Which of the following is NOT a heterogenous mixture:
Salad
Beef Stew
Cereal in milk
Vinegar

Answer:

Electronegativity is probably the biggest thing that plays into reactivity. Therefore, since fluorine has a higher electronegativity than chlorine, fluorine is more reactive.

Explanation:

I got it right

Answer:

V = 93.0 L

Explanation:

Hello!

In this case, when computing the PVT properties for an ideal gas, we need to use the following equation:

[tex]PV=nRT[/tex]

In such a way, for 2.5 x 10²⁴ molecules of chlorine at STP (273.15 K and 1.00 atm) we first need the moles based on the Avogadro's number:

[tex]n = 2.5x10^{24}molec*\frac{1mol}{6.022x10^{23}molec} = 4.15mol[/tex]

Now, we solve for volume on the ideal gas equation to obtain:

[tex]V=\frac{nRT}{P}[/tex]

So we plug in and get:

[tex]V=\frac{4.15mol**0.08206\frac{atm*L}{mol*K}*273.15K}{1.00atm}\\\\V=93.0L[/tex]

Best regards!

The question is incomplete, the complete question is;

In Sample Exercise 10.16, we found that one mole of Cl2 confined to 22.41 L at 0 °C deviated slightly from ideal behavior. Calculate the pressure exerted by 1.00 mol Cl2 confined to a smaller volume, 5.00 L, at 25 °C. (a) First use the ideal-gas equation and (b) then use the van der Waals equation for your calculation. (Values for the van der Waals constants are given in Table 10.3.) (c) Why is the difference between the result for an ideal gas and that calculated using the van der Waals equation greater when the gas is confined to 5.00 L compared to 22.4 L?

Answer:

See explanation

Explanation:

Since we have

For 5.00 L using Ideal gas law;

PV= nRT

P = nRT/V

P = 1 * 0.082 * 298 K/5.00

P= 4.887 atm

Using Van der walls equation;

[P + an^2/v^2] *  [V - nb] = nRT

P = (nRT/ [V - nb]) - (an^2/v^2)

P= 1 * 0.082 * 298/5 - (1 * 0.0562) - (6.49(1^2)/5^2)

P = (24.436/4.9438) - 0.2596

P= 4.683 atm

For 22.4 L

P = nRT/V

P = 1 * 0.082 * 298 K/22.4

P= 1.0909 atm

Using Van der Walls equation;

[P + an^2/v^2] *  [V - nb] = nRT

P = (nRT/ [V - nb]) - (an^2/v^2)

P= 1 * 0.082 * 298/22.4 - (1 * 0.0562) - (6.49(1^2)/22.4^2)

P= (24.436/ 22.3438) - 0.0129

P= 1.081 atm

According to Boyle's law, pressure is inversely proportional to volume. Increase in volume leads to decrease in pressure. Therefore the pressure calculated both by the ideal gas equation and Van der Waals equation at 5.00 L is greater than that calculated using both methods at 22.4 L

Answer:

dose it give you numbers

Explanation:

Stomata is present on the lower epidermal layer that helps gases to move through. The tissue between the upper and lower epidermis of leaves, called the mesophyll, is perfectly designed to carry out intensive photosynthesis.

Since this evolutionary development is so crucial to plant identity, almost all terrestrial plants use the same pores, known as stomata, to absorb carbon dioxide and release oxygen.

Stomata are microscopic openings that are crucial for photosynthesis. They swarm and are plentiful on the plants' surface.

The reason for this high concentration is that they have a lot of chloroplasts, which are the locations for photosynthesis.

Chloroplasts provide oxygen and create energy through photosynthesis to assist plant growth and crop output.

Thus, the mesophyll cells of the leaf contain many of chloroplasts. The tissue between the upper and lower epidermis of leaves, called the mesophyll, is perfectly designed to carry out intensive photosynthesis.

For more details regarding stomata, visit:

https://brainly.com/question/14351755

#SPJ5

Answer:

A. p → ~q

Explanation:

I am double checking.

Answer:

the would test random expirements

Answer:

B, C

Explanation:

Answer:

the tilt of Earth’s axis

the directness of the Sun’s rays

Explanation:

got it right on edge on 12-13-22

Answer:

a chemical change

Explanation:

lighting a match is a chemical change. chemical reactions cause chemical change. in a chemical reaction two or more substances, called the reactants, form different substances called products. hope this helped :)

The question is incomplete, the complete question is;

The compound magnesium nitrate is a strong electrolyte. Write the reaction when magnesium nitrate is put into water:

Answer:

Mg(NO3)2(s)--------->Mg^2+(aq) + 2NO3^-(aq)

Explanation:

When we say that a compound is a strong electrolyte, we mean that that the compound dissociates completely in solution to form its ions.

This means that all strong electrolytes attain 100% dissociation of the solid in water according to its stoichiometric equation.

For magnesium nitrate, the reaction equation is;

Mg(NO3)2(s)--------->Mg^2+(aq) + 2NO3^-(aq)

Answer:

The protons and electrons in each element are equal. The sulfur has 16 electrons and 16 protons. But the ionic atom's electron quantity changes depending on how many it has gained. 'S2-' has gained 2 electrons, which means it has now 18 electrons and 16 protons. 16 neutrons

Explanation:

Answer:

No

Why?

Explanation:

A pure sample of an unknown molecule has a mass of 0.03551 kg and contains 0.2000 moles.

What is the molecular weight of the substance?

Answer:

177.6 g/mol

Explanation:

Trust me

Answer:

C Group 11

Explanation:

Group 11, by modern IUPAC numbering, is a group of chemical elements in the periodic table, consisting of copper (Cu), silver (Ag), and gold (Au).

These elements show highest electrical conductivity.

Answer:

C Group 11

Explanation:

Group 11, by modern IUPAC numbering, is a group of chemical elements in the periodic table, consisting of copper (Cu), silver (Ag), and gold (Au).

These elements show highest electrical conductivity.

Explanation:

it might look like it has disappeared, but in fact it has just mixed with the water to make a transparent

Answer:

hope this help

Explanation:

change: volume of solid , volume of liquid , the volume of gases

not change: the shape of solid , the shape of liquid , the shape of gases

Neon is the tenth element with a total of 10 electrons. So, the correct atom is neon.

Answer:

In order from fastest to slowest, Steam > Liquid Water > Ice

Explanation:

As temperatures rise, particles are allowed to move faster and more freely. If you think about the phases of matter, the more compact something is (solids), the less the particles are able to move. Taking the temperate of ice into consideration, the cold further restricts fast movement of particles, whereas gas (especially steam in this case), in hot temperatures, is able to move quickly and freely in the atmosphere.

Answer:

D

Explanation:

To solve this we must be knowing each and every concept related to force. Therefore, the  objects motion will be towards downward with a force of 5 N.

A force is an outside entity that has the power to alter a body's state of rest or motion. It has a direction and a magnitude. The point where forces are applied is determined by the the force's direction as well as the application of the force.

Newton and dyne units are used to measure the force exerted on an item. When using the centimeter kilogram second system of units, force is measured in dynes (CGS unit). In the common international system of units, it is denoted by the letter Newton (N) (SI unit).

upward force=5 N

downward force= 10 N

total force acting on body=downward force-upward force

                                          = 10 N - 5 N

                                          =5 N downward force

The  objects motion will be towards downward with a force of 5 N.

Therefore, the  objects motion will be towards downward with a force of 5 N.

To learn more about force, here:

https://brainly.com/question/13014979

#SPJ5

Answer: D an organism

Explanation:

Answer:

[tex]4.86\times10^{-7}\ \text{m}[/tex]

Explanation:

R = Rydberg constant = [tex]1.09677583\times 10^7\ \text{m}^{-1}[/tex]

[tex]n_1[/tex] = Principal quantum number of an energy level = 2

[tex]n_2[/tex] = Principal quantum number of an energy level for the atomic electron transition = 4

Wavelength is given by the Rydberg formula

[tex]\lambda^{-1}=R\left(\dfrac{1}{n_1^2}-\dfrac{1}{n_2^2}\right)\\\Rightarrow \lambda^{-1}=1.09677583\times 10^7\left(\dfrac{1}{2^2}-\dfrac{1}{4^2}\right)\\\Rightarrow \lambda=\left(1.09677583\times 10^7\left(\dfrac{1}{2^2}-\dfrac{1}{4^2}\right)\right)^{-1}\\\Rightarrow \lambda=4.86\times10^{-7}\ \text{m}[/tex]

The wavelength of the light emitted is [tex]4.86\times10^{-7}\ \text{m}[/tex].

Answer:

I THINK it is A

Explanation:

Answer: it is the eardrum caus ei used it on my test and as well got it right

Explanation: because it just is

[tex]hut7utpojghuire\\kjionbenhrmhbnhknokgn\\bihkjihjgnhrk\\\\gnthnrt\\hgnth\\\alpha thtrnhjn4t also this is for fun to me[/tex]

Answer:

36 electrons

Explanation:

The # of protons is always equal to the atomic number. In the case of Sr (Strontium), it is 38 protons.

The 2+ at the end means that it has a charge of +2, meaning that it LOST two electrons to become a cation with a full valence shell. So, 38 - 2 = 36 electrons

Answer:

38 protons 36 electrons 30 neutron because of 29 isotope

Answer:

wouldnt they still have the same density?

Explanation:

for example, the density of iron is 7.874 g/cm^3 no matter how big the piece is. I hope this helps.

Answer:Ion-dipole

Explanation:

Answer:

Explanation:

From the combustion of carbon, the reactions occurring in limited oxygen conditions are:

[tex]C(graphite) + \dfrac{1}{2}O_{2(g)} \to CO_{(g)}[/tex]  

[tex]C(graphite) + O_{2(g)} \to CO_{2(g)}[/tex]  

If it occurs in excess, then any leftover CO changes to CO2. i.e.

[tex]C(graphite) + O_{2(g)} \to CO_{2(g)}[/tex]   ---- (1)

[tex]CO_{(g)} + \dfrac{1}{2}O_{(g)} \to CO_{2(g)}[/tex]          ----- (2)

From (1), the enthalpy change is:

[tex]\Delta H_{rxn1} = \Delta H^0_{fCO_2(g)} - ( \Delta H^0_{f C(graphite)}+ \Delta H^0_{fCO_2(g)}[/tex]

[tex]\Delta H_{rxn1} =-393.5 \ kJ/mol -(0+0)[/tex]

[tex]\Delta H_{rxn1} =-393.5 \ kJ/mol[/tex]

From (2), the enthalpy change is:

[tex]\Delta_{rxn2} = \Delta H^0_{fCO_2(g)} - ( \Delta H^0_{fCO(g)} + \dfrac{1}{2} \Delta H^0_{fO_2(g)})[/tex]

[tex]\Delta_{rxn2} = -393.5 \ kJ/mol -(-110.5 + \dfrac{1}{2}(0))[/tex]

[tex]\Delta_{rxn2} = -283.0 \ kJ/mol[/tex]

Subtracting (2) from (1), we get:

[tex]C(graphite) + O_{2(g)} \to CO_{2(g)} \ \ \ \Delta H_{rxn} = -393.5 \ kJ/mol}[/tex]

[tex]CO_{(g)} + \dfrac{1}{2} O_2(g) \to CO_{2(g)}} \ \ \ \Delta H _{rxn2} = -283.0 \ kJ/mol[/tex]

[tex]C(graphite) + O_{2(g)} \to CO (g) + \dfrac{1}{2}O_{2(g)} \ \ \ \Delta H_{rxn} = -110.5 \ kJ/mol[/tex]

[tex]C(graphite) + \dfrac{1}{2} O_{2(g)} \to CO (g) \ \ \ \Delta H_{rxn} = -110.5 \ kJ/mol[/tex]

The enthalpy change ΔH of the reaction = -110.5 kJ/mol

Answer:

0.2g

Explanation:

mass=mole/molar mass

molar mass of oxygen is 32

6.06/32=0.19 or 0.2 units=grams

Answer: 1.695x10^24 atoms

Explanation: 0.938 moles CO2 = 0.938xavogadro number molecules CO2, so number of atoms = 3x0.938x6.02214076x10^23 = 1.695x10^24

Answer:

1413.386

Explanation:

The  molarity of the HNO₃ solution : 0.212 M

Given

62.4 mL HNO₃

56.25 mL of a 0.235 M  KOH

Required

Molarity HNO₃

Solution

Titration formula

M₁V₁n₁=M₂V₂n₂

1= HNO₃, 2 = KOH

n = acid base valence (amount of H⁺/OH⁻ released,for HNO₃ and KOH = 1)

Input the value :

M₁ x 62.4 x 1 = 0.235 x 56.25 x 1

[tex]\tt M_1=\dfrac{0.235\times 56.25\times 1}{62.4\times 1}\\\\M_1=0.212[/tex]

Answer:

0.212

Explanation: