [tex]1.0672[/tex] [tex]m/s^{2}[/tex]
then you multiply that with the daughters weight :
[tex]T_{2} x= m_{2} a_{y}[/tex]
[tex]T_{2} x = 35.5kg (1.0672 m/s^{2})[/tex]
[tex]T_{2} x = 37.89N[/tex]
and that's the answer :) : 37.89N
An electric motor transforms potential energy into mechanical energy.
Please select the best answer from the choices provided
T
F
Answers
Answer:
t
Explanation:
Answer:
False
Explanation:
Water is stored in a reservoir at an average vertical height of 350 m above the turbines of a hydroelectric power station. During a 7.0 hour period, 1.8 × 10^6 m3 of water flows down from the reservoir to the turbines. (a) The density of water is 1000 kg / m3. For this 7.0 hour period, calculate (i) the mass of water that flows from the reservoir to the turbines, find the mass
the gravitational potential energy transformed as the water flows to the turbines, find the energy
the maximum possible average output power.
find the power
Answers
Answer:
(a) (i) 1) The mass of the water is 1.8 × 10⁹ kg
2) The gravitational potential energy is 6.174 × 10¹² J
4) The energy given to the turbine by the falling water is 6.174 × 10¹² J
5) The maximum possible average output power is 245 MW
Explanation:
In the question we are required to convert the total initial potential energy, P.E., of the water to power
The given parameters are;
The height of the reservoir above the turbine, h = 350 m
The time duration the volume of water takes to flow, t= 7.0 hours
The volume of water that flows down from the reservoir, V = 1.8 × 10⁶ m³
The density of the water, ρ = 1000 kg/m³
(a) (i) Density = Mass/Volume
∴ Mass = Density × Volume
The mass of the water that flows down from the reservoir = m = V × ρ
By substituting the known values, we have
The mass of the water, m = 1.8 × 10⁶ m³ × 1000 kg/m³ = 1.8 × 10⁹ kg
2) The gravitational potential energy, P.E. = m × g × h
where;
m = The mass of the water = 1.8 × 10⁹ kg
g = The acceleration due to gravity = 9.8 m/s²
h = The height from which the water falls = 350 m
Which gives;
The gravitational potential energy,
P.E. = 1.8 × 10⁹ kg × 9.8 m/s² × 350 m = 6.174 × 10¹² J
The gravitational potential energy = 6.174 × 10¹² J
4) The energy given to the turbine by the falling water, E = The gravitational potential energy = 6.174 × 10¹² J
5) The maximum possible average output power, P = (Energy given to the turbine, E)/(Time taken to produce the energy = The time duration the water takes to flow, t)
The time duration the water takes to flow, t = 7.0 hours = 7 × 60 × 60 seconds = 25,200 seconds
∴ P = 6.174 × 10¹² J/(25,200 s) = 245,000,000 watts = 245 MW
If an object moving at 5 m/s accelerates for 30 seconds at a rate of 2
m/s^2, what is its final velocity? *
Answers
Answer:
V=u + at
V= final velocity
U= Initial velocity
a= acceleration
t= time taken
V= 5 + 30*2
V=5+60
V=65m/s
Explanation:
plz help asap 3 problums i will give brailyest
Which would take more work: lifting a 4 N box 0.5 m or a 1 N box 4 m? Explain your answer.
Sheleah does 1500 J worth of work on a 250 N box. How far does she have to move the box?
A 400 kg box and a 200 kg are to pushed across a horizontal table, the exact same distance with the exact force. Which box will have the most work done on it? Which box will get to the end first? Explain both of your responses.
Answers
Answer:
the answer is 104568948 degress
Explanation:
yeeeeeee
What is the difference between professional and casual communication styles?
Answers
Answer:
professional communication style is expected to be formal while the casual is informal.
Explanation:
Which observation supports a model of the nature of light in which light acts as a wave?
A. Constructive interference
B. Temperature change
C. Blackbody radiation
D. Photoelectric effect
Answers
Answer:
Explanation:
Hope this helps!
Answer:
a. constructive interference
Explanation:
100% correct
Imagine that person B is more massive than person A in the picture above. 3 points
If they push off of each other with the same amount of force, who will
have the greater acceleration? What law are you applying? Explain how
that law is being applied."
Answers
Answer:bight
Explanation:
Which vector below goes from (0,0) to (-2,4)?
A. c
B. a
C. b
D. d
Answers
Answer:
I believe it is A.c
Explanation:
hope its right
Answer:
the correct answer is A with a line on top
Explanation:
I just did the quiz
The energy of a given wave in the electromagnetic spectrum is 2.64 × 10-21 joules, and the value of Planck’s constant is 6.6 × 10-34 joule·seconds. What is the value of the frequency of the wave?
Answers
Answer:
4.00 × 1012 hertz
Explanation:
B. Which of these uses the most power? Explain your answer.
1) 160 J of work in 8 seconds
2) 80 J of work is 4 seconds
3) 180 J of work in 9 seconds
Answers
Answer:
p=w/t
160/8=20
80/4=20
180/9=20
...so..all these uses equal power
Solve for v
when
d = 10 and
t=5
Answers
Answer:
asfsdfasasfsda
Explanation:
Answer:
IDEK HOW TO SOLVE
Explanation:
An object decelerates from 25.0 m / s to 5.0 m / s in a time of 4.0 s. It has a mass of 50 kg. What is the resultant force on the object?
Answers
Answer:
10 N
Explanation:
Force = Mass÷Acceleration
F= 50 ÷ 5
= 10 N
______________________
Acceleration =
[tex] \frac{5 - 25}{4 } [/tex]
= 5m/s2
Given:
Mass, m = 50 kgAcceleration, a = 5.0 m/sTime, t = 4.0 sAs we know,
The acceleration will be:
= [tex]\frac{5-25}{4}[/tex]
= [tex]5 \ m/s^2[/tex]
hence,
The force will be:
→ [tex]F = \frac{m}{a}[/tex]
By substituting the values, we get
[tex]= \frac{50}{5}[/tex]
[tex]= 10 \ N[/tex]
Thus the above response is right.
Learn more about force here:
https://brainly.com/question/5438426
Which lighting source has lower energy costs and a longer life but can be dangerous?
a. fluorescent
b. laser
c. incandescent
d. neon
Answers
Answer: I'm like 98% sure it's fluorescent cause it's got mercury
Explanation:
How do I find the change in velocity of a hockey puck?
Mass=0.1697 kg btw
Answers
Answer:The foot exerts a force on the ball during a well-defined
duration t (time extent of the contact)
Explanation:
Plants appear green because they do not absorb the green wavelengths of light. What happens to those green light waves when they hit a plant? The are diffracted. They are absorbed. They are reflected. They are refracted.
Answers
Answer:
They are reflected.
Explanation:
Red light is absorbed while green light is reflected, causing the color to be green in human eyes.
Answer:
C
Explanation:
A student wants to get real and inverted
image of same size as object. Which type of
mirror should be used and draw ray diagram
for this.
Answers
Answer:
concave mirror
Explanation:
TRUE OR FALSE Light can travel through materials that you cannot see through, like wood or aluminum foil.
Answers
Answer: TRUE
Explanation:
(Example): If there was lightening outside, the lightening (light) could travel through a tree (that you cannot see through).
The statement Light can travel through materials that you cannot see through, like wood or aluminum foil, is True.
What is light?Electromagnetic radiation that the human eye can detect as light. The wavelengths of electromagnetic radiation cover a very broad spectrum. Information about space and time is transmitted by light. This characteristic serves as the foundation for the study of optics, optical communications, and a wide range of other related, both established and developing technologies.
Lasers, holography, and fiber-optic communication systems are examples of technologies that use light manipulation. The electromagnetic spectrum, which includes all forms of light, propagates in a vacuum at the same speeds, c. only a small portion of which is visible to humans. And it is unquestionably possible for non-visible light to pass through wood, including radio waves, x-rays, and gamma-energy photons.
Therefore, the statement Light can travel through materials that you cannot see through, like wood or aluminum foil, is True.
To know more about light:
https://brainly.com/question/15200315
#SPJ2
What is the speed of an object that travels 80 meters in 2 seconds?
a
160 m/2
b
0.04 m/s
c
40 m/s
Answers
Answer:
an object traveling 80 meters in 2 sec. is 160
why do prescribed drugs need to be prescribed by doctors what can happen if you abuse these drugs without a pressure?
Answers
Answer:
unperscriebed drugs can e harmful to your body
Explanation:
Increase or decrease? 35 points ??? Please help
Answers
Answer:
increase, GPE, KE, KE, KE, PE, PE, KE, KE,
Explanation:
2. A tower is 15.24 m high. At a certain distance away from the tower, an observer
determines that the angle of elevation to the top of it is 41°. How far is the observer
from the base of the tower?
Answers
Explanation:
Opposite side from the 41° angle = 15.24m
We wish to find the adjacent side (horizontal length)
Therefore 15.24m / tan41° = 17.53m.
True or False: Solar energy drives winds around the globe as warm water and land heat the air.
Answers
Answer:
False
Explanation:
Susan makes the following entry in her notebook: “On Friday we were given a blue liquid in a shallow container. We placed it on the windowsill over the weekend. On Monday morning, there was no liquid left, but the dish had some solid blue stuff in it.”
a. Was the blue liquid in the dish a heterogenous mixture, a solution, or a pure substance? Explain your choice.
b. Write a few sentences about what you think happened in the dish.
Answers
Answer:
Explanation:
a. From the information provided in the question, the blue liquid is a solution. This is because a solution is a type of homogeneous mixture (that has an evenly distributed solute in a solvent) which is the reason the liquid was said to be blue (and not immiscible blue solid in a liquid) but after been exposed to heat became just a blue solid. Typically, a solution has a solute and a solvent (combined), the solute here is the blue solid while the solvent is the liquid that made the combination a liquid.
b. Since the dish containing the liquid was placed on a windowsill, it can be assumed that the dish was subjected to heat from the sun which caused the liquid (in the solution) to evaporate after exposure to the heat from the sun (over the weekend) leaving the blue solid solute (of the solution) to remain in the dish. This can be referred to as evaporation to dryness in separation techniques (if the goal was to intentionally separate the solid solute from the liquid solvent).
In your own words explain how acceleration differs from uniform motion.
Answers
Explanation:
acceleration is the Changing of throut per unit time ....
and in uniform motion .....
in that the speed of an object is uniform means same
