What amount of moles does 60.5 L of carbon dioxide occupy at 50.5 kPa and 20 degrees C?

Answers

Answer 1

n = PV=RT

where

n = number of mole

p = pressure = 2.15 ATM

v = volume = 60.5L

r = 0.0821 atm (L)/ mol(K)

t = temperature = 25°+273.15=298.15 kelvin

Replacing with the values given

n = 2.15(60.5)/0.0821(298.15)=5.3 mole.


Related Questions

As molecules move in a current of air or water, heat is transferred by ____________.

Answers

Answer:

It is called Convection. Hope this helps!!!

You must apply a force to put an object in motion or ________an object from moving.

(answer the blank)

Answers

Answer:

any push or pull that causes an object to move, stop, or change speed or direction

Description:

zayn your my enemy

what is osmosis and it's functions ​

Answers

Answer:

Osmosis is a passing of material and especially water through a membrane (as of a living cell) that will not allow all kinds of molecules to pass. Osmosis allows water to pass through cell membranes. The transfer of water from a dilute solution to a concentrated solution over a partly permeable membrane is defined as osmosis.

Explanation:

I hope this helps :)

Determine what’s wrong with these electronic configurations

Answers

Answer:

Explanation:

19) it is 3d10 instead of 4d10

20) it is missing 3p6, and 4s2 before 3d5

21) Ra is not a noble gas

22) Cs is not a noble gas

What are bubbles (fizzes) in a soda can be described as??
Liquid to Gas or Gas to Liquid

Answers

Answer:

Liquid to Gas

Explanation:

The drink in the soda is a liquid and when you open the can, the CO2 leaves the container.

Hope this helped! :)

liquid to gas
have a good day!

Use the periodic table to determine the molar mass of silver oxide (Ag20).
Type the correct answer in the box. Use numerals, and express your answer to the correct number of significant figures

(blank) g/mol

Answers

The molar mass of the compound (i.e silver oxide) Ag₂O obtained from the periodic table is 232 g/mol

What is the molar mass of a compound?

The molar mass a compound is simply defined as the sum of the molar masses of the individual elements found in the compound.

How to determine the molar mass of the compound Formula = Ag₂OMolar mass of Ag = 108 g/mol Molar mass of O = 16 g/mol Molar mass of Ag₂O =?

Molar mass of Ag₂O = (2×108) + 16

Molar mass of Ag₂O = 216 + 16

Molar mass of Ag₂O = 232 g/mol

Learn more about molar mass:

https://brainly.com/question/25879634

Answer: 231.753 g/mol

Explanation:

got it right on Exact Path

(VIEW PHOTO) Identify the parts of the equation by dragging each label below to the correct arrow on the diagram. Drag the items on the left to the correct location on the right.

Answers

Ok so identify the parts of the equation by dragging each label to the correct arrow on the diagram

The location are Solid, reactants, aqueous, liquid, gas.

A strong has a precise form and volume. A liquid has a particular quantity, but takes the shape of its field. A gasoline lacks either a defined form or quantity. Plasma is similar to a gasoline in that its particles are very some distance aside, but a gasoline is electrically neutral and plasma has a rate.

What's chemical response?

A chemical reaction occurs while one or greater chemical substances are modified into one or greater other chemical compounds. Examples: iron and oxygen combining to make rust. vinegar and baking soda combining to make sodium acetate, carbon dioxide and water.

What's strong ?

A strong is a state of be counted that keeps its form and density when now not constrained.

What are 3 forms of gases?

Elemental gasses. those are the factors that exist as gasses at trendy temperature and stress.pure and mixed gases. pure gases can be made of person atoms consisting of inert gases or may be constructed from a group of various atoms which include carbon dioxide. poisonous gases.

Learn more about chemical compounds here: https://brainly.com/question/26487468

#SPJ2

Why does one boil the charcoal-unknown-water mixture as opposed.

Answers

In a charcoal-water-unknown mixture, this must be boiled in opposition because the coal is insoluble, and with the heated mixture the coal can be removed.

What is the recrystallization process?

It is used in the chemical sciences as a technique used to purify chemicals by heating materials to temperatures above the crystallization of each compound.

Therefore, when a component is heated, the impurities are dissolved and can be removed from the solution, generating the purification of the compound.

Find out more about recrystallization here:

https://brainly.com/question/10194206



A. 63 kg ball is moving at 4. 3m/s. What is the momentum of the ball?

Answers

the answer comes out to be 270.9 kg * m/s

Fill in the blank :


______ ________ are the electrons of an atom that participate in chemical reactions. These electrons determine the basis for the periodic properties of an element.

Answers

Answer:

The number of electrons in the outermost shell of a particular atom determines its reactivity, or tendency to form chemical bonds with other atoms. This outermost shell is known as the valence shell, and the electrons found in it are called valence electrons

Explanation:

please mark me brainliest

help this mirrorball, please​

Answers

Answer:

Option B

Explanation:

Avagadro's hypothesis showed that at constant temperature and pressure equal volume of all gases contains equal no of molecules.

Avagadro's constant is known as 6.022×10^23

Which of the following represents Avogadro's hypothesis?

Equal volumes of all gases under same conditions of temperature and pressure contain equal number of molecules

Avogadro's hypothesis is an experimental gas law that relates to the volume of gas to the amount of gas present. Its formula is :

[tex] \sf \frac{V_1}{ n_{1} } = \frac{V_2}{ n_{2} } [/tex]

Where,

V1 is first volumeV2 is second volumen1 is first amount of gas (in moles)n2 is second amount of gas (in moles)

HELP ME PLEASE 100 POINTS!!!!!!!!!
Record the weight showing on the scales by clicking on the Report button below.
How many foot-pounds of work were done?
Force (weight from scale reading in above question) times the distance (1 foot) = work done.
Type your foot-pounds answer in your Report document.
2. Place the box on a smooth surface.
Pull the box 1 foot across a smooth desk or table.
Record the weight showing on the scales.
A. How many foot-pounds of work were done?

(Force [weight from scale reading] times the distance [1 foot] = work done.)
Type your foot-pounds answer in your Report document.
B. What is the difference between the amount of foot-pounds required to lift the box and to pull the box?
Record this difference.
C. Why is there a difference between lifting an object and pulling it across a surface?
Clue: What force are you working against when you lift the object?
3. Find another object to lift and pull with the spring scale. Write the difference in foot-pounds between lifting and pulling.
a. lifting
b. pulling
c. difference
d. Write your conclusions from both experiments in your own words.

Answers

Answer:

the answer is c

Explanation:

i took the test

what is the most common element found in the universe?

Answers

Answer:

Carbon, my good sir hope it helps!

Explanation:

is the tendency of an object to resist a change in its state of motion.

Answers

Answer:

Inertia is the tendency of an object to resist changes in its state of motion.

Explanation:

hope this helps

How many atoms are in 15.1g of potassium?

Answers

Answer:

2.32 x10^23 atoms

Explanation:

15.1/39.10 x (6.02 x10^23)

= 2.32 x10^23 atoms

First, you divide 15.1 g of potassium by its molar mass. (Molar mass of potassium is 39.10 g). Then you multiply using Avogadro's number (6.02 x10^23) to get your answer.

Give the characteristic of a first order reaction having only one reactant.

Answers

Answer:

As the first order reaction depends on (a uni-molecular reaction) the concentration of only one reactant.

And the rate law of the reaction of first order with a reactant A is:

rate = K[A]^-1

when K is the rate constant.

Suppose a particular star is projected from a firework at a starting height of 520 feet with an initial upward velocity of 72ft/sec. The equation h= -16t^2+72t+520 gives the star's height in feet at time t in seconds

Answers

By finding the vertex of the parabola, we will see that the firework reaches the maximum height in 2.25 seconds.

How long will take to reach the maximum height of the path?

The height of the firework is given by:

h = -16*t^2 + 72*t + 520

This is a quadratic equation, the maximum will be at the vertex.

Remember that for a quadratic equation:

y = a*x^2 + b*x + c

The x-value of the vertex is:

x = -b/2a.

Then for our equation:

h = -16*t^2 + 72*t + 520

The vertex will be at:

t = -72/(2*-16) = 2.25s

This means that the firework will reach the maximum height in 2.25 seconds.

If you want to learn more about quadratic functions, you can read:

https://brainly.com/question/1214333

A sample of oxygen that occupies 1.00 * 10^6 at 575 mm Hg is subjected to a pressure of 1.25 atm. What will the final volume of the sample be if the temperature is held constant?

Answers

A sample of oxygen occupies 1.00 × 10⁶ mL at 575 mmHg. If the pressure is increased to 1.25 atm, the volume decreases to 6.06 × 10⁵ mL.

What does Boyle's law state?

Boyle's law states that the pressure of a given mass of an ideal gas is inversely proportional to its volume at a constant temperature.

Step 1: Convert the initial pressure to atm.

We will use the conversion factor 1 atm = 760 mmHg.

575 mmHg × 1 atm/760 mmHg = 0.757 atm

Step 2: Calculate the final volume of the gas

A sample of oxygen occupies 1.00 × 10⁶ mL (V₁) at 0.757 atm (P₁).

If the pressure is increased to 1.25 atm (P₂), we can calculate the new volume (V₂) using Boyle's law.

P₁ × V₁ = P₂ × V₂

V₂ = P₁ × V₁ / P₂

V₂ = 0.757 atm × 1.00 × 10⁶ mL / 1.25 atm = 6.06 × 10⁵ mL

A sample of oxygen occupies 1.00 × 10⁶ mL at 575 mmHg. If the pressure is increased to 1.25 atm, the volume decreases to 6.06 × 10⁵ mL.

Learn more about Boyle's law here: https://brainly.com/question/469270

Philip finds this information while doing research about margarine, which is a synthetic food product.

Hydrogenation is a process through which vegetable oil is changed from a liquid into a solid. During hydrogenation, a chemical reaction occurs. Hydrogen is added under pressure to the vegetable oil, resulting in a synthetic form of fat called trans fat. Trans fats typically taste better and can be stored longer than natural vegetable oils. A food product that results from hydrogenation is margarine. The Mayo Clinic website explains that margarines that contain trans fats increase the risk of heart disease and increased levels of cholesterol in the blood. Trans fats also reduce the amount of “good” cholesterol in the blood. Trans fats occur naturally in meat and dairy products. A 2009 report in Advances in Nutrition suggests that trans fats from animal products, such as dairy, beef, and lamb, may have beneficial health effects, including reducing the chance of developing heart disease or cancer. Which conclusion is best supported by the information that Philip gathered?

0 A) Trans fats have little effect on your health.

O B) Experts recommend avoiding trans fats altogether.

O C) Research shows conflicting evidence of the effect of trans fats on human health.

O D) Trans fats produced by hydrogenation have the same overall effect on human health as naturally occur- ring trans fats. ​

Answers

Answer:

Research shows conflicting evidence of the effect of trans fats on human health.

what is the trophic level of common Prawn? primary,secondary,or tertiary consumer?

Answers

Answer:

secondary consumer

Explanation:

The salt water food web begins with producers (plants, algae, phytoplankton) that create food from sunlight, and continues with primary consumers (zooplankton) that eat the producers, followed by secondary consumers (shrimp, crustaceans, small fish) that eat the primary consumers, then tertiary consumers

What kind of metal are spoons typically made out of?.

Answers

Answer:

Spoons are usually made out of steel

Answer:

Aluminum and steel

Explanation:

If 17. 6 g of hcl are used to produce a 14. 5 l solution, what is the ph of the solution?.

Answers

This problem is providing us with the mass of hydrochloric acid and the volume of solution and asks for the pH of the resulting solution, which turns out to be 1.477.

pH calculations

In chemistry, one can calculate the pH of a solution by firstly obtaining its molarity as the division of the moles of solute by the liters of solution, so in this case for HCl we have:

[tex]M=\frac{17.6g*\frac{1mol}{36.46g} }{14.5L} \\\\M=0.0333 M[/tex]

Next, due to the fact that hydrochloric acid is a strong acid, we realize its concentration is nearly the same to the released hydrogen ions to the solution upon ionization. Thereby, the resulting pH is:

[tex]pH=-log(0.0333)\\\\pH=1.477[/tex]

Which conserves as much decimals as significant figures in the molarity.

Learn more about pH calculations: brainly.com/question/1195974

What do you notice about the Total
height lost in each set of trials?

Answers

Answer: In each set of trails, the total height lost was the same.

Explanation:

14. When weathering breaks down rocks with water, wears things away with wind, and scorches or freezes the earth
with temperature, it is called
weathering
15. In chemical weathering chemicals in the air mix with water to make
that eats
away at limestone rock Oxygen reacts with iron and forms
16. Erosion is the flow of water that moves rocks and sand, the push of the wind that carries sediments away and
even the movement of a
dropping pieces of rock at the bottoms of oceans and lakes.
Go onto brainpop.com and find the tutorial called Weathering. Login with sawgrassmid and poplearn.
and eventually
17. Weathering is the process that breaks down rocks into
18.
formation depends on sediments from weathering and those same bits make up sedimentary
rocks.

Answers

Answer:

14. Mechanical Weathering

15. & 16. I'm not sure

17. Smaller Pieces, Minerals I think

18. I can't remember

Explanation:

I'm not 100% sure about these but I hope they help. Sorry I couldn't do any more.

What ions are formed when naoh is dissolved in water?.

Answers

Answer:

When sodium hydroxide (NaOH) dissolves in water, it separates into positively - charged sodium ions (cations) and negatively - charged hydroxide ions (anions).

Explanation:

Select the correct answer.
A certain reaction has this form: aA bB.

At a particular temperature and [A]0 = 2.00 x 10-2 Molar, concentration versus time data were collected for this reaction and a plot of ln[A]t versus time resulted in a straight line with a slope value of -2.97 x 10-2 min-1.

How much time is required for the concentration of A to decrease to 2.50 x 10-3 Molar?
A.
70.03 minutes
B.
0.0096 minutes
C.
0.589 minutes
D.
29.70 minutes
E.
100 minutes

Answers

Answer:

uhm I think it would be letter C. 0.589

A population of deer live in a forest ecosystem. Which of these describes a density-independent factor that could affect this population?

A. An invasive species causes increased competition for space.

B. A new predator is introduced into the ecosystem.

C. A wildfire occurs in the ecosystem.

D. The deer population's food supply decreases.

Answers

D.the deer populations food supply decreases

Answer:C. A wildfire occurs in the ecosystem.

Explanation: I just got it right

A gas at 7.75 x 104 Pa and 17°C occupies a volume of 850. cmº. At what temperature, in degrees Celsius, would the gas occupy 720. cm3 at 8.10 x 104 Pa?

Answers

[tex]\tt \dfrac{P_1V_1}{T_1}=\dfrac{P_2V_2}{T_2}[/tex]

T₁=17+273=290 K

7.75x10⁴.850/290 = 8.10x10⁴.720/T₂

T₂=256.74 K = -16.26°C

The final temperature can be measured using combined gas law. The final temperature of the gas with the volume of 8 L and 1 atm pressure is  260 °C.

What is combined gas law :

Combined gas law states the relation between volume, temperature and pressure of a gas as written below:

PV/T = constant.

This law is the combination of  Boyle's law, Charle's law and Gay-Lussac's law.

Given the initial quantities:

P1 =  7.75 × 10⁴

V1 = 850 cm³

T1 = 17 °C

Final quantities:

P2 = 8.10 × 10⁴

V2 = 720 cm³

Then, P1 V1/T1 = P2 V2/ T2

The final temperature T2 = P2 V2 T1/P1 V1

T2 =  ( 8.10 × 10⁴×720 cm³× 17°C)/ (  7.75 × 10⁴ ×  850 cm³ L) =  15°C

Therefore, the final temperature is 15°C.

Find more on combined gas law;

http://brainly.com/question/13154969

#SPJ2

This question is about the extraction of metals.
Element R is extracted from its oxide by reduction with hydrogen.
The equation for the reaction is:
3H2 + RO3 R + 3H20
03
1
The sum of the relative formula masses (M) of the reactants (3H2 + RO3) is 150
Calculate the relative atomic mass (A) of R.
Relative atomic masses (A): H = 1 O= 16
I
I
[2 marks]
Relative atomic mass (A) of R =

Answers

The relative atomic mass of the element R is 96.

What is the relatives atomic mass of an element?

The relative atomic mass of an element is the number of times the mass of one mole of that element is heavier than 1/12 the mass of one atom of carbon-12.

The relative atomic mass of an element can also be obtained from the fomula mass of the compound the element occurs in

The sum of the relative formula masses (M) of the reactants (3H2 + RO3) = 150

3 × 2 × 1 + R + 16 × 3 = 150

R = 150 - 54

R = 96

Therefore, the relative atomic mass of R is 96.

Learn more about relative atomic mass at: https://brainly.com/question/3187640

#SPJ6

Which compound can inadvertently be created through the distillation process and can be fatal if consumed

Answers

Answer:

lWhich compound can inadvertently be created through the distillation process and can be fatal if consumed?

Methanol

Other Questions
1211. Quadrilateral ABCD with vertices A(4,0),B(6, 2), C(8, -7), and D(0, -5): 270A (B' (C (D'( For each question, determine the type of reaction, then balance the reaction.Problems 1-4: 2 points each1.Al +H, Te Al, Tez +Ha. Type:2._C12H26 +O2 H2O +CO2a. Type:3.Au +CuSO4 Cu +AuSO4a. Type:4.HO H2 +a. Type: A rectangular prism has a volume of 1280 cubic units. The length is 32 units and the width is 5 units.What is the height of the prism?Enter your answer in the box.units If A=1/2bxh, find A when b=4.5 and h=5.2 A fish tank in the shape of a right rectangular prism is 3614 inches long, 1814 inches tall, and 1234 inches wide. What is the maximum amount of water the fish tank can hold? What does washington suggest Americans should be ""indignantly frowning upon""? What decides the number of electoral votes a state has in the electoral college?. The sum of 2 numbers is 32. Their difference is 30. What are the 2 numbers? Show all work Which of the following could be the equation of a line parallel to the line y =-2/3x-1 What is the difference between 'army' and 'military'?. Please Help This One I just can't think. The probability of spinning a 3 and flipping heads is The picture is of a man and a giraffe.Painting of a Chinese man holding a giraffe with a rope. There is Chinese script on the left side.What achievement by the Ming dynasty does this picture represent?The giraffe towering over the man represented the emperors authoritarian rule.The man leading the giraffe represents the emperor leading the huge territory of China.The giraffe, brought back from Africa, represents the emperors trade with the outside world.The man pulling on the leash represents the emperors demand that foreigners kowtow to h Which is a factor of x2 8x 48? (x 6) (x 4) (x 16) (x 12). The value of the exponential function g(x) is 340 when x=2 and decreases by 15% for every two-unit increase of x. Which graph represents g(x)? If I asked a girl to prom and after the first week (I asked her in person) she doesn't respond I send her a text asking her if she has an answer for me and she never texted back and it has now been two weeks and she won't even talk to me. What should I do? I will give brainliest to anybody who gives me a good answer with good advice What would the height need to be for this curve to be adensity curve?O 1/5O 1/4O 1/2O 1 A player chooses one card from Deck A and one card from Deck B. What is the probability that the player will choose a C2 card from the first deck or a C6 card from the second deck?The probability of choosing a C3 card from Deck A or choosing a C5 card from Deck B is (Use a simplified fraction to represent the probability). [tex] \frac{7}{8} \times \frac{2}{4} = [/tex]what is the answer Sarah scored 82 points on her first test of the year. On the second test,she scored 77 points. What is the percent of change?