What are the use of logic gates in the field of robotics?
Answer:
JESUS IS LORD AND NO ONE CAN GET TO THE FATHER EXCEPT BY THROUGH HIM JESUS IS THE ANSWER.
how do batteries store energy and release electricity on demand.
Answer:
Batteries work by storing negative photons on one side then transfering them to the positive side and everything thats inbetween
Explanation:
Why are wrenches heat treated and chrome plated?
Answer:
To minimize wear, to prevent seizing or galling, to reduce friction and facilitate cleaning, and to minimize or prevent corrosion.
Carmen is having her basement refinished. She notices that the flooring was installed hastily and is uneven. Who should she talk to about the problem?
Answer:
the answer is foreman (lmk if it's wrong)
If the wood needed to lay a kitchen floor was determined to be precisely 287.5 square feet, how much should be purchased
Answer:
316 pieces of wooden floor tiles
Explanation:
From research, the standard size of floor tiles used in kitchen is mostly:
1 ft x 1 ft in dimension.
Now, we are told that the area is precisely 287.5 square feet.
Thus, number of tiles required is;
n = 287.5/(1 × 1)
n = 287.5 tiles
Usually, we make room for 10% wastage.
Thus, we will provide;
N = 287.5 × 1.1
N = 316.25 ≈ 316 pieces of tiles
What will happen to the aircraft speed if the drag force becomes more than the thrust force ? Help
Answer:
Explanation:
If the forces of thrust and drag are balanced, an aircraft doesn't move. It is only when thrust overcomes drag that a plane moves forward. When drag is greater than thrust, the plane is pushed backward,
please
Brain-list it or support me at my U-Tube channel " ZK SOFT&GAMING " I will be thankful
hello it of JOSPHE BRO DONT ANSWER
Match the task to the required education level.
classifies wildlife around a geothermal plant,conducts environmental impact studies of geothermal plants, and analyzes the distribution and movement of water at a geothermal plant site.
masters degree, bachelors degree, and doctorate degree.
Answer: See explanation
Explanation:
For a bachelor's degree, one takes several subjects or courses that relates to one's main course. For a master's degree, one focuses on his or her main course while a doctorate degree is usually research based. Based on the explanation, the question is answered below.
• Classifies wildlife around a geothermal plant = Bachelor degee
A bachelor's degree is required here as it doesn't involve research and it just involves an easy classification.
• Conducts environmental impact studies of geothermal plants = Masters degree
This relates to one major aspect which is regarding geophysics. Hence, the Masters degree is appropriate.
• Analyzes the distribution and movement of water at a geothermal plant site = Doctorate degree
This is highly researched based, hence the doctorate degree will be vital.
What problem of the low-bid process is the negotiated price process intended to solve?
O The negotiated price process places a greater emphasis on lowering cost than the low-bid process.
The negotiated price process focuses on contractor qualifications instead of simply seeking the lowest-bidding contractor.
O The negotiated price process is easier to manage than the low-bid process.
O The negotiated price process is faster than the low-bid process.
Answer:
D
Explanation:
.
Answer:
The negotiated price process focuses on contractor qualifications instead of simply seeking the lowest-bidding contractor.
Explanation:
I took the test
What are examples of Energy careers? Check all that apply. Carpenter Video Editor Electrical Power-Line Installer Printing Press Operator Power Plant Operator Automotive Service Attendant
Answer:
C,E,F
Explanation:
Right on edge 2021
Examples of Energy careers are Electrical Power-Line Installer, Power Plant Operator, and Automotive Service Attendant.
An energy career refers to a career in the energy industry. This can mean the work or jobs related to the energy sector.
A career in the energy industry can be different, ranging from communicators to engineers, specialists, etc. This means that whatever occupation that involves the transfer of energy for consumption are all energy careers. Such types of occupations can be found in numerous sectors that included energy transmission, distribution, and education of such energy for public consumption.Careers in the energy sector require expertise in the transmission, distribution, and education of how to use energy for human consumption. Such careers may include electrical power-line installer, power plant operators, and automotive service attendant.
Learn more about energy careers here:
brainly.com/question/9369455
Technician A states that recalls are called for by a manufacturer only when enforced by law. Technician states that manufacturers may choose to voluntarily conduct a recall to ensure the sate operation of the vehicle . Who is correct?
Answer:
Explanation:
C
Need help with this question pls help me will mark brainiest
Need help with these 2 questions pls help me with them will mark brainiest.
Answer:
1st question : False
2nd question : False
Explanation: 1st question : they will be donated to people who actually need them , taking another when you don’t need another is selfish and ignorant
2nd question : make a meal? those arent fit for cooking in.
Briefly review the steps of the Engineering Design Process as they apply to documenting your work and communicating your results. Which steps are the most important to include in your presentation and why?
Answer:
What is the solution to the system of equations:
A lymphocyte is a type of white blood cell that is part of the immune system. There are two main types of lymphocytes: B cells and T cells. The B cells produce antibodies that are used to attack invading bacteria, viruses, and toxins.
Explanation:
While discussing diagnostic procedures: Technician A says that after the visual inspection has been performed, the DTCs should be cleared from the memory of the PCM. Technician B says that serial data can be helpful when there are no DTCs but there is a fault in the system. Who is correct?
a. Technician A
b. Technician B
c. Both A and B
d. Neither A nor B
Answer:
C the answer is C
Explanation:
yea I hope this helps...
Answer: c. Both A and B
Explanation: Technician A says that knowing if there are any stored diagnostic trouble codes (DTCs) may be helpful when checking for related technical service bulletins (TSBs). Technician B says that only a factory scan tool should be used to retrieve DTCs. Technician A says that reprogramming a PCM using the J2534 system requires a factory scan tool. Technician B says that reprogramming a PCM using the J2534 system required Internet access.
Inputs, outputs and side effects of a crane
Answer:
A crane is a machine that is used to move heavy materials both vertically and horizontally. The crane is equipped with cords, ropes or chains that move along the pulleys, transmitting force to lift heavy weights beyond human capabilities.
There are many different types of cranes and each type has specific uses. The smallest cranes are used in workshops, the largest tower cranes in the construction of skyscrapers. Floating cranes can be used to build oil rigs or rescue sunken ships. Cranes are often temporary structures, either attached to the ground or on a mobile structure, such as on a truck (called a mobile crane).
System Integration summary
Answer:
System integration can be defined as the progressive linking and testing of system components to merge their functional and technical characteristics into a comprehensive interoperable system.
Explanation:
....
A data record of all of someone's online activity is called a
Answer:
The answer is computer cookies.
Explanation:
Smartness :D
Answer:
Digital footprint
Explanation:
it was the answer on my test and in the book
9. Which of the following insurance policies should you obtain to cover your lost income if you are injured in a collision?
Answer:
Collision insurance coverage
Explanation:
This type of coverage will pay to repair or replace the car if a damage is acquired in an accident with another vehicle or an object such as a building, a tree or a fence.
It is normally a requirement by the lender. It covers the following;
Collision with another vehicleCollision with an object/ a tree / a fenceA single car accident that experienced a rolling or a falling overif i build thing a and thing a builds thing b did i build thing b
Answer:
YesExplanation:
If you build thing "a" and thing "a" builds thing "b" you indirectly build thing "b".
Pls help me with these 3 ez questions will mark brainiest
Will the ABS system activate when you push on the brake pedal at 25MPH? Yes/No
A faulty _______________ will allow gear lube to saturate brake shoes in a rear drive vehicle.
What is the term used to describe how large the inside diameter of a drum can be before it must be replaced?
20 points
Answer:
yes
Explanation:
Mark each one as either Potential or Kinetic Energy?
a. Moving Cart
b. Tree Branch
Bent Car Fender
d. Balloon Filled with air
Person inside a moving car
f. Balloon floating around a room
While discussing the MIL on OBD II systems: Technician A says that the MIL will flash if the PCM detects a fault that would damage the catalytic converter. Technician B says that whenever the PCM has detected a fault, it will turn on the MIL. Who is correct?
a. Technician A
b. Technician B
c. Both A and B
d. Neither A nor B
Answer:
"C"
Explanation:
Answer: c. Both A and B
Explanation: The codes are cleared with a scan tool, Power to the PCM is disconnected and The vehicle is driven on three consecutive trips with a warm up cycle and meets all code set conditions without the PCM detecting any faults.
What are watts equal to?
newton-meters
joules per secon
meters per seconds
newtons per meter
Answer:
joules per second
equivalent to one ampere under a pressure of one volt.
Technician A says that the enable criteria are the criteria that must be met before the PCM completes a monitor test. Technician B says that a drive cycle includes operating the vehicle under specific conditions so that a monitor test can be completed. Who is correct?
a. Technician A
b. Technician B
c. Both A and B
d. Neither A nor B
Answer:
"A"
Explanation:
Answer: a. Technician A
Explanation: Technician A states that standardized communications protocol will allow any OBD II scanner to retrieve DTC's. Technician B states that the generic protocol will generate limited scanner information that can be used to pass or fail an emission test. the enabling criteria should be accomplished during normal driving. Technician B states that individual pieces of the enabling criteria must be followed in sequence or the monitor may not run.
Where would you expect to look for a sprite with coordinates (10, 10)?
Group of answer choices
the bottom left of the screen
the top left of the screen
the bottom right of the screen
the top right of the screen
What are the inputs, outputs and side effects of a PSP?
Answer:
Side effects - sudden loss of balance/ repeated falls
Outputs - sever sickness and could me factual
Inputs/corrections of this- medications and experimental treatments to help slow the process of deterioration
What's the price of MDF wood? Is it cheap or expensive??
That's all, thank you.
Answer:
it is gud
Explanation:
ggfl
Need help with these ez questions will mark brainiest
Hi! Here's the answers!
True
C
True
Answer:
True, C, True.
Explanation:
A. True - In order to give appropriate feedback you have to listen
B. C - Employability skills are things that you would be hired and expected for and expected to continue using throughout your job.
C. True - Thinking critically and solving problems are transferable job skills.
Hope this helps :)
