Which term describes the quantity of energy transferred from a warmer object to a cooler object?
A. Convection
B. Heat
C. Kinetics
D. Voltage

Which Term Describes The Quantity Of Energy Transferred From A Warmer Object To A Cooler Object?A. ConvectionB.

Answers

Answer 1

Answer: B

Explanation:


Related Questions

What do u know about how the earths land is formed hint it’s made of rocks

Answers

Answer:

it's made of land, rocks, water and many more

Explanation:

if you think about it, mountains are just giant rocks. and the ocean is water and land is... well land

Answer:

Well all Ik is that when the earth was formed it was a big hot rock then the water came in and settled it and the animals kinda became land creatures the yea

Explanation:

describe the importance of measurements in brief.​

Answers

Answer:

importance of measurement is it gives proper required amount of anything if it will not exist then alot of work be disrupted .In many work measurement is very necessary like in scientific works

A roller coaster has a velocity of 25 m/s at the bottom of the first hill. How high was the hill?
PLEASE HELP

Answers

Answer:

The height of the hill is "31.85 m".

Explanation:

The given value is:

Velocity,

v = 25 m/s

As we know,

⇒ [tex]Kinetic \ energy =Potential \ energy[/tex]

i.e,

⇒ [tex]mgh=\frac{1}{2} mv^2[/tex]

⇒    [tex]gh=\frac{1}{2} v^2[/tex]

⇒      [tex]h=\frac{v^2}{2g}[/tex]

On substituting the given value, we get

⇒      [tex]h=\frac{(25)^2}{2\times 9.81}[/tex]

⇒         [tex]=\frac{625}{19.62}[/tex]

⇒         [tex]=31.85 \ m[/tex]

The height of the hill will be "31.85 m".

Given;

Velocity, v = 25 m/s

We know the relation,

→ [tex]Kinetic \ energy (K.E) = Potential \ energy (P.E)[/tex]

or,

→ [tex]mgh = \frac{1}{2}mv^2[/tex]

or,

→    [tex]gh = \frac{1}{2}v^2[/tex]

         [tex]h = \frac{v^2}{2g}[/tex]

By putting the values, we get

            [tex]= \frac{(25)^2}{2\times 9.81}[/tex]

            [tex]= \frac{625}{19.62}[/tex]

            [tex]= 31.85 \ m[/tex]

Thus the response above is right.

Learn more about velocity here:

https://brainly.com/question/15447166

PLEASE ANSWER MY QUESTION​

Answers

Answer:

a) 4

b) 5

c) 2s

d) 10 m/s

e) 5-10m/s^2

want to zøom?

Answer:C 4:8 yw have a nice day

As frequency increases ______ decreases

A. Wavelength
B. Amplitude
C. Pitch
D. Volume

Answers

Answer:

a

Explanation:

wavelength and frequency are inversely related

The answer is A. Wavelength

How does a a magnet and paper clips relate to magnetic forces?

Answers

Answer:

they relate because one may be metal but they are both metal and they can be strong together if they are connected

Explanation:

they just are

Which air mass would form over warm water?(1 point)

maritime tropical

continental tropical

continental polar

maritime polar

Answers

continental tropical i think

Answer:

A.) Maritime Tropical (mT)

Explanation:

Continental tropical is the air mass that forms over warm land.

Maritime Polar is the air mass that forms over cold water.

Continental polar is the air mass that forms over cold land.

So therefore A or Maritime Tropical is the correct answer

Why do hot spots form a “chain of volcanoes?

Answers

because earth has lava underneath us all and it makes earthquakes and etc things like that

A football is thrown due north across a 40 meter river and it takes 2 seconds to cover that distance.

10. What is the speed of the football in meters per second?

11. What is the velocity of the football in meters per second?

HELP DUE TODAY!!

Answers

Answer:

I. Speed = 20m/s

II. Velocity = 20m/s due North.

Explanation:

Given the following data;

Distance = 40m

Time = 2secs

To find the speed;

Mathematically, speed is given by the formula;

[tex]Speed = \frac{distance}{time}[/tex]

Substituting into the equation, we have;

[tex]Speed = \frac{40}{2}[/tex]

Speed = 20m/s.

In physics, we use the same formula for calculating speed and velocity. The only difference is that speed is a scalar quantity and as such has magnitude but no direction while velocity is a vector quantity and as such it has both magnitude and direction.

[tex]Velocity = \frac{distance}{time}[/tex]

Therefore, the velocity is 20m/s due North.

At divergent boundaries, hot mantle rock rises and
occurs.

Answers

The answer is decompression melting

A bicyclist moves at a constant speed of 6 m/s. How long it will take for the point bicyclist to move 36 m?​

Answers

Answer:

6 seconds

Explanation:

make me brainliest

Answer:

Somuchcringe answered correctly you mark him brainliest

Explanation:

A fly travels along the x-axis. His starting point is x = 16 m and his ending point 15x = - 25 m. His flight lasts 4.0 seconds How far has he flown, what is his displacement , what is his speed and what is his velocity?

Answers

Explanation:

Starting position at x  = 16m

Ending position at x  = -25m

Time of flight  = 4s

Unknown:

Distance flown  = ?

Displacement  = ?

Speed  = ?

Velocity  = ?

Solution:

To find the distance flown, we should understand that the body is moving on the x - plane;  

  So distance  = 16 + 25  = 41m

Displacement is 41m to the left or -x axis

Speed is the distance divided by the time taken;

      Speed  = [tex]\frac{distance}{time}[/tex]   = [tex]\frac{41}{4}[/tex]   = 10.25m/s

Velocity is 10.25m/s along -x axis

How long does it take an object to travel 375 m at a rate of 25 m/s?

Answers

Answer:

15s

Explanation:

Given parameters:

Distance traveled  = 375m

Speed = 25m/s

Unknown:

Time taken = ?

Solution:

To solve this problem, we make time the subject of the speed equation.

    Speed  = [tex]\frac{distance}{time}[/tex]  

  Time  = [tex]\frac{distance}{speed}[/tex]  

 Now insert the parameters and solve;

  Time  = [tex]\frac{375}{25}[/tex]   = 15s

A car travels for 50mph for 5 hours, then for 30mph for another 3 hours in the same direction. What is the average speed the motorcycle traveled?

Answers

Answer:

42.5mph

Explanation:

The computation of the average speed is shown below:

As we know that

Speed = Distance ÷ Time

ANd, distance = Speed × time

So, the distance would be

= (50 × 5 hours) + (30 × 3)

= 250 + 90

= 340 miles

And, the total time taken is 8 hours

So, the average speed is

= 340 miles ÷ 8 hours

= 42.5mph

Which of the following would reduce wind erosion
Limiting irrigation
Cutting down trees
Planting vegetation
Clearing away dead leaves

Answers

planting vegetation would reduce wind erosion.
Answer:Planting vegetation

A 40 kg dog is sitting on top of a hillside and has a potential energy of 1,568 J. What is the height of the hillside? (Formula: PE = mgh)

3.9 m
4.0 m
39.2 m
40.0 m

Answers

Answer:

B

Explanation:

Luke stands on the edge of a roof throws a ball downward. It strikes the ground with 100J of kinetic energy. Luke now throws another identical ball upward with the same initial speed, and this too falls to the ground. Neglecting air resistance, the second ball hits the ground with kinetic energy of____J

A) Less than 100
B) 100
C) 200
D) More than 200

Answers

A. Less than 100 this the answer

Im struggling on my physics work about velocity​

Answers

Answer:

53.8

Explanation:

Knowns:

Distance - 1,400

Speed - 52

Unknowns:

Velocity - ?

V = 2([tex]\frac{Distance}{Time}[/tex])

V = 2([tex]\frac{1,400}{52}[/tex])

V = 2(26.9)

V = 53.8

PLEASEEE HEPPP!!!!!
Which material would result in the greatest amount of energy transfer?

An absorber that is dark in color and rough.
A reflector that is dark in color and smooth.
An absorber that is light in color and rough.
A reflector that is light in color and smooth.

Answers

Answer:

A. The first option: An absorber that is dark in color and rough.

Explanation:

a material absorbs - or transfers the most thermal energy when it is dark in color and rough in texture.

The material that would result in the greatest amount of energy transfer will be an absorber that is dark in color and rough.

What is an absorber?

A piece of a substance called an absorber is used to absorb a few of the energy of an incoming particle.

Depending on the application, absorbers can be manufactured of a range of materials, including lead, tungsten, and liquid hydrogen.

The majority of absorbers are found in particle detectors, but they are also utilized in particle accelerators to protect their components from radiation damage.

The material that would result in the greatest amount of energy transfer will be an absorber that is dark in color and rough.

Hence option A is correct.

To learn more about the absorber refer to the link;

https://brainly.com/question/23461193

You are walking from your math class to your science class. You are carrying books
that weigh 20 N. You walk 45 m down the hall, climb 15 m up the stairs, and then
walk another 30 m to your science class. What is the total work performed on your
books?

Answers

Answer:

1800J

Explanation:

Given parameters:

Weight of the book  = 20N

Total distance covered  = 45m + 15m + 30m  = 90m

Unknown:

Total work performed on the books  = ?

Solution:

To solve this problem we must understand that work done is the force applied to move a body through a certain distance.

So;

    Work done  = Force x distance

  Work done  = 20 x 90  = 1800J

URGENT!!! TIMED!!!
A 130-kg football player runs at a speed of 8.0 m/s toward a 110-kg player who is standing still. After the big player tackles the smaller player, they fall together. With what speed do they fall?

Answers

Answer:

v₃ = 4.33 [m/s]

Explanation:

This problem can be solved by the conservation of linear momentum, where momentum is preserved before and after the crash or collision.

For this case, the following equation will be constructed. With values before the collision to the left of the equal sign and after the collision to the right of the equal sign.

[tex](m_{1}*v_{1})+(m_{2}*v_{2})=(m_{1}+m_{2})*v_{3}[/tex]

where:

m₁ = mass of the big football player = 130 [kg]

m₂ = mass of the second football player = 110 [kg]

v₁ = velocity of the big football player before the collision = 8 [m/s]

v₂ = velocity of the second football player before the collision = 0 (who is standing still).

v₃ = velocity of the two players after the collision [m/s]

Now replacing:

[tex](130*8)+(110*0)=(130+110)*v_{3}\\1040 = 240*v_{3}\\v_{3}=4.33[m/s][/tex]

If a steel block has a mass of 25.6 kg and is pushed with a force of 674 N, what is its acceleration after the force is applied?

26.3 m/s^2
17300 m/s^2
26.33 m/s^2
52.3 kg m/s

Answers

Answer: 26.3 m/s²

Explanation:

F = mass x acceleration

674 N = (25.6 kg)(a)

674/25.6 = 26.3

a = 26.3 m/s²

A slingshot is fired with an initial velocity of 100 m/s at an angle of 55° follows a parabolic trajectory and hits a stationary balloon at the top of its path. With what horizontal speed does the slingshot pebble hit the balloon?

Answers

Answer:

The horizontal speed with which the slingshot hits the balloon is approximately 57.358 m/s

Explanation:

The given parameters of the slingshot motion are;

The initial velocity of the slingshot, v = 100 m/s

The angle (to the horizontal) at which the slingshot is fired makes, θ = 55°

The path of the slingshot which hits the stationary balloon at the top of its flight = Parabolic trajectory

The horizontal component of the velocity = vₓ = v·cos(θ) = Constant

vₓ = 100 × cos(55°) ≈ 57.358

The horizontal speed with which the slingshot hits the balloon = vₓ ≈ 57.358 m/s.

Describe the disadvantages of using uranium-238 for dating.

Answers

Explanation:

Mostly in metamorphic or lava materials is uranium-238 contained. Then no fossil could be estimated utilizing U 238 specifically. They should never be used combined due to the huge variations in the half-life of Carbon 14 with Uranium-238. It is only possible to be using carbon 14 to classify fossil from a very current generation.

Which of these is a result of gravitational lensing?
O the formation of multiple images of the same object
O the bending of light in an accelerating reference frame
O the curvature of space-time

Answers

Answer:

Answer is the formation of multiple images of the same object .

Explanation:

I hope it's helpful!

Un atleta de helterofilia necesita levantar una barra de pesas, si necesita aplicar una fuerza para levantarla ¿cuales son los variables que intervienen para poder hacerlo?

Answers

Answer:

Se necesita la información de las siguientes variables:

(i) Fuerza normal entre los pies y la superficie.

(ii) Masa del atleta de halterofilia.

(iii) Masa de la barra de pesas.

(iv) Aceleración gravitacional.

(v) Fuerza normal entre la barra de pesas y la superficie.

(vi) Aceleración neta del centro de gravedad del sistema.

Explanation:

Sea el conjunto del atleta de halterofilia y la barra de pesas el sistema físico a estudiar. El fenómeno de levantamiento puede modelarse como traslación pura. Por las leyes de Newton tenemos que se necesita las siguientes variables para determinar la magnitud de la fuerza para levantarla (fuerza normal entre la mano y la barra de pesas) se requiere las siguientes variables:

(i) Fuerza normal entre los pies y la superficie.

(ii) Masa del atleta de halterofilia.

(iii) Masa de la barra de pesas.

(iv) Aceleración gravitacional.

(v) Fuerza normal entre la barra de pesas y la superficie.

(vi) Aceleración neta del centro de gravedad del sistema.

Tonya and Mario are asked to use a pan balance to find the mass of the same rock. Tonya finds the rock's mass to be 680 grams. Mario finds the rock's mass to be 672 grams. Which is the best explanation for the difference in their measurements?

A. Either Mario or Tonya measured the mass of the rock incorrectly on the pan balance.


B. The rock was cold when Tonya measured its mass and hot when Mario measured in mass.


C. The rock changed in size between the time Tonya measured it and the time Mario measured it.


D. The rock broke before Mario measured it. So the mass of the two pieces together was less than when Tonya measured it.

Answers

Answer:

A or D i put a

Explanation:

Answer:  Its Either Mario or Tonya measured the mass of the rock incorrectly on the pan balance.

Explanation: ...

PLEASE HELP!! A 2.0 kg moving cart hits a spring with a spring constant 50.0 N/m. Assume the system is frictionless. When the cart has come to rest, how far has the spring compressed?

Answers

Explanation:

A spring has a spring constant, (k), of 3 N/m. It is stretched until it is extended by 50 cm. Calculate the elastic potential energy stored by the spring, assuming it is not stretched beyond the limit of proportionality.

First convert centimetres to metres:

50 cm = 50 ÷ 100 = 0.5 m

Then calculate using the values in the question:

Ee=12 k e2

Ee=12×3×0.52

Ee=1.5×0.25

Ee=0.375 J

An object on Earth (g = 9.8 m/s^2) has a weight of 62 N.

1) What is the mass of the object on Earth?

2) What is the mass of the object on Mars?

3) What is the weight of the object on Mars?
(g = 3.7 m/s^2)​

Answers

Answer:

See the answer below

Explanation:

The weight of a body is defined as the product of mass by the acceleration gravitation of space or place.

1)

[tex]W=m*g[/tex]

where:

m = mass [kg]

g = gravity acceleration = 9.8 [m/s²]

Therefore:

[tex]m=W/g\\m=62/9.8\\m=6.32[kg][/tex]

2)

The mass remains the same regardless of where the object or body is located. That is, the mass will be equal on Mars and on Earth.

3)

We used the same equation to determine the weight, using the Mars gravity constant.

[tex]W=6.32*3.7\\W=23.4[N][/tex]

An object with a mass of 5kg is accelerated at
10 m/s^2. Determine the net force on the object.

Answers

Answer:

The net force is 50 Newton

Explanation:

Mechanical Force

According to Newton's second law, the net force exerted by an external agent on an object of mass m is:

F=m.a

Where a is the acceleration produced on the object.  

We are given the mass of the object m=5 kg and its acceleration [tex]a=10\ m/s^2[/tex].

The net force is:

F = 5 * 10

F = 50 N

The net force is 50 Newton

Other Questions
Some people choose to have health screenings performed through genetic analysis what is a direct benefit of this analysis? Write a Console program, let users to enter prices calculate subtotal, tax, and total.- Delcare variable data type as decimal (6 variables needed) decimal apple;- Conver string to decimal from input apple = Convert.ToDecimal(Console.ReadLine());- Do addition for subtotal - Multiplication for tax (0.065M) --- M or m stands for money value, read page 94. - Addition for total - You need to show only two digits after decimal point Console.WriteLine(" Subtotal: ${0}", String.Format("{0:0.00}", subTotal));blank line: Console.WriteLine("")Console.Write(" Apple: $");apple = Convert.ToDecimal(Console.ReadLine()); The table gives an inequality and a number to divide both sides of the inequality by. Identify the new, true inequality. A:B:C:D: The inequality symbol is only reversed when dividing by a___ number. In a chemical reaction, where is the catalyst located A. on the reactant sideB. on the product sideC. above the arrowD. on both sides of the arrow I need the answer tonight What Matches with vertical bar graph?? 6. The depth of the ocean in various places 7. The length of several larhge shopping malls8. The increase in the number of farms from 2002 to 2010 9. How many servings of each food group you should have each day. PLEASEEE HELPPP!! THIS IS URGENTTTT a researcher proposes a model of an enzyme catalyzed reaction in which reactant is converted to a product. The model is based on the idea that the reactant passes through a transition state within the enzyme substrate complex before the reactant is converted to the product. which of the following statements best helps explain how the enzyme speeds up the reaction ? "Well this is where fate, an even bigger force than Priscilla, steps in. It snows that night, a blizzard. The whole town ices up. And school closes down for a week"A) situational irony B) verbal irony C) dramatic irony what type of situational humor would this be? please help asap PLEASE PLEASE HELPILL MARK BRAINLIEST ANSWER A manufacturing company is using a two container kanban system between a downstream and an upstream work center. Each container holds 25 parts. The using work center can handle 100 parts per day. The average elapsed time for the entire cycle is currently 0.4 days. The company is concerned about the efficiency and safety stock policy) of the operation. Required:If the safety stock factor is changed to 0.1 and the number of parts per container is increased to 44, how many containers will be needed? can anyone help with this Name the angle that is supplementary to Ba *1. Son of Isis and Osiris2. Process used at death to preserve bodies3. An Egyptian soul4. Built to honor Egyptian gods. Representational art that appears so convincingly real as to fool the viewer is known as ____________ . 1. The supreme control(A) in a state(B) is in the hands of a minister(C) of law and order(D) who is responsible to the state assembly6. and acts through the inspector General of Police. If a car is moving at a constant velocity of 10 m/s, what is its acceleration?10 m/s10 m/s^20 m/s^21 m/s^2 What were features of the Italian Renaissance?a. Color, realistic portrayal of human figures, perspective, depthb. Individualism, art mirrors the artists view of the world, reflection of artists inner feelings, rejectedprinciples of ClassicalismC. Colorful, grandiose scenes, portraiture, altarpiece artd. Clarity of form, shallow space, revival of classical art, harmony, restraint, civic ideals, ethics Does anyone know what's asked for flvs pre Calc module 4 dba what is 50% of 30 in mathematics There are 3 white counters and 1 black counter in a bag. what is the probability that I take out a black counter?