9 mol of A how many moles of C are formed upon complete reaction of

Answer:

80g

Explanation:

The law of conservation of matter states that matter cannot be created nor destroyed. Basically, whatever mass you have at the beginning of a reaction, should be the same as at the end of the reaction on the product side.

Since here it lets you know that a total of 100g (30g + 70g) were produced on the product side, that means that we started off with 100g in our reactant side.

We have given that one material is 20g on our reactant side but we need the mass of the other. To find the mass of the other material, simply subtract 20g from the total mass created on the product side.

100g - 20g = 80g

The 80g would be the missing amount from the reactant side that isn't stated.

Answer: 189.5g of Ag would be produced from 0.88 moles of Ag2S

Explanation:

The question requires us the amount of Ag, in grams, that would be produced from 0.88 moles of Ag2S, according to the following equation:

To solve this problem, which is a mol to mass stoichiometry problem, we'll need to follow the steps:

moles of Ag2S → moles of Ag → mass of Ag

To do that, we'll need to use the molar mass of Ag (107.87 g/mol) and the mole ratio between Ag2S and Ag, as given by the balanced chemical equation (6 moles of Ag are produced from 3 moles of Ag2S).

We can calculate the number of moles of Ag that would be produced from 0.88 moles of Ag2S as:

3 mol Ag2S -------------------------- 6 mol Ag

0.88 mol Ag2S --------------------- x

Solving for x, we'll have:

Therefore, 1.76 moles of Ag would be produced from 0.88 moles of Ag2S.

Next, we need to convert the number of moles of Ag calculated to its correspondent mass. Knowing that the molar mass of Ag is 107.87 g/mol, we can calculate:

Therefore, 189.5g of Ag would be produced from 0.88 moles of Ag2S.

Answer:

The objective of agricultural chemistry is to preserve or improve the fertility of soil, increase the agricultural yield and improve the quality of the crop. To reach those objectives the agricultural industry uses two types of chemicals.

- Fertilizers: increase soil fertility making crops more productive. They usually are compounds that contain three basic elements: P, K and N.

- Pesticides: control weeds (herbicides), insects (insecticides) and diseases from fungus (fungicides).

answer and explanation

now that we have the x value we can find the equilbrium concentratoins of tehegases

for Iodine

x =0.456

= 0.5-x

= 0.5-0.456

= 0.035mols

concentration = 0.035mols/ 0.250L

= 0.14M

for Bromine

x =0.456

= 0.5-x

= 0.5-0.456

= 0.035mols

concentration = 0.035mols/ 0.250L

= 0.14M

the concentration of the two gases is 0.14M

Answer:CO2

Explanation:

A trick that is quick and easy to use when telling covalent bonds from ionic bonds is to look at the atoms that are bonding. If there is a metal involved, then it is ionic bonding (hence AgF, NaCl. and K2S are not covalent bonding as Ag, Na, and K are all metals.

But to be more specific, ionic bonding happens when two ionic or polar atoms (atoms with non-neutral charges,) come together to balance out their charges (as negative charges will be attracted to positive charges and vice versa); the fancy term for this is electrostatic forces. They (usually) give up electrons to another atom, but do not share electrons. Covalent bonding happens when atoms actually share electrons and have their atomic orbitals overlap, meaning that the electrons actually travel through the surrounding volume of both atoms. Ionic bonded atoms will also separate into ions when in a solvent.

She will keep evidence separated so it doesn’t get contaminated demonstrates the understanding of Locard’s Exchange Principle and is denoted as option C.

This principle states that an individual who commits a crime will bring something into the crime scene and leave with something from it. This also explains that they can be used as evidence during investigation by the appropriate authorities.

Since we are aware that new substances are always brought into and carried away from the crime scene then it is best to keep the evidence separated so it doesn’t get contaminated.

This ensures that the results gotten from the analysis and investigation are accurate and is therefore the reason why option C was chosen as the correct choice.

Read more about Crime scene here https://brainly.com/question/10702774

#SPJ1

The question requires us to calculate the number of moles of each element (magnesium, chlorine and oxygen) in 8.30 moles of the compound magnesium perchlorate (Mg(ClO4)2).

From the molecular formula of magnesium perchlorate we can take the following information:

- in 1 mol of Mg(ClO4)2, there is only 1 mol of Mg;

- in 1 mol of Mg(ClO4)2, there are 2 moles of Cl;

- in 1 mol of Mg(ClO4)2, there are 8 moles of O.

With the information above, and knowing that the amount of Mg(ClO4)2 given by the question was 8.30 moles, we can calculate the amount, in moles, of each element:

1 mol Mg(ClO4)2 --------------- 1 mol Mg

8.30 mol Mg(ClO4)2 ---------- x = 8.30 mol Mg

1 mol Mg(ClO4)2 --------------- 2 mol Cl

8.30 mol Mg(ClO4)2 ---------- y = 2 x 8.30 mol Cl = 16.6 mol Cl

1 mol Mg(ClO4)2 --------------- 8 mol O

8.30 mol Mg(ClO4)2 ---------- z = 8 x 8.30 mol O = 66.4 mol O

Therefore, there are 8.30, 16.6 and 66.4 moles of Mg, Cl and O in 8.30 moles of magnesium perssufate.

The mass of the copper that is obtained is 97.2 tons.

We can define the term combustion as the procedure by which a substance can be burnt in oxygen. We can also be able to refer to the process as roasting the object in the air. It is an oxidation reaction.

Having said all all of these, the reaction equation can be written as;

[tex]Cu_{2} S + O_{2} ------ > 2Cu + SO_{2}[/tex]

We know that the percent of the copper that it contains can now be used when we are trying to compute the mass of the copper that can be obtained from the process as we are going to have in the question that is at hand here to solve.

We are now going to proceed to see the mass of the copper that can be produced from the 300 tons of the copper I sulfide ore given.

Thus;

The mass of copper that can be obtained is;

3.24/100 * 3000 tons

= 97.2 tons

Learn more about combustion:https://brainly.com/question/15117038

#SPJ1

Answer: One centimeter per month.

Explanation: Technically speaking, human hair grows about 1/2 inch a month or 6 inches a year.  1/2 inch is approx 1.27 centimeters, or in other words, one centimeter a month.  Therefore, that's your answer.

Let me know if I got it right! :)

Answer:

1 centimeter per month

Explanation:

Human hair typically grows 6 inches in a year. Since there's 12 months, we can tell that hair grows 1/2 an inch per month. 1/2 an inch is about 1 cm.

Please mark brainliest!

Answer:

The pH of the solution is 1.60.

Explanation:

1st) It is necessary to write and balance the chemical reaction:

Now we can see that 1 mole of NaOH reacts with 1 mole of HCl.

2nd) We have to calculate the moles contained in 15mL of 0.10M NaOH solution and the moles contained in 25mL of 0.10M HCl solution:

• Moles contained in NaOH solution:

• Moles contained in HCl solution:

Now we know that there are 1.5x10^-3 moles of NaOH and 2.5x10^-3 moles of HCl.

3rd) According to the stoichiometry of the reaction, 1 mole of NaOH reacts with 1 mole of HCl, so in this case, 1.5x10^-3 moles of NaOH will react with 1.5x10^-3 moles of HCl, because NaOH will be the limiting reactant and HCl will be the excess reactant.

So, now we have to calculate the excess of HCl:

2.5x10^-3moles - 1.5x10^-3moles = 1x10^-3moles

Now we know that there are 1x10^-3 moles of HCl left.

4th) Excess HCl will remain dissociated into H+ and Cl-, according to the following equation:

That means that for every mole of HCl, 1H+ dissociates. So, in this case, there are 1x10^-3 moles of H+.

Remember that these moles are contained in 40mL, so the molarity of H+ is 0.025M:

5th) Finally, we can calculate the pH of the solution, by replacing the H+ concentration in the pH formula:

So, the pH of the solution is 1.60.

In simple terms a covalent bond is when we have sharing of electrons, which means there is no polarity being formed when the elements are bonded, this is more likely to occur with atoms with high electronegativity, or same pair of elements, like O2, where we have O - O (Oxygen bonded with Oxygen), since they have the same electronegativity, there is no charge being formed

The same can not be told for ionic bonds, where we have very different elements being bonded together, with a big electronegativity difference, which means we have polarity being formed (which basically means that we have charge in the compound)

One way to find out if a compound is covalent or ionic is by checking their positions in the periodic table, for example, let's analyze our question

We have:

A) Fluorine - Fluorine, here we have a classical example of covalent bond, since there is no "stronger" element, pulling the electrons towards its side, they are the same, hence, the same strength

B) Carbon - Chlorine, we have two non-metals, with a relatively high electronegativity each one of them, so there is ions being formed, therefore it is covalent

C) Potassium - Oxygen, in this case we have a metal and non-metal bonding together, and since potassium has only 1 electron in its valence shell, it will easily give up this electron to another element, therefore K will receive a positive charge (which means loss of electron) and oxygen will receive a negative charge (which means gain of electron), and this is an ionic bond

D) Oxygen - nitrogen is the same case as letter B

It is also possible to check an electronegativity table, in which there are some rules that helps you understand if a compound is more likely to be covalent or ionic

5998kJ

Given the reaction between ethanol and oxygen expressed as:

For the product

We have 2 moles of CO2 and 3 moles of water. The total bond energy in the product is expressed as:

Hence the total energy transferred to build all the bond energy in the product is 5998kJ

Answer:

Atoms

Explanation:

Answer:

atoms

Explanation:

its right, trust

Answer:

bond to form a covalent bond

Explanation:

a covalent bond is formed when two atoms share electron pairs.

Answer:

Explanation:

Here, we want to get the definition of a weak base

A weak base is a base that does not dissociate completely in solution.

What this means is that when the base is placed in a solution, its dissociation into the corresponding metallic and hydroxide ions is incomplete

A. The balanced equation for the reaction is given as

C₃H₈ + 5O₂ -> 3CO₂ + 4H₂O

B. The mass (in grams) of carbon dioxide that can be produced by burning 20.0 pounds of propane is 27216.49 g

A. Balance equation

The balanced equation for the combustion of propane is:

C₃H₈ + 5O₂ -> 3CO₂ + 4H₂O

B. How to determin the mass (in grams) of CO₂ produced

The mass (in grams) of CO₂ produced from the reaction can be obtained as follow:

From the balanced equation above,

0.097 pound of C₃H₈ reacted to produce 132 g of CO₂

Therefore,

20 pound of C₃H₈ will react to produce = (20 × 132) / 0.097 = 27216.49 g of CO₂

Thus, the mass of CO₂ produced is 27216.49 g

Learn more about stoichiometry:

https://brainly.com/question/9526265

#SPJ1

Answer

Only the hydrogen atom attached to the oxygen atom is capable of forming hydrogen bonds. A dipole does not form between the hydrogen and the carbon atoms.

Explanation

The description of the hydrogen bonds in an ethanol molecule is that hydrogen bonding can occur between ethanol molecules, although not as effectively as in water. The hydrogen bonding is limited by the fact that there is only one hydrogen in each ethanol molecule with a sufficient δ+ charge.

Therefore only the hydrogen atom attached to the oxygen atom is capable of forming hydrogen bonds. A dipole does not form between the hydrogen and the carbon atoms.

The second option is the correct answer.

Kinetic energy refers to the work required to accelerate a body from an initial state of rest to infinite speed. So kinetic energy is related to the motion and speed of a body.

So the answer will be C. motion

The moles of electrons are needed to produce 53.5 mole of Zn is 107 moles.

Electrons are defined as a subatomic particle having a negative charge that makes up the nucleus of an atom together with protons and neutrons.

The electron has an intrinsic angular momentum of a half-integer number and has a mass that is around 1/1836th that of the proton. The quantum state of any two electrons cannot be identical.

The chemical reaction for solid zinc is

Zn²⁺  +  2e⁻  =  Zn (s)

When one mole of zinc ions receive two moles of electrons, one mole of zinc is created.

Electrons equal two moles to form one mole of solid zinc.

The electrons needed to create the 53.5 mole of zinc will provide 2 53.5 = 107 mol.

Thus, the moles of electrons are needed to produce 53.5 mole of Zn is 107 moles.

To learn more about electrons, refer to the link below:

https://brainly.com/question/1255220

#SPJ1

The parts of the neuron include (A) dendrites.

As it is given in the description, Synapses are also found on dendrites.

Therefore, the parts of the neuron include (A) dendrites.

To learn more about dendrites, click on the link:

https://brainly.com/question/11364230

#SPJ13

The original pressure of argon in the cylinder is 5.68 atm.

The original pressure of argon in the cylinder is calculated as follows.

Apply the concept of molar ratio or molar proportion to determine the original pressure of argon in the cylinder.

Pr = [(Pn x Vn) + (Pa x Va) ] / (Vn + Va)

where;

7.15 = [(11.08 x 4.5) + (12 x Pa)] / (4.5 + 12)

7.15(4.5 + 12) = 49.86 + 12Pa

117.98 = 49.86 + 12Pa

68.12 = 12Pa

Pa = 68.12/12

Pa = 5.68 atm

Thus, the original pressure of argon in the cylinder is determined by applying concept of molar ratio.

Learn more about original pressure of gas here: https://brainly.com/question/25736513

#SPJ1

Electron capture occurs when one of the electrons in the atom is captured by the atom's nucleus. The captured electron combines with one proton to form a neutron.

We have to find the nuclide that is produced when the aluminum-28 undergoes an electron capture.

If we look for the atomic number of Al in the periodic table we will see that it is 13. That means that it has 13 protons. Then we are given the atomic mass of aluminum, it is 28. That means that if we add the number of protons and the number of neutrons we get 28.

atomic mass = n° of protons + n° of neutrons = 13 + 15 = 28

atomic number = n° of protons = 13

The nucleus of the aluminum atom will capture one electron that will combine with a proton of the nucleus to form a neutron. So the atomic number will change because it will have 1 proton less. But the atomic mass won't change because we are losing one proton but winning a neutron, so it remains the same. After the electron capture, the new nuclide will have:

atomic mass nuclide = n° of protons + n° of neutrons = 12 + 16 = 28

atomic number nuclide = n° of protons = 12

If we look for the element that has an atomic number of 12 in the periodic table we will see that it is magnesium.

Finally we can express this like a reaction:

28 0 28

Al + e --------> Mg

13 -1 12

Answer:

28

Mg

12

Answer:

Chlorine and Bromine are also halogens so they are similar to fluorine

This elements or substances that are not a metal are called non-metals.

I think that the answer is Non-metal

Answer: Tetrachloroethylene is an nonpolar molecule.

To convert the given number to regular notation, we have to move the decimal dot as many times as indicated by the exponent of 10. In this case, that exponent is -4, so we have to move the decimal dot 4 times to the left:

It means that the answer is 0.000875.

Remember: solution = NaOH + water

Volumen here = 1 L

Molecular mass NaOH = 39.99 g/mol

Answer: Contration = 14.32 M

The electron configurations that are not valid among the options are 1s²2s²2p 3s 3p 4s²4d¹04p5 and 1s²2s²2p 3s³3d5. Options 1 and 2.

The electron configuration of atoms using the various orbital levels follows the order: 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p, 5s, 4d, 5p, 6s, 4f, 5d, 6p, 7s, 5f, 6d, 7p.

Also, according to Afbau principle, orbitals with low energy levels are filled with electrons before orbitals with higher energy levels.

Using the above,  1s²2s²2p 3s 3p 4s²4d¹04p5 is incorrect for some reasons:

1s²2s²2p 3s³3d5 is incorrect because:

The remaining electron configurations are correct with correctly placed electrons in the various orbitals.

More on electron configurations can be found here: https://brainly.com/question/14283892

#SPJ1

The hardness of water sample with 35.1 ppm Mg²⁺ and 65.8 ppm Ca²⁺ is 6.215 ppm is 100.9 ppm

Hardness of water is a parameter which is defined by the amount of dissolved minerals in the water like calcium and magnesium. Thus, hard water would have high amount of dissolved minerals in the water. They are sweeter in taste and are good for bones and teeth because of the mineral content

Total hardness of water = Degree of hardness of Mg ²⁺ + Degree of hardness of Ca ²⁺

Degree of hardness Mg ²⁺ = 35.1 ppm

Degree of hardness of Ca ²⁺ = 65.8 ppm

Total hardness = 35.1 + 65.8 = 100.9 ppm

To know more about Hardness of water

https://brainly.com/question/20936443

#SPJ1